Error in creating exchange mailbox via Exchange Connector 91000 (or 91010)

Hi,
i have been trying to create a mailbox on an Exchange 2000 server via MSFT_Exchange 91000 and 91010.
i have imported the connector(s) successfully.
i have set path to the script comes with the connector.
. my AD connector can create users in AD
. but when i tried to create a mailbox, it is rejected at "Create Mailbox" step.
error message iincludes ""com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.cleanHierarchyString(Ljava/lang/"" and say "an unknown responce returned"
AD and Exchange have been installed on different servers
honestly, i am stuck and need a fool-proof guide to make the connector work.
any help/idea are very much welcome and appreciated.
kind regards
hakan

hi,
i reinstalled to connector (91010) from the scratch and re-ran the scheduled task to populate mailbax store lookup. then it worked. :-)
hakan

Similar Messages

Creating multiple mailboxes on Exchange 2007 fails

Hi All,
We have a problem to create multiple mailboxes simultaneously on Exchange 2007 using the OIM Exchange connector. Only one of the mailboxes is created when multiple powershell scripts are launched at the same time. This problem only occurs in the production environment and not on the Exchange 2007 test server. Therefore it's likely to be an Exchange 2007 server setting causing the other powershell processes and mailboxes to fail. Has anyone else experienced this problem?
Thanks,
Albin

hi.
have you managed to solve this issue? we have a similar problem when updating some exchange mailbox variables through powershell cmds via OIM. if we run several cmds simultaneously, or right after each other, only the first one is run. tried googling it, but no luck so far.
thanks,
tinba

OIM 9.1.0.18 - Unable to create User MailBox in Exchange 2007

Hi,
I am using OIM 9.1.0.18 configured AD resource with SSL (636).
AD SSL is done. I was able to provision user & change passwords too.
Remote Manager is configured & running fine.
Exchange Connector version *9.1.1.4*
Followed ActiveDirectoryExcServ_guide.pdf doc
Exchange 2007 was installed on another system. All my systems are Windows 2003 R2 SP2
Exchange 2007 has been configured with Remote Manager
User got created on Exchange Server with Recipient Type as Mail User.
The Recipient Type should be UserMailBox.
Pls share some thoughts.
Regards,
Praveen

I created a new user. In User Detail >> Resource Profile --> Exchange the status is Provisioned.
User is created in Exchange but still the RecipientType in Exchange is MailUser.
The Recipient Type should be UserMailBox.
Exchange Mailbox Details
AD Server     ----     ADITResource
Object GUID     ----     b6304538ae3bb847a9c1fe0f334f94e7
Log On Name     ----     [email protected]
Mail Store Name     ----     ADITResource~CN=Mailbox Database,CN=First Storage Group,CN=InformationStore,CN=PWEXCHANGE,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=pwad,DC=com
Email Alias     ----     paul
Display Name     ----     paul smith
Weblogic logs.
Running CHECKPROCESSORDEREDFORUSER
Target Class = com.thortech.xl.util.adapters.tcUtilXellerateOperations
Running GETVALUE
Target Class = com.thortech.xl.integration.Exchange.tcExchangeTasks
Running GETSTRINGLENGTH
Target Class = com.thortech.xl.util.adapters.tcUtilStringOperations
Running Create mailbox
CN=PWEXCHANGE,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative G
roups,CN=First Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=pwad,DC=com--
Running SETUSERPROPERTIES
Target Class = com.thortech.xl.integration.Exchange.tcExchangeTasks
Can anyone help me out with this.
Regards,
Praveen

Error 500 After Moving Mailbox To Exchange 2010

We moved a mailbox from Exchange 2003 to Exchange 2010 through the Local Move process in EMC. That user can still access their mailbox through Outlook, but no longer through OWA.
An error page appears for after logging into OWA:
Error Code: 500 Internal Server Error. The number of HTTP requests per minute exceeded the configured limit. Contact the server administrator. (12219)
Other users (moved previously) can access their mailboxes on the same Exchange 2010 server through OWA.
We are using ForeFront TMG 2010 and Exchange 2010 with Basic Authentication.

Hi,
Glad to know that you have sloved this issue.
Thanks for your generous sharing.
Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support

Error when creating Room Mailboxes

I receive the following error below when I create resource mailboxes. Does anyone know why?
Note: This is a hardened environment to STIG and NIST GCB.
A) Rooms seem to function properly after I create them. I can schedule meetings, etc. But I receive this error every time I create one.
This mailbox was created successfully, but some properties weren't saved. Close this message, then in the Mailboxes list, double-click this mailbox, set the properties, and click Save.
Modified the error to remove organization-specific config. It shows the proper org info for CN and O in my message.
Additional Note
So it seems when I went into ADSI Edit, the System Attendant "homemdb" field was blank.
During initial configuration of the Mailbox servers, I had created a new Database (and replicated it), migrated the Arbitration mailboxes to the new database.
However, it seems that this field was never updated or changed. I tried modifying the homemdb field to the proper MailDB DN. I performed this for both mailbox servers' System Attendants in AD and am waiting for replication to see if this fixes it. I may
have to restart my mailbox server. Restarting the Information Store or Mailbox Assistants services did not change anything.
Cannot open mailbox /o=Contoso/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=MBX001/cn=Microsoft System Attendant.

Hi Mike,
I found a similar thread for your reference:
http://community.office365.com/en-us/f/158/t/18424.aspx
Workaround:
Click Close and are still able to change the properties of the room mailbox. After clicking Save and waiting for a few minutes, the error message disappears.
Best regards,
Niko Cheng
TechNet Community Support

Error when creating Logical Port via WSDL on SOAMANAGER

Hi,
When creating Logical Port via WSDL on SOAMANAGER we're getting the following error:
"Uninstantiated object u201Csubject sidl serviceu201D in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL".
We're consuming a WS provided by a .NET application.
Our system is ECC 6.0 NW 7.01SP 7.
Anyone have faced this error before?.

hI,
Please go through this link , you will get the solution
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/20eb3174-41ab-2a10-a383-907faf60eed3

Error when creating a transport via a correction in charm

Hi Folks..
I am getting an error when I attempt to create a transport using a correction from a change document which is created from a service desk message. I am able to go through the entire process upto creating the transport in the satellite system. When I try I get the following error:
Action Create Transport Request in system DBW 111 of type Source Systems has been cancelled
There is nothing in the action log or either system log. Has anyone seen this before? I can't find anything in Notes, google or here in SDN.
Thanks for your help!
Best Regards,
Bill

Hi
check log of this action in the task list (goto task list -> search error in calendar -> double klick for details)
Maybe:
-You don't have a user in the development system
-You have created a task for a non existing user
-RFC user of TMW RFC has not enough authorization in the dev system to create transports (trace authorizations while creating transport)
best regards
Andy

Child domain not available when creating new mailbox in Exchange 2010

I’ve
installed Exchange 2010 in my environment with a single existing Exchange 2003
server. All current mailboxes are on the child domain. We have 1 root domain
(rootdomain.com) and 1 child domain (child.rootdomain.com). Currently,
we're in the coexistence phase and mailflow is working as expected. Today,
I created a new mailbox using EMC on Exchange 2010 and noticed that the
child domain is not available. Only the root domain is available?
Hopefully, I do not need to reinstall Exchange 2010. How do I go about adding
the child domain?

Did you domain prep the child domain?
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
From a Command Prompt window, run one of the following commands:
Run setup /PrepareDomain or setup /pd to prepare the local domain. You don't need to run this in the domain where you ran Step 3. Running
setup /PrepareAD prepares the local domain.
Run setup /PrepareDomain:<FQDN of domain you want to prepare> to prepare a specific domain.
Run setup /PrepareAllDomains or setup /pad to prepare all domains in your organization.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Suddenly not possible to synchronize Exchange mailbox via IMAP

Hello folks,
I have been using TB as my working email as IMAP client with our corporate MS Exchange server for last several years. All changed this morning where me and my colleagues (running newly updated TB 24.5 or older 24.4) suddenly are not able to sync emails - Server Security Settings was set to SSL/TLS (port 993)
When trying to read new emails I am getting error:
SSL received a record that exceeded the maximum permissible length.
(Error code: ssl_error_rx_record_too_long)
We suspect something has changed on server side (as it stopped to work on older TB releases)
(options https://support.mozilla.org/en-US/questions/976504 does not work for me)
Is there anything we can do to overcome this problem on Thunderbird ?
Thank you very much
Regards
Rudo

At last this was Server certification issue ... Not TB problem
Thanks anyway
Regards
Rudo

Error when Creating new Mailbox - PowerShell - Storage Error

Hi Guys,
I have been working on a new exchange install and when I try to create a new mailbox or new mailboxdatabase I keep getting the following error.
WARNING: The cmdlet extension agent with the index 0 has thrown an exception in OnComplete(). The exception is:
System.TypeInitializationException: The type initializer for
'Microsoft.Exchange.Data.Storage.NativeStorePropertyDefinitionDictionary' threw an exception. --->
System.NotSupportedException: Not supported field(MailEnabled)
type(Microsoft.Exchange.Data.Storage.PropertyTagPropertyDefinition).
   at
Microsoft.Exchange.Data.Storage.NativeStorePropertyDefinitionDictionary.PropertyDefinitionSets.BuildWellKnownSets()
   at Microsoft.Exchange.Data.Storage.NativeStorePropertyDefinitionDictionary..cctor()
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Data.Storage.PropertyTagPropertyDefinition.TryFindEquivalentDefinition(PropTagKey key, Boolean
isCustom, PropType type, TypeCheckingFlag typeCheckingFlag, PropertyTagPropertyDefinition& definition, Boolean&
createNewDefinition)
   at Microsoft.Exchange.Data.Storage.PropertyTagPropertyDefinition.InternalCreate(String displayName, PropTag
propertyTag, PropertyFlags flags, TypeCheckingFlag typeCheckingFlag, Boolean isCustom, PropertyDefinitionConstraint[]
constraints)
   at Microsoft.Exchange.Data.Storage.PropertyTagCache.InternalPropertyDefinitionsFromPropTags(TypeCheckingFlag
propertyTypeCheckingFlag, MapiProp mapiProp, StoreSession storeSession, PropTag[] propTags, Int32&
resolvedPropertyCount)
   at Microsoft.Exchange.Data.Storage.RecipientTable.GetRecipientPropertyDefinitionsFromMapiTable(Boolean&
originalColumnsChanged)
   at Microsoft.Exchange.Data.Storage.RecipientTable.BuildRecipientCollection(Action`2 recipientCollectionBuilder)
   at Microsoft.Exchange.Data.Storage.CoreRecipientCollection..ctor(ICoreItem coreItem)
   at Microsoft.Exchange.Data.Storage.CoreItem.Microsoft.Exchange.Data.Storage.ICoreItem.GetRecipientCollection(Boolean
forceOpen)
   at Microsoft.Exchange.Data.Storage.CoreItem.GetRecipientCharsetDetectionData(StringBuilder stringBuilder, Boolean
isComplete)
   at Microsoft.Exchange.Data.Storage.ItemCharsetDetector.BuildCodePageDetector(MemoryStream& cachedHtmlBody)
   at Microsoft.Exchange.Data.Storage.ItemCharsetDetector.DetectCpidWithOptions(Charset userCharset, MemoryStream&
cachedHtmlBody)
   at Microsoft.Exchange.Data.Storage.ItemCharsetDetector.SetCachedBodyDataAndDetectCharset(Char[] cachedBodyData,
Charset userCharset, BodyCharsetFlags charsetFlags)
   at Microsoft.Exchange.Data.Storage.BodyCharsetDetectionStream.CalculateCharset()
   at Microsoft.Exchange.Data.Storage.BodyCharsetDetectionStream.OnBufferFull()
   at Microsoft.Exchange.Data.Storage.BodyCharsetDetectionStream.CloseDetectorConversionStream()
   at Microsoft.Exchange.Data.Storage.BodyCharsetDetectionStream.Flush()
   at Microsoft.Exchange.Data.TextConverters.ConverterEncodingOutput.Flush()
   at Microsoft.Exchange.Data.TextConverters.Internal.Text.TextCodePageConverter.Run()
   at Microsoft.Exchange.Data.TextConverters.Internal.Text.TextCodePageConverter.Flush()
   at Microsoft.Exchange.Data.TextConverters.ConverterWriter.Flush()
   at Microsoft.Exchange.Data.TextConverters.ConverterWriter.Dispose(Boolean disposing)
   at System.IO.TextWriter.Close()
   at Microsoft.Exchange.Data.Storage.BodyTextWriter.<CloseWriter>b__11()
   at Microsoft.Exchange.Data.Storage.ConvertUtils.CallCts(Trace tracer, String methodName, LocalizedString
exceptionString, CtsCall ctsCall)
   at Microsoft.Exchange.Data.Storage.BodyTextWriter.CloseWriter()
   at Microsoft.Exchange.Data.Storage.BodyTextWriter.Dispose(Boolean disposing)
   at System.IO.TextWriter.Dispose()
   at Microsoft.Exchange.ProvisioningAgent.MailboxLoggerFactory.XsoMailer.Log(AdminLogMessageData data,
LogMessageDelegate logMessage)
   at Microsoft.Exchange.ProvisioningAgent.AdminLogProvisioningHandler.OnComplete(Boolean succeeded, Exception e)
   at Microsoft.Exchange.Provisioning.ProvisioningLayer.OnComplete(Task task, Boolean succeeded, Exception exception)
Does anyone have any idea what is causing this, the server is running Microsoft Exchange 2010 SP2. I don't want to complete an upgrade to SP3 until I have got this issue resolved first.
Any suggestion are welcome.
Kind Regards
TPark IT Technician

In terms of what's causing it, the clue is in the stack above.
its one of the cmdlet extension agents. Which one? Well the one at index 0
Run this, and you should find its the Mailbox Creation Time Agent
Get-CmdletExtensionAgent | select Name, priority
Get-CmdletExtensionAgent | select Name, priority
I'd then run Test-Servicehealth to check services are all responding.
Can you post the exact command you are running to get this?
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Error while creating new user via new MDM API

Hi
I have two questions:
1) Is it possible to create a user in MDM via MDM4J?
2) I am trying to create a user through new MDM API (not the MDM4J). When I execute the command CreateUserCommand, I get following error:
com.sap.mdm.commands.CommandException: com.sap.mdm.internal.protocol.manual.ServerException: MDM repository data is out-of-date or is locked by another MDM Server. Refresh the data and try the operation again. If the error persists, contact the system administrator.
     at com.sap.mdm.security.commands.CreateUserCommand.execute(CreateUserCommand.java:93)
     at demo.dm.GetRoleList.main(GetRoleList.java:206)
Here is the code that I execute:
          CreateUserCommand createusercommand =
               new CreateUserCommand(connections);
          createusercommand.setSession(repsessionId);
          UserProperties userpp = new UserProperties();
          userpp.setName("Vijendra");
          //userpp.setRoleIds(roleids);
          createusercommand.setUser(userpp);
          //createusercommand.setInChangeStamp(-1);
          //System.out.println(createusercommand.getOutChangeStamp());
          try {
               createusercommand.execute();
          } catch (CommandException e) {
               e.printStackTrace();
               return;
Thanks
Vijendra
Edited by: Vijendra Bhanot on Feb 22, 2008 6:42 PM
Edited by: Vijendra Bhanot on Feb 22, 2008 6:49 PM

Hi
I am also getting same exception.
com.sap.mdm.internal.protocol.manual.ServerException: MDM repository data is out-of-date or is locked by another MDM Server. Refresh the data and try the operation again. If the error persists, contact the system administrator.
Please help me.
Thanks & Regards
Vinit

Error while creating change request via solman support desk message

I have configured CHARM and my change req. is working for urgent correction, I have tested the entire workflow.
however when i try to create a new change req. via support desk message --> create a change request open
I get following error
An action was terminated due to an exceptional situation.
Message no. SOCM_ACTION_LOG 090
Diagnosis
An exception has been triggered in PPF action processing.
System Response
Action processing has been terminated. The status of the transaction is still incorrect.
Procedure
You cannot execute the action until the cause of the error has been removed.
The error messages will be kept until the transaction is next checked for subsequent analysis.
Procedure for System Administration
If necessary, analyze other messages in the application log for the incorrect transaction. To analyze the termination, you can activate the breakpoints in the checkpoint group socm_exception.
Additional Information:
Exception CX_SOCM_PRECONDITION_VIOLATED occurred (program:
CL_HF_HELPER==================CP, include:
CL_HF_HELPER==================CM00A, line: 29).
pls help

Hi Yunus,
Your probably have changed the transaction type SLFN to a the customer namespace Z or Y. If this is the case you MUST also "Define Mapping Rules for Copy Control".
Goto SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Change Management -> Change Request Management -> Extended Configuration -> Change Transaction -> Change Transaction Types -> Copy Control for Change Request Management -> Define Mapping Rules for Copy Control.
Once at this point in the IMG make a copy of SLFN -> ZLFN. This will resolve your problem.
Kind regards,
Latief

Create new mailbox via Groupwise web service (SOAP)

Good evening!
I'm new to Groupwise integration via SOAP and was looking through the web service API at this page.
Unfortunately, I was not able to find a method that would allow me to create a new mailbox. Do you have any info if this is even doable via the Groupwise web services? If so, what method should I be using?
Kind regards
Hubbovich

That is only possible programmatically through
the Admin API.
Preston
>>> On Sunday, May 29, 2011 at 12:36 PM,
Hubbovich<[email protected]> wrote:
> Good evening!
>
>
> I'm new to Groupwise integration via SOAP and was looking through the
> web service API at 'this page'
>
(http://developer.novell.com/document...ex.html?page=/
> documentation/gwsoap/gwwbserv/data/b8cg4px.html).
>
> Unfortunately, I was not able to find a method that would allow me to
> create a new mailbox. Do you have any info if this is even doable via
> the Groupwise web services? If so, what method should I be using?
>
> Kind regards
>
> Hubbovich

Error While Creating Business Agreement via IC Web CLient

Dear Experts,
I am working on IC Web Client ( CRM 7.0) & ISU (ECC 6).
I was able to create the Business Agreement & successfully replicate the same
to ISU as a Contract Account.
But when I Try to create the Business Agreement from ICWebClient I am
getting following Error.
"No Business Agreement Class for Channel ICW, Usage 01 and Risk Class"
I have done the settings for ,Allocate Business Agreement Class as ;
Channel :- ICW ,
Usage :-Std Payment Data,
Risk CLass :- B,
Business Agreement CLass:- 01
But still I am Getting this error.
Can any one please help me in this

Problem solved mainatain Risk Class as " "

Error while creating Generic Extractor via Function Module

Hello Guys
I have created a Generic Extractor through a Function Module. I took the Standard FM: RSAX_BIW_GET_DATA_SIMPLE, gave it a new name and activated it. I made a few changes in it, like giving my structure name for E_T_DATA and giving the list of tables, from where I need to get the data. Then I created the datasource in RSO2 by giving this function module and the extract structure.
The DS was created properly, but when I check in RSA3 for records, its giving me an error: ---> <b>The extraction program does not support object YCNA_INVY_TRNS</b>
What do i do now? Can someone please tell me, what changes I need to make in the standard FM to suit my requirements??
Thanks.

Hi,
Just try to reactivate the structure once again. And when you open the function module, if the problem still persists just try to press Return key several times. The message you are getting is just a warning message.
PS: I am not sure whether this is the correct way, but i personally resolved this by pressing the ENTER key 4 or 5 times. So just give a try.
Regards
Sunil

Error in creating exchange mailbox via Exchange Connector 91000 (or 91010)

Similar Messages

Maybe you are looking for