Error in creation of source system

Hi Experts,
We are facing a problem while creation of source system. We are getting an error "You have no authorization for basic types (activity 03)" Kindly help me to resolve this issue.
Regards,
Jitendra

Hi there,
if you get the error again, please go tcode su53 directly and see for which object the authorization is missing. I understand you have SAP_ALL access but for any authorization issue we normally go to SU53 tcode and verfiy.
So once you get the object name then go to SU01 and open your id. Go to authorization tab and find for that object and see if '03' activity is assigned to you or not.
If this step is absolutely fine then we can think of alternative solution.
Regards,
Anup

Similar Messages

Error message from the source system

Hi,
I'm trying to load 0SD_O03 & 0SD_C03 using fullupload.
I have data in source system which I checked in RSA3.
I deleted the init request from the Infopackage.
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Please help!
Thanks,
Vish

I see a shortdump in BW system with runtime error
MESSAGE_TYPE_X
The current application program detected a situation which
should not occur. Therefore, a termination with a short du
triggered on purpose by the key word MESSAGE (type X).
Hi A.H.P,
It didn't happen to other extractions. I just started with this one. I set up the table in SAP R/3 system and when I tried to do the initial full load in SAP BW, it comes up with the above error.
Thanks,
Vish

Error message from the source system, Caller 09 contains an error message.

Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....

Caller 09 is a very common issue - please search the forums before posting....
Arun

Error occurred in the source system

Hi,
I am receiving the below error while loading data from APO system
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
******On further investigating the error message I get the following Diagnosis and Resolution details.*****
Diagnosis
    The sequence for creating time series in LiveCache is:
    1. Characteristic value combinations are created which in turn create
        planning object in the system
    2. The combination of version, planning area, and planning object is
        initialized, creating time series in LiveCache. This combination is
        so to speak the LiveCache anchor.
    This error occurs if
    o   New characteristic value combinatons have been created for the
        master palnning object structure that is assigned to the planning
        area, but the time series objects were not created.
System response
     Processing cannot continue.
Procedure
     There are two methods of creating time series objects for individual
     characteristic value combinations:
         a) Re-initialize the version without deleting the time series
             objects beforehand.
         b) Execute the report program /SAPAPO/TS_LCM_PLOB_DELTA_SYNC.
     In general SAP recommend that when you generate new characteristic value
     combinations, you set the Create time series objects indicator. This
     prevents this error from occurring.
Please let me know what I need to do to rectify this error. Please send me the steps to overcome this error.
Regards,
Tyson

Hi tyson,
Has it run good before? if yes, try to restore the source system.
by right click on the source system then choose restore.
It will require you to fill in some information about RFC destination. contact with your basis to have the information about: Target host, Sys no, and Sys ID of your APO system.
hope it help. Give point if you see its helpful.
Chuong Hoang

Error message: While activating source system in RSA1

When trying to activate a source system, I am getting a error message saying, Incorrect IDoc type ZSAG018 in the ALE definition of the source system.
System response: Error when sending data to BW.
Procedure: Enter Idoc type ZSAE008.
Prior to this there was a service pack that was applied to the R/3 system, and while testing thhe info package I got a error message and in source system when trying to activate, I get this message.
Can anybody kindly help me resolve the issue.
Message was edited by:
Muzafaruddin Mohammed

Hi,
You try to create the source sytem one more time by deleting it.And also delete the Partner Profiles, port number.
Re: Source connectivity problem
With rgds,
Anil Kumar Sharma .P

An error occurred in the source system when running infopackage

Hello,
I am using 0CO_PC_PCP_03 (Product Cost Planning: Itemizations Costing) and cube 0COPC_C10 (Exploded Itemization) in BI. RSA3 extractor checker shows that there is data if you put in a period.But as soon as I run the infopackage I get error    :
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
And i did put in the period in the internal formatfor FROM and TO in the selection tab on the infopakand but I am still getting the same error.
And when i go into details it gives me " Error occurred in the data selection "
Please assist
Thanks

I followed what you & Tarun advised and it shows the job as finished.Also this is what the log read:
Date        Time      Message
04/03/2009 12:49:29 Job started
04/03/2009 12:49:29 Step 001 started (program SBIE0001, variant &0000000000160, user ID DEVERP100)
04/03/2009 12:49:29 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
04/03/2009 12:49:29 DATASOURCE = 0CO_PC_PCP_03
04/03/2009 12:49:29 RLOGSYS    = DEVBI100
04/03/2009 12:49:29 REQUNR     = REQU_4DCA7N474P53QS8FJQ0RAKOW5
04/03/2009 12:49:29 UPDMODE    = F
04/03/2009 12:49:29 LANGUAGES = *
04/03/2009 12:49:29 *************************************************************************
04/03/2009 12:49:29 *          Current Values for Selected Profile Parameters               *
04/03/2009 12:49:29 *************************************************************************
04/03/2009 12:49:29 * abap/heap_area_nondia......... 2000683008                              *
04/03/2009 12:49:29 * abap/heap_area_total.......... 2000683008                              *
04/03/2009 12:49:29 * abap/heaplimit................ 40894464                                *
04/03/2009 12:49:29 * zcsa/installed_languages...... 1NEFDIJLPS                              *
04/03/2009 12:49:29 * zcsa/system_language.......... E                                       *
04/03/2009 12:49:29 * ztta/max_memreq_MB............ 2047                                    *
04/03/2009 12:49:29 * ztta/roll_area................ 3000320                                 *
04/03/2009 12:49:29 * ztta/roll_extension........... 2000683008                              *
04/03/2009 12:49:29 *************************************************************************
04/03/2009 12:49:29 Synchronized transmission of info IDoc 3 (1 parallel tasks)
04/03/2009 12:49:29 IDOC: Info IDoc 3, IDoc No. 6812, Duration 00:00:00
04/03/2009 12:49:29 IDoc: Start = 04/03/2009 12:49:29, End = 04/03/2009 12:49:29
04/03/2009 12:49:29 Job finished

An error occurred in the source system, DBIF_RSQL_SQL_ERROR

Dear All,
last 4 days my process chain stop, now todya i activate the process chain. i found a error In 0FI_AR-4.
the error i found
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
i already check in RSA3 , Once execute 0FI_AR_4 I Found a dump
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"BWFIR_READ_BSID_CPUDT_DATA" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
How to correct the error
The exception must either be prevented, caught within the procedure
"BWFIR_READ_BSID_CPUDT_DATA"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-25153: Temporary Tablespace is Empty"
Internal call code.........: "[RSQL/FTCH/BKPF_BSID ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU10"
"BWFIR_READ_BSID_CPUDT_DATA"
please any one help on this issue
Advance in thanks
Regards
Priya

Hi,
Can you please try adding the datafile to the PSAPTEMP tablespace in the source system, and try to start the process chain again. If required you have to contact the Basis Administration. Also please find the system logs and dumps in the source system at the point of time.
Can you please let me know if it got fixed.
Thanks & Regards,
VR

An error occurred in the source system

Hi Gurus,
when i am trying to load the data into the master data object 0PMNT_BLOCK_TEXT ,I am getting the error "an error occured in the source system"with caller 09. and the error message contains "no transfer structure available for info source 0PMNT_BLOCK_TEXT in the source system and "errors in source system".
I have loaded the data in development and quality environments succesfully.this problem is causing in production environment.all other loads are working fine.
Please give me your valuble inputs.
regards
Sridhar V

Hi,
there may be no connection with source system to BW system.
please check the same in RSA1 Source system tree for the source system, context menu, check the connection.
if not activate the transfer stru. of this object in BW system by replicating the datasource.
Regards,
Vishwa.

An error occurred in the source system (DB Conect)

Hi,
It message appear while an ODS was loading data fully to a Cube.
Please, can anyone help me to solve this problem?
Thank you very much in advance.
Jorge
Mensaje de error del sistema fuente
Diagnóstico
An error occurred in the source system.
Actividades en el sistema
An error occurred in Extractor .
Check the error message.
Procedimiento
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request.

HI,
go to RSA1->Source systems -> Right-click -> check. if the connection is OK then, u will find the message in the status bar saying that, source system connection ok.
otherwise select the source system>context menu>activate.
if its activated then replicate your data source if it is giving error while activating source system, then contact your BASIS Administrator to activate the Source system.
plz assign points
regards
vadlamudi

An error occured in the source system

My process chain has been doing FULL load for COPA data in a ODS. It failed today saying
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
When I click on indiv. Message tab I get "Job in source system terminated - Requests is set to red"
What should I do to resolve the problem.

For Source system R3 :
This particular problem "Job terminated in the source System" occurs when there are long running jobs in the backend.
In the monitor tab,
Environment --> Job Overview --> In the source system.
After logging into the source system, click execute
Check the status of the job i.e. active or failed.
Check the job log for the same.
If its " DBIF_SQL_..... " sort of error, then in this case, delete the request from the data target and reload again.
The load would be successful
Caller 09 error normally occurs when the source from which the datasource is picking up data may be in use on the R3 side.
Hope this helps!!!!!!!

'Error Occured in the Source System' for Non SAP system

Hi Gurus,
We have an Info Package which is getting the data from the Source System 'DOCP' and it has failed due to 'Error Occured in the Source System'.Since the source system is Non SAP system there is no option 'Replicate Data Sources'.So,First I activated the transfer rules by the program and ran the package again .But again the same error occured.
Please suggest me how to proceed for this error for Non SAP Systems?

Hi,
Check the RFC connection in SM59 and reactivate the source system again.
Hope this helps..
Thank you,
S R.

Error occured in the Source system while loading mater data

hi all
While loadng the master data info package.The request is getting failed with error occured in the source system.
error message says "if the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request".
 I had tried repeating the Request but again It is getting failed.
 please help me resolving the issue.
Thanks(=Points)
 Priya

Hello Priya
If u r loading thru flat file
1. Check the correct path in infopackage
2. Check if it is opened,if it is then close it and run package again
If loading thru R/3
1. Check DS is not opened in change mode
2. Check if RSA3 is able to extract data...if it is then check in RSA7 and chk IDOC status...
3. Are you running init..then make sure no document is posted in R/3 side...
Thanks
Tripple k

Loading and with error message :COLLECTION in SOURCE SYSTEM ENDED

Hi,
Facing problem with master data object while loading and with error message :COLLECTION in SOURCE SYSTEM ENDED
This load is getting failed every day. It is a full load and records are getting transferered and added.
when we check in details tab in RSMO all data packets in processing is green but in extraction some of the data selection scheduled are in yellow.We are changing QM status to green as records are added.
Version i am using is BW 3.5
Please let me know what will be the problem???
Thanks,
Edited by: lokesh thonsyd on Feb 18, 2009 8:55 AM

First try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.

Creation of Source System(R/3)

Hi,
I'm trying to create R/3 source system in BW(RSA1->Source system->Create) but it fails to create.
I have created RFC Destination on both BW & R/3 systems.
I tested them for 1) Test connection 2)Remote connection.
Sucessfully able to remotely login to each other systems.
But when i create from RSA1 its failing.
Any help please ?????????
Regards
prabhakar

Prabhakar,
while creating the Source System, if you right click on source system and go with check...it will give you the error. if you click on Question Mark or Help Ocon. it will what you need to do in order to get rid of this problem.
you need to create a entry in the RSADMIN table. check for RSA1> tools> there is an option that will update the table RSADMIN.
In furture, if you come accross any such problems with Source system... go with check.
all the best.
Regards,
Nagesh Ganisetti.

Error when creating SAP source-system in RSA1

hi,
we have a new bi-installation. the bi-system is running in the SAME system as our erp 2005-system is running.
the bi-client is 700, our source-system (FI/CO) client is 101. I want to create a source-system in RSA1. at the end i get the following error message:
Name D01MAND700 of client 700 is not the same as the name D01MAND101 of the Warehouse
Message no. R3225
Diagnosis
In order to guarantee error-free communication between the source system and the SAP Business Information Warehouse, the logical system names must be known to both.
The system has established that the selected source system name D01MAND101 in the SAP Business Information Warehouse is not the same as the logical system name D01MAND700.
System Response
Processing has been terminated and all changes undone.
Procedure
Create the source system under the name D01MAND700 in the SAP Business Information Warehouse or change the logical system name for client 700 to D01MAND101 in the ALE customizing screen of the source system.
Note that the logical system name for client 700 may already be being used for other ALE scenarios. If this is the case you are not able to change the name.
i don't understand this error ? is it because the BI-system and the erp-system is the SAME system ?
reg, Martin

mr. kapadia,
there is one entry in table rsbasidoc, and it looks like that:
SLOGSYS D01MAND700
RLOGSYS D01MAND700
OBJSTAT ACT
BIDOCTYP ZSCA017
TSIDOC3X 0
TSPREFIX CA
SRCTYPE M
SAPREL 700
TSTPNM D78358
TIMESTMP 20.070.622.093.042
SBWBCRL 700
RBWBCRL 700
looks strange, right ? what should i do ? delete this entry ? how can i do this, it is a customizing table, i cant delete it via SE16 ?!?
reg, Martin

Error in creation of source system

Similar Messages

Maybe you are looking for