Error in creation of stock thro Tcode MB1C
Hi,
while creation of stock thro Tcode MB1C i got the error posting period mentioned as 12/2002 to 11/2002.
I tried using Tcode OMSY to update my company's period and year as current year but it is grayad out.
Please advise
Regards
Ramya
Hi,
OMSY setting is used only for once & for all to fix up the Initial Period and Year for a company code for material management. After setting in OMSY, nobody should touch this setting.
Now 1st check in MM side in MMRV t.code which period open for your company code & back posting allowed or not. If period 11 & 12 not open, you can open in t.code MMPV
And also check in FI Side in t.code OB52 which period is open for in all Account Types A, K, D,M, S and specially Account Type u201C+u201D which stands for valid for all accounts types . If periods 11 & 12 not open, you can open for all account types.
Note:
Check your fiscal year variant for your company code in OBY6 t.code. If it is K4 , then open periods {Period start from January(01) & end in December(12)}. If it is V3 , then your periods {Period start from April(01) & end in March (12)}
Regards,
Biju K
Similar Messages
-
Error while creating stock using tcode: MB1C
Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not existHi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu -
While creating new stock using Tcode-MB1C
Dear sir,
I am getting an error - posting period 001 2012 is not open.
Thanks in Advance,
Sasi.
Edited by: Csaba Szommer on Jan 11, 2012 6:59 AMhi, basic question (should check old threads before posting questions).....
check below thread
while creating stock using tcode: mb1c
yogesh -
While creating stock using tcode: mb1c
THE ERROR : "POSTING PERIOD 001 2012 IS NOT OPEN"
how to resolve the above ticket
Edited by: b.sasibhushanam on Jan 10, 2012 12:46 PM
Moderator message:
Locked. Reason: basic question which has been discussed many times....
Please try to search and find answer on your own. If you cannot, please come back by providing a correct description of your problem.
And please use capitals properly.
Please also read forum rules.
Edited by: Csaba Szommer on Jan 10, 2012 8:34 AMHello Sir,
Please change the Period using the current date in the T-Code MMPV.
Regards,
Yawar Khan -
Error while initilizing the stock in MB1C T-Code
Hi gurus,
I am SD Guy. I am getting error when i am posting the stock by using MB1C - T Code. That error is "Number range for Transaction/even type WA in year 2011, does not exist."
I tried by using OBA7-Tcode, but it is not rectifying. Can you please tell me.
ThanksHi
check
Use t.code: OMBT
In the Menu Click Group -> maintain---> again click Group->insert
Next Screen
define
& then enter
u2026.Year u2026u2026u2026u2026From Number .............. To Number.
t.code: OMBA
Click u201CFinancial Accounting Document typesu201D & and you will have new screen and enter Number range and save.
Now try
Regards
kailas Ugale -
Error while saving INtial stock upload thru t-code MB1C
I am getting an error while saving the entered material quantity for initial stock overload thru MB1C
the error is "FOr object RF_BELEG GB10, number range interval 49 doesn't exist FBN1..
I am from SD module. Please help me resolve this issue.
THank you
BrianDear Brian
When you are carrying out the MB1C Txn, system document for account ing for the current is not existing, so you are getting this error.
Use FBN1 you will bet the screen Number Ranges for accounting Documents enter Your company code here "XXXX" then click the Intervals push button, you will go to the screen maintain number range Intervals , Check for 49 serial number whether you are having a number range for the current period if not then use the Insert Interval + button and enter 49 ,Year and the from & to number ranges. You can repeat the last years no. range in the current year also.
Best Regards
SAM
Edited by: samuel mendis on Apr 8, 2009 6:26 AM -
Hi SAP-SD Experts,
can u please answer the for the below message
when initiating the stock with 561 in TCODE mb1c, i got an error like this,
' couldnt determine receipents for message types ACPJMM.
Thanks,
Kavitha.PDear Kavitha
Either you can complete the customizing setting in BD64 or go to SM30, input table TRWCA and deactivate the component RWEX.
thanks
G. Lakshmipathi -
Created a material and want to post by using tcode mb1c, not allowing.?
friends i have a problem here, i created a material for my sales order. i wanted to post like 100 of them in my storage location. so i used tcode mb1c, entered the storage location , plant along with the movment type 561 . it goes in and there i enter the material and and the number to be posted (number of materials) .while saving it it gives the error ."posting period 008 2007 is not open" i had earlier encounterd with error saying some previous dates were closed and i used to closed the previous periods by tcode mmpv and bring it to the present date. but this is the first time when i am seeing that the present period is closed . . i tried with omsy and mmrv also. but i dont know what to do now. how can i open current months posting. i am in sd. dont have much idea about what mm guys do. please help .
Hi Seema,
In general, after creating ES, Cstmr,Matrl we need to execute MMPV before posting material. But in your case the periods are already closed, could be bcz some FICO consultant might have worked on it. But in order to resolve your problem u give a try to following prcdr.
Go to TCode OB52 [Posting Periods] and in the EIGHT column under heading YEAR change it to 2007 for the ROW "+"[Account Type]. Then proceed to MB1C.
In addition to this U may come across No. Range issue for which U uses TCode-FBN1; here for the current Yr. [2007] U have to give the No. Range for the interval appearing in the Error, eg 49,50,51...
Still if the problem persists consult a FICO for some alterations on the same screen [TCode-OB52].
Hope it might help U and reply the same to me
Regards. -
Travel Expense - Posting run error - Error during creation of posting run
Hi Guru's,
Look forward for your insights. Here you go with my question.
We are implementing Expense Mgt with Portal with out scope for payroll in SAP. I have set up Expense type, WT, Symbolic A/c to G/L Accounts. Im performing Unit testing currently.
Created Expense trip in ESS, from R/3 tcode PRAP, have approved trip, and settled through Tcode - PREC.
When I try to create posting run under transfer to accounting, I get following error
Error during creation of posting run number (->PR1
Message no. 56840
I'm not sure why this error was popping up. Appreciate your suggestion.
Regards
Praveen.NHi,
Since you are trying to make payment through FI, you need to maintain ur employee as Vendor. You can do it through PRAA.
So while creating posting run for this trip, it checks if the respective Vendor for this employee is maintained or not.
Pls maintain it as vendor and see if the errors are still coming.
Rakesh -
Error during creation of transfer orders for material
Hi,
We are doing a transfer of stock from one storage with WM to a storage without WM.
But system does not finish the process automatically displaing the following error message:
"Error during creation of transfer orders for material document 49000XXXX"
System cannot find source storage bin
Thanks in advance for the help
Regard
Enzoyour picking strategy does not find the bin where the material is.
So you need to check what value you have entered for picking in WM view of material master.
then you have to check where your material is (storage type and bin)
then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry. -
Error during creation of transfer orders for mateRIA
hi gurus,
I am getting an error while moving material from sl0c2 to sloc1 which is connected to wh by mvmt 321. the document is getting posted and the stock is coming to sloc1,but the error is
"Error during creation of transfer orders for mateRIAL.how to correct the error.
regards
muruganHi,
The material is maintained at the Warehouse level, hence warehouse transactions have to be completed, by creating a transfer order and the confirmation of the same will create a transfer posting from SL1 to SL2 in the system. This is trigerred automatically depending on the sytem configuration.
Regards,
raghu -
Hi Freinds,
I need to trigger the creation of a stock from a BAPI.
So in MIGO i am using movement type 501 and type as Others.
I could see a bapi BAPI_GOODSMVT_CREATE for that .But in the checktable for the tcodes t158g , i could not find MIGO.So i doubt if i can use this BAPI for the creation of a stock.
Please let me know if there is a BAPI for the creation of stocks.
Thanks and Regards,
AnoopHello,
Use the belwo bapi.
BAPI_WHSE_TO_CREATE_STOCK
Reward if helps.
Thanks,
Krishna -
hi
what is the use of tcode mb1c
pls reply
thanks in advanceHi Ashok,
The transaction MB1C is used to add the no. of stock to a material.In MIGO transaction you can post all or some of these stock of the material. -
Account determination error - in creation of invoice
Hello experts,
i have an error in creation of invoice, after( pgi post goods issue)
will you please help me out to solve this error.
thanks & Regards,
yogesh rainahello sir,
After going throuth this path it shows no gl account in account determination chart
as below
Condition type Message Description
ZPR0 123 Access KOFI not carried out (initialized field)
Access Message Description
10 123 Access KOFI not carried out (initialized field)
20 121 No G/L account found in Account determination type KOFI
30 123 Access KOFI not carried out (initialized field)
40 121 No G/L account found in Account determination type KOFI
50 121 No G/L account found in Account determination type KOFI
60 123 Access KOFI not carried out (initialized field) -
Error while creating interest rate instrument-Tcode-FTR_CREATE.
Error while creating interest rate instrument-Tcode-FTR_CREATE.
Thanks
VikasHi Tushar
Please maintain the detail in TPM 32
Product category
Product type
General valuation class
Account assignment reference
Regards
Maybe you are looking for
-
In R12 how to get recovery tax code for particular tax rule code.
Hi Experts, In 11i my query is SELECT recovery_rate FROM ap_tax_recvry_rates_all WHERE rule_id IN (SELECT tax_recovery_rule_id FROM ap_tax_codes_all ) I need to updade this query to R12.1.3.In R12 tax_code and rocovery code both are moved to single t
-
My video clips no longer show the video, just audio.
I have a video with stills and video. After a few changes (I know I changed the duration length of the stills and I was also trying to make sure that everything fit to the frame instead of being cropped) now the movie plays the audio portion of the
-
What do the ratios 16:9 or 4:3 mean?
Hello What do the ratios 16:9 or 4:3 mean on Wondershare3 or iMovie? Thank you, Peter
-
Hi, i'd like to utilize the J2EE capabilities for user management in my web application. I had a look at the Tomcat security sample which provides automatic login whenever a user tries to access a protected resource. This looks promising but the only
-
Adobe Audition CS5.5 is now Available for Purchase
http://www.adobe.com/products/audition.html Attention all you existing Audition users, Mac Public Beta users, and other early adopters: I encourage everyone to download the 30 day trial of Audition CS5.5 and/or purchase it. As always, we appreciate y