Error in CRM sales order

Dear Experts,
We are creating an order in CRM2007 but unable to upload into ECC6.0.
When we create an order in crm BDOC has been generated with green when we click on the error message we are able to see errors with following
"Sold-to party 700001 not maintained for sales area 7777"
"Sales document 0005000005 was not changed"
But in the ECC we already maintained sales area for the sold to party 7000001.
Plz go through the links you will be getting clear idea what error we are facing .
1)http://s657.photobucket.com/albums/uu298/vallabhaneni/?action=view&current=oderdromcrmtoecc.jpg
2)http://s657.photobucket.com/albums/uu298/vallabhaneni/?action=view&current=ecccustomer.jpg
3)http://s657.photobucket.com/albums/uu298/vallabhaneni/?action=view&current=eccoder.jpg
Thanks & Regards
V.Srinivas

HI Srinivas,
I am sure you are doing some mistake somewhere. One way to check that is; try to make the exactly same order in ECC with exact same data.
Even in this message; in first place you have mentioned sold to part 700001 whereas in the second place you mentioned 7000001. That is a typical problem everyone do (mistyping the number of zeros). make sure thats not your issue.
Regards,
L

Similar Messages

Error Message"ERP adapter is called" for CRM sales order replicate to ERP

Hi All:
In our implemenation project, we use CRM7.0 stanard sales order type TA for sales order creation. And we did all the right configuration for sales order at CRM side. CRM sales order can be saved correctly.
But this CRM sales order couldn't be replicate into ERP, as in Middleware the corresponding BDoc message is yellow light and Error messsage show "ERP adapter is called".
Is anyone have same issue before, please kindly advise how to handling this issue and prossibile solution?
Best regards:
Kai

Hi Kai,
Is there any queue entry on transactions : SMQ1/SMQ2 with SYSFAIL status. If so, what is the error message it is showing?
Are you able to process the order further? Or getting an error message like "Document being distributed" or something?
Good luck,
Aaru

BDOC's to update the custom fields in R/3 from the CRM sales order

Dear All,
I need a small help.
My requirement is as follows.
When ever a sales order is created in CRM, an outbound delivery will be automatically created in the R/3 system.
There are some fields in the CRM sales order which are not there in the R/3 system.So I have to create these fields in the LIKP and LIPS tables in R/3 which is not a problem.
But I have to copy these fields from CRM to the LIKP and LIPS tables in R/3 when ever a sales order is created and saved in CRM. (This should happen automatically)
So could anyone tell me whether there are any BDOCs available to update the sales order info in the LIKP and LIPS tables and also any BADI which can be trigger for this purpose.
Thanks in advance.
Regards
Shafath

Hi,
Thanks a lot. You have given a good solution.
But a small correction.
Sales Order is not transferred from CRM to R/3. The system is creating (automatically) a delivery in the r/3 system for the sales order created in CRM (Here we will not have the sales order in R/3), so we dont have an entry in VBAK and VBAP tables.
When we create a sales order in CRM and save , the delivery in R/3 is created and the sales order is not transferred to R/3.
So while saving the sales order itself in CRM, I need to trigger a badi to update the LIKP and LIPS tables by calling a RFC (which needs to be developed in R/3).
So I need a badi which triggers when the sales order is saved and which tells whether the sales order is saved without errors or not (because delivery in R/3 is created for only those orders which are created and saved without errors in CRM) and returns the sales order number.
It will be helpful if you can send some info on this.
Any how thanks a lot for your quick response.
Regards
Shafath

How to pass R/3 Sales org unit to CRM Sales order ?

Hi,
We are creating CRM sales order using FM ' <b>CRMXIF_ORDER_SAVE'</b>.
   We want to pass Sales Org. unit as '1101' ,but not getting updated in CRMD_ORDER tcode after SO gets created suxusfully.But Distribution Channel and Division are getting updated.
   But we are able to get the same if we give Sales Org. unit value as 'O 50000026',
and not by giving '1101'.
   Also we need this R/3 Sales Org. unit value dynamically using SELECT statement also.
   Pls let me know if anybody is aware of a solution for this..

Hi Nagesh,
Thanks for your reply.
If we pass R/3
wa_orgman-sales_org     = '1101'
wa_orgman-sales_office = '1101',
wa_orgman-sales_group = '105' ,
wa_orgman-dis_channel   = '01'.
wa_orgman-division      = '11'.
in the function module ,   sales order is getting created with errors saying Organizational Unit does not exist.
But If we give ,
wa_orgman-sales_org     = 'O 50000026'.
wa_orgman-sales_office = 'O 50000075'.
wa_orgman-sales_group = 'O 50000080'.
wa_orgman-dis_channel   = '01'.
wa_orgman-division      = '11'.
we could able to create order without errors.
For R/3 sales org ,the corresponding CRM sales unit is 'O 50000026'.
We want to pass R/3 sales org values instead of CRM sales values.
And this R/3 sales org values have to be selected dynamically from a table.
Pls help us to solve this issue.
Regards,
Siva

CRM sales order line item change with ECATT

Hi All,
We have just started to use ECATT's and have a scenario where in a CRM sales order certain line item data needs to be updated as part of the test.
The problem we have is in the selection of the line item. The filter option based on the line item column appears to be the best approach, and then double click on the item which is displayed to get to the item tabs.
When the parameters are being set everything is available and can be defined - when run however failure occurs at the filter stage.
Anyone got any ideas?
Al

Hi Alan,
Which mode of recording you are using, TCD or SAPGUI ?
And could you let me know the error, that you get.
Regards,
Sandipan

Any case study on using ERP sales order vs CRM Sales order in IC WEB UI

Hi All,
Currently we have a requirement where in agent uses ERP Sales order functionality in IC WEB UI for creating sales order. Incase of any incompleteness in order or any pricing error an activity should get created and should get assinged to Back office guy(CRM User).
My approach is as follows, we will call a custom FM in CRM from the user exit associated with Sales order transaction, This logic gets executed on save of ERP sales order.This custom FM will create an activity in CRM and assing it to back office guy. Other approach is to use the IDOC linked to the VAO1 transaction which inturns calls the custom fm.
Can you please suggest if you have any better approach to this.
Recently we came to know that ERP Sales order has got limited functionalities. If some one has a case study doc on ERP Sales order vs CRM sales order pls give me the ref link.
Thanks,
udaya

Hi Udaya,
Calling a Customer Specific R/3 Transaciton was quite easy in CRM 4.0 / 5.0 in the PC-UI Framework using Object Links. You can do that all by customizing and creating a custom method for a BOR Object in Transaction SWO1.
I think I've used CRM_ORDER_MAINTAIN to update the Document Flow. The subsequent activities where created by BAPI_ACTIVITYCRM_CREATEMULTI. I've wrapped all that standard functions in a RFC enabled function module.
It would be possible to provide also a link in the E-Mail to the Manager but the client is using a Citrix environment to provide access to the Portal. But Outlook runs locally. So we decided to use the standard Portal iView to display the Alerts. When you fill the Alert Container with the elements OBJKEY_GUID, OBJKEY_BOR_OBJECT_TYPE, OBJKEY_CRM_OBJECT_TYPE, OBJKEY_METHOD and OBJKEY_LOGICAL_SYSTEM using the Function Module SWC_ELEMENT_SET that provides a direct link to the specific document too.
Best regards
Gregor

CRM Sales Order to SAP ECC troubleshooting

Hi,
I'm trying to replicate SAP CRM Sales order to SAP ECC, I have matched (transaction and document type, item categories). But when I create sales order in CRM, the following error occurs in the Web UI:
Transmission log
SALES_HEADER_IN has been processed successfully (Notification S V4 233)
The sales document is not yet complete: Edit data (Notification W V1 555)
Unknown object type 'BUS2032' (Notification E RL 303)
SALES_ITEM_IN has been processed successfully (Notification S V4 233)
Please note that the BDOC messages state in the middleware is processed and everything looks fine in SMW01. The customer and product are already replicated from the ERP
Is there a more user friendly method to debug the error and to know the exact error.
Thanks In Advance,
Ahmed

Hi Ahmed, ,
It seems that the CSA bdoc is green (the internal CRM one) but the second , the replication one, is not created
due to this error.
Here a few advises:
Fistly create the same document directly in ECC. You might already get the same incompletion log as well in ECC and the reason should be quite obvious then.
Check as well in ECC in t-code SE91 as in which program error RL 303 is used. You might have customized code in ECC.
If this is not helping please use as well report CRM_ODE_CHECK_CFG to fing out if there some missing settings in the
BTX interface. See as well note 490932 (it is an old note but the settings mentioned are still relevant for highr releases).
Good luck with it.
Best regards
Christophe

Credit Card number entered CRM sales order is not appearing in R3 Sales ord

Hi,
We are entering our Sales orders in CRM which are gtting replicated to SAP R3,In the credit card scenario ,In some sales orders entered in CRM,where the Credit card numer has been entered,In some cases,the card numer is not appearing in R3 Sales order either in the overview screen or Payment card tab,due to ehich most of the times these cards fail authorization .
Kindly let me know as to what could be the reasons as to why the card numer seen in CRM is not appearing in SAP R3,sales order?
Appreciate your help on this.
Regards
Mohammed Roshan

Hi All,
Looking forward to your valuable inputs on this as to how and why Credit Card number entered CRM sales order iwould not appear in R3 Sales order?
Regards
Mohammed Roshan

How to add a table layout in CRM Sales order?

dear all ,
anyone know how to add a table layout in CRM sales order customer tab that using the EEWB added?
can EEWB do this? i didn't find the appropriate business object......

Hi , Swapna
is you mail address right? can not send out.
first , you should have added one field using EEWB , then to EEWB , find the extension , double click on the task, there you will find a "object list" on the right, the list will give you many many very important information , you should look through .
then double click on the "screen: ..........EEW......." , layout , there you will find the field you have added in . and you can draw anything you want there , then back to the screen flow , write you flow logic in PBO and PAI .
about the global data definition, again to the "object list", you will find a "Report source code: ......................TOP". in there ,you can define all you data .
another thing if you want to save your input field to database tables that you draw (not by EEWB added)
two ways:
1. write update table directly in PAI module .
2. you can use this BADI : ORDER_SAVE , this is when you save the order to trigger the save action.

Error while processing sales order as factory calendar missing.

"factory calendar missing or error in factory calendar".iam getting this error while processing sales order even though i have assigned it to shipping point and plant and sales org.

Hi Malik, How are you? I'm sorry to trouble you,
Let me introduce, I'm Daniel, and I saw your fantastic asnwer in
the topic "How to update Factory Calendar in SRM", and might I have the same
problem. It's with the "factory calendar".
In transaction va02 when I choose a Delivery Date, and I sent it to process, as
a result in the "shipping tab" it calculated to the first item one date, and to
the rest one date different. I don't know What it happen?
I debugged the program and I saw that to the first item use to calculate the
date is the function 'APO_SCHEDULING', and to the rest item use
'SD_SCHEDULING', and until here I come.
How can I do to what the dates calculated are the same? or What would be the
problem?
I need the dates calculated are equal.
I looked at it's using two "factory calendar" which are "J4" and "C2". Is this
correct?
Thanks In Advance,
My best regards,

Error while create sales order

Hi,
Please help.
I am facing error while create sales order.
No item category available (Table T184 OR VERP )
Message no. V1320
Diagnosis
No item category could be determined for the combination OR VERP .
System Response
The system does not allow further processing of this item.
Procedure
Check the entries in table T184 by means of which item category determination is controlled.
If you do not have the authorization to do this yourself, contact your system administrator.

Hi,
Check in spro whether Item categorygroup VERP is assigned to sales document type.if not assign.
Path
SPRO-SD-sales-sales douments-sales document item-assign item categories.

Commit error while transferring Sales order Document to GTS

Hello,
We faced a transfer error while transferring sales order document to GTS.
When I debugged the code function /SAPSLL/API_6800_SYNCH is called. In this function, /SAPSLL/CUHD_MAINTAIN_SINGLE is called with parameter lv_no_commit = 'X'. When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.) In debug mode I set the value of lv_no_commit to space, and then it works. It creates the GTS document.
We are also transferring billing documents and it works fine. When I checked what is the difference between transferring sales order document and transferring Billing document, I saw that in the transferring billing document there is another function is called /SAPSLL/API_6800_CSD_SYNCH, and it's calling parameters(in background, as seperate unit) are different from calling parameters of /SAPSLL/API_6800_SYNCH. You can see the difference below.
For sales document transfer :
    CALL FUNCTION '/SAPSLL/API_6800_SYNCH'
      DESTINATION cs_transfer-rfc_dest
For billing document transfer :
    CALL FUNCTION '/SAPSLL/API_6800_CSD_SYNCH'
      IN BACKGROUND TASK
      DESTINATION cs_transfer-rfc_dest
      AS SEPARATE UNIT
So my question is, do you think is it a sap standard program error, or is there any suitable settings in the customizing or SM59 to fix this error?
Thanks in advance
Serhat
Edited by: Serhat Dirihan on Jan 22, 2009 11:46 AM

Dear Serhat,
I don't think this is an RFC problem or an error. But you wrote:
When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.)
It is impossible to have GTS and R/3 on the same system and same client. At least the client should be different. So try to check why the call is performed like that.
Balazs

How to determine the delivery plant in a CRM Sales Order

Hi experts:
In CRM how to work the delivery plant determination? and I can change the Plan in a Sales Order before its download to ECC?
I download the DNL_PLANT object but i don't understand what is the functionality of these are created like business partner in CRM.
Thanks in advanced by your orientation about these questions that have me a little bit confuse.
Sussie

Hi Reddy
Thanks for your reply, but the note says that only applies for India or Brazil legal purposes.
In my case I still have confuse, in a normal Sales scenario CRM to R/3 how to works the determination of the delivery plant.
I know that in R/3 is determined by:
1. Customer-Material info record (Sales Area data)
2. Customer Master data (Sales area data)
3. Material Master data (Sales-area data)
I can think that in CRM is determinate bye Material Master Data, but I still don't know if I can change
it?? and where in the crm sales order before it is download to R/3??
Thanks
Sussie

PO Creation after CRM Sales Order Creation

I am creating a CRM Sales Order and the moment I save the CRM Sales Order,
it creates a PO in ECC. I need to find out how PO is getting triggered?
When I open the CRM Sales Order it shows a PO already created for this Sales Order.
Has anyone face this or same kind of scenerio ever? If yes please let me know how can fnd the triggering point of PO creation.
Thanks in advance!!
Sachin

Hi Mathivana,
I had faced these issue several time. As per SAP standard logic whenever you saved order in CRM it replicate immediatly in ERP till that time the order will be locked for any further change in CRM to save transaction data intigrity. The lock gets removed once the CSA queue(notification) from ERP update in CRM than unlocked.
You check the in SMW01 transaction and perform search with order number you will find Bdocs are in Intermediate stage(I can't tell reason as it can be so many reason why Bdocs get stuck) -Select and activate the Bdocs once again if you are lucky and it activated your order till be unlocked.
Or else user report most common for this issue "CRM_CHECK_DISTRIBUTION_STATUS" pass order number number and document type to unlock distribution than you will be able to change order.
100 % sure shot answer. Appriciate if points alloted
Thanks,
prem

MATERIAL GROUP IN CRM SALES ORDER

Hi
I have download ECC 5.0 Material Group in CRM 5.0.
I can see it in CRM in Product Master as category id, but it is not showing up in CRM Sales Order.
Any help on this...
Thanks
Nitin

Hi Venkat
I have already assigned material group to Ordered Products but not it getting displayed. I am in need of Field Name & Data Element of material group so I can make entries in missing pricing field catalog.
Thanks
Nitin

Error in CRM sales order

Similar Messages

Maybe you are looking for