Error in creation of sample database during installation of Oracle8

I am trying to install Oracle8 for Intel Solaris8. Near the end of installation - running database configuration assitant, the creation of the sample database failed by an alert:
ORA-03114: not connected to ORACLE
I also tried to run database configuration assistant in custom mode separately, "ORACLE not available" message came up.
I think ORACLE should be connected and running before creation of the sample DB, like installation of Oracle in Windows.
Anyone has the same problem or can give me a help?
The Oracle(8.1.7) CD comes with Solaris8 (07/01) package.
Thanks.

I would guess that your kernal parameters have not been set. Check you oracle install guide for the appropriate additions to /etc/system for semiphores and shared memory segments. If you have not made these changes, the database will not come up.
...jcd...

Similar Messages

Problem creating database during installation Oracle 8i

Hi!
When I was installing Oracle 8i a problem appeared. This problem was about Database creation, when the program of the Oracle installation was creating the database an error message was appeared : ORA-01034:ORACLE NOT AVAILABLE. I aborted the creation of the database and Oracle 8i was installed successfully.Now I'm trying to create the database with dbassist program but the same error is showed. Is there some solution?
In addition, I'm installing Oracle 8.1.7 in a Sunblade 100 Sparc with Solaris 8.0.
With best wishes, Jordi Carrasco.

did you define the variable ORACLE_SID and ORACLE_HOME?

Specifying hostname for the database during installation

I installed 11g r2 database as a Desktop server, nowhere during the installation did it ask me to review or change the hostname. It automatically used "localhost" as the hostname, and has written so in listener.ora, so no other machine on the network is able to use it. It only connects from within the same machine. Please help how to specify the hostname during installation.
Edited by: user4928701 on 8 Jul, 2011 11:15 PM

user4928701 wrote:
I installed 11g r2 database as a Desktop server, nowhere during the installation did it ask me to review or change the hostname. It automatically used "localhost" as the hostname, and has written so in listener.ora, so no other machine on the network is able to use it. It only connects from within the same machine. Please help how to specify the hostname during installation.
Edited by: user4928701 on 8 Jul, 2011 11:15 PMFirst, while the installation may (or may not) automatically create the listener.ora, it is not logically related. Creation/maintenance of listener has nothing to do with installation of software OR creation of a database.
Second, I believe (but am not sure, and setting up a test takes more time than I have at the moment) whatever automatic creation of listener may occur uses the hosts file to get that info.
Third, there is absolutely nothing stopping you from changing the listener.ora after the fact. There are no deep hooks between it and the installation.

Updated itunes, error message about mobile popped up during installation, then after installation, tunes will not start. gives error that a dll file is missing.

I downloaded the new Itunes version. During installation, there was an error message that said no Mobile access. After installation, Itunes would not open. Gave an error message that a DLL file was not found. Removed itunes from computer and initiated new download. Same problem with new download. Still does not open. I'm stumped. I have over 30,000 files in itunes and use it every day HELP

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Error in phase creating java users during installation!!

Hi,
We are getting error at step "Creating java Users" while installing NW 2004s SR1 non unicode dual stack on HP Ux Pa Risc 64 bit with database Oracle 10g.
Erro logs of file /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/sapinst_dev.log are as:
==================================================================================================
ERROR      2011-07-21 13:20:37
           CJSlibModule::writeError_impl()
CJS-30197 . For more details see output of logfile:
TRACE      [iaxxejsbas.hpp:460]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR      2011-07-21 13:20:37 [iaxxgenimp.cpp:736]
           showDialog()
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
=================================================================================================
Also please note that we have already 1 instance (dual stack) on same host and that is running fine.
Could someone please assist us in proceeding further.
Regards
Joy Garg

Hi,
Issue gets resolved by extracting manualy from JAVA_DVD_DIR/J2EE_OSINDEP/J2EEINSTALL.SAR to SAPINST install directory using SAPCAR. The path of this install directory is:/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install as:
> pwd
/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install
> SAPCAR -xvf /SW/NW_2004s_SR1Java_based_SW_Comp/J2EE_OSINDEP/J2EE-INST/J2EEINSTALL.SAR
Once we have extracted the J2EEINSTALL.SAR relaunch SAPINST again and the installation continue.
Regards
Joy garg
Once you will have extracted the J2EEINSTALL.SAR please launch SAPINST again and the installation will continue.

Error in "Start java Engine" phase during installation of Java AS

Hi All,
I am trying to install Java on Red Hat Server 5 with Maxdb as database and the installation is unable to pass the stage "Start java Engine" i have tried repeating the installation again also but getting stuck at the same place.
I tried starting the same from Command line but is unable to start the Server and DB is up and running.
Earlier on the same host i tried installing NW 7 ABAP stack and i was successful in that.
Any help is welcome.
Regards,
Sharib

Hi Anil
dev_server0 log file is pasted..
Can u please check this:
trc file: "/usr/sap/EP1/JC01/work/dev_server0", trc level: 1, release: "701"
[Thr 1146849600] Thu Jun 24 16:14:45 2010
[Thr 1146849600] ***LOG S98=> STISearchConv, no conv (80346248) [r3cpic_mt.c 6123]
[Thr 1146849600]
[Thr 1146849600] * LOCATION    CPIC (TCP/IP) on local host with Unicode
[Thr 1146849600] * ERROR       no conversation found with id 80346248
[Thr 1146849600] *
TIME        Thu Jun 24 16:14:45 2010
[Thr 1146849600] * RELEASE     701
[Thr 1146849600] * COMPONENT   CPIC (TCP/IP) with Unicode
[Thr 1146849600] * VERSION     3
[Thr 1146849600] * RC          473
[Thr 1146849600] * MODULE      r3cpic_mt.c
[Thr 1146849600] * LINE        6124
[Thr 1146849600] * COUNTER     2
[Thr 1146849600]
[Thr 1146849600]
[Thr 1146849600] * LOCATION    CPIC (TCP/IP) on local host with Unicode
[Thr 1146849600] * ERROR       illegal parameter value ( function=SAP_CMTIMEOUT2 /
             parameter=conversation_ID / value=80346248 )
[Thr 1146849600] *
TIME        Thu Jun 24 16:14:45 2010
[Thr 1146849600] * RELEASE     701
[Thr 1146849600] * COMPONENT   CPIC (TCP/IP) with Unicode
[Thr 1146849600] * VERSION     3
[Thr 1146849600] * RC          769
[Thr 1146849600] * MODULE      r3cpic_mt.c
[Thr 1146849600] * LINE        7340
[Thr 1146849600] * COUNTER     3
[Thr 1146849600] *
[Thr 1146849600]
</verbosegc>
[Thr 1146849600] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 1146849600]
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 1146849600] SigISetIgnoreAction : SIG_IGN for signal 17
[Thr 1146849600] JLaunchCloseProgram: good bye (exitcode = -11113)

Unable to connect to CMS database during installation

Hi all,
Previously when i perform a installation for BOE XI 3.1 on Windows 2003 Server (64 bit) with Oracle 10G 32bit version everything work fine. Now when try to install BOE XI 3.1 on Windows 2003 Server (64 bit) with Oracle 10G 64bit version CMS fail to connect to database.Belows are the installation sequence
Server A
Install Oracle 10G binaries - 64bit
Install Oracle patch 10.2.0.4.0
Create a new database
Configure ORACLE_HOME, ORACLE_SID
Install BOE XI 3.1 - ended with below error
2009/08/29 20:02:24.898|>>| | | 4064|3832| |||||||||||||||TraceLog::Admin: config (Config) ...
// config
active        = true;
severity      = 'W';
keep          = true;
always_close = false;
2009/08/29 20:02:24.898|>>| | | 4064|3832| |||||||||||||||TraceLog::Admin: pullable (true)
2009/08/29 20:02:24.898|>>| | | 4064|3832| |||||||||||||||TraceLog::Admin: update ()
2009/08/29 20:02:24.898|==| | | 4064|3832| |||||||||||||||TraceBridge::Initialize: pullable set to 1
.\tracelog_logger.cpp:359:bool __thiscall CXLib400::TraceBridge::Initialize(const class CXLib400::CParamLineTracker &): TraceLog message 5
2009/08/29 20:02:24.898|>>|A| | 4064|3832| |||||||||||||||The logFile argument is no longer accepted.
2009/08/29 20:02:24.898|==| | | 4064|3832| |||||||||||||||TraceLog state:
// device_info
// process        (process#pid)   = dbcheck#4064
// device         (name#deviceid) = dbcheck#MainDevice
// pull/push      (pullable)      = Pull
// pull mode settings
//   configfile   (ini)           = .\dbcheck_trace.ini
//   every ... s (period)        = 60
// config
active        = true;
severity      = 'W';
keep          = true;
always_close = false;
2009/08/29 20:02:24.913|==| | | 4064|3832| |||||||||||||||findDFA_LLR: [CmdLineDir] C:\BOBJ_INST\BOBJ_ENT31\51035055\package\dbcheck
sqlrule.llr
2009/08/29 20:02:24.913|==| | | 4064|3832| |||||||||||||||Loading: audit database subsystem only
2009/08/29 20:02:24.913|==| | | 4064|3832| |||||||||||||||loading libary succeeded
2009/08/29 20:02:24.913|==| | | 4064|3832| |||||||||||||||AuditDatabaseSubsystem::Init()
2009/08/29 20:02:24.913|==| | | 4064|3832| |||||||||||||||(d:\mira_rtm\src\framework\libs\cpp\dbwrapper\oracle\OracleXPlatWTF.h:94) Loading Oracle libclntsh client library.
2009/08/29 20:02:24.913|==| | | 4064|3832| |||||||||||||||(d:\mira_rtm\src\framework\libs\cpp\dbwrapper\oracle\OracleXPlatWTF.h:130) Could not load liboracle library because: Loading shared object failed. First tried to load library oci and failed because of error: [%1 is not a valid Win32 application.
]. Second tried to load library oci.dll and failed because of error: [%1 is not a valid Win32 application.
], 0
2009/08/29 20:02:24.929|==| | | 4064|3832| |||||||||||||||Unable to load audit database subsystem: Database access error. Reason Loading shared object failed. First tried to load library oci and failed because of error: [%1 is not a valid Win32 application.
]. Second tried to load library oci.dll and failed because of error: [%1 is not a valid Win32 application.
]. Error initializing database wrapper environment for AuditDBSubsystem.
2009/08/29 20:02:24.929|==| | | 4064|3832| |||||||||||||||AuditDatabaseSubsystem::Shutdown()
2009/08/29 20:02:24.929|==| | | 4064|3832| |||||||||||||||(..\..\servers\cpp\CMS\CMS\subsysmgr.cpp:747) component auditdatabasesubsystem not loaded
2009/08/29 20:02:24.929|==| | | 4064|3832| |||||||||||||||(.\dbutils.cpp:932) Caught DatabaseSubystem Error: Internal error: An unknown exception has occurred.
Regards,
CM Wong.
Edited by: Chek Ming Wong on Aug 30, 2009 5:15 AM

Hi,
even if you have a 64bit version of Oracle running, you need to have the 32bit oracle client installed on the machine where the BOBJ server runs on.
Regards,
Stratpo

ERROR: Ldap Authentication failed for dap during installation of iAS 6.0 SP3

I am attempting to install ias Enterprise Edition (6.0 SP3) on solaris 2.8 using typical in basesetup. I am trying to install new Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url ldap://hostname:389/o=NetScape Root user id admin (151: Unknown Error)
Fatal Slapd did not add Directory server information to config Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to restart
LDAP. When finished, press ENTER to continue, or S to skip this step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at javax.naming.NameNotFoundException.<init>(NameNotFoundException.java: 48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I got the following error;
"Cant connect ot the admin server. The url is not correct or the server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login. make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
Madhavi

Hi,
Make sure that the directory server is installed first. If it is running
ok, then you can try adding an admin user, please check the following
technote.
http://knowledgebase.iplanet.com/ikb/kb/articles/4106.html
regards
Swami
madhavi korupolu wrote:
I am attempting to install ias Enterprise Edition (6.0 SP3) on
solaris 2.8 using typical in basesetup. I am trying to install new
Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url
ldap://hostname:389/o=NetScape Root user id admin (151: Unknown
Error)
Fatal Slapd did not add Directory server information to config
Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to
restart
LDAP. When finished, press ENTER to continue, or S to skip this
step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at
javax.naming.NameNotFoundException.<init>(NameNotFoundException.java:
48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown
Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I
got the following error;
"Cant connect ot the admin server. The url is not correct or the
server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login.
make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
Madhavi
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

CALL TO SYSLIB FAILED ERROR WHILE SAP 4.7 DATABASE INSTANCE INSTALLATION

I am trying to install SAP 4.7 with Oracle 9.2.0.1 on W2k SP3. I have installed central instance successfully. While installing Database instance, almost at the end of installation, i am facing problem with error message call to system library failed. i am attaching the log. Please help
PHASE 2007-06-25 00:53:53
SAP R/3 Enterprise 4.70 for Oracle
PHASE 2007-06-25 00:53:53
SAP Web Application Server
PHASE 2007-06-25 00:53:53
Request common parameters of SAP System
PHASE 2007-06-25 00:53:54
Create operating system accounts
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:57
Request operating system user information
PHASE 2007-06-25 00:53:57
Request operating system user information
PHASE 2007-06-25 00:53:57
Request operating system user information
PHASE 2007-06-25 00:53:57
Request operating system user information
PHASE 2007-06-25 00:53:57
Request operating system user information
PHASE 2007-06-25 00:54:00
Adapt filesystem
PHASE 2007-06-25 00:54:00
Prepare check/adapt SAP instance filesystem
PHASE 2007-06-25 00:54:00
Extract archives
PHASE 2007-06-25 00:54:01
Extract SAP System kernel archives
PHASE 2007-06-25 00:54:02
Create service ports
PHASE 2007-06-25 00:54:02
Generate instance profiles
PHASE 2007-06-25 00:54:02
Versionize default profile, instance profile and start profile
INFO 2007-06-25 00:54:07
Copying file E:/SAPinst ORACLE KERNEL/keydb.xml to: E:/SAPinst ORACLE KERNEL/keydb.3.xml.
INFO 2007-06-25 00:54:07
Creating file E:\SAPinst ORACLE KERNEL\keydb.3.xml.
WARNING 2007-06-25 00:54:11
Error 1314 (A required privilege is not held by the client.
) in execution of a 'CreateProcess' function, line (276), with parameter (E:\oracle\ora92/bin/sqlplus.exe /NOLOG @ora_scr_tmp.sql).
ERROR 2007-06-25 00:54:11
MDB-06029 Caught exception while trying to start script executing application: [E:\oracle\ora92/bin/sqlplus.exe].
ERROR 2007-06-25 00:54:11
MDB-06030 A call to the system library failed. System error message: [Unknown error].
ERROR 2007-06-25 00:54:11
MUT-02011 Internal error: A call to syslib failed. System error message: Unknown error.
ERROR 2007-06-25 00:54:11
FJS-00012 Error when executing script.

What do mean with administrative priviledges? there is no administrativ priviledge on Windows. We only have a local group administrators.
in 4.7 sapinst will put erpadm and sapserviceerp to the local administrators group. There is no need to do it manually.
But this will not help in this case, because local Administrators did not have the rights
- replace process level token
- act as part of the operating system
if you don't believe me have a look at gpedit.msc Local Computer Policy - Computer Configartion - Windows Settings - Security Settings - Local Policy - User Rights Assignemt.
But as I already told you, log on and log off will fix this rights problem.
2. regarding memory: RAM is physical Memory
did I read right you are trying to install 4.7 on a 256 MB box?
forget that! 256 MB is often too less for office application. Enterprise Style applications and database will need at least ten times 256 MB (and even that is too small).
By the way Pagefile needs to be at least 4-8 GB.
Peter
Peter

Re: Kindly help Error: Solution Manager key is invalid during installation

Dear member
I need an urgent assistence if any buddy can help me I would be very great full, I am receiving an error during the installation of SAP ERP 2004 SR1 IDES, ABAP system central instance as for this I have to give a key to SAPINST which I generated from Solution Manager 4.0 I striclty followed the same step which is defined in SAPNote 811923. But the SAPINST not accepting the key it gives me an error "SAP Solution manager key is invalid ".
So guys any idea how can I get rid of this
Kind Regards
Sohail

Hi Syed,
the installation asks you for 'central SAP system' which must match the string for 'message server' when generating the key in solution manager exactly. maybe you can double check if you used the correct hostname (not FQDN) and made no typo?...
hope this helps...
cheers,
Walter

Error connecting to the "sample database"

I am a newbie going through the ColdFusion Help. I am at
"Getting Started with Dreamweaver > Tutorial: Developing a Web
Application > Define a Record Set". When I test the record set
(step 10), I am getting
this error, which says
there is a syntax error in the FROM clause.
The SQL statement looks like this:
SELECT *
FROM C:\Program Files\Macromedia\Dreamweaver
8\Tutorial_assets\cafe_townsend\data\tutorial.COMMENTS
ORDER BY LAST_NAME ASC
where the .mdb file is located in its default location:
C:\Program Files\Macromedia\Dreamweaver
8\Tutorial_assets\cafe_townsend\data\tutorial.mdb
Can anyone help me?? Why are these basic tutorials messing up
for me!?!?!??

Do
SELECT *
FROM [C:\Program Files\Macromedia\Dreamweaver
8\Tutorial_assets\cafe_townsend\data\tutorial.mdb].tableName
ORDER BY LAST_NAME ASC

Error: JAR & JAD don't match during installation in Nokia 7650

hi all'
i have developed an application with midp 1.0 /cldc. its working fine in nokia & motorola simulator. but while installing in Nokia 7650 real device it shows the following error:
***** Jad & Jar don't Match.
i have created the jar & jad with sun j2me wtk 1.0
thanx

hi,
sorry! this is not the answer to your problem but a request for your help instead. Actually I
read ur msg n found that u're a bit expert in this technology so plzz help me out in displaying/downloading the MIDlet appln which i've developed using RMI and servlets on a WAP/GPRS/JAVA enabled cell phone(Samsung-C100).
actually i know that the .jad file can be downloaded on the cell phone directly but how that happens i don't know, plzz help me.
Thanks
Animesh

Error message "setenv.ini not found" during installation

I want to install the XP Pro version from cd but I get the error message "setenv.ini not found"

Hello
Hmmm... there must be something wrong with recovery disc. What to do now?
You can try to contact your local dealer and see if they can help. Other way, contact nearest Toshiba authorized service provider. If they can confirm that recovery media is not OK they can order new one for you. For free I think.

When trying to download itunes I get this error message An error occurred during Installation of Assembly " Microsoft VC80CRT type=win32".version "8.0.50727.4053", public key token =1fc8b3b9a1e18e3b"processor Architecture="AMD64", please advise

When trying to download itunes I get this error message. An errr occurred during installation of assemby " Microsoft VC80CRT type=wind32" vversion "8.9.50727.4054, public key token=1fc8b9a1e3b"processor Architecture="AMD64" Please advise

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Curve 9300 error message: there was a problem during installation. Please try again when using app world

hi
I have a curve 9300 using os 6 and the latest app world 2.1.1.. something
when i try to download apps it initiates the download then after a couple of seconds after starting it shows the error message "there was a problem during installation. Please try again"
i have tried ALL the suppourt forums (KB26671 and KB30074) and suggestions/threads and called my network but none have worked.
these were reinstallign app world, making a new blackberry id as the other email address was associated with an old blackberry, security wiping the phone then restoring it and entering the new bb id, changing the date to 2014 and then hard wiping the phone and restoring it
i have twitter, facebook and bbm ect apps but these are RIM made i think and already preinstalled. everything else on the phone works fine
i have tried both wifi and network internet and battery pull
i really dont know what else to try or who else to contact to fix it. very annoying paying for a service you cant even use!
any help or more ideas would be great!
thanks

Hello carckberrypie,
In this case i would recommend wiping the BlackBerry smartphone. To do this we would need to back up the BlackBerry smartphone http://bit.ly/aSediX
Once backed up please follow the link below to perform a security wipe of your BlackBerry smartphone.
Link: http://www.blackberry.com/btsc/KB14058
Test the BlackBerry smartphone and proceed with a selective restore as outlined below.
Link: http://www.blackberry.com/btsc/KB10339
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Error in creation of sample database during installation of Oracle8

Similar Messages

Maybe you are looking for