Error in Creating R/3 (4.6c) Source System
Hi all,
In SM59, Basis had already established RFC connection to both systems. When I tried to create Source System connection to an R/3 system (4.6c) from BI 2004s in RSA1, I got a message that says <b>"No connection to system possible."</b>
<i>No connection to system possible
Message no. RSAR501
Diagnosis
Logical system cannot be accessed.
System Response
Error when opening an RFC connection
Procedure
Use transaction SM59 (for BAPI and SAP source systems) or DBCO (for database source systems) to check the RFC parameters of source system . Also check whether the system can be accessed in the network and whether the necessary application and system programs have been started.</i>
Why is this so?
Thank you for your assistance.
Regards,
julius
Hi CK,
<b>Which Logical System</b> should I assign in SAP R/3 (SPRO): logical system of <b>BI or R/3?</b>
The RFC connection works fine in SM59 in BI.
Thanks for the assistance.
Hope to hear further assistance and ideas.
regards,
julius
Similar Messages
-
How to create Web Service as a source system in BI and configure a DS
Hello,
I was wondering if you can give me the links to information where it is explained how to create Web Service as a source system in BI 7 NW 2004s and also how to create a data source that would read data from that Web Service?
Thanks,
AGHi AG.
Please check the following documentation which talk about this questions.
[Creating Web Service Source System|http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a618ae07211d2acb80000e829fbfe/frameset.htm]
[Creating DataSources for WebServices|http://help.sap.com/saphelp_nw70/helpdata/EN/43/ec90a315434c5de10000000a155369/frameset.htm]
[Transfering Data Using WebServices|http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a618ae07211d2acb80000e829fbfe/frameset.htm]
I hope that I can be helpful.
Thanks,
Walter Oliveira. -
How To create a new R/3 source System ?
Hello,
Can somebody guide me to a white paper or something related which explains in detail how to create a new R/3 source System in BW?hi jay,
while i don't have a white paper, it was as simple as right-clicking the source systems tree in AWB and creating a new one - the process is simplified if you're using release 3.0E up, but i can't help you much if not. but you basically have to create an RFC connection to the source system, create a BW user, assign the IDOCs properly (this one i don't know how to do), and linking them all up together in one source system.
if i come across any notes, i'd be more than happy to help.
i'll try asking our Basis people too, just in case they know of anything i could point you at.
ryan. -
PowerView error -Cannot create a connection to data source 'TemporaryDataSource'.
Hello and thanks for the time.
I am getting the following error when trying to create a powerview report. I don't get where is this TemporaryDataSource is and how do I check the permissions on it? that is what this error is pointing to, no? I tried re-installing the
SQL reporting add-in and no go there. SQL Browser services are running. I can see the file in Excel just can't create a powerview report. any and all help is appreciated. thanks.
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'https://teamsite.domain.com/POWERPIVOT/PowerPivot%20Gallery/Test.xlsx'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink
xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'https://teamsite.domain.com/POWERPIVOT/PowerPivot%20Gallery/Test.xlsx'. Verify that the connection information is
correct and that you have permissions to access the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'TemporaryDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error
navigate to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>Hi,
Issue not supported in sharepoint on-premise team.
In addition, as this issue is related to Powerview, I suggest you create a new thread on for Powerview forum, more experts will assist you.
https://social.technet.microsoft.com/Forums/en-US/home?forum=powerview
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Power View error: Cannot create a connection to data source 'EntityDataSource'
I have Power View on SharePoint 2013. I have both Multidimentional and Tabular model in use.
I have several Report.drlx file in Report libary in SharePoint.
My colleague is getting following error when building report by dragging Facts and Dimentions to report.
On the hand, I'm not receiving error.
Error is cannot create a connection to data source 'EntityDataSource'
<detail><ErrorCode xmlns="rsErrorOpeningConnection</ErrorCode><HttpStatus">http://www.microsoft.com/sql/reportingservices">rsErrorOpeningConnection</ErrorCode><HttpStatus
xmlns="400</HttpStatus><Message">http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="Cannot">http://www.microsoft.com/sql/reportingservices">Cannot
create a connection to data source 'EntityDataSource'.</Message><HelpLink xmlns="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=12.0.2000.8</HelpLink><ProductName">http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=12.0.2000.8</HelpLink><ProductName
xmlns="Microsoft">http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="12.0.2000.8</ProductVersion><ProductLocaleId">http://www.microsoft.com/sql/reportingservices">12.0.2000.8</ProductVersion><ProductLocaleId
xmlns="1033</ProductLocaleId><OperatingSystem">http://www.microsoft.com/sql/reportingservices">1033</ProductLocaleId><OperatingSystem xmlns="OsIndependent</OperatingSystem><CountryLocaleId">http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="1033</CountryLocaleId><MoreInformation">http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="<Source>Microsoft.ReportingServices.ProcessingCore</Source><Message">http://www.microsoft.com/sql/reportingservices"><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message
msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=12.0.2000.8"
xmlns:msrs="Cannot">http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.AdomdClient</Source><Message></Message><MoreInformation><Source>Microsoft.SharePoint</Source><Message>Could
not retrieve a valid Windows identity.</Message><MoreInformation><Source>mscorlib</Source><Message>WTS0003: The caller is not authorized to access the service.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings
xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Kenny_IHi Kenny_I,
As per my understanding, I think this issue may be caused by your colleague has no permission to access to data source 'EntityDataSource', it is a Kerberos issue. When report server uses ‘Windows authentication (integrated) or SharePoint user’ as the credentials
to access the data source 'EntityDataSource', the authentication would be failed. So we should try to check if the issue is in this scenario. If in this case, we should change the credentials to stored credentials.
Besides, if we don’t configure C2WTS Service Account to use Local System, it needs the following local policy rights:
Act as part of the operating system.
Impersonate a client after authentication.
Log on as a service.
For more details, please refer to the following blog:
http://www.codeovereasy.com/2014/01/powerview-report-fails-no-credentials-are-available-in-the-security-package/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Error is data loading from 3rd party source system with DBCONNECT
Hi,
We have just finished an upgrade of SAP BW 3.10 to SAP NW 7.0 EHP1.
After the upgrade, we are facing a problem with data loads from a third party Oracle source system using DBConnect.
The connection is working OK and we can see the tables in the source system. But we cannot load the data.
The error in the monitor is as follows:
'Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.'
But, unfortunately, the error message has no further information.
If we look at the job log in sm37, the job finished with the following log -
27.10.2009 12:14:19 Job started 00 516 S
27.10.2009 12:14:19 Step 001 started (program RSBATCH1, variant &0000000000119, user ID RXSAHA) 00 550 S
27.10.2009 12:14:23 Start InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG RSM1 797 S
27.10.2009 12:14:24 Element NOAUTHORITYCHECK is not available in the container OL 356 S
27.10.2009 12:14:24 InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG created request REQU_4FMXSQ6TLSK5CYLXPBOGKF31G RSM1 796 S
27.10.2009 12:14:24 Job finished 00 517 S
In a BW 3.10 system, there is no message related to element NOAUTHORITYCHECK. So, I am wondering if this is something new in NW 7.0.
Thanks in advance,
RajibThere will be three things to get the errors like this
1.RFC CONNECTION FAILED
2.CHECK THE SOURCE SYSTEM
3.CHECK IT OUT WITH Oracle Consultants WEATHER THEY ARE FILLING UP THE LOADS.TELL THEM TO STOP
4.CHECK I DOC PROCESSING
5.FINALLY MEMORY ISSUES.
6.CATCH THE DATA SOURCE FIRST CHANGE IT AND THEN ACTIVATE AND RUN THE LOAD
7.LAST IS MEMORY ISSUE.
and also Check the RFC connection in SM59 If it is ok then
check the SAP note : 692195 for authorization
Santosh -
Error Infosource is not defined in the source system
I am extracting data into ODS. It was running perfectly till now. But today i am getting this error.and for all packages i run. whether it is transaction data or master data.
I replicated the DataSource and activated all the objects and transfer structure.but still getting the same error.
I even created a new DataSource and infosource but still the error persists. please help me in this matter.
Thanksthe data is extracted from BW system itself (Self System).
there are three tables linked to each other.I have created an infoset query and creted datasource on that infoset query.
the source system is the same bw system.
The detailed error report is -
InfoSource is not defined in the source system.
Message no. R3005
Diagnosis
The InfoSource specified in the data request, is not defined in the source system.
System response
The data transfer is terminated.
Procedure
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing . -
Error in Previewing data from a UD Source System
Hi,
I have created a data source from a UD Source System; however, when I preview data, I am prompted by this message:
"Inbound processing of data package 000001 finished"
There is no error, but there is also no data preview that is displayed.
Can you help me with my problem?
I look forward to your reply experts!
Regards,
RamonHi,
sampling is out of a directory placed on the CLIENT. On runtime the directory must be placed on the SERVER.
So you must have two locations: one for sampling (*local) and one for (*remote) and before deployment you must switch from _local to _remote.
The _remote location points to a directory on the SERVER, don't forget to grant read/write privileges to the oracle user on the file system.
Regards,
Detlef -
Error: Infoobject is not defined in the source system
hi
(I posted this in other forums as well - but wondering, it it should be here in BCT/Extractors - I could use more help).
this is my issue:
I am trying to load master data (attr) for an infoobject.
But, it fails with the following error message (when I click on the "Error message" button on the "monitor" screen.
"Infoobject is not defined in the source system"
"Erros in source system".
(I did rsa3 and find it has some data + i checked on the base table as well, it has data; the datasource is from an SRM system) Why is it complaining like this.
any help on what could be wrong here? Pl let me know,
thanksThanks Ricardo,
I have tried that b4. and it says the "source system connection is OK".
any other idea?
Do I have to install the infoobjects on the source system as well? SRM is my source system.. I am not sure on that, but If I have to, how do I do that?
thanks
Message was edited by: Esan -
Error in loading data into PSA from source system.
Hi Experts !!!
Good morning .
I am trying to load data from SRM source system into BI system.When I execute infopackage,the data is not loaded into PSA and status of the process immediately becomes yellow.After sometime it gets timed out and converts to RED.When I checked the error documentation I found that the iDOCS response was not received from the source system.Detailed error is as below.
System Response
There are idocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further Analysis
Check the TRFC log
you can access this log using the wizard OR menu path "Environment > Transact. RFC> In the source system
However,I was not able to navigate to this path.I think if I can navigate to this path,I can manually push IDOCS from source system to BI system.
Regards,
Mandar.Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then check the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
IDOC getting struck at TRFC (SM58)
1.Reorg of table (ARFCSSTATE )
2.Incraesing the resources in the system (no of processes and memory ) , as this issue happens owing to this.
Source system tries to send TRFC to target and if there are no WP's available it will come to Transaction Recorded state, and form here it will not try to send this TRFC.So you have to execute this manually.
Also we can increase the timeout parameter so that it can try few more times to send before actually it comes to recorded state.
Regards,
Suman -
Getting error like Information was stored in the source system
hai friends...
In Process chain, selecting particular info package delta and then selcting display messages am getting like...
"Information was stored in the source system"
data is not loading in to data targets....
Edited by: ganandkumar on Sep 15, 2010 10:24 AMi am planning to load data in to PSA ...so i started and then it is showing like "
The last delta update was incorrect !
Therefore, no new delta update is possible.
You can cancel the request or:
Attempt to load the data of the last delta update again
so now i need to run this and i have to load data in PSA ...
suggest me friends... -
Error while creating a new report data source in Sharepoint Document library
I installed SSRS(sql server 2012 SP1) in my sharepoint 2013 farm(single server installation).
I have installed SSRS addin for report also.
I created a document library and included the report data source content type, report builder report and report builder model content types. On click of any of these content types i get the below error.
"new Document requires a Microsoft SharePoint Foundation-compatible application and web browser. To add document to document library, click on the 'Upload' button."
I am using windows 7 64-bit operation system with Google chrome and IE 8 64 bit.
Any help would be appreciated.Rakesh, is this an SSRS question?
This doesn't look like Power View.
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Version error while creating info package of data source 0fi_gl_10
Dear Friends,
I have replicated the data source 0fi_gl_10 into sap bw but while creating info package i am getting error " The DataSource 0FI_GL_10(E01CLNT200) does not exist in object version A". IS the manual activation always should be done for that ?
Regards
NileshHi,
Please check if the veriosn of DataSource is A or not. Sometimes it shows as active but if you open the datasource then it might be in modified version only. Do activate it manually, it will serve your purpose to create a infopackge.
Regards,
Anjum. -
Error while creating WBS element.. regarding source structure
I am creating a project and then a WBS element. Its a investment project. While creating WBS element XXX, it gives me error that "WBS element XXX: SOurce assignments for source structure A1 missing in Investment Profile ZZZZZ."
What shall I check? what could be the reason?
Thanks,
Ahi,
In this IMG activity, you define the source structures used when settling and costing joint products.
A source structure contains several source assignments, each of which contains the individual cost elements or cost element intervals to be settled using the same distribution rules
Just consult with your CO Consultant...
Venkatesh -
Error while creating a support message in satellite system
Hi,
I am facing an error while sending a support message to solman form the satellite system
(( Error Description : Error in Local Message System: Error when opening
an RFC connection Message was Not Created ))
1) I gone through various threads and set the required authorizations like
SAP_SUPPDESK_CREATE and
SAP_SV_FDB_NOTIF_BC_ADMIN ,
SAP_SUPPDESK_ADMIN
for the user in the solman .
2) I checked the RFC connection and it is working fine.
Anyone pls help me to resolve this issuehi rohit,
thanks for u r immmediate response
do i have to assign the roles to the user in the satellite system or the solman.
some roles in those 4 roles are not in the satellite system.
thanks
Rahul
Maybe you are looking for
-
Slow start - Satellite A200-1KZ PSAE3
Hi, I have a Satellite A200-1KZ PSAE3 running Windows Vista Home Premium. I have a clean install, so I have no third-apps running in my energy system. I have the SKAA140a.rom (v 1.40). I have installed the Mobile Intel(R) 965 Express Chipset Family (
-
Customizing Standard Workflow Log
Hi All, Good Morning! I'm asking this question from an end user perspective. Is there a standard way to bring the workflow log on the main document screen (for example: ME23n) so that user need not navigate to workflow overview? Also there are many i
-
my facebook (f) icon wont go away and i have no new notifications or messages. same thing with my myspace icon. anyone know how to fix this please???
-
Why is my screen name not displayed?
Hello, When I signed up for the community forums I selected a screen name but my full name, not screen name, shows up when I post a question. I don't see full names displayed for any other users, why does my full name show up? How can this be fixed?
-
I want the leopard version of dictionary and not the snow leopard one.
with leopard, the dictionary was a red book on the desktop. it was oxford english dictionary and had a couple of other sources available. then snow leopard replaced it with a senseless tool that requires precise spelling of the word before it will lo