Error in crystal report XI release 2 in Vista OS

Post Author: cormalado
CA Forum: General
Hi All,
I am a Newbie.......
I have written an application where it displays the report.
I have two test machines, "Machine 1" in which crystal reports XI release 2 is installed and "Machine 2" where it is not installed.
Now when I run the application in the machine where CR11 is installed,it runs perfectly fine.(It has XP Operating System)
Inorder to make the application run on machine 2 where CR11 is not installed.(It has Vista Operating System) what should i do. (I don't want to install CR11 there.)
Now in order to run in the Vista machine, I need to register the DLL's which are made used to run and display the report as in Machine 1.
I got these DLL's from machine 1 where XP is installed which i felt are necessary to display the report.....correct me if I am missing something.
craxdrt.dllcrdb_ado.dllcrqe.dllcrtslv.dllcrviewer.dllcrxf_rtf.dllExportModeller.dllquerybuilder.dllu2ddisk.dllu2ftext.dllufmanager.dll
Now how should i register these.....i tries Regsvr32.exe to register, but was able to register only few and rest were displaying an error as
"LoadLibrary failed "    or    "Entrypoint not found".
I think there might be some dependencies for the DLL's mentioned above.
I got the above mentioned list of DLL's from CR9 since these DLL's were made used in CR9 with some different name, when i ran the application in Vista machine with these DLL's I was able to run without any problems.
Now my question is:
Are these the only DLL's which are made used to display the report in Machine 2 where Vista is installed and if not what are the other dll's.
And where shoud these be residing (Is it in system32 folder or ..\Program Files\Common Files\..... ?) and how should I register these DLL's ? (i.e the order of registering them.)
Any sugesstion would greatly be accepted.   Kindly help me.

Post Author: synapsevampire
CA Forum: General
Try psoting technical information.
You wrote an application, but you won't bother to say what language/environment??? Your first application, or first time you've asked for technical support?
And what edition of CR XI do you have, and is it CR XI SR2?
The Developer edition is required for what you are asking, and you can check the help file within for the file dependencies.
Might be a compatability issue, I think SR2 is required.
-k

Similar Messages

Crystal Reports XI Release 2: Error message when trying to install

I am unable to install Crystal Reports XI Release 2 onto my computer. After putting CD1 into my computer and clicking install, I get the following error message:
"Error applying transforms. Verify that the specified transform paths are valid."
A couple members of my companies' I.T. department tried to help, but the error message was foreign to them. Tthey even built me a new hard drive, but unfortunately it gave me the same error message.
I am able to install Crystal Reports XI without a problem, but for some reason, Crystal Reports Release 2 will not install.
Any help you can provide in this matter would be greatly appreciated.

1.Are you able to neglect the installation window completely.
Like,can you just open your drive which accepts the cd and copy all the files from the win32 folder to another folder say "test".
2. If not on this machine, could you please try this on some other machine.
3.Otherwise you can download it from the following URL:
http://resources.businessobjects.com/support/additional_downloads/servic
e_packs/crystal_reports_en.asp#CRXIR2
Please select the "Service Pack 2 - Full build - ZIP - 1.03 GB -released April 2007" hyperlink.
Let me know if this helps
Thanks

Upgrading Crystal Reports XI Release 2 to CR 2008: Where is ReportDocument

I am attempting to upgrade our .NET Crystal Reports code from Crystal Reports XI Release 2 on Visual Studio 2005 SP1 to Crystal Reports 2008 on the same compiler. We use the ReportDocument interface and I can't seem to find it in the new Crystal Reports 4.0 managed directory. Here's the top of the .header file that worked in the old environment:
#using <CrystalDecisions.Shared.dll>
#using <CrystalDecisions.CrystalReports.Engine.dll>
#using <CrystalDecisions.Enterprise.InfoStore.dll>
using namespace CrystalDecisions::Shared;
using namespace CrystalDecisions::CrystalReports::Engine;
With that code in place, I get compiler errors indicating that the packages can't be found:
c:\dev\sources\videoview_6_6\video\nextlink\reportfaxservice\NReportFaxServiceImpl.h(13) : fatal error C1107: could not find assembly 'CrystalDecisions.Shared.dll': please specify the assembly search path using /AI or by setting the LIBPATH
environment variable
If I comment out the lines as follows and add in the ReportDefModel (the only dll that appears to have a ReportDocument symbol):
// #using <CrystalDecisions.Shared.dll>
// #using <CrystalDecisions.CrystalReports.Engine.dll>
#using <CrystalDecisions.Enterprise.InfoStore.dll>
#using <CrystalDecisions.ReportAppServer.ReportDefModel.dll>
// using namespace CrystalDecisions::Shared;
// using namespace CrystalDecisions::CrystalReports::Engine;
using namespace CrystalDecisions::ReportAppServer::ReportDefModel;
Then, I get compiler errors like this:
NReportFaxServiceImpl.cpp(306) : error C2039: 'Close' : is not a member of 'CrystalDecisions::ReportAppServer::ReportDefModel::ReportDocument'
 c:\dev\businessobjects\common\4.0\managed\crystaldecisions.reportappserver.reportdefmodel.dll : see declaration of 'CrystalDecisions::ReportAppServer::ReportDefModel::ReportDocument'
NReportFaxServiceImpl.cpp(941) : error C2039: 'Load' : is not a member of 'CrystalDecisions::ReportAppServer::ReportDefModel::ReportDocument'
 c:\dev\businessobjects\common\4.0\managed\crystaldecisions.reportappserver.reportdefmodel.dll : see declaration of 'CrystalDecisions::ReportAppServer::ReportDefModel::ReportDocument'
NReportFaxServiceImpl.cpp(950) : error C2039: 'SetParameterValue' : is not a member of 'CrystalDecisions::ReportAppServer::ReportDefModel::ReportDocument'
 c:\dev\businessobjects\common\4.0\managed\crystaldecisions.reportappserver.reportdefmodel.dll : see declaration of 'CrystalDecisions::ReportAppServer::ReportDefModel::ReportDocument'
NReportFaxServiceImpl.cpp(974) : error C2039: 'ExportToDisk' : is not a member of 'CrystalDecisions::ReportAppServer::ReportDefModel::ReportDocument'
 c:\dev\businessobjects\common\4.0\managed\crystaldecisions.reportappserver.reportdefmodel.dll : see declaration of 'CrystalDecisions::ReportAppServer::ReportDefModel::ReportDocument'
Here's line 306 of that source file, for example:
NReportFaxServiceImpl::~NReportFaxServiceImpl()
 DESTLOG( LOG_NREPORTSERVER, "NReportFaxServiceImpl::~NReportFaxServiceImpl", "[[[]]]" );
 RFaxCloseServerHandle( _hRightFaxServer );
 // close all the report documents
 IDictionaryEnumerator^ enumReportDocuments = _mapReportDocuments->GetEnumerator();
 while( enumReportDocuments->MoveNext() )
 Object^ reportName = enumReportDocuments->Key;
 ReportDocument^ crReportDocument = dynamic_cast<ReportDocument^>(enumReportDocuments->Value);
/* line 306 */ crReportDocument->Close();
Can anyone advise me of the correct #using directive to specify to pull in the ReportDocument object?
Thanks.

Okay, we seem to be getting somewhere. I switched the /AI directive to point to the managed/dotnet2 directory, but then I get the following warning:
c:\dev\sources\videoview_6_6\video\nextlink\reportfaxservice\NReportFaxServiceImpl.h(15) : fatal error C1107: could not find assembly 'CrystalDecisions.Enterprise.InfoStore.dll': please specify the assembly search path using /AI or by setting the LIBPATH environment variable
NMAKE : fatal error U1077: 'c:\dev\VisualStudio\VC\bin\cl.EXE' : return code '0x2'
So, I commented out the following line in the header:
#using <CrystalDecisions.Enterprise.InfoStore.dll>
Then, I get the following error when I try to make the project:
NReportFaxServiceImpl.cpp(982) : error C3624: 'System::Drawing::Printing::PrinterSettings': use of this type requires a reference to assembly 'System.Drawing'
NMAKE : fatal error U1077: 'c:\dev\VisualStudio\VC\bin\cl.EXE' : return code '0x2'
Here is line 982:
 crReportDocument->PrintToPrinter(1, false, 0, 0);
So, I'm assuming that maybe I need to provide an assembly search path to both the managed and the managed/dotnet2 directories. Is that correct? If so, is order dependent between those two /AI directives.
Thanks.

How to use Crystal Reports XI release 2 Preview with Lotus Notes Scripts ?

 Hi all, How to use Crystal Reports XI release 2 Preview with Lotus Notes 7 Scripts ? Thank's 

Hi,
we are using Lotus Notes and Crystal Reports for preview and printing reports from our Lotus Notes Applications. We use the RDC object model. For previewing the reports we export them in an pdf-file and then start the PDF Reader to show the Preview. This works fine.
But with Crystal Reports > 11 the RDC Object Model is no longer supportet, so we look for another way to preview and print our reports.
I try to preview a report build with crystal report XI release 2 in my thick client (Lotus Notes) using java reporting component JRC, this report uses an native xml file as datasource. If the datasource is saved with the report everything works fine, but otherwise I have the following error:
JRCAgent1 detected an exception: javax.xml.namespace.QName: method getPrefix()Ljava/lang/String; not found
I also tried the .jars from Crystal4Eclipse. Doesn't work. When I use Eclipse to view the report everything works fine. The class QName exitsts in the jaxrpc.jar and in the xbean.jar, but only in the xbean.jar a Methode getPrefix exists.
This is what we tried:
Works fine with RDC. Doesn't work with JRC until now.
Did this help you ?
Perhaps you con help me with the JRC, because I'm a java newbee so any ideas could be helpful.
Oliver
<a href="http://www.cominform.de">www.cominform.de</a>

Crystal Report Xi Release 2 upgrade

I have been tryig to upgrade my Crystal reports XI Release 2 with the latest service paks, but when i try to apply any they say that i need at least service pak 2. I try to install service pak 2 and it tells me that there. Another version of this product is already installed. To configure or remove the existing version of this product, use add/remove on the control panel.
In the Addd/remove on the control panel there is a Crystal Reports XI Release 2. Im confused.. this is waht i want to upgrade why woudl i remove it? The version that is installed is 11.5.0.31327
This all started when i wanted to make a webapp displaya crstyal report and the follwoing error happend. The most popular fix seemed to be to upgarded to service pak 4 for crystal, but to get there i need service pak 2,3 but i cant install. The error i was receiving is listed below.
Not enough memory for operation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Not enough memory for operation.
Source Error:
Line 64:             //load the rpt file to document
Line 65:             //return;
Line 66:             doc.Load(fileName);
Line 67:             //pass the user inputs to crystal report parameters those will sit in the output pdf file
Line 68:             //doc.SetParameterValue("@CompanyName", txtCompany.Text.Trim());
Source File: C:\projects\Web Invoice\Web Invoice\Default.aspx.cs    Line: 66
Stack Trace:
[COMException (0x80041004): Not enough memory for operation.]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +95
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +271
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +333
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +988
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +84
   Web_Invoice._Default.Button2_Click(Object sender, EventArgs e) in C:\projects\Web Invoice\Web Invoice\Default.aspx.cs:66
   System.Web.UI.WebControls.Button.OnClick(EventArgs e) +111
   System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +110
   System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +10
   System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +13
   System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +36
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1565

I believe [this|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note will help.
Notes search page is here:
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_ossnotes&query=&adv=true
Ludek

Crystal Reports XI Release 2 SP4 RDC Merge Module

I've been trying to find the RDC Merge module for Crystal Reports XI Release 2 SP4 and cannot find it. I found a link - https://smpdl.sap-ag.de/~sapidp/012002523100009381702008E/crxir2sp4_rdc_mm.zip - but when I navigate there I get an error "Error Message - ObjectID not existant". Does anyone know where I can get this from?

I couldnt find the SP4 RDC however there is a crxir2_fp55_rdc_mm.zip released on 06/07/2009, which can be found at
[https://smpdl.sap-ag.de/~sapidp/012002523100008181452009E/crxir2_fp55_rdc_mm.zip]

Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report

When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
Error in Crystal Report: Failed to export the report.
This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter). We have other subreports (within this same report) that print a sql image just fine. But, when this subreport prints, the above error appears.
I can run the same report on an XP machine without error.
Exportmodeller.dll and crtsv.dll are both installed and registered to the
C:\Program Files\Common Files\Business Objects\3.0\bin folder
I have tried opening the report, removing the image, and then adding it back in again to the subreport.
Still receive the same error.
Any suggestions?

>
Don Williams wrote:
> RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
>
> Upgrade to the .NET components and post your question to the .NET forums.
>
> Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
Don,
Can you please clarify?
Our VB6 app that uses Crystal XI RDC runtime components. Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer). We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
We can print/preview/export to excel, but the pdf creation is failing with this error.
We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue). Therefore, we have to rollback our .NET product and revert to the RDC code.
Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
When you say "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
Thank you

How to get actual error from Crystal Report

We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
Xception E NSF NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in Advance

Same as
crystal report unexpected error in Web service (IIS)
Closing this thread.
Ludek

Crystal Reports XI to Crystal Reports XI Release 2

Is there an SR update to go from Crystal Reports XI to Release 2? Or is it essentially a whole other version of the software and must be purchased seperately?
Can Crystal Reports XI Release 2, save files back to Crystal Reports XI version?
I'm supporting two applications that utilize Crystal Reports as its reporting engine. Problem is that one uses Crystal Reports XI and the other Release 2.

Hi Wenin,
We can upgrade from Crystal XI to Crystal XI R2.
We need to have the set up or download of Cr Xi R2 enter the key and run the Cr Xi r2 application.
If we have requirement to run multiple applications one single machine then we can install.
Else it is recommended to have one version of crystal on client machine.
Bcoz both versions will have same registry keys and .dll files .
So, be aware and can run the 2 crystal applications easily.
Thanks,
Naveen.

Multi Value Parameter in SP error in Crystal Report SAP B1 ?

Hi Experts ,
i am Getting an error in Crystal Report
"Failed to retrieve data from the database. Details: 42000:[Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near '('. [Database vendor code: 120]"
I an executing the SP In Command , I want to pass multi value parameter in SP
When Pressing ok
than On Ok Button Error come
So I have Some Question
1> Why All parameter in Commend Are Automatic getting Compulsory and How to Avoid It?
2> How to Solve this error ? this error is only coming with multivalued parameter ?
i have many report in which i have to send the multi value parameter into query it self so , Plz Help Me
I am New to Crystal Report so it will be Kind Of you if explain with example .
Thankks in Advance !!!
Regards,
Mayank Shah

Hi Shachar,
i will explain one because i think some thing is misunderstood
please the images
when all parameter record selected and no parameter record selected ... i want all record should display
this blank report is problem
Regards,
Mayank Shah

Export To PDF in CRYSTAL REPORT XI Release 2

I am using Crystal report XI release 2.
Font Size is decreasing when I am exporting Crystal Report to PDF.
It was working fine previously but i don't know what messed it up. Please help.

Hi,
Looks like you already read the steps needed to resolve this from other places. Here it is again incase you miss any part, make sure you follow it exactly.
Set the resolution of the default printer of the local computer experiencing the issue to 1200 DPI. Most printers have a default setting of 600 DPI.
Create two registry keys to prevent the crxf_pdf.dll from decreasing in font size.
Click Start > Run. Type "regedit". The Registry Editor appears.
Create the following keys for Crystal Reports XI Release 2 with the defined values:
HKEY_CURRENT_USER\Software\Business Objects\Suite 11.5\Crystal Reports\Export\PDF\ForceLargerFonts
Type: DWORD
Recognized Values: 0,1
Default Value: 1
Creation Method: manual
HKEY_LOCAL_MACHINE\Software\Business Objects\Suite 11.5\Crystal Reports\Export\PDF\ForceLargerFonts
Type: DWORD
Recognized Values: 0,1
Default Value: 1
Creation Method: manual
Set both registry key values to 1 to turn them on.
Restart the Crystal Reports Page, Job and Cache Servers
Also help if you upgrade your Adobe Reder to version 8 or higher. Let me know if it helps.
Regards,
Ken

Error deploying Crystal Report XI R2 to Enterprise - Failed to read paramet

Error deploying Crystal Report XI R2 to Enterprise - Failed to read parameter object.
I know this issue has been addressed several times and the solution recommended was to install Service Pack 2. I have done that. It started working for me too; however recently I got some error saying some UDF***.DLL is missing. I re-installed Crystal Reports XI R2 and Service Pack 2. Unfortunately though, this error is back. I have restarted the machine n number of times but keep on getting this error.
My report file has dynamic parameters defined through command object (SQL Query). My understanding is that once I publish the report to BoE Enterprise, BO will create LOVs and BV's in the repository. Now that is not happening.
has any one else had this issue before and resolved it?
Thanks

Hi,
do you export your CR report in your BOBJ repository using an account with administrator rights?
Regards,
Stratos

Crystal reports XI Release 2 constantly configuring after SP4 installed

I had this issue before and bookmarked it before SAP bought businessobjects and now that solution forum thread no longer exists. But there is some problem with updating the registry when installing sp2 or Sp4 on Crystal Reports XI 2.
After the successfull install of SP4 upon restarting the application I receive the following messages:
"Please wait while windows configures Crystal Reports XI Release 2"
"Server Busy... switch... Retry"
Every time I start Crystal Reports I have to clear these annoying messages before I can use the application. Does anyone on this forum recall how to fix this nagging issue? I recall there is some registry hack to perform that remedies this issue but I don't remember the specifics. Thanks!!!

not sure if any one tried this, but it worked for me with Xi/R2, SP5 on a Win2003 std server.
the event log showed the following:
'HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\Keycodes\CR Ent\Serial' does not exist.
the entire "CR Ent" key was missing. after adding this key and string value "Serial", I entered my registration code. the configurng process did run one more time but very quickly this time.
the next time I launched Xi it did ask me again for my registration number, but since this point the application starts up just fine.
hope this helps someone else.

Error with crystal report using SAP GUI

Hi,
While using crystal report in sap gui i get the following error. I already googled and only found one thing on this forum that talks about this and it was never solve. Can you please help me? Thank you
Errors in Crystal Reports Installation(SupportsSAPQuery)
Message no.ALVHT218
Diagnosis:
This function requires that Seagate Crystal Reports and the Functional Area drivers(InfosetDrivers) from Seagate software are installed.
This sotware is either not available on your frontend or has been installed with errors
System Response:
The action has been terminated
Once again
thank you

Hi
Please check if you have installed all the SAP transports which are required for Crystal Reports to run based off SAP.
Regards
Sourashree

Integrate Crystal Reports XI Release 2 and VS2005 IDE

Hi,How can i integrate Crystal Reports XI R2 is directly into the Visual Studio 2005 development environments. So i can host my report in either a Web or Windows application with one of the Crystal Reports viewer controls, or use the extensive API to interact with the report programmatically at runtime. My current setup is:<blockquote>Crystal Reports XI Release 2.</blockquote><blockquote>Visual Studio 2005 Professional (I did not install the Crystal Reports .Net shipped with VS 2005.)SQ Server 2000. </blockquote>Thanks Please help.

You'll need to install the Crystal .NET that comes with VS 2005.Â You then install Crystal XI R2 over the top and not only will Crystal be integrated with the IDE, it should use the updated assemblies from R2.
-Dell
- A computer only does what you told it to, not what you thought you told it to!

Error in crystal report XI release 2 in Vista OS

Similar Messages

Maybe you are looking for