Error in CS5 when rendering from a CS4 project.

Hey guys,
So I recently upgraded to a 64 bit machine with CS5 on it after using After Effects CS4 on my old 32 bit computer. When I open these projects and try to render them on my new machine, I get an error message that I haven't ever seen before.
It says:
"After Effects: This project was unable to import the settings of some output modules. Those modules have been reset to their defaults."
When I select "OK", the dialog box just keeps reappearing.
Any ideas?

You have incompatible output modules on your render queue because a lot of stuff has been changed for CS5. This affects pretty much all MPEG ones, WMV, Quicktime... Simply delete them and reassign the comps to the RQ with the new settings.
Mylenium

Similar Messages

  • Can you have a PDF fit on the viewer's screen automatically when exporting from InDesign CS4?

    Can you have a PDF fit on the viewer's screen automatically when exporting from InDesign CS4?

    If you were to upgrade to InDesign CS5 or CS5.5 and if you exported as Adobe PDF (Interactive), you could set the View settings for Page Layout and Zoom.
    While, as Jongware points out, its possible for individual users to override that option (Preferences > Page Display > Default Layout and Zoom), the number who will actually do that is actually very tiny.

  • CS5 Error 23 :: 46 when rendering

    Using AE CS5 I get this error whenever I try to render: After Effects error: Could not convert Unicode characters. (23 :: 46)
    I searched online and found this solution to the same error code for CS3 and CS4, but I tried it and it didn't work, I'm still getting the same error message.
    This happened with the other project I tried to export (which had some Chinese and English in it), but this project didn't have any characters at all in it, the only text is hard-rendered already from an export from Premiere Pro (which doesn't seem to have any problems with text).
    What the heck is causing this? I'm running it on a MacBook Pro, 10.5, with English-US and two Chinese simplified languages as my inputs, but English US is the first one on the list. Anyway, the AMT folder has the en-us and zh-cn files, so I assume it's not an issue with that.
    Does anyone know of a fix for this? If I can't get it to stop doing that, AE is completely useless to me! Agh!
    (Perhaps it's obvious, but I should add, I don't have any language compatibility issues with any other CS5 programs, or at least not premiere and photoshop, which I've already used, nor any other "creative" type programs I've ever used on this computer.)

    Have you updated your AE to the 10.0.1 upgrade? It should fix most of these issues. Otherwise look for mixed naming in your source assets, file and folder names. The same problem as explained in the KB articel may occur, if your folders use glyphs that are in an unsupported range. Raniming offending items may solve the problem. Also check your meta data. You may have comments in Chinese or whatever there that also could throw things off. Letting AE ignore the source meta data or manualyl stripping it might help. If it still doesn't, I'm sure the engineers would appreciate having a look at your project, so a short mail to [email protected] with the project attached might provide some clues.
    Mylenium

  • I have error 6 message when trying to open cs4

    When i open my cs4 i have an error 6 message.  I have been using this for 4 years with no problem and now it shows me this!  This is so frustrating! 

    Try these help pages:
    http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
    or
    Error "Licensing has stopped working" | Mac OS

  • Error code 50 when copying from TC to external HDD

    Hi all, I bought a 3tb TC and backed up about 1.3tb worth of data onto it from an external HDD, I then formatted the external HDD to FAT 32 as I found out that TC does not like to work with FAT 32, no matter, the hard drive ois fixed now. However, when I go to copy all the data back onto the external HDD. i get "an unnexcpected error occured error code -50" or something like that, but the error code is definetly 50. I got this error when trying to copy the movies through, they are MKV files, I checked all the names and I dont think there are any problems with them.
    the setup so far is as follows. Externall HDD --USB--> Time capsule.    All operations are being executed through an imac.
    HELP ASAP will be greatly appreciated.
    Cheers

    Error codes are really hard to figure out.. but i think it will be due to permissions.
    See http://pondini.org/TM/C10.html
    It is an error from TM but I think it comes from underlying OS..
    Can you copy files to this disk from a source other than the TC.. try copying a file from the TC to the Mac and then from Mac to the external disk.. but make sure it is plugged directly into the mac.. if you have issues look carefully at permission. And format/partition type.. do use GUID partition not MBR Or the older Apple systems.
    Re: Error Code-50 when trying to copy or delete files on external hard drive

  • Timewarp effect not applied when rendered from Media encoder CC

    The timewarp effect (enabled using console veiw in PPRO CC) does nothing to footage when rendered through Media encoder...
    It does however render when not sending it to the queue, and rendering straight from PPRO.

    Fair enough,
    Just hoping to raise attention of this...as I believe this should be a normal supported feature of PP as it once was back in CS3 days.....
    Normal frame blending interpolation doesn't really cut it, and round tripping to AE is overkill for something already built into PPro....
    But at least it's in there in some form

  • Error ORA-03113 when upgrading from 11.2.0.1 to 11.2.0.3

    I keep on getting this error when upgrading from 11.2.0.1 to 11.2.0.3
    [Thread-57] [ 2012-04-20 13:18:28.207 CEST ] [SummarizableStep.genSummary:409]  Generating Summary for:=Pre Upgrade ,status is:=Successful
    [Thread-57] [ 2012-04-20 13:18:28.208 CEST ] [SummarizableStep.genSummary:409]  Generating Summary for:=Oracle Server ,status is:=Failed
    oracle.sysman.assistants.util.step.StepExecutionException: ORA-03113: end-of-file on communication channel
    Upgrade failed due to running the step "Upgrading Oracle Server"
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeSubStepImpl(SubComponent.java:738)
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeStepImpl(SubComponent.java:585)
            at oracle.sysman.assistants.dbma.backend.component.Component.executeStepImpl(Component.java:317)
            at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:183)
            at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
            at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
            at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2708)
            at java.lang.Thread.run(Thread.java:637)
    [Thread-57] [ 2012-04-20 13:18:28.209 CEST ] [SummarizableStep.executeImpl:212]  Throwing exception e from SummarizableStep
    [Thread-57] [ 2012-04-20 13:18:28.209 CEST ] [BasicStep.configureSettings:304]  messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@4805e9f1
    oracle.sysman.assistants.util.step.StepExecutionException: ORA-03113: end-of-file on communication channel
    Upgrade failed due to running the step "Upgrading Oracle Server"
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeSubStepImpl(SubComponent.java:738)
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeStepImpl(SubComponent.java:585)
            at oracle.sysman.assistants.dbma.backend.component.Component.executeStepImpl(Component.java:317)
            at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:183)
            at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
            at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
            at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2708)
            at java.lang.Thread.run(Thread.java:637)
    [Thread-57] [ 2012-04-20 13:18:31.000 CEST ] [CompManager.isModeSet:9822]   DB Upgrade Mode Setting := 1
    [Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [CompManager.isModeSet:9823]   Mode := 1 is set
    [Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [SQLEngine.done:2189]  Done called
    [Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [Database.getStepSQLInterface:787]  OH in database: /app/oracle/product/11.2.0.3/db_1Any clues about what could be wrong? I am planning to upgrade with the manual steps if it does not work :(

    Pl post OS details - are you using DBUA to upgrade ? Are there any errors in the database alert log ?
    ORA-00600 [kodpunp-nulltds], ORA-00600 [kokeeiix1], [600] When Upgrading To 11GR2 [ID 1367827.1]     
    HTH
    Srini

  • Error Code (-50) when downloading from iTunes

    Im curious to know if anyone else has received this type of error message before?
    I have never had any problems downloading season pass stuff from iTunes so this is the first time I've ever seen this.  Ive double and triple checked all of my connections and everything is good.  Speed test came back strong and fast so Im wondering if this is more of an apple issue.

    May be this article can be of some help:
    http://support.apple.com/kb/TS3297
    "Error -50," "-5000," "8003," "8008," or "-42023"
    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while accessing iTunes Store:
    See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
 ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.

    Windows Vista:
 \Users\username\Music\iTunes\iTunes Media\Downloads\

    Windows 7:
 \Users\username\My Music\iTunes\iTunes Media\Downloads\


    Windows XP:
 \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
    After locating your iTunes Downloads folder:
    Quit iTunes.
    Delete the Downloads folder on your computer.
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    If you encounter this issue while while downloading Digital Copies using Windows:
    Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
    If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
    You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
    If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.

  • [SOLVED] Acpid prints an error on tty when switching from X

    First of I am using Openrc and eudev. I set up acpi and noticed that it prints error (posted below) to tty. It also shows the error when I press ctrl+alt+F10 even though tty number 10 is not spawned. Everything seems to work, it is just anoyin gand gets in a way. The same error is not shown in terminal emulator running X.
    The exact error:
    acpid: client 1302[0:100] has disconnected.
    I just noticed it prints this error every time I switch from X to tty. And it prints the error to that tty. So if I swithc 5 time to tty2 and 3 times to tty5, I'd see the mesage 5 times on tty2 and 3 times on tty3.
    EDIT:
    Dmesg:
    dmesg | pt acpi :(
    :120:[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    :121:[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    :122:[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    :123:[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    :124:[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    :254:[ 0.123472] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    :280:[ 0.189051] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    :281:[ 0.189128] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
    :282:[ 0.189198] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
    :408:[ 0.217413] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    Acpi handler.sh:
    #!/bin/bash
    # Default acpi script that takes an entry for all actions
    case "$1" in
    button/power)
    case "$2" in
    PBTN|PWRF)
    logger 'PowerButton pressed'
    poweroff # The only added line
    logger "ACPI action undefined: $2"
    esac
    button/sleep)
    case "$2" in
    SLPB|SBTN)
    logger 'SleepButton pressed'
    logger "ACPI action undefined: $2"
    esac
    ac_adapter)
    case "$2" in
    AC|ACAD|ADP0)
    case "$4" in
    00000000)
    logger 'AC unpluged'
    00000001)
    logger 'AC pluged'
    esac
    logger "ACPI action undefined: $2"
    esac
    battery)
    case "$2" in
    BAT0)
    case "$4" in
    00000000)
    logger 'Battery online'
    00000001)
    logger 'Battery offline'
    esac
    CPU0)
    *) logger "ACPI action undefined: $2" ;;
    esac
    button/lid)
    case "$3" in
    close)
    logger 'LID closed'
    open)
    logger 'LID opened'
    logger "ACPI action undefined: $3"
    esac
    logger "ACPI group/action undefined: $1 / $2"
    esac
    # vim:set ts=4 sw=4 ft=sh et:
    EDIT2:
    Workaround (far from ideal solution):
    X recognizes the powerbutton as XF86Poweroff, sosetting a bindkey for poweroff workswhile I'm in X. Could this way of doing things be more violent on shutdown compared to acpid's way of doing it? Are the same scripts run at shutdown in bot cases (those that show in openrc's shutdown run level)?
    Last edited by bstaletic (2014-11-07 19:59:44)

    Hi bstaletic,
    If I understand correctly, you are having some acpi errors (or do you mean acpid)..
    Here are the packages my side:
    $ pacman -Qs acpi
    local/acpi 1.7-1
    Client for battery, power, and thermal readings
    local/acpid 2.0.23-2
    A daemon for delivering ACPI power management events with netlink support
    local/acpid-openrc 20141107-1 (openrc openrc-desktop)
    OpenRC acpid init script
    I dont think I am having errors..
    $ dmesg | grep acpi
    (gives no output)
    I use a display manager (lxdm) to start X.
    Edit-
    $ rc-status
    Runlevel: default
    dbus [ started ]
    wicd [ started ]
    netmount [ started ]
    metalog [ started ]
    acpid [ started ]
    consolekit [ started ]
    cronie [ started ]
    alsasound [ started ]
    local [ started ]
    Dynamic Runlevel: hotplugged
    Dynamic Runlevel: needed
    xdm-setup [ started ]
    Dynamic Runlevel: manual
    Last edited by aaditya (2014-11-07 19:52:47)

  • Black borders problew when exporting from Premiere CS4

    Buenos dias, komrads! Just a few days ago I found rather trivial trouble exporting video from Pemiere CS4. Here they are:
    A. shvi531.mp4: https://www.youtube.com/watch?v=x3L5Lr6VZBE
    Export settings:
    640x360 - Source video, 640x360 - Output video
    Source Crop settings. Left:55; Top:0; Right: 56; Bottom:0. Aspect ratio: 16:9
    Format: H.264
    Tv Standard: NTSC
    Widescreen 16:9
    Profile: High
    Level: 4.2
    VBR: 1 pass
    Target Bitrate: 25
    Keyframe: 5
    Output export settings: Black borders.
    B. shvi531_2withoutBorders.mp4: https://www.youtube.com/watch?v=uImumNAHON8
    Export settings:
    640x360 - Source video, 640x360 - Output video
    Source Crop settings. Left:55; Top:0; Right: 56; Bottom:0. Aspect ratio: 16:9
    Format: H.264
    Tv Standard: NTSC
    Widescreen 16:9
    Profile: High
    Level: 4.2
    VBR: 1 pass
    Target Bitrate: 25
    Keyframe: 5
    >>Attention<< Here is the quesition: How can I get the quality of the first video (A. shvi531.mp4) but without borders. Than this video go straight to youtube.
    Sea God bless you, guys! 
    P.S. I searched up this forum, but didn`t find the troubleshoot.
    With love from Dominican Republic, Ilya.

    Maybe try starting project with the same exact dimensions etc of your source footage and then export the same settings ? It's kinda tricky sometimes due to frame ratios ( 4:3, 16:9 etc ) and specs for ntsc or pal etc.. but if you use desktop custom settings you might be able to do what you want ...for youtube...
    I didnt look at the samples you posted cause of my security settings.
    good luck !

  • Error while making an epub from InDesign CS4

    I'm trying to make an epub from a book pallette in InDesign CS4. I get this error message:
    Could not find required entry in archive: OEBPS/\QBones%20cover%2015%20ePub%202.xhtml|\
    so the document won't open in Stanza. Although it will in Adobe Digital Editions and in calibre.
    Any body get this error message? Am I clicking a wrong button somewhere, or is there something wrong with my file?
    I'm also having trouble getting the export settings right for the type, and still need to learn how to build the table of contents.
    with hope and thanks,
    Linda

    I am having the exact same problem.  When exporting a book from CS4 only the TOC and the first Chapter or section export correctly.  Inside the epub file everything seems configured correctly but all the chapter or sections after the first are xhtml files without any content, just the initial structure of an ordinary xhtml file.
    Anyone have any answers to this?  If we can't get the export from book option working it basically makes InDesign useless for Epubbing things.  Which makes me think this isn't a common problem or if it is there is a solution.
    Help!
    Oh, and I am using the ME edition of CS4 in case that matters, though I don't see that it should.

  • Error 150:30 when I start my CS4. What do I do?

    I reinstalled my old MacOS to get rid of Maverick. Now I can't use my CS4 programs. What do I do to be able to use my CS4 again?

    Hi Superfly,
    When you try to start an Adobe application on Mac OS, you receive the error, "Licensing for this product has stopped working."
    Perform the solutions below in the link .
    http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
    Important: Continue to the next solution only if a previous solution does not resolve the problem. After performing some of these solutions, you are required to re-enter licensing data or activate your product. Furthermore, tryout editions of Adobe software are sometimes prevented from starting.
    Same issue has been discussed in the below mentioned thread also.
    http://forums.adobe.com/message/4752665
    Let me know if it helps.
    Thanks!
    Eshant

  • "File Error: Unknown File" when rendering

    Hi,
    When attempting to render any clip I get a "File Error: Unknown File". Help?
    I'm using FCP 6.0.5 with video content from a Canon consumer HD camera.
    Thank you,
    Tim Moore

    switch the location of your render files and see if that helps. I had this happen week before last and it drove me crazy (crazier) I switched scratch disks and met deadline. Now it all behaves like it never happened. some bit stuck somewhere, that took the machine being off for a while to cure

  • SAP XI error: 401 Unauthorized (When calling from Enterprise Portal)

    Hello Friends
    I am trying to access an SAP table from IVIEW of portal via XI. Using the latest and greatest version of all SAP Components. (We just installed couple of weeks back).
    I keep getting the following error message when I try to access data from IVIEW of portal.  
    "SAP XI error: 401 Unauthorized"
    What may be the reason? If some one can help me, I would really appreciate it.
    Thanks
    Ram

    Thanks Srinivas for your help.
    I tried accessing the URL directly and got the error message
    "User Credentials not passed via Enterprise Portal. Please contact your Administrator"
    Any more suggestions?
    Thanks again
    Ram

  • General Error message when rendering after opening FCP4 project in FCP5

    Hi,
    we're are having trouble with our FCP 4.5 project after opeining it in FCP5. When trying to render it comes up with "General Error" message and won't render the sequence. It also sometimes simply stops rendering without the message. Can anyone help? thanks

    Update the version of FCP you're attempting to use as far as it will go for starters. There's no bug I know of that would cause this, so it's more likely an edgy media file getting in the way.
    Try rendering just a section at a time and see if you can narrow down the files that may be causing your error.
    Jerry

Maybe you are looking for