Error in data extraction

Hi all,
I getting following error while extracting data from R/3.
1 LUWs confirmed and 1 LUWs to be deleted with FB RSC2_QOUT_CONFIRM_DATA
Call up of customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 503 records
Result of customer enhancement: 503 records
Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 503 records
Result of customer enhancement: 503 records
Asynchronous sending of data package 000001 in task 0002 (1 parallel tasks)
Through selection conditions, 0 records filtered out in total
tRFC: Data package = 000001, TID = AC10033853994554E73BF620, duration = 00:00:06, ARFCSTATE =
tRFC: Begin = 11.11.2006 01:55:19, End = 11.11.2006 01:55:25
Lock table overflow
Job cancelled
I am extracting data for FI line items.
Please help me out....
Regards,
Viren.

hi,
when i gave * as queue name.. there is one queue BW5000FI_AR_4.
Cl. Queue name               Destination          Entries    Status   1. Date    1.Time   NxtDate    NxtTim   Wait for queue
500 BW5000FI_AR_4            BP1CLNT500                    1 NOSEND   11.11.2006 01:50:50 11.11.2006 01:50:50
Actually my deltas are not working from 11th. So can you tell me what to do now ??
What is the impact of deleting LUWs and will i get the data of 12th and 13th.
Regards,
Viren.
Message was edited by:
        Virendrasinh Rana

Similar Messages

  • Error in data extraction for 0TCT_DS22

    Hi All .
    I am facing issue in data extraction for 0TCT_DS22 , its giving message 'error in source system ' and also giving a dump
    Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
    Date and Time 24.05.2010 11:22:53
    Short text
    No more storage space available for extending an internal table.
    What happened?
    You attempted to extend an internal table, but the required space was
    not available.
    As per following thread i updated the table but still data load is failing ( Our system is at EHP1)
    DataSource 0TCT_DS22 not extracting Data
    Any pointers what could be the solution for this data load failure .
    Thanks.

    Hi Neetika,
           This type of error occures due to lack of memory in server or no process is available for request process.
    Please refer below forum.
    Re: Runtime Errors  TSV_TNEW_PAGE_ALLOC_FAILED
    Have you done any custom coding? if yes then check the loop.. endloop statement. (not closing loop)
    Thanks & Regards,
    Ashish

  • Error in Data Extraction - Urgent

    Hi,
    I am getting the following error while extracting master data for 0INFO_REC.
    Value '000000000000101034 ' for characteristic 0MATERIAL is in
    external format
    Thanks

    Hi Shiva,
    Unfortunately I dont access to my BW system today. So I do not know the exact conv routine for 0MATERIAL.
    You can instead try this: Go to the transfer rules and for the 0MATERIAL info-object check the check-box for Conversion. Then retry the load.
    Hopefully it should work.
    Bye
    Dinesh
    (Do not forget to assign points!!).

  • Error in Data Extraction for Asset Accouting Data Source

    Hi all,
    We have install the new flow of the Asset Accounting i.e 0FI_AA_20 data source. We are trying to load the data in BW. The problem is the volume of data is so high. Around 35 lacs records.
    I am getting below error while loading in the BW.
    "Error 7 when sending an IDoc"
    "No more storage space available for extending an i 3 "
    Please suggest..
    Regards,
    Macwan James.

    Hi Macwan James,
    Not only the requests from DS to which you are loading data. You can delete the requests from other DS--> manage screens also if they are no longer required.
    Or else use selection screen of Infopackage to load the data. Change the selections & try to load the data.
    Hope it helps!
    Regards,
    Pavan

  • Open data extraction orders -  Applying Support Packs

    Dear All,
    I have done the IDES 4.6C SR2 installation.
    While updating the support packs, i get the message saying
    CHECK_REQUIREMENTS phase.
    Open data extraction orders
    There are still open data extraction orders in the system
    process these before the start of the object import because changes to the ABAP Dictionary structures could lead to data extraction orders not being able to be read after the import and their processing terminating
    For more details about this problem, see Note 328181.
    Go to the Customizing cockpit for data extraction and start the processing of all open extraction orders.
    I have checked the Note.
    But this is something m facing for the first time.
    Any suggestion!!!
    Rgds,
    NK

    The exact message is :
    Phase CHECK_REQUIREMENTS: Explanation of the Errors
    Open Data Extraction Requests
    The system has found a number of open data extraction requests. These
    should be processed before starting the object import process, as
    changes to DDIC structures could prevent data extraction requests from
    being read after the import, thus causing them to terminate. You can
    find more information about this problem in SAP Note 328181.
    Call the Customizing Cockpit data extraction transaction and process all
    open extraction requests.

  • SPAM/SAINT - Open Data Extraction Requests

    Hello All i am getting an warning during implementing patches for netweaver 701 sp3 and sp4.
    "  Phase CHECK_REQUIREMENTS: Explanation of Errors
    Open Data Extraction Requests
    The system has found a number of open data extraction requests. These
    should be processed before starting the object import process, as
    changes to DDIC structures could prevent data extraction requests from
    being read after the import, thus causing them to terminate. You can
    find more information about this problem in the SAP Notes 1081287,
    1083709 and 328181.
    Call the Customizing Cockpit data extraction transaction and process all "
    i checked listed note and implemented the same but still its showing me something in LBWE. i deleted all setup data for all the application data using tcode LBWG but its still showing in LBWE tcode.
    this is the error i am getting after runing program 'RMCEXCHK'
    Struct. appl. 04 cannot be changed due to setup table -> Long text
    Message no. MCEX141
    Diagnosis
    Changing the extract structure  for application 04 is not permitted, because the restructure table MC04P_0ARBSETUP for the extractor still contains data in 800.
    You cannot change the structure in this status, because when you load an InfoPackage from BW, this leads to errors.
    Procedure
    Delete the entries for all restructure tables for application 04.
    Any reply will be highly appreciated.
    Mani

    Hi Mani
    I am also facing the same issue. Can you please tell me how you have resolved the issue.
    Thanks & Regards
    Venkat

  • 'Error 8 occurred when starting the data extraction program'

    Hello Experts,
    I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
    So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
    But when I check the extractor through RSA3, it looks fine.
    Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
    Thanks
    Regards,
    KP

    Hi,
    Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
    Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
    rgds,
    Edited by: Krishna Rao on May 6, 2009 3:22 PM

  • R/3 SP Import:Open data Extraction requests Error

    We are getting the below error when Basis doing the upgrade support packeage in R/3 source system.
    Open Data Extraction Requests
    The system has found a number of open data extraction requests. These
    should be processed before starting the object import process, as
    changes to DDIC structures could prevent data extraction requests from
    being read after the import, thus causing them to terminate. You can
    find more information about this problem in SAP Note 328181.
    Call the Customizing Cockpit data extraction transaction and process all
    open extraction requests.
    Intially we have cleared the entries in LBWQ,RSA7 and SM13.But after clearing these entries also we are getting the same above error.
    For support package upgrade in R/3 do we need to delete the SETUP table also in production environment?.
    Is there any other way around without deleting the setup table to upgrade support package in R/3 system?
    Please help us with your inputs urgently..
    Thanks
    Message was edited by:
            Ganesh S

    Thanks Siggi for the suggestion.
    We have already cleared the v3 updates by running RMBWV* job manually.After clearing all the entries in LBWQ,RSA7 and SM13 still we have got the same above error.
    When we imported In R/3 development system after deleting the setup table we didn't get the above error.But we are concerned about deleting the setup table in production system
    though already deltas are running fine.
    Is there any other way around? or deleting the setup table is the only option?
    Please help...

  • Invalid data status error during the data extraction

    Hi,
    while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
    when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
    how can i rectify the data extraction problem..can you advice.
    Thanks,
    Dhanush

    Sir,
    In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors.

  • [sap-bw] SAP HR data extraction errors....into BI 7.0 ...from ECC 6.0..

    Hi Gurus,
    We are doing HR data extraction with the following details:
    Cube: 0PT_C01 - Time and Labor
    data source: 0HR_PT_1 - Times from personal work schedule
    Records in ECC: 15mill +.
    "Init load with Data "is being loaded in packets of 40K records (400 packets approx).
    Each time we load (we tried reloading after deleting data and reinit) it is loading same records. But it is giving the following error. Surprisingly this error is coming for different packets in different loads. for ex: 1st time packet 6...2nd time packet 58....3rd time 122 etc.....it keeps changing...
    Processing end : Errors occurred
    Error when generating the update program
    Diagnosis
    An error occurred during program generation for InfoSource 0HR_PT_1 and
    InfoProvider 0PT_C01 . This may be extrapolated to incorrect update
    rules.
    Procedure
    Check and correct your update rules and then generate the update program
    again. You can find help on the error in the error log.
    We reactivated and verfieid update rules. But no use.
    Appreciate any kind of help.
    thanks in advance.
    J.

    Oscar,
    Thanks for the help.
    We tried the following one by one.
    1. Delete and recreate update rules.  To be frank....there is no CODING or complication in there...
         It did not work.
    2. Tried loading only to PSA.  It loaded 15mill records perfectly.  But when we tried updating target cube, 
        same story with many more errors.....earlier we had 10 packages failed out of 387.......
         this time almost every  alternate package is marked red and same error....update generating update
         program.....
    Hope somebody will come up with a solution.

  • Position Activity Sequence Resulting in data extracting error

    hi gurus
    can any body tell me what is this position activity sequence error resulting in data extracting error, plz help. this is very high priority for me.
    regards
    dev

    I rebuild the report using a tabular form and populated the primary key with a PL/SQL expression and now it appears to be working. P1_ISSUE_NO is the primary key on the issue table and I could not figure how to get it in the issue_no field of the tabular report when a new line was entered I ended up putting the following code in for the default for
    issue_no on the report:
    Begin
    return :P1_ISSUE_NO;
    end
    It works great.

  • Delta Load Error in the Data Extraction

    Hi BI Guru`s,
    The issue is with the extractor 2LIS_13_VDKON (Pricing conditions), The regular delta till 22.07.2010 has run successfully, But on 23.07.2010 the delta got failed with the error message " Data Package 58 : arrived in BW ; Processing : Processing not yet finished, entry 70 still missi" for one of the Datapacket. We have repeated the load even though we got the same error message, Since the client is retailer we will be having the delta records of 200 million ( approx. 23369612) in a day. Since because of this error we could't load any of the delta from that day onwards.
    Need Help on this:
    1. How to get the old delta
    2. How to re-initialize the process for delta. (Pls keep it in mind the volume of the records).
    Thanks in Advance,
    Venkat

    Hi,
    Here we need decrease the datapacket size as well as prallel proceesing .
    than we need to load the historical data through dalta repetition
    hope..helpful for you!
    Regards!
    Malli.

  • Master Data Extraction Error

    Hi Experts,
    I am doing MAster Data Extraction, i have done with major works in R3 Side, but i am facing as issue while distributing the Mode,
    Before that i brief the things what i have done,
    1) ALE Configuration in ERP R3 System
    2) Created a New Logical System for Receiver PI System
    3) Created the Logical System for Sender R3 System & Assigning the Client
    4) Configured of RFC Destination Pointing to PI System
    5) Configured of Communication Port
    6) Configurated of Partner Profile
    7) Created ALE distribution Model/Customer Distribution Model
    After creation of the Model  i ahve added  the Message type. Then Partner Profile needs to be generated and the Distribution model needs to be distributed from the Edit Menu.
    But while doing the above step i am facing a issue as " No Messages have been defined for the selection conditions in the model".
    Please do needful.

    hi,
    if you''re a PI started I'd suggest:
    http://www.sap-press.com/products/Mastering-IDoc-Business-Scenarios-with-SAP-NetWeaver-PI.html
    chapter:
    3 ... Master Data Distribution ... 95
    for a good start
    Regards,
    Michal Krawczyk

  • BODS 3.1 : SAP R/3 data extraction -What is the difference in 2 dataflows?

    Hi.
    Can anyone advise as to what is the difference  in using the data extraction flow for extracting Data from SAP R/3 ?
    1)DF1 >> SAPR/3 (R3/Table -query transformation-dat file) >>query transformation >> target
    This ABAP flow generates a ABAP program and a dat file.
    We can also upload this program and run jobs as execute preloaded option on datastore.
    This works fine.
    2) We also can pull the SAP R/3 table directly.
    DF2>>SAPR/3 table (this has a red arrow like in OHD) >> Query transformation >> target
    THIS ALSO Works fine. And we are able to see the data directly into oracle.
    Which can also be scheduled on a job.
    BUT am unable to understand the purpose of using the different types of data extraction flows.
    When to use which type of flow for data extraction.
    Advantage / disadvantage - over the 2 data flows.
    What we are not understanding is that :
    if we can directly pull data from R/3 table directly thro a query transformation into the target table,
    why use the Flow of creating a R/3 data flow,
    and then do a query transformation again
    and then populate the target database?
    There might be some practical reasons for using these 2 different types of flows in doing the data extraction. Which I would like to understand.  Can anyone advise please.
    Many thanks
    indu
    Edited by: Indumathy Narayanan on Aug 22, 2011 3:25 PM

    Hi Jeff.
    Greetings. And many thanks for your response.
    Generally we pull the entire SAP R/3 table thro query transformation into oracle.
    For which we use R/3 data flow and the ABAP program, which we upload on the R/3 system
    so as to be able to use the option of Execute preloaded - and run the jobs.
    Since we do not have any control on our R/3 servers nor we have anyone on ABAP programming,
    we do not do anything at the SAP R/3 level
    I was doing this trial and error testing on our Worflows for our new requirement
    WF 1 : which has some 15 R/3 TABLES.
    For each table we have created a separate Dataflow.
    And finally in between in some dataflows, wherein, the SAP tables which had lot of rows, i decided to pull it directly,
    by-passing the ABAP flow.
    And still the entire work flow and data extraction happens ok.
    In fact i tried creating a new sample data flow and tested.
    Using direct download and - and also execute preloaded.
    I did not see any major difference in time taken for data extraction;
    Because anyhow we pull the entire Table, then choose whatever we want to bring into oracle thro a view for our BO reporting or aggregate and then bring data as a table for Universe consumption.
    Actually, I was looking at other options to avoid this ABAP generation - and the R/3 data flow because we are having problems on our dev and qa environments - giving delimiter errors.  Whereas in production it works fine. Production environment is a old set up of BODS 3.1. QA and Dev are relatively new enviornments of BODS. Which is having this delimiter error.
    I did not understand how to resolve it as per this post : https://cw.sdn.sap.com/cw/ideas/2596
    And trying to resolve this problem, I ended up with the option of trying to pull directly the R/3 table. Without using ABAP workflow.  Just by trial and error of each and every drag and drop option. Because we had to urgently do a POC and deliver the data for the entire e recruiting module of SAP. 
    I dont know whether i could do this direct pulling of data - for the new job which i have created,
    which has 2 workflows with 15 Dataflows in each worflow.
    And and push this job into production.
    And also whether i could by-pass this ABAP flow and do a direct pulling of R/3 data, in all the Dataflows in the future for ANY of our SAP R/3 data extraction requirement.  And this technical understanding is not clear to us as regards the difference between the 2 flows.  And being new to this whole of ETL - I just wanted to know the pros and cons of this particular data extraction. 
    As advised I shall check the schedules for a week, and then we shall move it probably into production.
    Thanks again.
    Kind Regards
    Indu
    Edited by: Indumathy Narayanan on Aug 22, 2011 7:02 PM

  • How to handle errors in data templates

    Hi
    What is the recommended way to handle errors for example if one of your SQL statement in a data template returned no data how and where would you be able to create an error message for the user to find and read.
    Thanks,
    Mark

    The closest I have come to doing this is to put conditional statements into the format template. If a value matches an expected (ex. is null) you can return a message (in the report) via the format template (ex. "No Data Found").
    I am not sure this really answers your question as this is in the format template, but I generally view them as a matched pair that work together. I try to stick with data extraction in the data define, and do all my conditional stuff in the format templates.
    Scott

Maybe you are looking for