Error in creating RSDS using transfer rules for master data datasources
Hi ,
when i am creating the transfermations(RSDS) using transfer rules for master data datasources while i want to migrate datasource.it is giving the error message saying that INITIAL ERROR OCCURED DURING GENERATION OF THE TRANSFERMATION.AND in the taskbar it is giving the message LOG IS BEING LOADED.
MY QUESTION IS HOW CAN WE SEE THE LOG? AND
PLEASE GIVE ME THE STEPS TO MIGRATE MASTER DATASOURCES.
THANKS IN ADVANCE .
Hi Ankit,
Yoy have to load data to the cube.For that you need update rules.
Steps to load data to the cube
1.Replicate the datasource.
2.Assign Infosource
3.Create transfer rules
4.Maintain the update rules to the cube.
5.Right click on the datasource and schedule an infopackage for it.
Execute the Infopackage and pull the data to the cube.
Hope this helps
Regards
Karthik
Similar Messages
-
Error : Concatenated values used in documents for master data
Hi Experts,
I am trying to add one characteristics as compounding characteristics to my master data info object.
previously 'Document property' option was checked for the infoobject. so i unchecked it, as it was not allowing me to add the compounding characterisitcs.
After doing the changes, when I am trying to save, its throwing error as 'Concatenated values used in documents for master data'.
Can anyone please help me with what exactly does it mean and what would be the solution to remove this error.
Thanks,
Neelima
Edited by: Potnuru Neelima on Mar 1, 2011 8:39 AM
Edited by: Potnuru Neelima on Mar 1, 2011 8:40 AM
Edited by: Potnuru Neelima on Mar 1, 2011 8:41 AMHi All,
Just found the soultion...wanted to share this....
Actually one document was created on one of my opportunity values, which was not simply visible from edit menu -> documents.
Go to RSA1 -> documents -> master data -> and then give ur info object name -> will get all the documents maintained corresponding to it. Need to delete them.
Then compounding characteristic can be added to our info object.
Regards,
Neelima -
Transfer Rules for 7.0 Datasource
Hi All,
I am trying to create Transfer rules for 7.0 Datasource, but i am not able to see the 7.0 datasource when i try to assign it to infosource, currently i am using DTP(and it works fine), but is there any way to avoid using DTP and use Transfer rules and update rules for 7.0 datasource?
Thanks,
Shetty.Hi,
Probably BI7.0 datasouces are migrated so u have to again convert into 3.5 datasource using RSDS transaction.
If u want to use 3.5 objects (Infosource) then just install in 3.x version then use that for u r transformation and BI7.0 objects let it be there there is no problem with that.
Thanks,
Debasish -
Concatenated values used in documents for master data-Urgent
Hi,
while trying to activate a master data object, it is not activating and this message appears
"Concatenated values used in documents for master data"
Please help me in this regard.Hi,
this forum is about the SAP BusinessObjects BI Solution Architecture. I would suggest you post your questions into the SAP BW forum.
regards
Ingo Hilgefort -
Why we are not using "Message Control" for Master data ?
Hi friends,
We are using Message control as output determination for Transactional data, <b>what is the main reason for not using the msg control for Master data.</b>Please explain with details...
I am very thankful to them...
Thanks and Regards.
<i><b>Naveen Kumar. Chamala</b></i>Hi Naveen,
Listing down those I know -
1. Master data is expected to be changed/created less frequestly.
2. Transactional data is expected to be chnaged/created more frequestly.
3. Transactions to create/change/display master data do no have message control integration, since you are not supposed to print/fax/mail master data to your partners.
4. Distribution of master data in generally supposed to happen within Enterprise boundry and typically you will have one central server maintaining master data which will be distributed to multiple downstream operation system (Some thing where MDM fits). So ideally when distributing master data using ALE you will be sending it to multiple systems.
5. Distributing transactional data PO/SO etc is same as sending fax/print which fits with the requirement of message control.
Hope this helps,
Regards,
Sanjeev -
Why to use chnage pointers for master data idoc why not the change idoc
Hi Gurus,
I have one doubt about Idoc.
When changes to master data has to be sent Change pointers are configured and used. (CDPOS & CDHDR). In case of the transaction data change change idoc is used as is the case with orders (we use ORDCHG for ORDERS message type to send the chnage details to a order which was already sent to other system.
Why we can't use change idoc or message type whatever, instead of Chnage pointers in case of master data or vice versa in case of transaction data.
Your valuable input will be rewarded with suitable points!!
-B S B.Hi,
It was a good question ... SAP seems never designed the change pointer to handle transactional data IDocs. Only for master data IDocs distribution purposes.
It may due to volume data ... the transactional data can change many times within a day compare with master data which hardly change or once a while.
Regards,
Ferry Lianto -
0Gender Transfer Rules for its Text Datasource Missing
Dear Experts,
While checking 0Gender infoobject, I do not see any transfer rules connected to the 0Gender_Text Datasource?
Within the 0Gender Display in RSD1, I see text data loaded into /BI0/TGENDER table.
In the Business content activation under any grouping too no transfer rules are present.
I am on BI 7SP17 and BI Cont 703 SP6.
Can anyone please help.
Thanks,
Raj JainHi Raj Jain,
Try the below SAP Note...
SAP Note Number: 329874:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bct/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d333239383734%7d
Hope this helps u...
Regards,
KK. -
BW 3.5 update rules for master data
Hi all,
I create a dummy report in that report lifnr is charactics and name its att. after this i create a application component and assign data source and create infopkg data coming in lifnr and name field properly <b>i assign data source using direct master data update</b> after this i create infocube and assign dim.
but when i rgt click on infocube and display dataflow it shows only one level and when i open bex and open that it shows no application data found why this happened after creating infocube it is nessory that i creat update rule for this am i right plz send your openion.
thxHi Ankit,
Yoy have to load data to the cube.For that you need update rules.
Steps to load data to the cube
1.Replicate the datasource.
2.Assign Infosource
3.Create transfer rules
4.Maintain the update rules to the cube.
5.Right click on the datasource and schedule an infopackage for it.
Execute the Infopackage and pull the data to the cube.
Hope this helps
Regards
Karthik -
Transfer Routine for Master Data
I want to write a transfer routine to load the text.
I want to load Short text as some word 'EXACT' in the T-table, if the value of that attribute is blank. While loading the master data.
Eg: In 0Equipment there is some attribute say ZEQUI .
I want a routine where: If ZEQUI is blank then load the Short text as 'EXACT'
Please its urgent, can anybody tell me how to do this & some sample code....
Thanks
Regards,
MaddyTexts are language specific so you will need to decide on what languages you want 'EXACT' to appear.
Once you have that done, you can create a flexible update and write a transfer or update rule to read the attributes before populating the text table.
some pseudo code would be:
1) Select equipment and attributes into internal table
2) Read internal table for specific record
3) determine if the attribute field is blank
4) If blank, return 'EXACT' -
Program to activate update rule for master data (info objects)..very urgent
Hi all,
I have an info provider(A0CUSTOMN). For this the update rules are not active.In production system i am not able activate.Please let me know if there is any program to activate the update rule for masterdata(info object).
Thanks=points
ManjulaHi Manjula,
Leave the id and infocube field blank. Just provide the infosource name.
BTW is this a direct update master data object? In that case all this is not relevant.
Check if it appears as an Infoprovider.
I did not ask enough questions to start with.
BR/
Mathew. -
Effect of 'No update' for master data texts
Hello all,
I am using flexible update - update rules - for master data text. I want to confirm effect of 'No update' in following scenario
In the fisrt set of update rules -from first source system -I have mapped both short text and long text
Key | short text| long text
......| overwrite| overwrite
K1 | some SHTX| some LGTX
In the second set of update rules, I have selected 'No update' for Long text
Key | short text | long text
......|overwrite| NO UPDATE
K1 | some SHTX |
My loading sequence is first source system followed by second source system
what should be my ultimate long text and why?
Many thanks in advance!
Regards
SanjyotHi surekha,
your long text will not get changed.
Take the example you mentioned
Key | short text.....| long text
........| overwrite......| overwrite
K1 | some SHTX.. | some LGTX
In the second set of update rules, I have selected 'No update' for Long text
Key | short text... | long text
........|overwrite......| NO UPDATE
K1 | some SHTX. |
In the second set of update rules, you mentioned "No UPdate", So, when a record with the same key is found n Masterdata, it is not going to make any changes to the field Long text.
Where as short text will get overwritten.
Take some data for ex with the above mentioned type
data from source 1 : 2000 Maggi Noodles
data from source 2 : 2000 Feasters
when the data from first source system arrives, data will be 2000 maggi noodles
when the data from second source suystem arrives, as there exist this records with same key(2000), it checks for the other fiels
short text will be over written with the value in second system (according to rules its in overwrite mode)
Long text will not be updated as the rule says no update.
hope this helps,
Cheers,
Srinath.
Cheers,
Srinath. -
Error in creating transfer rules beween infosource and datasource in BI 7.0
Hello Guys
I am gettting the following error when trying to create transfer rules between infosource and datasource.
1. Error while activating transformation
2. Deletion of Objects with Type Transformation
3. Preprocessing/Collecting DDIC Objects for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
4. Post Processing/Checking the Deletion for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
5. Object Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K has been deleted
6. Name of object of type 'TRCS' is missing
7. Name of object of type 'TRCS' is missing
8.Key rule 1 (target field: 0COMP_CODE): Initial update set
9. Key rule 2 (target field: 0PLANT): Initial update set
10. Key rule 3 (target field: 0OI_EBELN): Initial update set
11. Key rule 4 (target field: 0AC_DOC_NO): Initial update set
12. No rule exists
13. Saving Objects with Type Transformation
14. Saving Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
15. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K saved successfully
16. Activation of Objects with Type Transformation
17. Saving Objects with Type Transformation
18. Internal Activation (Transformation )
19. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
20. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
21. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
22. Syntax error in GP_ERR_RSTRAN_MASTER_TMPL, row 1,644 (-> long text)
23. Error during generation
24. Error when activating Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
25. Resetting of Incorrect Objects Back to the Active Version (Transformation )
26. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
27. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
28. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
29. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was reset to the active version
Can anyone send me a document on how to create cubes, info and data sources,ODS's,multicubes and t/f and update rules in BI 7.0
Thanks.Transformations in BI7
http://help.sap.com/saphelp_nw04s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Regards,
R.Ravi -
Error in Transfer rules for 0REQESTER
Hi,
I have a routine in transfer rules for standard Infosource 2LIS_02_ITM for 0REQESTER.
routine goes like this
INCLUDE rsbctbbp_transfer_r3.
TABLES: srm_proj_contr.
DATA: l_s_errorlog TYPE rssm_s_errorlog_int,
l_text TYPE string.
data: l_rc type i.
perform bbp_get_requester using TRAN_STRUCTURE-afnam
RECORD_NO
g_s_minfo
changing RESULT
g_t_errorlog
l_rc.
returncode <> 0 means skip this record
RETURNCODE = l_rc.
abort <> 0 means skip whole data package !!!
ABORT = 0.
ENDFORM.
FORM INVERT_REQUESTER
USING I_RT_CHAVL_CS TYPE RSARC_RT_CHAVL
I_THX_SELECTION_CS TYPE RSARC_THX_SELCS
CHANGING C_T_SELECTION TYPE SBIWA_T_SELECT
E_EXACT TYPE RS_BOOL.
$$ begin of inverse routine - insert your code only below this line-
DATA:
L_S_SELECTION LIKE LINE OF C_T_SELECTION.
An empty selection means all values
CLEAR C_T_SELECTION.
L_S_SELECTION-FIELDNM = 'AFNAM'.
Selection of all values may be not exact
E_EXACT = RS_C_FALSE.
$$ end of inverse routine - insert your code only before this line -
ENDFORM.
this routine does not have any errors.
when i load the data data wil not be loaded and i will get the following error messege in details
Record 1 :No value found for attribute 0REQESTER for InfoObject 0USERNAME =
can anybody suggest me plz regarading this.
Thanks & Regards,
VijayaThanks!
-
Error while installing transfer rules for 0PM_C03 from Business content
Hi All,
When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error:
"Mapping between 2LIS_17_I3HDR 2LIS_17_ORDER is inconsistent".
Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR is the datasource.
Also, kindly let me know how can the Infosource and the datasource have different names, like in the case for this Cube.
Kindly help...Hi,
The datasource and infosource can have different names no issue with that.
and while selecting transfer rule for installing find with '2LIS_17_I3HDR'.
Regards,
Rathy -
Activating transfer rules for new source system
Hi
we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
Regards
SujaiHi Sujai,
There are many cases when this program is used.
When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
If the program does not work,then you are left with the transport option.
Thanks & Regards,
Suchitra.V
Maybe you are looking for
-
Hello. I'm a newbie working on my Master's thesis conserning a project that is based on old G-code made by another newbie so bear with me. I need to create a sequance of output controls. For this I'm using a for loop that eventually creates two trian
-
I turn on my a1300 camera then suddenly its lcd screen turns green..why?
i turn on my a1300 camera then suddenly its lcd screen turns green.. icons on the screen is in color green and its larger than the usual size of the icon...
-
Formatting macbook question??
By formatting my macbook does it delete all user accounts? Does it need the admin password to do this task? Or can you bypass..? Thanks in advance :)
-
Book won`t stay open in media overdrive after ios 7 install
In Media Overdrive my book won`t stay open after ios7 install. Please help!
-
How do I move my contacts to my new address
I have recently wiped my computer after saving all of my files on my backup hard drive, and installed tiger. I would like to know how to transfer all of my contacts from my back up hard drive to my main hard drive.