Error in creation PO for Asset

Hi All,
I am getting error while creation asset PO(Purchase Order)
here is the system error
G/L account 200200 cannot be used (please correct)
Message no. ME045
Diagnosis
Comparison of the field selection strings from the G/L account 200200 and the account assignment category A reveals that there is an incompatible combination of field selections for the field selection group 'Earmarked Funds'.
The G/L account field selection is stored in table T004F; that for the account assignment is stored in table T162K.
Procedure
Please enter a correct G/L account.
200200 is Asset aqcuisition gl
And also can you guide me what are the extra precausion need to take & configure for Creating Asset Purchase order
Thank you
Anil

Hi All,
1. One clarification, why Aquisition account effecting while creating PO?
2. the other issue,  when I run Maintain GR/IR clearing account (Choose Logistics -> Materials Management  -> Logistics Invoice Verification  -> GR/IR Account Maintenance  -> Maintain GR/IR Clearing Account)
I'm getting below error
For object RE_BELEG , number range interval 04 does not exis
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Thank you
Anil

Similar Messages

  • Error when posting invoice for Asset purchase order

    Hi,
    we are getting the errore message account determination for asset posting with keys not defined in chart of accounts,when posting an invoice for asset purchase order.
    Can any one see why this error is coming and what will be the solution.
    Nagesh

    Hi Prabhakar,
    Here is the reply,
    we have 10 line items,in which 3 items are freight related and other 7 items are related to goods reciept.
    i am trying to enter invoice for 3 line items at a time with two relevant to goods reciept and other related to non goods receipt(freight related).
    accounting entries generated after the GR are as follows,
    asset under construction account,and GR/IR account.
    Let me know the details is sufficient or not.

  • Error while creating PO for Asset is investment measure

    Hi All,
    I am getting error when I try to create PO for Asset which is investment measure.
    Error is as below:-
    Asset is investment measure, transaction type not allowed
    Message no. AK005
    Diagnosis
    Asset 305000003 0 that is to be posted is an investment measure. You are not allowed to post transactions that affect acquisition value using the current transaction.
    Procedure
    Check the asset and transaction type 120.
    I am using account assigment catergory 'A' in PO. I have checked Allowed transaction type for Acquisition and 120 is already allowed.
    Please guide.

    Hi,
    Try to create PO with account assignment category as P/N for project related ones.
    If the related asset is related to Investment Measure we need to settle transactions to WBS element and from WBS element to AUC. We cannot directly post to AUC.
    Thanks and Regards,
    padmaja

  • Got error "Enter distribution rule for Asset without a validity limit"

    Hi
    I need to make AUC settlement to GL account using t.code AIAB. I have maintained the settlement rule but when I click on check button I got message " Enter distribution rule for Asset without a validity limit". The error msg no. KD059.
    Thanks in advance.

    Please do the
    following. , instead of assigning cost center, assign fixed asset(any asset)
    Then go back and click on detach then create your normal rule again at the same
    line
    The rule is that AUC should have at least one settlements rule for fixed asset
    even if it not used

  • Error in IR document for asset document

    Hi Folks,
    I have a issue with GR IR Clearing.
    I have posted one purchase order for purchase of one asset.
    1) The GR Document has been posted as below:
    Posting key   account                              Amount
    70          140000 (ASSET)                    2906.03
    96          3000100 (GR IR Clearing account)          2906.03-
    (3000100 is a GR IR Clearing account)
    2)     Invoice Receipt document has been posted as below for the above GR document
    Posting key      account      Amount
    31                 1500 (Vendor )                    1039.13-
    86                 3000100 (GR IR Clearing account)     2096.03
    75                 140000 (ASSET)                    1866.90-
    Issue:
    While posting the above IR document by mistakenly the system is hitting Asset Account with an amount of 1866.90- which shouldnu2019t happen. Please let me know where exactly could be the account assignment causing this error.
    Thanks
    B.Venkatesh

    Hi,
    If there is any mismatch of GRIR value and Vendor Invoice value then it will post to asset account...
    Check the vendor invoice once.
    Thanks,
    padmaja

  • Error in Data Extraction for Asset Accouting Data Source

    Hi all,
    We have install the new flow of the Asset Accounting i.e 0FI_AA_20 data source. We are trying to load the data in BW. The problem is the volume of data is so high. Around 35 lacs records.
    I am getting below error while loading in the BW.
    "Error 7 when sending an IDoc"
    "No more storage space available for extending an i 3 "
    Please suggest..
    Regards,
    Macwan James.

    Hi Macwan James,
    Not only the requests from DS to which you are loading data. You can delete the requests from other DS--> manage screens also if they are no longer required.
    Or else use selection screen of Infopackage to load the data. Change the selections & try to load the data.
    Hope it helps!
    Regards,
    Pavan

  • WBS Assignment for Asset Error

    Dear Experts,
    In CJ03 transaction, checking the WBS data i found error in viewing of assigned asset.
    the Error Message showing "Data for asset view 0 is missing" in the tab of Asset under construction. i didnt understand and i checked the asset and found the asset is ok. kindly provide me a solution for this message.
    Thanks in advance,
    Raghav
    Edited by: Raghav K on Sep 12, 2008 8:34 AM

    Hi Satish,
    I am using the ECC6.0, so is this valid for my version?
    Thanks for the fastest reply also.
    Thanks and Regards,
    Raghav

  • Error while posting a write up for asset belonging to affiliated company

    Hi,
    I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
    Transaction type 790 not possible (posting to affiliated company)
    Message no. AA390
    I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
    Thanks
    Pragya

    Hi
    According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
    but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
    Is there any other way, to resolve the issue
    Thanks
    Pragya

  • Error - No GL account selected for Asset account in Business partner master

    Hi Experts,
    Scenario - While adding A/P Invoice for Asset item, the error "Error - No GL account selected for Asset account in Business partner master Message (3518-13)
    Awaiting your replies
    Regards,
    Sid

    Hi,
    You need to map the control account of that vendor(business partner).
    ->Open the respective Business Partner master data
    ->Under accounting tab
    ->Under General tab
    ->Control accounts (will be indicated with ... button),on opening this
    ->You will be prompted to map the control accounts
                                             ^ Down Payment Payables
                                             ^Assets Account
                                             ^Open Debts
    Here you need to map the Asset account which also must be a control account(control account option should be checked in the chart of accounts).
    Pls do check in the test system,understand the behavior of this account by booking ap invoice and payment,then proceed in the live system.
    Hope this is helpful

  • ERROR WHILE POSTING MIRO FOR MULTIPLE ACCOUNT ASSIGNMENT (ASSET)

    Hi Guys,
    We created  a PO for asset with multiple account assignment. And we immediately do IR instead of GR.
    While doing IR it is giving error
    1) Quantity delivered is zero - Warning message
    2) Account 245350 requires a Transaction Type or is Invalid - Error message
    what may be the problem. how can we eliminate and post it
    Regards
    palani

    Hi,
    I would assume the G/L account you used was not properly set up.  Did you get the same problem if you try to change to another G/L account?  Perhaps, get your FI specialist to look into this G/L account-related error and verify it.
    Cheers,
    HT

  • Projects Release  - Error: Enter a Distribution Rule for Asset without val

    Hi Experts ,
    While Releasing Projects , we got error :
    Enter a Distribution Rule for Asset without a Validity limit.
    Message No : KD059.
    Diagnosis:
    The settelement Profile used requires you to define a distribution rule for asset . For period 005 , 2009 , however not created a distribution rule for Asset.
    We gave checked Settelement Profile , still we are not clear what settings is causes for this error ,
    Please throw some light on if some one come across ...
    Regards,
    Sujana

    check out OSS note 115618

  • Error during GR for asset PO

    while doing GR for asset PO system is giving error message of "Acct123 for trans/ev  key ANL, is not a control account
    some one plz explain me the reason for this error and how to resolve.

    Hi,
    You are posting asset through MIGO so GL acocunt being debited for asset has to be Asset Reconciliation Account.
    Use ME23N and check GL account for Account assginemnt category A whether GL is control one.
    Or you can also check in AO90 that the GL assgined to account determination for particular asset class for depreciation areas is reconciliation one or not.
    Check whether u had maintianed GL account for ANL transaction event key in OBYC t.code
    Regards,
    KK

  • Error during creation of transfer orders for material

    Hi,
            We are doing a transfer of stock from one storage with WM to a storage without WM.
    But system does not finish the process automatically displaing the following error message:
    "Error during creation of transfer orders for material document 49000XXXX"
    System cannot find source storage bin
    Thanks in advance for the help
    Regard
    Enzo

    your picking strategy does not find the bin where the material is.
    So you need to check what value you have entered for picking in WM view of material master.
    then you have to check where your material is (storage type and bin)
    then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

  • User Exit / Badi / BTE for Asset creation A ?

    Hi Experts,
    I need User Exit  / BADI / BTE for asset Creation.
    After saving newly created Asset from As01 we need to send a mail to the person for whom the Asset is assigned.
    i have tried all this.But no one is triggering after saving the As01 transaction.
    Exit Name           Description                                                                               
    AAPM0001            Integration of asset accounting and plant maintenance                    
    AFAR0003            External changeover method                                               
    AFAR0004            Determination of proportional values for retirement                      
    AINT0004            Change amount posted for certain areas                                   
    AINT0005            Dummy for extended syntax check. Do not use.                             
    AISA0001            Assign Inventory Number                                                  
    AIST0001            Exchange number range in master data maintenance                         
    AIST0002            Customer fields in asset master                                          
    AMSP0002            Determine relationship type for two company codes                        
    TRAN0001            User exit for asset transfer           
    Please suggest if anybody worked on this.
    regards,
    Imran

    Hi,
    Check out the following posts pertaining to similar topic.
    Change Asset Workflow
    Asset Management WORKFLOW
    Regards
    Sreekanth

  • Creation of main asset master-as01-----DEPRICIATION TAB: (Error) empty

    HI  experts!
    I selected asset class :AML2000 Department A
    company code:AML
    enter
    Discription: Machine No.1
    Capitalization On :05.06.2011
    TIME DEPENDENT TAB
    Business are: AMLH
    DEPRICIATION TAB: Error: no fields in that tab ...its empty...
    Regards,
    Ramesh
    Edited by: sagiinfo on Oct 28, 2011 12:41 PM
    Edited by: sagiinfo on Oct 28, 2011 12:42 PM

    Hi,
    Also check Define Screen Layout for Asset Master Data & Define Screen Layout for Asset Depreciation Areas in Master Data in Asset Accounting.
    Trust this will resolve your issue.
    BR,
    Mehul

Maybe you are looking for

  • Minimized iTunes problems in Vista

    My iTunes works fine when it's not minimized. Once I minimize it to that iTunes toolbar thing, I can't reopen it by clicking on the maximize square. The music keeps playing but the minimized iTunes won't reopen. Also even though the music is playing,

  • Regarding Background pictures  Display

    hi Experts.....   i want  to diaplay  the background image  is very very dim....(light  appearence..) hw can i   upload the image   iun SE78.. i am facing  problems    are.. i am uploading image in bitmap format... if fedure is 100%    the  image app

  • Task completion in defined time

    Hello guys, I have to implement a scenario in SSIS package where it has to be insured that a collection of SQL task's  completes in a defined period of time and incase if these task's fails to complete in that interval of time then SSIS package shoul

  • ITunes optimizing 6000+ photos every sync

    I'm running the current version of iTunes (although it happened under the previous version as well) on Windows Vista Ultimate 64-Bit edition, and each and every time I sync, iTunes wants to re-optimize and re-sync every one of my 6000+ photos. Two iP

  • ORA-01410

    Folks, I need your help in finding the solution to the below problem. I very much appreciate any help.When I ran this command I am getting the following error: Please take a look. I was running the same without problem before. I will stop by in a min