Error in creating InfoPackage "Assign a language field to IOBJ 0LANGU"

Hi Guys,
Im having a problem in B.I using tcode rsa1old .Upon creation of InfoPackage for IX_MAT_TEXT which is material name an error occur.
"Assign a language field to IOBJ 0LANGU; danger of short dump" . But when I create a IX_MAT_ATTR, no problem encountered.
How can I solve this? all are activated...
Please help . Will reward points.
Thanks in advance
aVaDuDz

Hi,
Please find the steps below:
1. Open the transfer rule and if it is language dependent then map it with appropriate field by selecting the language field and the field to be mapped and using arrow to map.
2. If it is not language dependent and you want to add EN as constant as mentione by Shashank above then, click on the "X" sign next to the field and once a pop up comes select the option "Constant" and there you add the value EN. save and re-activate the Info Source. It will work.
Please close the question.

Similar Messages

Error while creating INFOPACKAGE to load transaction data

Hi,
I am getting the following error while creating infopackage:
"Error in Conversion exit CONVERSION_EXIT_CUNIT_INPUT"
I am getting this error when I click on the Start button under the schedule tab in the screen Administrator Workbench: Modelling.
I clicked on Monitor icon to view the diagnosis. The diagnosis is mentioned below:
the screen is Performance Assistant Window and the diagnosis message appears in italics.
<i>Message No RSAR137
DIAGNOSIS
An error occurred in record 1 during execution of conversion exit CONVERSION_EXIT_CUNIT_INPUT for field UNIT.
Procedure
Check that the record where error occurred has the correct format and correct it accordingly. </i>
Please note that I have succesfully created update rules as I didn't get any error.
Also I would like some one to explain me clearly the differences between transfer rules and update rules with a clear explanation please.
Please help me.
Thank you.
Tristan.

Hello Tristan,
I was used to get the same kind of problems before.
I got the problem with the data source type-Flat File (.csv)
One solution that I have done:
1) checked the particular record in which the error message refer to
2) tested the particular unit from the transaction se37
   Function Module = CONVERSION_EXIT_CUNIT_INPUT
   Press F8 in order to execute
   This would be help a bit
3) corrected data from the flat file
   another alternative solution was by:
   handling the data using routine in the transfer rules
For my case, before executing the InfoPackage, data from flat file could be previewed. At this point, I could check which records caused the problems.
I'm not sure about your case whether data came from which type of data source.
That's all I could share for now.
-WJ-

Getting error while creating an assignment through API

Hi Experts,
When i'm trying to create a assignment using the following code, Im getting the following error
ORA-20001: You must enter GRE details for the assignment
Where we can pass the GRE information or how we can come out of this error.
Pls clarify this
hr_assignment_api.update_emp_asg_criteria
p_validate => false
,p_effective_date => l_hire_date --to_date('01-Jan-2012','DD-MON-YYYY')
,p_datetrack_update_mode => 'CORRECTION'
,p_assignment_id => l_assignment_id
,p_object_version_number => l_object_version_number
,p_organization_id => l_organization_id
,p_location_id => l_location_id
,p_grade_id => l_grade_id
,p_job_id => l_job_id
--,p_position_id => 362
,p_payroll_id => l_payroll_id
,p_pay_basis_id => l_basis_id
,p_special_ceiling_step_id => l_special_ceiling_step_id
,p_people_group_id => l_people_group_id
,p_group_name => l_group_name
,p_org_now_no_manager_warning => l_org_now_no_manager_warning
,p_effective_start_date => l_effective_start_date
,p_effective_end_date => l_effective_end_date
,p_other_manager_warning => l_other_manager_warning
,p_spp_delete_warning => l_spp_delete_warning
,p_entries_changed_warning => l_entries_changed_warning
,p_tax_district_changed_warning => l_tax_district_changed_warning
,p_soft_coding_keyflex_id => l_soft_coding_keyflex_id
,p_concatenated_segments => l_concatenated_segments
,p_gsp_post_process_warning => l_gsp_post_process_warning
Thanks,
Anil

What is your application release?
Please see if these docs help.
Error Saving an Assignment: APP-Pay-50001: You Must Enter Gre Details For The Assignment [ID 277958.1]
'GRE & Other Data' Statutory Tab Not Available; Errors APP-FND-00668; APP-PAY-50001 [ID 312787.1]
12567830: PERWSHRG Staturtory Information Flexfield is not Recognizing Default Values [ID 1329310.1]
Manager Self-Service - Hire - GRE Is Not Defaulting if Field is not Displayed [ID 1458563.1]
Statutory Information Flexfield isn't Recognizing Default Values with Required Segments [ID 1344618.1]
Thanks,
Hussein

Error while creating infopackage

Hi,
i am using BI 710. I am trying to create infopackage for 0COMP_CODE master data object and i am getting following error messeges:
Data target 'ZCOMP_COD ' removed from list of loadable targets; not loadable     RSM     33
Data target 'ZCOMP_COD ' is not active or is incorrect; no loading allowed     RSM     36
Data target 'ZCOMP_COD$T ' removed from list of loadable targets; not loadable     RSM     33
Data target 'ZCOMP_COD$T ' is not active or is incorrect; no loading allowed     RSM
     36
please help with this.
Thanks & Regards,
Vijaya

Hi Vijaya,
the trigger for the popup will be described in the attached note 925304.
side effect of the note is, that the pop-up will be shown for deleted
infoprovider also, which have active updaterules in the system.
Please check table 'RSUPDINFO' for the relevant InfoProvider, if there
any active UpdateRules. With function module (SE37) 'RSAU_UPDR_DELETE'
it is possible to delete them. After that, the popup wouldn´t be
called.
There is also a chance to disable the popup when you access the
infopackage. Please see the note for that alternative.
Eventhough you are getting the above message it will not stop you to schedule the Infopackage. I had this problem 6 months back, I used to get the messages then I deleted them with the Function module.
I hope this will help you.
All the best.
Vijay.

Error in creating PO using Japanese language in ECC 6.0

Hi guys,
We are encountering an error (BP762) in creating PO when using Japanese log on language...
Why is that? Thanks!

Hi Mark
Sorry for missing the link Here is the information in the link.
Windows->Settings>Control Panel>Regional and Language Option>Language Tick both the checkboxes over there.
SAP->Customizing of local layout[nothing but last button of the toolbar at sap screen->Option--->I18N (Activate Multibyte Function Support)
And then try to logon in SAP and use your transaction.
Thanks
Sudharshan

Error while creating a hyperlink for a field in a table view

Hi all,
I have created a table view to display the lead information.Now i wanted to make the lead number to be made as a hyperlink.I have tried the delow code
<htmlb:tableView id = "tvX"
headerText = "Leads Details"
headerVisible = "true"
design = "alternating"
visibleRowCount = "5"
visibleFirstRow = "<%= firstvisiblerow %>"
fillUpEmptyRows = "true"
onHeaderClick = "MyEventHeaderClick"
onRowSelection = "select"
selectionMode = "singleselect"
table = "<%= activities %>"
iterator = "<%= z_it %>"
sort = "SERVER" >
<htmlb:tableViewColumns>
<htmlb:tableViewColumn
columnName = "object_id"
type = "link" >
</htmlb:tableViewColumn>
</htmlb:tableViewColumns>
</htmlb:tableView>
But am getting the following error whlle am activating the code
Internal error occured during runtime generation
of Class CL_O2D59X6KFES8AMMPAFQ6AV1R3WF (Dump ID:
DBIF_REPO_SQL_ERROR).
When i remove the code for <htmlb:tableViewColumns> this error does not exist
Can canyone help me in solving this?
Thanks

Hi,
in iterator method IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START.
you need to call method cl_hrrcf_iterator=>get_bee_link to define the link for a specific filed.
for example check the below code.
IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START.
CASE p_column_key.
    WHEN 'PERNR'.
    CALL METHOD cl_hrrcf_iterator=>get_bee_link
        EXPORTING
          p_cell_id       = p_cell_id
          p_onclientclick =link_url
          p_column_key    = p_column_key
          p_row_data_ref  = p_row_data_ref
          p_tooltip_alias = l_alias
        IMPORTING
          po_bee          = p_replacement_bee.
    ENDCASE.
endmethod.
vijay

Error while trying to create new assignment with supervisor through API

Hi Experts,
I'am trying to create new assignment with supervisor for employee, but i'am facing this error:
=============================================================
ORA-20008: Error While Create new assignment..-20001
ORA-20001: The supervisor assignment that you have entered is invalid.
Please check that you have entered the supervisor,
that the supervisor assignment belongs to this supervisor and that the assignment is effective.
ORA-06512: at line 198
=============================================================
This is my script, (Oracle EBS 12.1.1)(DB 11):
DECLARE
v_user_id NUMBER;
v_res_id NUMBER;
v_res_appl_id NUMBER;
v_org_now_no_manager_warning BOOLEAN;
v_spp_delete_warning BOOLEAN;
v_other_manager_warning BOOLEAN;
v_tax_district_changed_warning BOOLEAN;
v_entries_changed_warning VARCHAR(4000);
v_person_id per_all_assignments_f.person_id %TYPE;
v_business_group_id hr_all_organization_units_tl.organization_id %TYPE;
v_people_group_id per_all_assignments_f.people_group_id %TYPE;
v_object_version_number per_all_assignments_f.object_version_number %TYPE;
v_special_ceiling_step_id per_all_assignments_f.special_ceiling_step_id %TYPE;
v_group_name pay_people_groups.group_name %TYPE;
v_ass_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
v_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
v_effective_end_date per_all_assignments_f.effective_end_date %TYPE;
v_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_sup_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_supervisor_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_job_id per_jobs.job_id %TYPE;
v_grade_id per_grades.grade_id %TYPE;
v_location_id hr_locations_all.location_id %TYPE;
v_payroll_id pay_all_payrolls_f.payroll_id %TYPE;
v_pay_basis_id per_pay_bases.pay_basis_id %TYPE;
BEGIN
v_user_id := FND_GLOBAL.user_id ;
v_res_id := FND_GLOBAL.resp_id ;
v_res_appl_id:= FND_GLOBAL.resp_appl_id;
FND_GLOBAL.apps_initialize(v_user_id, v_res_id, v_res_appl_id);
BEGIN
SELECT organization_id
INTO v_business_group_id
FROM hr_all_organization_units_tl
WHERE name = 'Vision University'
AND language = 'US';
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20000,'Error While Retrieving (Business Group ID) Info...'||SQLCODE||' '||SQLERRM);
END;
FOR R IN (SELECT * FROM xx_assignment) LOOP
BEGIN
SELECT assignment_id , ass_f.object_version_number
INTO v_assignment_id , v_object_version_number
FROM per_all_assignments_f ass_f, per_all_people_f p_f
WHERE ass_f.person_id = p_f.person_id
AND ass_f.business_group_id = p_f.business_group_id
AND ass_f.business_group_id = v_business_group_id
AND p_f.employee_number = R.employee_number
AND TRUNC(p_f.effective_start_date)= TRUNC(ass_f.effective_start_date)
AND TRUNC(p_f.effective_end_date) = TRUNC(ass_f.effective_end_date);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001,'Error While Retrieving (Assignmet_ID) for employee..'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT job_id
INTO v_job_id
FROM per_jobs
WHERE trim(lower(name)) = trim(lower(r.employee_job))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20002,'Error While Retrieving (Job_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT grade_id
INTO v_grade_id
FROM per_grades
WHERE trim(lower(name)) = trim(lower(r.employee_grade))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20003,'Error While Retrieving (Grade_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT location_id
INTO v_location_id
FROM hr_locations_all
WHERE trim(lower(description))= trim(lower(r.employee_location))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20004,'Error While Retrieving (Location_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT payroll_id
INTO v_payroll_id
FROM pay_all_payrolls_f
WHERE trim(lower(payroll_name)) = trim(lower(r.payroll_name))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20005,'Error While Retrieving (Payroll_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT pay_basis_id
INTO v_pay_basis_id
FROM per_pay_bases
WHERE trim(lower(pay_basis)) = trim(lower(r.pay_basis))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20006,'Error While Retrieving (Pay_Basis_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT person_id
INTO v_person_id
FROM per_all_people_f
WHERE employee_number = r.supervisor_number
AND business_group_id= v_business_group_id;
SELECT assignment_id
INTO v_sup_assignment_id
FROM per_all_assignments_f
WHERE person_id = v_person_id
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20007,'Error While Retrieving (Assignmet_ID) for supervisor..'||SQLCODE||' '||SQLERRM);
end;
BEGIN
hr_assignment_api.update_emp_asg_criteria(p_effective_date => TRUNC(SYSDATE),
p_datetrack_update_mode => 'CORRECTION',
p_assignment_id => v_assignment_id,
p_validate => FALSE,
p_called_from_mass_update => NULL,
p_grade_id => v_grade_id,
p_position_id => NULL,
p_job_id => v_job_id,
p_payroll_id => null,--v_payroll_id,
p_location_id => v_location_id,
p_organization_id => v_business_group_id,
p_pay_basis_id => v_pay_basis_id,
p_segment1 => NULL,
p_segment2 => NULL,
p_segment3 => NULL,
p_segment4 => NULL,
p_segment5 => NULL,
p_segment6 => NULL,
p_segment7 => NULL,
p_segment8 => NULL,
p_segment9 => NULL,
p_segment10 => NULL,
p_segment11 => NULL,
p_segment12 => NULL,
p_segment13 => NULL,
p_segment14 => NULL,
p_segment15 => NULL,
p_segment16 => NULL,
p_segment17 => NULL,
p_segment18 => NULL,
p_segment19 => NULL,
p_segment20 => NULL,
p_segment21 => NULL,
p_segment22 => NULL,
p_segment23 => NULL,
p_segment24 => NULL,
p_segment25 => NULL,
p_segment26 => NULL,
p_segment27 => NULL,
p_segment28 => NULL,
p_segment29 => NULL,
p_segment30 => NULL,
p_employment_category => NULL,
p_concat_segments => NULL,
p_grade_ladder_pgm_id => NULL,
p_supervisor_assignment_id => v_sup_assignment_id,
p_people_group_id => v_people_group_id,
p_object_version_number => v_object_version_number,
p_special_ceiling_step_id => v_special_ceiling_step_id,
p_group_name => v_group_name,
p_effective_start_date => v_ass_effective_start_date,
p_effective_end_date => v_effective_end_date,
p_org_now_no_manager_warning => v_org_now_no_manager_warning ,
p_spp_delete_warning => v_spp_delete_warning,
p_entries_changed_warning => v_entries_changed_warning,
p_tax_district_changed_warning => v_tax_district_changed_warning,
p_other_manager_warning => v_other_manager_warning);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20008,'Error While Create new assignment..'||SQLCODE||' '||SQLERRM);
END;
END LOOP;
COMMIT;
END;
Thank you & Best Regards

I think this is essentially saying that the Supervisor Assignment is wrong or no longer effective. Looking at your SQL to fetch the Supervisor Assignment there are a number of potential issues. This is what you've currently got:
SELECT person_id
INTO v_person_id
FROM per_all_people_f
WHERE employee_number = r.supervisor_number
AND business_group_id= v_business_group_id;
SELECT assignment_id
INTO v_sup_assignment_id
FROM per_all_assignments_f
WHERE person_id = v_person_id
AND business_group_id = v_business_group_id;
Potential Problems/Clarifications
1. What is r.supervisor_number, what does it contain and how is it derived? I can't see that anywhere else in the block...
2. Is there a chance that r.supervisor_number is referencing an employee who has left, ie, now an ex-employee?
3. The SELECT statement that fetches the assignment_id does not perform any date-effective restrictions, which means you might be lucky enough to fetch the person's current assignment. But you might also fetch an old or future-dated assignment.
4. The SELECT statement that fetches the assignment_id does not restrict the type of assignment, so if this manager has applied for a job (ie, they have an applicant assignment) or some other type of non-employee assignment you might be picking that up.
This would work better for you:
SELECT paaf.assignment_id
INTO v_sup_assignment_id
FROM per_all_people_f papf
,per_all_assignments_f paaf
WHERE papf.employee_number = r.supervisor_number
AND papf.business_group_id = v_business_group_id
AND nvl(papf.current_employee_flag, 'N') = 'Y'
AND trunc(sysdate) BETWEEN
papf.effective_start_date AND papf.effective_end_date
AND papf.person_id = paaf.person_id
AND paaf.assignment_type = 'E'
AND paaf.primary_flag = 'Y'
AND trunc(sysdate) BETWEEN
paaf.effective_start_date AND paaf.effective_end_date;
If it doesn't return a row it means that the supervisor (or whatever employee is returned by r.supervisor_number) is not active as at sysdate and cannot be used. Note that this SQL only applies for employees. If you can have Contingent Workers as supervisors in your implementation then this needs tweaking.
Does that help?

Error while creating fields in the Category Structure Urgent

Hii,
I am getting the Error while creating the Category structure fields
Error Message : Entry YF_COU does not exist in CABN - check your entry
Message no. 00058
Diagnosis
Input values must be defined in Table CABN. The value or values 'YF_COU ' are not specified in this table.
Procedure
Check whether the input is correct and correct if necessary.
Procedure for System Administration
If this is not an incorrect entry, check the system settings and change them if necessary.
If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
Please help me in this error
Regards,
Kumar

Hii,
I have assigned the Characteristics group /AFS/SAP_C to the characteristics but still i am getting the error when i assign the Char Field under the Category Structure.
I have manually created the Characteristics Group AFS characteristics for categories. Is this will automatically updated or while installing the Add On.
Please explain of the Configuration related to the Category Structure.
Regards,
Kumar

Language Field Error

HI all,
While creating an Account in CRM 7.0 , we are facing an error" enter a value for field language according to ISO 639 ".
There are many language fields , i filled all but still...same error.
Your help is highly appreciated
Thnx
Chandu.

Hi Chandu,
Can you please suggest how did you reoslve this issue. I am facing same issue while creating Contacts. WEB UI screen is not changed and it's same as deliverd from SAP. When I try to add language "EN" for Contacts I get an error" enter a value for field language according to ISO 639 ".
I havn't tried to change the standard screen config by activating another langaue key for contacts.Do I need to add user parameter for language.
Thanks,
Rahul

SNC : Error while creating Subcon PO with Order (F) account assignment cat

Hi,
I am trying to implement Outsourced Manufacturing scenario with ECC 604 and SNC 7.0
We would like to demonstrate "Real Time Consumption" once a phase has been completed for WO in SNC.
For this, it is necessary create Subcon PO with A/c assignment category F. While trying to create PO, i get the following error:
1. Acct assignment determination is not poss.in the account assgnmnt manager
Message no. IAOM220
Diagnosis
Errors occurred during the determination of the account assignment in the account assignment manager. Thus it is not possible to determine the account assignment.
2. Characteristics for Controlling object have errors
Message no. IAOM034
Diagnosis
There are errors in the characteristics that are transferred when creating or changing a Controlling object.
System Response
Processing stopped.
Procedure
Look at the messages prior to this object in the error log. They give an indication as to which characteristics have errors.
3. Hierarchy level 01 not defined in business scenario Outsourced Manufacturing
Message no. IAOM027
Diagnosis
In business scenario 'Outsourced Manufacturing', hierarchy level 01 was accessed. There is no key characteristic defined for this hierarchy level.
System Response
Processing is terminated.
Procedure
Inform SAP or the provider of the business scenario, if the business scenario was not provided by SAP.
If you are responsible for the business scenario yourself, check the definition of the business scenario.
Settings specific to CO order that have been maintained:
IAOM1 - Maintain Controlling Scenario
IAOM2 - Maintain Controlling Integration
KA02 - Default Cost assgnmnet
Tick RT consumption in ME11 (Vendor Purchasing Info Record).
Any idea???
Regards,
Sandeep

Dear,
Did you also experience the following?
We are at the following step in the scenario:
Supplier confirms production progress =>Manufacturingworkorderproductionprogressnotification XML is generated => POST component consumption is executed in the R/3 system (ECC 6 EHP4).
We see the following problems after posting the component consumption
-     table EKBE_SC is not filled
-     in transaction kkf3 => CO production order => no booking/posting of progress
-     Component consumption is reflected in an outbound delivery with movement type 543, but it is missing the link with the purchase order+item (see screenshot below) => as a result any post issue booking is not possible.
Thanks for your help.
Kindr regards,
Stefan Hemeryck

Error while creating Subcon PO with Order (F) account assignment cat

Hi,
I am trying to implement Outsourced Manufacturing scenario with ECC 604 and SNC 7.0
We would like to demonstrate "Real Time Consumption" once a phase has been completed for WO in SNC.
For this, it is necessary create Subcon PO with A/c assignment category F. While trying to create PO, i get the following error:
1. Acct assignment determination is not poss.in the account assgnmnt manager
Message no. IAOM220
Diagnosis
Errors occurred during the determination of the account assignment in the account assignment manager. Thus it is not possible to determine the account assignment.
2. Characteristics for Controlling object have errors
Message no. IAOM034
Diagnosis
There are errors in the characteristics that are transferred when creating or changing a Controlling object.
System Response
Processing stopped.
Procedure
Look at the messages prior to this object in the error log. They give an indication as to which characteristics have errors.
3. Hierarchy level 01 not defined in business scenario Outsourced Manufacturing
Message no. IAOM027
Diagnosis
In business scenario 'Outsourced Manufacturing', hierarchy level 01 was accessed. There is no key characteristic defined for this hierarchy level.
System Response
Processing is terminated.
Procedure
Inform SAP or the provider of the business scenario, if the business scenario was not provided by SAP.
If you are responsible for the business scenario yourself, check the definition of the business scenario.
Settings specific to CO order that have been maintained:IAOM1 - Maintain Controlling Scenario
IAOM2 - Maintain Controlling Integration
KA02 - Default Cost assgnmnet
Tick RT consumption in ME11 (Vendor Purchasing Info Record).
Any idea???
Regards,
Sandeep

well it seems to be an CO issue
please check if the g/l is maintained as cost element
also check the setting s of account assignment catergory F and let us on which modifier key is maintained there make sure in OBYC-GBB the g/l is maintained for the material valuation class and which should be cost lement

Getting error while creating new fields

hi all,
i am getting an error when i am adding a new field thru eewb to a txn.
error message "Definition CRM_BTX_ADD_NEW_FIELDS is of the type 'TSK' and should run on an external system. This is not permissible. Only definitions of type 'SEQ' may be created for external systems."
plz helep me out
and i have few doubts
1 in web ui to display these new fields do we need to write a program
2. new field values are stored in table do weneed to create any table ?
3. do we need to write any program so that the values will be stored in tht table?
thanks
madhuri
Edited by: madhuri pasupuleti on Apr 27, 2009 1:33 PM

Hi Madhuri,
For error message "Definition CRM_BTX_ADD_NEW_FIELDS is of the type 'TSK' and should run on an external system. This is not permissible. Only definitions of type 'SEQ' may be created for external systems."
- Check SAP Market Place for any notes on "CRM_BTX_ADD_NEW_FIELDS"
1 in web ui to display these new fields do we need to write a program
- No need to write any program to display new fields in WEB UI. Using the EEWB will automatically create code behind the screens. All new fields created will be available in base table (example: for business partner - BUT000). You can explore the fields available functionality in WEB UI to populate them
2. new field values are stored in table do we need to create any table ?
- No, EEWB will automatically creates customized structure in code behind the screens
3. do we need to write any program so that the values will be stored in tht table?
- No, I don't know how to add values to the particular field(s) but sure that you don't need to write any program to store the values in customized tables
Cheers,
Peter J.

Error in creating a view for an assignment block

Hello All,
I am trying to create an assignment block in web UI using links below.
http://weblogs.sdn.sap.com/cs/mobile/view/wlg/21034?x-topic=89 -- to create a table and corresponding BOL entity.
http://wiki.sdn.sap.com/wiki/display/CRM/CRMWebUITechnical-CreatingTableViewInWebUI u2013 to create an assignment block
When I try to create an assignment block in CPG_MAIN, I am unable to find my zorder_so BOL entity. Any pointers would be of great help.
Edited by: chandrakantklk on Jul 21, 2011 10:20 AM

Unfortunately I did not see anything in this note that would help it appeared to be talking about IM and QM.
I do agree there is some inconsistencies and I am just not sure where....None of this makes any sense as I said one day it will work and then the next time you try it, it gives the error message....I am so at a lost at this point...

Error when creating a description field. MySQL syntax to use?

I'm creating a form which has a description field in it. I created this form with many fields. However I then got an error and decided to limit the form to only 2 fields. These 2 fields (user and title) insert with no problem. However when I added the description field into the mix. I gat the same error I had previously gotten.
Error:
Internal error.
Developer Details:
tNG_fields.getFakeRecordset:
SQL error: Error creating temporary table:
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'desc TEXT, job_id TEXT)' at line 1
SQL:
CREATE TEMPORARY TABLE KT_fakeRS_20080204 (client_id TEXT, name TEXT, desc TEXT, job_id TEXT) (FIELDS_FAKE_RS_ERROR)
tNG Execution Trace - VIEW
* tNG_insert.executeTransaction
o STARTER.Trigger_Default_Starter
* tNG_insert.getRecordset
* tNG_insert.getLocalRecordset
* tNG_insert.getFakeRecordset*
I'm using the "Text" syntax for the field "desc" (description)
What am I doing wrong? Do I need to define the table row in a different way?

Hi,
I am working on an image gallery using the tutorials.
I used the sql
SELECT *,
rand() as random_number
FROM image_img
ORDER BY random_number DESC LIMIT 1
on my default.php page but on preview i get the message
You have an error in your SQL syntax near 'LIMIT 0, 10' at line 1
I tried the solution above by removing the desc limit.
I got the same prob.
I will like to know how best to tackle this.
Thanks
Yomi

Error while creating so "Text 0000001025 ID 0012 language EN not found

Dear Sirs,
I am creating sales order but when i enter the material i am getting an error message
"Text 0000001025 ID 0012 language EN not found
Message no. TD600
Diagnosis
You want to read a text which does not exist in the data base (or update memory).
System Response
Reading could not be carried out.
Procedure
You need to create this text:
1. Initialization (module INIT_TEXT)
2. Save (module SAVE_TEXT)"
Can any one please let me know what i am doing wrong?
Thank & regards,
Sameer

Hi,
I hope its an error related to ABAP developements,either smartforms or reports related so you consult your abaper to resolve it.
Here is an sample ABAP code using the READ_TEXT function module without Exceptions uncommented.
This sample ABAP code is taken from a SAP Smartform which is created for SAP invoice output document.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
id = 'ZI01' " Billing Item Text
language = 'I'
name = lv_name " Invoice
object = 'VBBP' " Billing
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
*IMPORTING
HEADER =
tables
lines = lt_lines
*EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thank you

Error in creating InfoPackage "Assign a language field to IOBJ 0LANGU"

Similar Messages

Maybe you are looking for