Error in creating task list /TMWFLOW/PROJCTC

Hello,
We are implementing charm in release 7.1.  We are getting an error some times that says that user was not able to create a task list for an urgent correction SMHF. 
The error message says:
There is no active task list in the associated project
However we run the charmcheck transaction and no error for the project.  Error SOCM_ACTION_LOG014.
Then we got the error saying
"Task list H.xxxxxxxx not created by user mmmmmmmmm
Error writing to table /TMWFLOW/PROJCTC"
Errors are
/TMWFLOW/TASKLIST304
/TMWFLOW/TASKLIST177
When we start testing early in the morning we can create the first ticket with no problem (every day the system is down for backup and then restarted).  However, subsequent ticket show this same error.
We checked SLG1, ST22, and SM12 to find any error, however we are not able to find any problem.
We think that problem is that something is blocking, however we are not able to find the error.
Please advice
Many thanks
Javier Mandiroal

Hello all,
We are facing the same issue.  While creating ZMHF (custom Urgent Change) users "sometime" receive error "There is no active task list in the associated project"
Hi Mateus , the document is you mentioned is currently expired / unavailable.  Can you kindly upload the same again please?
Thanks in advance,
Shaji Narayanan

Similar Messages

  • Error while creating task list

    Hi All,
    I am configuring change management , i have created project and assigned logical component for that when i create task list it gives below error .
    For object /TMWFLOW/M , number range interval 01 does not exist
    Message no. NR751
    Diagnosis
    The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
    Procedure
    Create the missing number range interval in customizing.
    Transaction code:
    I have already  maintained number ranges.
    Thanks
    Santosh

    Hi ,
    Make sure you maintain the number range interval to be no. "01" and not "1" or anything else. I kept getting the "Error reading information for number range object /TMWFLOW/D" (and /M/ and /V) even though I had added the number range interval as described in the manual. As soon as I deleted the interval "1" and put it back with "01" that check passed and I could create a task list.
    Thanks
    Abullais

  • Error when creating Task List in ChaRM

    I am getting this error after I activate Change Request Management and attempt to create a task list.
    Error writing to table /TMWFLOW/PROJCTC
    Message No. /TMWFLOW/TASKLIST177
    There is no long text. Please advise

    Configuring ChaRM in a new client, entries in the table above already existed for the maintenance cycle the new client was trying to generate. deleted entries form database.

  • Error when creating Task List: No Consolidation System found

    All-
    Configuring my Retrofit Scenario. My Project Landscape is maintained as following:
    Dev(100) --> QA (200) --> Prod (300) with Retrofit (XXX)
    Dev(XXX) --> QA 250
    I am getting this error when I try to refresh the project or create a Task List
    *No consolidation system found for <SID>-250 (project RETROFIT3)
    Message no. /TMWFLOW/TRACK_N806*
    If my QA client (250) is already maintained as a QA logical component. What else is missing?

    Hi,
    I have done something similar and getting error /TMWFLOW/TRACK_N806
    My Transport route looks something like
    System GND ZGND > 300 System GNQ 300> 300 System GNP
    Its a standard 3 system landscape with transport routes configured as mentioned above. I followed the write up as mentioned and have kept only one transport route but how do i create a transport route from GND-140 to GNQ-300 .
    The layer ZGND has been associated with client 140 which is the development client here. The layer ZGND is the consolidation layer, how else should i associate it with the client 140.
    Please advice.
    Regards
    Ankan

  • CHaRM : unable to create Task List

    Hi All,
    we are trying to configure Charm in our Solman 7.0 sp16.
    when i create a project and and click on "Create Task List" under SystemLandscapte>>ChangeRequests Tab
    error "The Project is not released. Hence cycle cannot be released.
    Now when i click on the check button. the following errors are displayed
    Check Logical Components
            No Consolidation System found for XXX-XXX(SM2-200) (Project Charm_Test)
            +No Tract for Project Charm_test with log. system SM2/200
    Check Consistency of project CHARM_TEST
          + CTS Projects in production systems for project CHARM_TEST+
    can anyone help me out here.
    Thanks!
    Regards,
    Pradeep L

    Hi Pradeep,
    This issue is because of Solution Manger TMS is not configured properly.
    Use this blog for STMS configuration: /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    OR
    Better use SPRO to configure STMS, Just follow SPRO step by step process.
    SPRO->SAP Solution Manager->Configuration->Scenario-Specific Settings->Change Management
    ->Change Request Management->Standard Configuration->Transport Mnaagement System(TMS)
    1. Do you try to activate ChaRM for any satellite system landscape(DEV->QAS->PRD?
    OR
    2. Do you try to test ChaRM in Solution Manager itself(SM100(DEV)->SM200(QAS)->SM300(PRD)?
    If your test belongs to point 2, then follow the blog that i mentioned above. It gives a step by step details.
    Note:
    1. For anycase, DEV to QAS should be consolidation route and QAS to PRD should be delivery route.
    2. SM TMS should have SAP transport layer as well as atleast one customized transport layer.
    3. ChaRM supports only client specific transport management system.
    Let me know if you need more help on this.
    Regards,
    Sanjai

  • Error while creating request list Unable to detect the SAP system directory

    We are upgrading SAP BW (NW 7.0 EHP1) to SAP BW (NW 7.3)
    source OS: Windows 2008 R2,  source DB: MSSQL server 2008 R2 SP1 CU3
    I had started the upgrade by running: STARTUP.BAT
    I had started the DSUGui on the server (CI / DB on the same server) from: D:\usr\sap\BP1\upg\sdt\exe\DSUGui.bat
    I ran both programs (run as administrators).
    Once SAP Gui connects and was able to create userid/ password and when ready to start the initialization phase (click next)
    gives me the error
    Error while creating request list - see preceeding messages. Unable to detect the SAP system directory on the local host
    I had tried STARTUP.BAT "jce_policy_zip=Z:\export-import\downloads\jce_policy-6'  and still the same error.
    I had started DSUGui.bat with trace and the trace file contents are
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[2.0.7.1006]/>
    <!NAME[D:
    usr
    sap
    bp1
    upg
    sdt
    trc
    server.trc]/>
    <!PATTERN[server.trc]/>
    <!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
    <!ENCODING[UTF8]/>
    <!LOGHEADER[END]/>
    Jan 11, 2012 10:14:58 AM [Error]:                          com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:102) [Thread[ExecuteWorker,5,main]]: Execution of command com.sap.sdt.engine.core.communication.CmdActionEvent@376433e4 failed: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
    Jan 11, 2012 10:14:58 AM [Error]:                          com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
    Jan 11, 2012 10:14:58 AM [Error]:                          com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
    Jan 11, 2012 10:14:58 AM [Error]:                                                 com.sap.sdt.engine.core.communication.CmdActionEvent [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
         at com.sap.sdt.dsu.service.req.DSURequestListBuilder.persistSystemInfo(DSURequestListBuilder.java:277)
         at com.sap.sdt.dsu.service.DSUService.createRequestList(DSUService.java:338)
         at com.sap.sdt.dsu.service.controls.DSUListener.actionNext(DSUListener.java:144)
         at com.sap.sdt.dsu.service.controls.DSUListener.actionPerformed(DSUListener.java:67)
         at com.sap.sdt.server.core.controls.SDTActionListener$Listener.actionPerformed(SDTActionListener.java:46)
         at com.sap.sdt.engine.core.communication.CmdActionEvent.actOnEvent(CmdActionEvent.java:43)
         at com.sap.sdt.engine.core.communication.CmdEvent.execute(CmdEvent.java:69)
         at com.sap.sdt.engine.core.communication.ExecWorker.handleCmd(ExecWorker.java:36)
         at com.sap.sdt.engine.core.communication.AbstractWorker.run(AbstractWorker.java:93)
    I could not get Upgrade started.  Any help is appreciated
    Thanks
    Prathap

    Did you get this solved?
    I have the same problem

  • Error while creating request list DSU execution error   in Upgrade PI

    Hello,
    I´m doing upgrade de PI 3.0 - 7.0 in mscs and run startup.bat...
    DSU execution error  on hostnode1.domain.sap
    Error while creating request list - see proceeding messages
    Instance profile for instance 00 on host hostnode1 not found profile SID_w*00_hostnode1 not found in directory ...../usr(sap/SID/profile
    Help please.
    Luis
    Edited by: Luis Maura on Nov 5, 2010 1:38 PM

    Instance profile for instance 00 on host hostnode1 not found profile SID_\w*00_hostnode1 not found in directory
    hostnode1 is physical or virtual ?, this file SID_\w00_hostnode1*  exist or not .
    compare the GLOBAL HOSTNAME settings in profiles of Default,Instance and start
    Regards,

  • Integration Builder - runtime data cache - Error when creating cache list

    All,
    When I go into the Integration Builder --> Administration --> Runtime tab --> Data Cache
    I get a message saying "Error when creating cache list".
    All cache areas look ok and I do not see any other error.
    Also, RFC INTEGRATION_DIRECTORY_HMI looks good.
    Please advise.
    Thanks a lot.

    Hi,
      Use transaction SXI_CACHE to update the Integration Directory cache. Alternatively, you can use the following URLs to update the CPA cache. Use XIDIRUSER to refresh the cache.
    For complete cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=full
    For delta cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=delta
    If this does not solve the issue, check transaction SLDCHECK to ensure that connection to SLD is available. If the connection fails, check the configuration in the transaction SLDAPICUST. Make sure that the password maintained is correct and the maintained service user is not locked.
    Now in the Integration Repository go to Environment u2192 Clear SLD Data Cache. Also go to Integration Directoy and clear the cache using menu Environment u2192 Clear SLD Data Cache.
    Open the XI Start Page and click on Administration. On the Repository tab, choose Cache Overview. Refresh the cache using the buttons/icons on the right. Use XIDIRUSER to refresh the cache. Carry out cache refresh in the same way on the Directory and Runtime tabs.
    regards,
    ganesh.

  • Error when creating cache list

    Hi,
    We have installed SAP PI 7.1 on AIX 5.3.
    When we check Data cache Overview (RWB-- Administration) we are getting an error "Error when creating cache list"
    Also
    While trying to  Test Cache Connectivity Test under RWB--->Component Monitoring,
    we are facing the below issue "Cache notification from Integration Directory failed: Error when notifying cache receiver Unable to notify integration runtime (Java) of data changes
    For input string: "ngsvawrk211.uk.corporg.net" Attempt to fetch cache data from Integration Directory not yet started or still in process".
    Please help me to resovle this issue.
    Thanks
    Deepu

    HI,
    Is this problem solved ?
    Plz let me know if you have find any solution for this.
    Thanks & Regards,
    Mahesh

  • Create Task List - fileds

    Dear Experts,
    While creating Task List, there are fields in user defaults box --- Profile and Change Number, please guide whats the use of these ? And if we will not use these fields will it hamper any scenario ??
    Plz guide
    rgrds
    DM

    hi
    The profile is one which you have created in IMG settings which is used for repeated values which you don't want to enter.and the change number is used if you have activated the Engineering change management.
    these fields will not hamper any process.if you have specified the profile there is no need to enter the values in the task list creation which you have already maintained
    regards
    thyagarajan

  • Solman Change Request Management Issue - about create task list

    Dears,
        We are now using Solman ChangeRM. I have created a maintainance project and maintained its logical component and IMG project. when I want to create a task list for this project, a message"The project is not released. Hence cycle can not be created" poped. The message no. is /TMWFLOW/CONFIG_UI017. Where can I release the project?
    Thanks
    Roger

    Hi,
    Pls click the check button(next to activate button)
    see the SLG1 log generated remove the errors shown in red.
    One it is done u press the refresh button & thn u cn create the task list
    chk
    https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
    /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
    Regards
    Prakhar

  • Error when activating Task List

    When activating the Task List in PROJECT_SOLAR_ADMIN, I receive the error
         - "Phase change from 'Created' to 'Development without Release' is not possible". 
    When I do a check on the Project, the only red light i get is for the following two jobs, and i'm not sure if this is the issue?  And if so, what i have missed in order to resolve it.
         - Error in background job for program /TMWFLOW/CMSSYSCOL2 error message No active job found
         - Error in background job for program RSGET_SMSY error message No active job found
    Thank you for any assistance,
    Margo

    Margo,
    We had similar issues with Phase change, but did not get the messages you are getting.
    I don't know the version of SM you are in, but as of 7.0 you can change the status of the project in transaction CRM_DNO_MONITOR.
    Exceute transaction CRM_DNO_MONITOR
    --> Select the Service desk created for your project and CLICK on "Details" button.
    -->Go to change Mode
    -->Click on Actions Button
    --> select the appropriate stage
    IMPORTANT:
    Click on save button.
    The phase selectedis updated AFTER YOU SAVE only.
    Regards
    Vijay

  • Error while creating task: The server was unable to save the form at this time. Please try again. (SharePoint 2013)

    I get the following error while saving a task inside task list:
    "The server was unable to save the form at this time. Please try again."
    I tried restarting "search service host controller".
    The server has 8 GB RAM and according to task manager, 6.67 GB is being used.
    I logged into the site with user which is the owner of the site. I tried creating tasks from client as well as the SharePoint server itself. Same error is shown in both the cases.
    How do I find information on the exact problem that is causing the error? What are possible solutions?

    Hi robikshrestha,
    This error message often shows when there is low memory that can be used, the workaround restart the “SharePoint Search Hosting Controller” service is to release some memory, and make it work. Whether restart the service release memory
    in your situation?
    Would you please check whether this issue happens all the time in task list, or happens sometimes when the memory is lower to use. If it doesn’t have a large impact, you can restart the server, check the result. have a look at the event
    log and ULS log, see whether there is related information.
    If it happens all the time, would you please use other browsers, whether the results are same? This may be caused by some add-ons in IE, like Free Download Manager I have seen.
    Thanks,
    Qiao Wei
    TechNet Community Support

  • GETTING ERROR RELATED TO TASK LIST IN ORDER CREATION USING BAPI_ALM_ORDER_M

    hi all ,
    I am using bapi_alm_order_maintain  to create a new work order . i am passing  task list group and task list counter in IT_TASK_list tables . on execution it is showing an error message "  PLEASE PROVIDE THE MANDATORY TASK LIST DURING WORK ORDER CREATION.
    SEEKING YOUR HELP TO REMOVE THIS ERROR.

    hi all ,
    I am using bapi_alm_order_maintain  to create a new work order . i am passing  task list group and task list counter in IT_TASK_list tables . on execution it is showing an error message "  PLEASE PROVIDE THE MANDATORY TASK LIST DURING WORK ORDER CREATION.
    SEEKING YOUR HELP TO REMOVE THIS ERROR.

  • Error in creating invoice list from VF21 transaction

    Hi,
    i am craetin a sales order fro VA01 transaction and for the perticular sales order number I am generating the billing document number.when I take this number and try to create a invoice list from vf21 transaction,it gives an error message as no invoice list can be created.and the processing status of the document becomes invalid.
    what can be the reasons?plz sugges....

    Hello all,
    We are facing the same issue.  While creating ZMHF (custom Urgent Change) users "sometime" receive error "There is no active task list in the associated project"
    Hi Mateus , the document is you mentioned is currently expired / unavailable.  Can you kindly upload the same again please?
    Thanks in advance,
    Shaji Narayanan

Maybe you are looking for

  • Dynamic select for all entries?

    Hi! Is it possible to do a dynamic SELECT FOR ALL ENTRIES IN... command? sg. like:   DATA:     select_text TYPE string,     from_text TYPE string,     where_text TYPE string.   SELECT FOR ALL ENTRIES IN <gt_table1> (select_text)   into corresponding

  • IK Bone Tool - How to change the picture of a bodypart in animation?

    I don't know how to word this any better. I have a puppet and all ready for animation. Now the question is how can I change the picture of a body part? Example on how I thought it would work: I have a walking puppet, and I can change the picture of t

  • Alignment/image insertion inTextArea  Problem

    can any one tell me how can I set the allignment for TextArea. And how to insert an image in TextArea.

  • Two buttons with different colors

    Hi,   I am very new to the Web Dynpro. I have placed two buttons in my web dynpro application. What to want to change the first button color to RED and Seond button color to GREEN. How to do this?

  • Can an iPad generate an electrostatic discharge?

    G'day, I am doing some work for a client where the environment is potentially hazardous. In doing process audits, one of the most efficient ways is to use an iPad and mark up the appropriate process system PDF file, however the question has been rais