"Error in creating error file" message

Tried to install Palm Desktop 6.2 that came with my new Centro and at the end the message "Error in creating error file" keeps popping up numerous times.
What can be the reason?
Post relates to: Centro (AT&T)

I was also experiencing the "error in creating error file" message multiple times during installation on my XP Pro system. I googled the error message and found this post plus a reference to a problem with riched32.dll) in in another post. But that didn't help. After quite a bit of troubleshooting on my own, I found the problem. I had moved the "My Documents" folder under "D:\users" to simplify my backups. Apparently the Palm installer needs the "My Documents" folder on the C: drive. I temporarily put "My Documents" back into it's default location under "C:\Documents and Settings" and the Palm installer ran just fine with no error message. I then moved everything back under "D:\users" including the folder "Palm OS Desktop", that was created by the Palm installer and everything has been working fine since.
Thought I'd share this with others, as it's not an obvious fix.
Post relates to: Palm TX

Similar Messages

  • "Unable to save markup: Cannot create output file" message with ISDK

    Hi,
    We have an integration of AutoVue with OpenText Livelink, and we're seeing that if users open a document, and then work on adding mark-ups for a long time (3 hours) without saving the mark-up when the user saves the markup they get an error message "Unable to save markup: Cannot create output file". If they then press the save button they get the out-of-the-box AutoVue 'Save Markup File As' dialog.
    The ISDK DMS integration servlet and VueServlet servlet are both running under Tomcat with 740 minute session timeout set for the servlet.
    When we look at the logs we're not seeing any attempts to save the mark-up, which is confusing.
    It looks as though the link between the AutoVue applet and the DMS has been lost.
    Is it possible to specify session time-outs in the AutoVue applet?
    Is there a way of checking keep-alives are being sent (if they are ever sent)?
    Help appreciated!
    Thanks
    Paul

    AutoVue default timeout is 30 minutes and is being controlled by the option jvueserver.users.timeout (value set in seconds, default is 1800).
    Adding to the jvueserver.properties the following line:
    jvueserver.users.timeout=50400
    would set AutoVue session timeout to 14 hours (longer than Tomcat session).
    If the issue still persists, the AutoVue session timeout is probably not the cause...
    Edited by: user739124 on Dec 4, 2012 12:02 PM

  • TS2167 i'm getting an error message.. can't create the file "header.jpg." The disk may be damaged or full, or you may not have suuficient access priveleges.

    I need to publish to a local folder on my desk top and I am getting this error message.
    can’t create the file “header.jpg.” The disk may be damaged or full, or you may not have suuficient access priveleges.
    Please help... I need to copy to a disk... it was working fine until I attached a big project, I tried to delete the project, but still not workng.

    Try the following:
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
    3 - launch iWeb and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • When creating pdf file am getting [700]** Message Msg700 not in .ini file ** error

    I am new to adobe output server. Am getting " [700]** Message Msg700 not in .ini file **, [397]** Message Msg397 not in .ini file **, [125]** Message Msg125 not in .ini file ** " while creating pdf file. Please help on this issue.

    Is this a new form, or one that was working before ?  Has something changed on the system ?
    Those errors dont really mean anything, so need to understand more around what is happening - a snippet from the log file just prior to the errors to see what is going on ?

  • Trouble opening a just created Pages file.....error message says I need a newer version of Pages......Apple Store says I have version 5.0.......opening an older Pages file it says I have version 4.3.......can not find any way to try another upgrade to 5.0

    Trouble opening a just created Pages file.....error message says I need a newer version of Pages......Apple Store says I have version 5.0.......opening an older Pages file it says I have version 4.3.......can not find any way to try another upgrade to 5.0........please help......
    Thanks

    Personally, I would not recommend deleting/removing the iWorks 09 folder for several reasons: one is that the new versions have had several functionalities removed and until you decide that you can work with the new one and do not miss any features the older version had, I would leave the old one in place. Personally, I will not be using the new versions.
    The second reason is that you can accomplish what you want using a different approach: simply open a Get Info window of your document and choose which version of Pages you want this to open in - you can also stipulate that all docs like this are opened with whichever particular version.
    FWIW: Once you have edited an old document in the new Pages version, you can no longer open it in the older version. However, you can still export it to the old version.

  • I receive the following error message when trying to publish site changes to iweb: "Can't create the file "shapeimage_2_link_0.png." The disk may be damaged or full, or you may not have sufficient access privileges." Can anyone assist?

    I receive the following error message when trying to publish site changes to iweb:
    "Can’t create the file “shapeimage_2_link_0.png.” The disk may be damaged or full, or you may not have sufficient access privileges."
    Can anyone assist?

    Try the troubleshooting steps under "Fix iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
    ... and then republish.

  • When pressing the "R" on the keyboard to record the following pop up - "Beta-only warning message-not to be localized Can't create record files please report" and then this "error occurred Result= -48"  What does this mean?

    When pressing the "R" key on the keyboard to record the following pops up - "Beta-only warning message-not to be localized.  Can't create record file, Please Report"  I press O.K. and this pops up - "Error occurred Result= -48".  Can't figure out why.  First time I have every had problems>  What's up with this?

    a -48 error is a duplicate filename.
    the first things i'd try are the oddball problems fixes:
    http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Hi All,Error while creating a file in EMIGALL

    Hi All,
            When am creating a File name in Data import screen.
    The process which i had done is :
    I had copied the Migration object DEVICE from std SAP to my company ZTEST and generated the report for this from menu option Migration object --> Generate Report . After that i had selected the option Data import from the same menu option .
    In the Data import screen i had selected radibutton Batch Wrork porc and in the Import file tab i had given the file name as DEVICE.ZDE and pressed the create .When i pressed create the following message  is appearing :
    "Error Opening the file DEVICE.ZDE" .
    if I see the detailed help it is showing the following message :
    Error opening file DEVICE.ZDE
    Message no. EM022
    Diagnosis
    File DEVICE.ZDE could not be opened.
    Procedure
    Check the file name and ensure that the file is not being used in another way.
    pls provide me the solution for the above Issue ASAP.
    regards,
    Bharat

    Hi Bharat,
    First of all make sure that Device file is of .txt with tab deliminated format, before uploading this file please close this file and try. Still if you are facing the same problem then let me know.
    Regards,
    Shailesh

  • After upgrade to CF9, CFIMAGE "Unable to create temporary file" error

    We recently upgraded from CF8 to CF9 Enterprise.  I'm getting an "Unable to create temporary file" error on
    my CFIMAGE resize calls.  We use sandbox security.  I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it?   The same code (and sandbox settings) ran fine in CF8....
    Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
    Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
    The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
    ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
    I need to restart CF to get everything working again.

    Another update.   Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable.  Got an "Unable to create temporary file" error.
    Inserted the following code in the file upload page:
    <cfscript>
    writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
    </cfscript>
    ... and it reveals the temp directory as C:\WINDOWS\TEMP.  Added that to the sandbox, and the CFIMAGE READ is working properly now.
    Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
    For reference, see the section "Sandbox Considerations" at this link:
    http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc

  • Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

    Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
    == This happened ==
    Every time Firefox opened
    == After removing Firefox and Reinstalling it. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

  • Issue with the report oracle.apps.xdo.XDOException:Error creating lock file

    I am getting an error while submitting the XML publisher report in Betsy N0 instance.
    Issue
    Log :- Beginning post-processing of request 145458120 on node BETSYN0DB1 at 22-DEC-2011 05:28:26.
    Post-processing of request 145458120 failed at 22-DEC-2011 05:28:28 with the error message: One or more post-processing actions failed. Consult the OPP service log for details
    Output :- Blank Report
    XML file :- XML file generated without any error
    Output process:-
    [12/23/11 4:28:10 AM] [1213640:RT145480622] Completed post-processing actions for request 145480622.
    [12/23/11 5:16:01 AM] [OPPServiceThread1] Post-processing request 145481427.
    [12/23/11 5:49:30 AM] [OPPServiceThread1] Post-processing request 145481923.
    [12/23/11 5:49:30 AM] [1213640:RT145481923] Executing post-processing actions for request 145481923.
    [12/23/11 5:49:30 AM] [1213640:RT145481923] Starting XML Publisher post-processing action.
    [12/23/11 5:49:30 AM] [1213640:RT145481923]
    Template code: XXWIP_WO_VLVS
    Template app: XXWIP
    Language: en
    Territory: US
    Output type: PDF
    oracle.apps.xdo.XDOException: Error creating lock file
         at oracle.apps.xdo.oa.util.FontCacheManager.getFontFromDB(FontCacheManager.java:320)
         at oracle.apps.xdo.oa.util.FontCacheManager.getFontFilePath(FontCacheManager.java:198)
         at oracle.apps.xdo.oa.util.FontHelper.createFontProperties(FontHelper.java:432)
         at oracle.apps.xdo.oa.util.ConfigHelper.getFontProperties(ConfigHelper.java:166)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5824)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
         at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
         at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
    [12/23/11 5:49:31 AM] [UNEXPECTED] [1213640:RT145481923] oracle.apps.xdo.XDOException: Error creating lock file
         at oracle.apps.xdo.oa.util.FontCacheManager.getFontFromDB(FontCacheManager.java:320)
         at oracle.apps.xdo.oa.util.FontCacheManager.getFontFilePath(FontCacheManager.java:198)
         at oracle.apps.xdo.oa.util.FontHelper.createFontProperties(FontHelper.java:432)
         at oracle.apps.xdo.oa.util.ConfigHelper.getFontProperties(ConfigHelper.java:166)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5824)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
         at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
         at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
    [12/23/11 5:49:31 AM] [1213640:RT145481923] Completed post-processing actions for request 145481923.

    The issue is fixed.
    Our XML Publisher TMP is not defined, so it uses the APPLTMP used by concurrent manager. There is a folder xdofonts/<SID> in $APPLTMP. It contains the fonts used by XML publisher and on the of font file (.ttf) was 0 byte. We copied the ttf file from QA. And it started working.
    Best practice is to define diffent TMP for concurrent managers and XML Publisher.
    Cherrish Vaidiyan

  • I am getting error while creating Control file for a fla file upoad in HANA

    Hi Experts,
    I am getting the following error when I try to create crtrol file for a flat file extraction in SAP HANA.
    Could not execute 'import data into table P935718."COPATBL" from 'COPATBL.csv' record delimited by '\n' fields ...'
    SAP DBTech JDBC: [257] (at 14): sql syntax error: incorrect syntax near "into": line 2 col 1 (at pos 14)
    Here is the code I have used to create control file after I creating the table.
    import data
    into table P935718."COPATBL"
    from 'COPATBL.csv'
        record delimited by '\n'
        fields delimited by ','
        optionally enclosed by '"'
    error log 'P935718.COPATBL.err'
    p935718 is my user ID, COPATBL is my table created, COPABL.CSV is a flat file.
    Please help me in this regard.
    Thanks,
    Guna

    Hello,
    guessing from the error message it looks that you are trying to execute "import data" as SQL command.
    Please note that import data is NOT SQL command but it is syntax for control file. You need to create file with this syntax on server and then use command: IMPORT FROM '/<path>/<filename>.ctl'
    In a shortcut:
    1.- create comma separated CSV file with your data - <source cvs>.csv
    2.- upload CVS file to HANA server
    3.- create the control file <filename>.ctl:
    import data
    into table <schema>."<table name>"
    from '<source cvs>.csv'
    record delimited by '
    fields delimited by ','
    optionally enclosed by '"'
    error log '<file name>.err'
    4.- execute command:
    IMPORT FROM '/<path>/<filename>.ctl'
    Please check following threads:
    How to load CSV files into HANA
    Will HANA supports Bulkload
    Tomas

  • "Could not find the application that created this file" error when trying to combine files

    I am working with a user that is trying to combine a pdf & word doc (docx).  When they try to combine the files she gets the error:  "Could not find the application that created this file" & "Please select a file created by an application that resides on your computer".  The computer is running windows XP, with office 2010 SP1, & Adobe Acrobat Pro X.
    Per previous suggestions, I have already checked to see if Adobe PDFMaker is enabled as a Word plugin, and it is.
    Recentley the user was running Acrobat 6, and this error did not occur.  It is only after upgrading to Acrobat X that this is happening.  Any help with this issue would be appreciated.

    This can also be caused if the files are in a folder deep in the file system. For example C:/xxxxxxxxxxxxxxx/yyyyyyyyyyyyyyy/zzzzzzz/aaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbb /cccccccccccccccccccc/dddddddddddddddd/eeeeeeeeeeeeeeeeeeee/ffffffff/ggggggg/hhhhhhhhhhhhh hhhhhhhhhh/myPDF.pdf
    At some point Adobe PDFMaker cannot handle the path length (also, Windows can't handle the path length either eventually)
    Solution: move the files to a shorther path (perhaps the desktop) and try from there.
    I am filing a bug report with Adobe. A descriptive exception message should be thrown instead of "could not file the app.."

  • Error creating backup file

    Hi,
    I'm running adobe digital editions on a Mac OS X 10.6.3 and I keep getting this error message whenever I open adobe digital editions.
    Error creating backup file: /Users/yongrufui/Documents/Digital Editions/backup_manifest.xml
    Error detail: Error #2038
    This message also appears when I go to Library view. And I can't load my new ebook either.
    Please help!

    I wish I had an answer, but I have the same problem.  My error is: Error Creating Backup File  c:windows\personal\MyDigital Editions\Backup_Manifest.xml
    Error Detail: Error #2038
    I've reported this to Adobe and someone is trying to resolve, but its been over 4 days now.  All of the suggestions provided so far haven't fix it.
    I get this error upon Launching ADE.  Always comes up on Launch, but I can move on by clicking OK.  However, all that does is remove the error message. Still cannot download books from library.

  • SQL Error : missing expression - Creating XML file with ODI

    Hi,
    I saw threads about errors like this and read that maybe it can come from how I chose the staging area. I still can't see where the problem is. I'm trying to create an xml file from data stored in a Oracle database. The interface which execution fails select data from tables and create a tag in the XML file. Here are information about it :
    The staging area is diferent from the target and is an oracle database schema. (I guess it creates temporary tables in that schema ?)
    In the flow tab, the LKM is LKM SQL to SQL, the option delete temporary objects is set to yes.
    The IKM choice for the target is IKM SQL Control Append and options are as following :
    - insert : yes
    - commit : yes
    - flow contreol : no
    - recycle errors : no
    - static control : no
    - truncate : no
    - delete all : no
    - create target table : yes
    - delete temporary objects : yes
    Columns mapping in the target are the following :
    WKID        >     THEADER.WKID
    EXTID        >     THEADER.EXTID
    ORDER     >     THEADER.ORDER
    INSTFK     >     THEADER.INSTFK
    For every column in the target :
    - Run on source
    - Updating : insert, update and ud4 are checked
    no update key is defined
    In the operator, the step failing when running the interface is the loading data in the work table.
    If you need the SQL request in the execution plan, or anything else, please tell me.
    Thank you in advance for any help on this.
    Marie

    It would help if you provide error message and its stack trace.
    Please also look at the documentation (If not already done so) for creating xml file XML Files - 11g Release 1 (11.1.1)

Maybe you are looking for