Error in CXD1 (EC-CS) during Validation Check

Dear Team,
While checking the Validation for Currency Translation Method QXCR in SAP, I am getting the below error message:
80: Item 0000510001 and item 0000900000 are not the same type
Message no. GZ218
Diagnosis
The item set contains both balance sheet and income statement items.
It should however contain either balance sheet OR income statement items.
System response
Error message
Procedure
Please correct the item set.
==============================================================================================
Further, under QXCR method entries, in sequence 80, under Maintain Sets I want to remove item 900000. When I go to change Set maintenance, the system gives me the below error for Set Name: 0-40R
Objects with leading zero may not be changed
Message no. GU302
Diagnosis
You have tried to change an object whose name starts with a zero. This is not possible because these objects are reserved for SAP (for instance, examples used in training courses).
System response
The changes have not been made.
Procedure
Make the changes to a copy of the object or create a new object.
Please assist on this...
Thanks in Advance !!!

Thanks Dan,
I went to CXSC Tcode and given the existing FS item 0-40R and chosen the change option, wherein I am getting the error as below:
Objects with leading zero may not be changed
Message no. GU302
Diagnosis
You have tried to change an object whose name starts with a zero. This is not possible because these objects are reserved for SAP (for instance, examples used in training courses).
System response
The changes have not been made.
Procedure
Make the changes to a copy of the object or create a new object.

Similar Messages

Error 2416 at CS4 install during "profile checking" which stops at 90%

Hello all,
I found hundreds of similar questions in the Internet, and none find any answer but reinstalling XP which is for me absolutely excluded.
I spent the whole week with Adobe Support which didn't help (all suggestions yielded no fix)
The situation is the following one:
I installed CS4 on a new system running XPP SP3. Install went ok.
I then installed W7 on a secondary disk, which didn't go through
I had to fight to fix my dual boot, then I finally reinstalled XPP (via the CD and the REPAIR feature). This removed my Photoshop product and all others by the way.
So, I reinstalled all my stuff, fine, until it was CS4 turn.
All attemps to install CS4 give a hang at 90% of the "Profile checking" phase.
The last lines of the log are never the same as far as the ERROR number is.
How come ???
This time, I have:
Property(S): ROOTDRIVE = C:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
=== Logging stopped: 17/06/2011 12:17:55 ===
1: 2 2: 0
1: 2 2: 1
Installation result: 0
[    2416] Fri Jun 17 12:17:55 2011 ERROR
Log of: object
isRunning {string}: 0
percentComplete {string}: 100
message {object}: [object Object]
Log of: object
    code {string}: 0
    args {object}: [object Object]
[    2416] Fri Jun 17 12:19:07 2011 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Adobe support suggested to :
create a new account
remove Google desktop
remove Adobe Flash Player
"purchase" PC Scan & repair to fix error exwhyzee
Close my rear window
give milk to the cat
say hello to my neighbour
and
run in circles five times around my dining room table
None of these attemps give any result.
Any other idea, anyone ?
Thanks.

Hello all,
I found hundreds of similar questions in the Internet, and none find any answer but reinstalling XP which is for me absolutely excluded.
I spent the whole week with Adobe Support which didn't help (all suggestions yielded no fix)
The situation is the following one:
I installed CS4 on a new system running XPP SP3. Install went ok.
I then installed W7 on a secondary disk, which didn't go through
I had to fight to fix my dual boot, then I finally reinstalled XPP (via the CD and the REPAIR feature). This removed my Photoshop product and all others by the way.
So, I reinstalled all my stuff, fine, until it was CS4 turn.
All attemps to install CS4 give a hang at 90% of the "Profile checking" phase.
The last lines of the log are never the same as far as the ERROR number is.
How come ???
This time, I have:
Property(S): ROOTDRIVE = C:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
=== Logging stopped: 17/06/2011 12:17:55 ===
1: 2 2: 0
1: 2 2: 1
Installation result: 0
[    2416] Fri Jun 17 12:17:55 2011 ERROR
Log of: object
isRunning {string}: 0
percentComplete {string}: 100
message {object}: [object Object]
Log of: object
    code {string}: 0
    args {object}: [object Object]
[    2416] Fri Jun 17 12:19:07 2011 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Adobe support suggested to :
create a new account
remove Google desktop
remove Adobe Flash Player
"purchase" PC Scan & repair to fix error exwhyzee
Close my rear window
give milk to the cat
say hello to my neighbour
and
run in circles five times around my dining room table
None of these attemps give any result.
Any other idea, anyone ?
Thanks.

Can not Update icloud for win7 Sheep error during transformation. check that the indicated transmitter propagating path is valid. tryet in appel updater and tryet downloading from apple but the same

Can not Update icloud for win7 Gets
Sheep error during transformation. check that the indicated transmitter propagating path is valid.
tryet in appel updater and tryet downloading from apple but the same

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

JSPM upgrade Error during validation of the dependencies of the selected ho

Hi,
We have a strange problem, recently we have upgraded our server from XI 3.0 to PI 7.1 and after the upgrade
as part of post upgrade steps I had to deploy few SDA/SCA files, while I am trying to deploy these files
I am getting the error "Error during validation of the dependencies of the selected hot fixes" during the check queue phase and I am not able to go ahead..
As I am facing the same error for three different kinds of SDA files, I was trying to apply SP03 for my
JSPM version 7.11.0.0.119 but even here I am facing the same error.
I am sure that what ever the files I am trying to deploy are correct because these are instructed by SAP.
I guess I have some problem with my JSPM.
Please help me.
Thanking you in advance.
Sonali

Hi,
There is no SDM in NW 7.1. All the deployments have to be carried out by JSPM itself.
Sonali - Can you check the JSPM logs and give complete log ?
Also can u mention the SDA file names ?
Are they standard SAP SDA files or custom files ?
Cheers......,
Raghu

JSPM: Error during validation of the dependencies of the selected hot fixes

Hi,
We have a strange problem, recently we have upgraded our server from XI 3.0 to PI 7.1 and after the upgrade
as part of post upgrade steps I had to deploy few SDA/SCA files, while I am trying to deploy these files
I am getting the error "Error during validation of the dependencies of the selected hot fixes" during the check queue phase and I am not able to go ahead..
As I am facing the same error for three different kinds of SDA files, I was trying to apply SP03 for my
JSPM version 7.11.0.0.119 but even here I am facing the same error.
I am sure that what ever the files I am trying to deploy are correct because these are instructed by SAP.
I guess I have some problem with my JSPM.
Please help me.
Thanking you in advance.
Sonali

Just updated your other post -
Java deployment tools on NW 7.1
Error during validation of the dependencies of the selected hot fixes
Btw, could you check the documents of these SDA files in case there is soem common dependency?

Error during validating Project Mgmt Templ. in Item

Hi Gurus,
I am working with PPM 5.0 and facing an issue while creating a Project from Project template that is assigned to an Item type. In Item detail screen, when I click on "Create Project on saving" check-box and select a particular Project Template, I am getting message "Error during validation of Project management template".
Following are the IMG activities I have done:
(1) Define Portfolio Item type:
- Link to Project system = Portfolio and Project Management
- NoAutoPro = " "
(2) Map Item type to Project Templates:
- Item type to Project template = I have mapped two Project Mgmt templates to one Item type
- Item type to Project type = mapped accordingly
(3) In Base System Interfaces -> Application Object Settings -> Define Object Link Types:
- For all 0RPM* objects, I have mentioned Logical and Destination system as newly created Logical system which is already assigned to system client.
After doing these settings also I am facing the above mentioned error.
Can anyone please guide me where I am going wrong?
Thanks in advance.

Hi Ravi,
Considering above mentioned Object link grouping, I also made the changes in DFM.
Following is the screenshot showing same. Unfortunately still no luck.
<< Object type setting >>
<< DFM settings for obj synchronization >>

During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation. Tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!

During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation.
"An Error occured during intstallation of Assembly "Microsoft .VC80.CRT type="win32". version="8.0.50727,6195", public Key Token="1fc8b3b9a1e18e3b, processor Architecture'+x86'". This is all followed by some more text and code HRESULT:0x80070005
Ive tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!
Anne Marie

Probably should've searched around a bit more. Just saw a similar forum post to my own in which redownloading and burning solved another user's similar issue. As of now I've redownloaded the 64-bit ISO, burned it, and so far so good (at 72% extracting files). I will repost here if it was a success in hopes that other users with a similar issue find this and benefit from it. Hope I didn't just waste anyone's time with a question that had already been answered (haha)

SAP PI 7.3 : Error during validation

Hello Everyone,
I have an error during the validation, and I don't now where is the problem.
The error is :
     <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30"
                                                xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
          <SAP:Category>XIServer</SAP:Category>
          <SAP:Code area="XML_VALIDATION_INB">CX_XMS_SYSERR_VALIDATION</SAP:Code>
          <SAP:P1>com.sap.aii.utilxi.xmlvalidation.impl.XMLValidationException: XML Validation for payload with root element
                                name Orders , target namespace Failed!Errors Encountered During Parsing 1.cvc-elt.1: Cannot find the
                                declaration of element 'Orders'.</SAP:P1>
          <SAP:P2>XML Validation for payload with root element name Orders , target namespace Failed!Errors Encountered
                                During Parsing 1.cvc-elt.1: Cannot find the declaration of element 'Orders'.</SAP:P2>
          <SAP:P3>Schema Not Available in Cache, try to validation with file system schemas. Validation With File System
                                 schemas also Failed. XML Validation for payload with root element name Orders , target namespace
                                  Failed!Errors Encountered During Parsing 1.cvc-elt.1: Cannot find the declaration of element 'Orders'.
                                 </SAP:P3>
          <SAP:P4/>
          <SAP:AdditionalText>not used at the moment.</SAP:AdditionalText>
          <SAP:Stack>System error occurred during XML validation</SAP:Stack>
     </SAP:Error>
The XSD File for the validation is the following
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema targetNamespace="http://site.be/Commandes" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://site.be/Commandes">
        <xsd:element name="Orders" type="Orders"/>
        <xsd:complexType name="Orders">
                <xsd:annotation>
                        <xsd:documentation xml:lang="EN">DT_Orders</xsd:documentation>
                </xsd:annotation>
                <xsd:sequence>
                        <xsd:element name="ligne" maxOccurs="unbounded">
                                <xsd:complexType>
                                        <xsd:sequence>
                                                <xsd:element name="Field1" type="xsd:string"/>
                                                <xsd:element name="Field2" type="xsd:string"/>
                                                <xsd:element name="Field3" type="xsd:string"/>
                                                <xsd:element name="Field4" type="xsd:string"/>
                                                <xsd:element name="Field5" type="xsd:string"/>
                                        </xsd:sequence>
                                </xsd:complexType>
                        </xsd:element>
                </xsd:sequence>
        </xsd:complexType>
</xsd:schema>
Can someone give me some input to help me to resolve this problem ?
Thanks a lot
JC

How about a slight change to the xsd? Try with the following, it seems to work fine:
<?xml version="1.0"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <xsd:element name="Orders" type="Orders"/>
   <xsd:complexType name="Orders">
      <xsd:choice minOccurs="0" maxOccurs="unbounded">
         <xsd:element name="ligne">
            <xsd:complexType>
               <xsd:sequence>
                  <xsd:element name="Field1" type="xsd:string" />
                  <xsd:element name="Field2" type="xsd:string" />
                  <xsd:element name="Field3" type="xsd:string" />
                  <xsd:element name="Field4" type="xsd:string" />
                  <xsd:element name="Qte" type="xsd:string" />
               </xsd:sequence>
            </xsd:complexType>
         </xsd:element>
      </xsd:choice>
   </xsd:complexType>
</xsd:schema>
You might also find this tool useful for testing such scenarios:
http://xsdvalidation.utilities-online.info/
By the way - how did you get the xsd that you are currently using?

Error occurred during budget check

Good Morning PS Gurus<
We are unable to increase the quantity of the matearil
in project & save. It’s throwing error
Error occurred during budget check, see cost protocal
Message Number :IW172
Diagnosis:
An error occurred during budget availabilty check
Procudure:
Display the cost determination log for the order or network plan for more detailed information.
We do’t have budget in our project. I checked budget TL ( it said warning message:1)
Please throw light on this issue.
Thanks
PY

Hello Team,
When i select the network-activityà extrasà logsà cost calculation.
It said WBS <<PRO1234> do't exist CJ021
Please help.
Thanks
PY

Adhoc Query : Error during selection; check the selection conditions

Hi
We have a report set-up and which we want to run using our adhoc query report tcode S_PH0_48000513
The report, has a few different selection criteria in it to look at all action IT screen data in the system for ee's in specific personnel areas. There is also a criteria to allow us to paste in specific employee numbers we are interested in. The issue I am facing is that over about 3000 ids, the system automatically returns me a message when I click on the Output button to run the report which states:
Error during selection; check the selection conditions
Message no. PAIS206
I am not sure why this is happening. The selection criteria are fine and the other day I ran the report and I experienced no issues. The report ran successfully. Now though, if I try and paste in all the ids I am interested in (about 8000) I get this message straightaway.
Can anything be done to overcome this issue?
Any advice would be much appreciated.
Nicola

Hi
The message in full is:
Error during selection; check the selection conditions
Message no. PAIS206
Diagnosis
A runtime error occurred during dynamic selection.
System response
The runtime error will be caught; no short dump will be created. This error should not occur as a rule. However, very large select statements may trigger the runtime error SAPSQL_STMNT_TOO_LARGE or DBIF_RSQL_INVALID_RSQL. There is no way to prevent this happening. In this case, the error can only be caught.
Procedure
Check the selection conditions to see whether the error was caused because the option "Import from text file" included too many objects in the "Multiple selection" dialog. If this is so, you must limit the number of individual values.

Syntax error in validation check "DHVALID", step "001"

Hi,
I have booked invoice for $ 25,000.00, now i want to make this payment via t-code F-53. At that time system giving error i.e. "Syntax error in validation check "DHVALID", step 001*"
Request to you please tell me what are the steps to resolve this issue.
Regards,
Nilesh Surve.

Hi,
Check validations in ob28. It seems there are some validations, for which paramters are set for accounts or transaction code.
Regards

An unexpected error occurred during validation

Hi Ramesh,
This is Jaden I work with Shamik :)
We had the following question we were hoping you could help us with.
We are trying to recieve a 850 document in the b2b server. We get the following error - An unexpected error occurred during validation
our document we recieve is below. We use the document analizer and the document validates against the .ecs file fine. We notice that the server is missing the b2b log any thoughts?
ISA~00~ ~00~ ~ZZ~Allied ~ZZ~UPS ~070721~1459~U~00200~000001008~0~P~+'GS~PO~Allied~UPS~20070721~1459~1008~X~004010'ST~850~1008'BEG~00~SA~60009~86974~20070717'DTM~010~20070717'TD5~~2~000001_DHL_A_2DA'N1~ST~19427~92~7984'N3~500 Oracle Pkwy'N4~Redwood City~CA~96504~US'N1~BT~19427~92~7984'N3~500 Oracle Pkwy'N4~Redwood City~CA~96504~US'PO1~1.1~1~EA~~~VP~50934~~~DV~255154'PID~F~~~~3PL Test Item with Lot Control'PO1~2.1~2~EA~~~VP~50936~~~DV~255155'PID~F~~~~3PL Test Item with Serial Control'PO1~3.1~3~EA~~~VP~50935~~~DV~255156'PID~F~~~~3PL Test Item with Locator Control'PO1~4.1~4~EA~~~VP~50936~~~DV~255157'PID~F~~~~3PL Test Item with Serial Control'PO1~5.1~100~EA~~~VP~50936~~~DV~255158'PID~F~~~~3PL Test Item with Serial Control'SE~21~1008'GE~1~1008'IEA~1~000001008'

Hello jaden,
Please edit tip.properties as follows and restart b2b. The log file will be generated at OH/ip/log/b2b/b2b.log.
oracle.tip.LogType=text
b2b.oracle.tip.DiagnosticLevel.B2B=DEBUG
Make sure the delimiter used as part of configuring the document, i.e Document Protocol parameters are appropriate. The document might have validated in the spec builder as the delimter which is defined there might be different.
Please setup a quick call if you still face issues.
Rgds,
Ramesh

Error occured during budget check while planning in network activity

Dear All,
i have created a project with 4 WBSE. i have assigned budget to one of these WBSE and released that project. than i want to do planning in next WBSE this is giving error while saving this planning as Error occured during budget check, see cost.
i have created user status for budgeting like if we have not budgeted than WBS is not able to release. i have added availability control as Forbidden while not budgeted but this not effective.
please suggest me some thing to remove this problem
thanks
Sunil

hi,
In WBS you can Plan and budget to group WBS , the below wbs will consume budget form top.
Proj>WBS1(Group WBS- Plan/Budget) it is applicable for below all wbs elements say WBS2>WBS3
When you are determining Hierarchy you should create WBS in same levels then only you can allocate Budget.
If you wan to allocate budget for WBS2 and WBS3 separately.
Proj
WBS1
WBS2                    WBS3
     WBS2A                   WBS3A
          WBS2B                    WBS3B
               WBS2C                         WBS3C
Proj>WBS1 (it will no more act as Group wbs element) then you can directly plan and budget for below wbs elements WBS2 and WBS3.
Below hierarchy will consume budget from as displayed above.
Note: In you case as per my understanding return budget make zero, then plan and budget the same it will work.
Thanks and regards
Sadiq

IW172 : Error occured during Budget Check see Cost Protocol

Hello Guru's
While creating Capital Reservation in the Network i am getting the error " IW172 : Error occured during Budget Check see Cost Protocol" In making reservation we don't book any cost in the reservation.The Resv is charged by making SR.The amount is still available against the WBS Element.Please suggest what needs to be done.
From
Aashutosh

Check whether the following note helps you:-
Note 551677 - Process order: Availability control against WBS element
G. Lakshmipathi

Proxy Activity terminated because errors occurred during package checks

Hi,
When i am activating the client proxy class in ECC system after assigning it to the package,i am getting the below error.With local object($TMP) its working fine. I tried creating package using se80 as well as from sm30 using view V_TDEVC also and the package is created with no restrictions also .Kindly suggest what needs to be done to fix the issue.
Activity terminated because errors occurred during package checks
Message no. EU839
Diagnosis
Dictionary objects can only be activated if the package check is swithch ed on - provided they do not contain any package check errors.
You will receive a list of the package check errors if you execute the package check within the appropriate dictionary tool. To do this, use the respective menu entry in the first menu of theen; corresponding dictionary tool.
Procedure
Keep note of the setting for the package check (system-wide property) in your SAP System; this setting defines in which form the package concept is to be applied.
In particular, check whether the package in which the incorrect dictionary object is located has sufficient usage applications. Then, if necessary, create the missing usage applications.
As soon as the package check errors have been removed, you must again activate the dictionary object.
Thnx,
Goutham

Hi Bhuvan,
Check Rashmi's response in this thread:
Re: Error in package dictionary objects (Proxy activation)
Regards,
Ravi Kanth Talagana

Error in CXD1 (EC-CS) during Validation Check

Similar Messages

Maybe you are looking for