Error in creating JE using SDK

I am using B1 2004 B and trying to create JE using SDk(vb6).I am getting the following error:
[OJDT.BtfStatus][line: 2] , 'Row in Transaction with Account No.'
Following is my code:
Dim vJE As SAPbobsCOM.JournalEntries
Set vJE = oCmp.GetBusinessObject(oJournalEntries)
vJE.Lines.AccountCode = "500005"
vJE.Lines.ContraAccount = "131000"
vJE.Lines.Credit = 0
vJE.Lines.Debit = dblAmount
Call vJE.Lines.Add
vJE.Lines.AccountCode = "C003"
vJE.Lines.ContraAccount = "400000"
vJE.Lines.Credit = 0
vJE.Lines.Debit = (dblAmount * 105) / 100
vJE.Add()
B1 gurus please help.
Thanks

When you encounter a problem when working with DI API, please remember that you should try to do the same in the SAP Business One application!
In your case the first thing which is wrong is that at least one of the account codes in the second line is wrong (AccountCode or ContraAccount); unfortunately the error message does not really tell you that, but this happens quite often in software development.
Secondly the principle of journal entries is to have a "balanced transaction", i.e. <total of Debit(s)> = <total of Credit(s)>... (this will be the next error you will be running into).
I recommend that you check-out the material in the Developer Area on this site (https://www.sdn.sap.com/sdn/developerareas/businessone.sdn?node=linkDnode10) + check-out the SAP Business One-related material in the Education area in the SMB Portal on SAP Service Marketplace (http://service.sap.com/smb)...
HTH,
Frank

Similar Messages

Error while creating stock using tcode: MB1C

Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not exist

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

Getting error while creating subsite using custom template in sharepoint2013

Hi,
I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
Please suggest me on this.
Thanks in advance.

You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How to create Invoice using SDK?

Hi Friends,
I m creating invoice using SDK functions..
          Company comp           =     new Company();
       comp.Server           =     "CSNSYS026";
       comp.CompanyDB      =     "SBODemo_US";
       comp.UserName      =     "manager";
       comp.Password      =     "manager";
           comp.Connect();
     comp.XmlExportType =     SAPbobsCOM.BoXmlExportTypes.xet_NodesAsProperties;
     SAPbobsCOM.SBObob oSBObob     =     (SBObob)comp.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoBridge);
     Documents inv          =     (Documents)comp.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices);
     inv.ManualNumber     =     "20000";
     inv.DocDate          =     DateTime.Now;
     inv.DocDueDate          =     DateTime.Now;
        inv.CardCode          =     "C40001";
     inv.CardName          =     "EarthshakerCorp.";
     inv.DocCurrency          =     "USD";
     inv.Lines.ItemCode     =     "A00001";
     inv.Lines.Quantity     =     10;
     inv.Lines.Price          =     100;
     inv.DocTotal          =     1000;
     int i                    =     inv.Add();
     MessageBox.Show("Invoice created "+i);
<b>While i execute the above c# code,Invoice din't created,Wht's missing in the above code</b>..
Thanks in Advance
regards
Sooriyakala.P

Ho Sooriya,
what is the returncode from inv.add?
If you call comp.getLastErrorDescription, you get the errordescription
you should also set handwritten to true
Regards
Ad

Logical error in creating tables using db link in solaris

Hi,
While creating table using the syntax create table newtab...as select * from tab@dblink .. I am facing a problem. The newtab table created is having a structure different (from datalength point of view of varchar2 and char datatypes) from the source. The data length is getting tripled i.e. if a column a is varchar2(20) in tab then it is becoming --- a varchar2(60) in newtab. This is happening in solaris environment when the two databases are in 2 different servers. Please let me know if there are any patches to resolve the problem.
Thanks
Arnab

ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link?

Error while creating Salesorder using BAPI

hello frnds,
I m new to abap and tryin to make use of BAPI_SALESORDER_CREATEFROMDAT1 to create Sales Order
I have used the progrtam below.
*& Report ZSALESBAPITRIAL
REPORT zsalesbapitrial.
TABLES : vbak , vbap.
Parameter Screen.
Sales Document Type.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
Sales document type.
PARAMETERS: p_auart TYPE vbak-auart OBLIGATORY.
Sales Organisation.
PARAMETERS: p_vkorg TYPE vbak-vkorg OBLIGATORY.
Distribution channel.
PARAMETERS: p_vtweg TYPE vbak-vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE vbak-spart OBLIGATORY.
SKIP 1.
Sold to.
PARAMETERS: p_sold TYPE vbak-kunnr OBLIGATORY.
Ship to.
PARAMETERS: p_ship TYPE vbak-kunnr OBLIGATORY.
SKIP 1.
Material(Article No).
PARAMETERS: p_matnr TYPE vbap-matnr   OBLIGATORY.
Quantity (Cummulative quantity of sales Order)
PARAMETERS: p_menge type vbap-kwmeng obligatory.
Plant(Site )
parameters: p_plant type vbap-werks obligatory.
SELECTION-SCREEN END OF BLOCK b1.
Data declarations.
DATA: v_vbeln            LIKE vbak-vbeln.
DATA: header             LIKE bapisdhead1.
DATA: headerx            LIKE bapisdhead1x.
DATA: item               LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner            LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return             LIKE bapiret2    OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                         WITH HEADER LINE.
DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapischdl
                         WITH HEADER LINE.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant    = p_plant.
itemx-plant   = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty    = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty     = 'X'.
APPEND lt_schedules_inx.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.
but its giving 'Error in creating document' I m unable to figure wat i m missing . Is it tht i m gving wrong parameters.
Please help !!!

Does tht mean i need to add the following code
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant    = p_plant.
itemx-plant   = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
For second item.
Line item number.
item-itm_number = '000020'.
itemx-itm_number = 'X'.
Material
item-material = '600020001'.
itemx-material = 'X'.
Plant
item-plant    = p_plant.
itemx-plant   = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty    = p_menge.
APPEND lt_schedules_in.
Fill schedule lines
lt_schedules_in-itm_number = '000020'.
lt_schedules_in-sched_line = '0002'.
lt_schedules_in-req_qty    = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty     = 'X'.
APPEND lt_schedules_inx.
Fill schedule line flags
lt_schedules_inx-itm_number = '000020'.
lt_schedules_inx-sched_line = '0002'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty     = 'X'.
APPEND lt_schedules_inx.
But i guess it is overwritting my frst material..
Also i m gettin a error
For object rv_beleg, number range interval doesnot exist
Pls suggest

Error while creating Resource using GDS

Hi
Iam trying to create Resource using GDS and it is throwing me error
clresource: (C189917) VALIDATE on resource egateq00-haegate_reg-res, resource group egateq00-rg, exited with non-zero exit status.
clresource: (C720144) Validation of resource egateq00-haegate_reg-res in resource group egateq00-rg on node uhegateq02 failed.
clresource: (C891200) Failed to create resource "egateq00-haegate_reg-res".
This is the command I executed
rclresource create -g egateq00-rg -t SUNW.gds
-p Scalable=false -p Start_timeout=120 -p Stop_timeout=120 -p Probe_timeout=30
-p Port_list="23001/tcp" -p Start_command="/egateq00/scripts/reg_START.sh" -p Stop_command="/egateq00/scripts/reg_STOP.sh"
-p Probe_command="/egateq00/scripts/reg_PROBE.sh" -p Child_mon_level=1 -p Network_resources_used=egateq00-lh-res -p Failover_enabled=FALSE
-p Stop_signal=15 egateq00-haegate_reg-res
The log under /var/cluster/logs/DS says following
07/01/2008 17:56:43 uhegateq02 START-INFO> scha_resource_open failed [14]. Keeping the old Log_level value
07/01/2008 17:56:43 uhegateq02 START-ERROR> Cannot access the start command </egateq00/scripts/reg_START.sh> : <No such file or directory>
07/01/2008 18:13:23 uhegateq02 START-INFO> scha_resource_open failed [14]. Keeping the old Log_level value
07/01/2008 18:13:23 uhegateq02 START-ERROR> Cannot access the start command </egateq00/scripts/reg_START.sh> : <No such file or directory>
However, I can open these scripts and run it from anywhere. I also tested these scripts and they all work fine. They are all set to chmod 777 , so everyone should have execute permission
Iam not returning any return value from these Start and Stop script , is that the why it is failing
thanks

Hi
I disabled the PMF as described on the http://blogs.sun.com/TF/entry/disabling_pmf_action_script_with. This is what I did
1>Added following line in the top of my Start script
while getopts 'R:G:' opt
do
case "${opt}" in
R) RESOURCE=${OPTARG};;
G) RESOURCEGROUP=${OPTARG};;
esac
done
sleep 60 &
/usr/cluster/bin/pmfadm -s ${RESOURCEGROUP},${RESOURCE},0.svc
2>While creating the resource , I used property for Start_command="/egateq00/scripts/reg_START.sh -R %RS_NAME -G %RG_NAME"
Now , after doing this , My RG is not getting lost. Also , in the message file I do not see the errors of "Start script failed to stay UP"
However, My Application is not started either.
This is what the message file says
Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_validate> completed successfully for resource <egateq00-haegat
e-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 0% of timeout <300 seconds>
Jul 3 16:43:32 uhegateq01 Cluster.CCR: [ID 973933 daemon.notice] resource egateq00-haegate-reg-res added.
Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <gds_svc_start> for resource <egateq00-haegate-reg-res>,
resource group <egateq00-rg>, node <uhegateq01>, timeout <120> seconds
Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 252072 daemon.notice] 50 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscgds/bin/gds_svc_star
t>:tag=<egateq00-rg.egateq00-haegate-reg-res.0>: Calling security_clnt_connect(..., host=<uhegateq01>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, .
Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_svc_start> completed successfully for resource <egateq00-haega
te-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 2% of timeout <120 seconds>
Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <gds_monitor_start> for resource <egateq00-haegate-reg-re
s>, resource group <egateq00-rg>, node <uhegateq01>, timeout <300> seconds
Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 252072 daemon.notice] 50 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscgds/bin/gds_monitor_
start>:tag=<egateq00-rg.egateq00-haegate-reg-res.7>: Calling security_clnt_connect(..., host=<uhegateq01>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1
, ...)Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_monitor_start> completed successfully for resource <egateq00-h
aegate-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 0% of timeout <300 seconds>
4>Also , in the /var/cluster/logs/DS , I see the Start script started succesfully
07/03/2008 16:43:32 uhegateq01 START-INFO> Start succeeded. [egateq00/scripts/reg_START.sh -R egateq00-haegate-reg-res -G egateq00-rg]
5>Also , in the /var/cluster/logs/DS , I see the Probe script returning 0 , but this is wierd because it should return Non zero number. When I run the Probe script from the command line , it is returning me non zero value when the application is down
07/03/2008 16:43:35 uhegateq01 PROBE-INFO> The GDS monitor (gds_probe) has been started
07/03/2008 16:44:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:44:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:45:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:45:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:46:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:46:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:47:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:47:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:48:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:48:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:49:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:49:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:50:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:50:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:51:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:51:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:52:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:52:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:53:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:53:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:54:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:54:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:55:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:55:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:56:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:56:35 uhegateq01 PROBE-INFO> The probe result is 0

Error while creating Routing using LSMW

Hi Guys ,
I am trying to create LSMW using Direct Input Method .
My structures are ::
RC271_DS Work center structure for direct input (for datasets)
RC27M_DS Material master view DIRECT INPUT routing for datasets
PLKO_DI_DS Header structure for direct input (for datasets)
PLPO_DI_DS Routing/item structure for direct input (for datasets.
I getting correct data from multiple flat files .
It's converting the data also .
But while executing start direct input method i am getting the followig error ....
You cannot edit the task list object with activity type
Please let me know problem guys .
Regards,
Raj

Hi Naveen,
It means you have to assign the task list type to material type ZPRD. Then it will carry its job:
The path is:
Go To-> SPRO-> IMG Activity-> Production-> Basic Data-> Routing-> General Data---> Define Material Type Assignments. T-Code: OP50
I hope it will work.
Regards,
Madhu.G

Error while creating BOM using BAPI 'BAPI_BOM_UPLOAD_SAVE'

Hi All,
We are getting an error as 'Data is incomplete' while trying to create BoM using the bapi 'BAPI_BOM_UPLOAD_SAVE', if the item contains Item category as 'T'. But for other item category like 'L' or 'N', the bapi is sucessfull.
The values that we pass to fill the item category 'T' are operation, item_cat, bom_itm_no, COMPON_QTY, FIXED_QTY as 'X', UNMEAS as 'ST', ITEM_TEXT1 and ITEM_TEXT2.
Anyone who has faced same problem or has a solution to the problem, kindly provide a solution.
Regards,
Vijay

The error you receive is because of different config for different Item Categories. Find out from the functional team what fields have they kept mandatory for the item category 'T'. You may not be passing one of those fields in the BAPI.
Try creating a BOM manually for item category 'T' and you may figure our which field you are missing.

Error while creating AW using DBMS_LOB with XML..

Hi All,
I am trying to create AW using DBMS_LOB package with XML,
while creating AW,i am facing the following error.find the code also below :
declare
xml_awcreate_clob clob;
xml_awcreate_st varchar2(4000);
begin
DBMS_LOB.CREATETEMPORARY(xml_awcreate_clob,TRUE);
dbms_lob.open(xml_awcreate_clob, DBMS_LOB.LOB_READWRITE);
dbms_lob.writeappend(xml_awcreate_clob, 48, '<?xml version = ''1.0'' encoding = ''UTF-8'' ?>');
dbms_lob.writeappend(xml_awcreate_clob, 43, '');
dbms_lob.writeappend(xml_awcreate_clob, 63, '<AWXML version = ''1.0'' timestamp = ''Mon Feb 11 13:29:11 2002'' >');
dbms_lob.writeappend(xml_awcreate_clob, 15, '<AWXML.content>');
dbms_lob.writeappend(xml_awcreate_clob, 25, ' <Create Id="Action41">');
dbms_lob.writeappend(xml_awcreate_clob, 19, ' <ActiveObject >');
dbms_lob.writeappend(xml_awcreate_clob, 163, ' <AW Name="NEW_XML_AW" LongName="NEW_XML_AW" ShortName="NEW_XML_AW" PluralName="NEW_XML_AW" Id="NEW_XML.AW"/>');
dbms_lob.writeappend(xml_awcreate_clob, 19, ' </ActiveObject>');
dbms_lob.writeappend(xml_awcreate_clob, 11, ' </Create>');
dbms_lob.writeappend(xml_awcreate_clob, 16, '</AWXML.content>');
dbms_lob.writeappend(xml_awcreate_clob, 8, '</AWXML>');
dbms_lob.close(xml_awcreate_clob);
xml_awcreate_st := sys.interactionExecute(xml_awcreate_clob);
end;
ORA-21560: argument 2 is null, invalid, or out of range
ORA-06512: at "SYS.DBMS_LOB", line 833
ORA-06512: at line 12
Any idea or thought on this would be appreciable.
Thanks in advance.
Anwar

Did you change any of the text in the lob write statements ?
I believe you get this error if you increase the number of characters without increasing the 1st argument which looks as though it represents the number of characters

Error while creating SR using CS_ServiceRequest_PUB.Create_ServiceRequest

Hi All,
I am getting below error while creating an SR from the backend using API 'CS_ServiceRequest_PUB'.
Error:
API Programming Error (CS_ServiceRequest_PUB.Create_ServiceRequest): An error occurred when validating the descriptive flexfield.
Additional information:Program error: Please inform your support representative that:
FLEXFIELDS SERVER-SIDE VALIDATION package reports error:
validate_desccols() exception: ORA-20005: DVLB.get_default_context() failed. SQLERRM: ORA-01403: no data found
ORA-06512: at "APPS.FND_FLEX_DESCVAL", line 931
ORA-01403: no data found
Error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
I have intialised the context as below while running the stand alone procedure in SQL Developer.
Fnd_Global.apps_initialize (user_id => 1368347,
resp_id => 21739
resp_appl_id => 514 );
We are on 11.5.10.2 and database version is 9i.
Can you please help??
TIA,
S

Hi Kesava,
I notice that in the package you used the application user_name=CHUNDUK calls the API pa_project_pub.create_project.
I wonder if you used chunduk as database user to execute the package Or you used APPS to execute the package?
The APi document states that it is a requirement to create a db username as the same name with the application username.
I have been running the problem to execute API 's delete project and try to figure what could be my problem.
TIA

ERROR IN CREATING PO USING BAPI

Hi friends,
My requirement is to create po using BAPI but i am getting error message .i have entered all the fields but still i am getting This errors.
E BAPI 001 No instance of object type Purchase Order has been created. External reference:
E MEPO 000 Purchase order still contains faulty items
E ME 645 Subcontracting as stock transfer within a company code not possible
I ME 123 Supplying and receiving plants identical (Please check)
please help.
thanks in advance.
Moderator message: please read message long texts, speak to a functional expert (these are not ABAP related errors), do more research before asking, do not use all capitals in the title.
Edited by: Thomas Zloch on Nov 30, 2011 1:06 PM

Hi
It seems you're creating a transfer order and an item is set for subcontracting, that's not possible, so check the item type
Max

Error in creating GUID using com.sap.guid API's

Hi
   i am trying to create GUID using com.sap.guid API's. I've included the guidgenerator.jar in the classpath. I ran the following code. i got the "Caused by: java.lang.NoClassDefFoundError: com/sap/guid/GUIDGeneratorFactory " error.
the code is
package com.portal;
import com.sapportals.portal.prt.component.;*
import com.sap.guid.GUIDGeneratorFactory;
import com.sap.guid.IGUID;
import com.sap.guid.IGUIDGenerator;
import com.sap.guid.IGUIDGeneratorFactory;
public class TestCompforGUID extends AbstractPortalComponent
    public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
*          IGUIDGenerator generator = GUIDGeneratorFactory.getInstance().createGUIDGenerator();*
*          String guid = generator.createGUID().toString();*
*          String hexGuid = generator.createGUID().toHexString();*
*          response.write(guid);*
*          response.write(hexGuid);*
can anyone created the GUID's using com.sap.guid API's and help me here.
Do i need to specify any reference in Portalapp.xml ?
Thanks,
Saravanan

difficult to reproduce. But it might be a data conversion problem.
e.g. try
to_char(a.num_tabs)If that's not the error comment out certain lines or xmltags and test which one is the reason for the error.
Edited by: Sven W. on Sep 9, 2011 3:13 PM - typo correction

Error while creating database using DBCA

Hi,
I installed Oracle10gR2 on my windows machine.Now am creating a database with dbca but just after i click the finish button it gives me the error -
Cannot create directory "F:\oracle\cfgtoollogs\dbca\ora10g" where F:\oracle is the directory where i have installed Oracle 10g and ora10g is the database name.
I have full permission on the folders.Can anyone please let me know what is the problem here.
Regards,
Somd

Hi OrionNet,
At last i could create the database successfully.But these are the issues I faced and am listing down the solution so that it can help others too.
1.I could not find the Administrative Tools-> Local security Policy --> Local Policies --> User Right Assignment in the Windows Vista Home Premium.I went and checked many blogs and forums on where is it located.It seems it is not included in the home premium and people are having a tough time working out the round abouts.
2.The problem was that my UAC (User Account Control) in the Windows Security Center was turned on which was not allowing me to create the database.I turned it off,and it created the db smoothly.
Thanks a lot for your help..I really appreciate it :)
Regards,
Somd

Error when running report using SDK

Hi, I am getting following error when I am running a report in boxi r2 sp3 on IIS. Infoview and CMC runs fine but SDK application is not able to connect to CMS. This error does not come all the time. It happens intermittently.
Error in RetrieveReport: Unable to connect to cluster @hisuatcluster to retrieve updated CMS member list. Logon cannot continue.
Anyone has seen this and any way to pin point the cause. We have used -ns and -port switch in the command line of CMS and all servers.
Thanks,

will try that. But we would not be leveraging cluster benefit then. What happens if that particilar CMS in cluster goes down.
Below is the logic of SDK.
1.     Create an EnterpriseSession by calling SessionMgr.Login(the credentials we use to connect on in the web.config file).
2.     Get a reference to the InfoStore with EnterpriseSession.GetService(u201CInfoStoreu201D)
3.     Get a reference to the report as an InfoObject by querying the InfoStore u2013 InfoStore.Query(u201CSELECT * FROM CI_INFOOBJECTS WHERE u2026u201D)
4.     Get a reference to the RASReportFactory u2013 EnterpriseSession.GetService(u201Cu201D, u201CRASReportFactoryu201D)
5.     Open the report using the InfoObject (line 3) and RASReportFactory (line 4) u2013 ReportClientDoc = ReportAppFactory.OpenDocument(InfoObject.ID, 0)
6.     Manipulate the reportu2019s connection information.
7.     Set the vieweru2019s report source with the report (this is commented out in the current tests) u2013 CrystalReportViewer.ReportSource = ReportClientDocument
8.     Close the session u2013 EnterpriseSession.Logoff()

Error in creating JE using SDK

Similar Messages

Maybe you are looking for