Error in data loads-Error occured in the data seletion
Hi,
We have to do an init load for Period 10 from data source 0EC_PCA_3.
When the period changes we usually copy the previous infopack and change the fiscal yesr period and do an init load.
This time we have to change the fiscal period to 010, we created a new info pack but the fiscal year period we forgot to change and was 009 and scheduled a init load.
The load failed with error mesg IN EXTRACTION PART:
1) syntax error in RSCDELTA
2) Error occured in the data selection -RSM 340
REQUEST part in monitor screen is green.
TRANSFER part in monitor screen is green
EXTRACTION shows:
Data request received ---green
Data selection scheduled -
green
Error occurred in the data selection -
RED
Processing (data packet): No data ---RED
We deleted the red request in the ods , deleted the init load in scheduled -init for source system --- chnaged the fiscal yesr period to 010 and triggered a new load but again it gives the same error mesg.
How to rectify this and do loads to the target successfully.
Please suggest
Please check the job log in the source system. It will give you the exact reason why extraction is failing. You need to act accordingly.
Thanks..
Shambhu
Similar Messages
-
"Error occurred in the data selection" on init delta load ODS- InfoCube
Hi, gurus and experts!
I'm trying to do Init delta load from 0FIAR_O03 ODS into 0FIAR_C03 InfoCube in PRD env. by InfoPackage "Initialize with delta transfer (with data transfer)". Immediately after the load was started I got error
"Error occurred in the data selection"
with details
"Job terminated in source system --> Request set to red".
Where are no any short dumps. There are 1 activated init load in ODS - nearly 6 500 000 records.
Any ideas about error? And the way I can load data?Hi Gediminas Berzanskis,
I faced the similar error when I tried to load data from an ODS which contained huge amount of data to a Cube. Even in your case the volume of data is more (around 6.5 million records). The error could be due to the table space issue, please contact your Basis team to check if enough table space exist for both the data targets.
Meanwhile you may also check the RFC connection of the Myself source system.
You can replicate the DSO datasource once and then reactivate the transfer rules using the program RS_TRANSTRU_ACTIVATE_ALL.
Try load with a small amount of data with a Full load option and then with a delta option..
Hope this Helps,
Prajeevan (XLNC) -
Error occurred in the data selection
Hi Expert,
I met issue when full loading data from R3 via customized datasource.
the error message in request monitor is:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
I checked in RSA3, the data extraction is successful, but in BW, when execute the infopackage with or without data selection, both failed due to the same error.
I also checked the background job in SM37 in source system, the background BI* completed successfully, and the IDoc in both BW and source system processed successfully.
I also tried to replicate datasource and activate is using RSDS_DATASOURCE_ACTIVATE_ALL, delete infopackage and recreate it. but seems all this didn't work.
Could u pls tell me how to solve this issue? Thanks.
EileenHello Eileen zhang,
I have exactly the same error as you, do you still remember how did you solved this problem?
Regards,
Thanks,
Maria João
Error message:
"Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request." -
Error 8 when starting the extracting the program-data load error:status 51
Dear all,
<b>I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). </b>The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
<b>bi data upload error:status 51 - error: Error 8 when starting the extracting the program </b>
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
IDoc sent to SAP system or external program"
r<b>/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
Error 8 when starting the extraction program</b>
Info IDoc 1 : Application document posted (green)
r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
IDoc sent to SAP system or external program"
bw side: "IDoc: 0000000000007089 Status: Application document posted,
IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
check connection is ok, tried to restore the setting for bw-r3 connection though same problem
Have checked partner profile.
<b>what's wrong with the process? </b>
Best regards,
dushyant.Hi,
Refer note 140147.
Regards,
Meiy -
Error occurred in the data selection,If i do Repeat, then it is working fin
Hi Freinds,
Here is the error message,
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Details Tab:
Extraction (messages): Errors occurred
Error occurred in the data selection ....
If i do Repeat Delta, then it is working fine.
As it is a daily load, manually repeating the load from the past 10 days.
Have tried using program RS_TRANSTRU_ACTIVATE_ALL.
Any inputs pls.....Hi Friends,
Thanks for your valuable inputs, Problem is solved.
The Reason is that, there is a time difference in the r/3 system and bi system.
The tolerable time differene shud be only 60 seconds.
Basis guys took down time at the OS level and hav made the timers sync.....
The problem is on the source system GNP time differences
persists, which can cause the problem with delta upload .
Universal Time Coordinated UTC....: 1291187626
Date and time of database.........: 01.12.2010 12:46:59
Date and Time of R/3-Kernel.......: 01.12.2010 12:43:46
Date and Time of ABAP-Processor...: 01.12.2010 12:46:58
ABAP Time zone Setup ..............: 19800
Date and Time / local time ........: 01.12.2010 12:43:46
This leads to an exception of the delta processing, because this
tolerates a deviation of 60 seconds only (When the repeat is processed,
the "local time" in the ABAP is higher than the qrfc counter at the time when the delta was processed -> So a repeat works fine).
Please synchronize the timers like described in attached note 101726 and 741734 to eliminate the time difference .
With Regards
Badri Thiriveedhi. -
Error occured in the data selection while extract data from Source system
Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With errorHi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star -
Hello, since I've updated to Firefox 27.0.1 on Windows 7, I'm encountering a problem with Reporting Services on a Sharepoint site. It is a Sharepoint 2010 site with SQL Server Reporting Services 2012 Sharepoint Integrated mode. I was previously on Firefox version 26 and didn't encounter this problem.
When a report is open and you use the Actions link on the Reporting Services toolbar, I receive the following error messages.
An error has occurred with the data fetch. Please refresh the page and retry.
I've tried updating to Firefox 28 beta but the same error occurs. I see another user is having the same problem here. http://sharepoint-community.net/forum/topics/reporting-service-and-firefox-27
Any help would be appreciated. Thanks!
RyanRachel, I did perform the Sharepoint file alteration discussed in the other article and it did stop Firefox from producing the error. I've done some testing on some other browsers and have yet to encounter any problems with the fix however I'm hesitant to perform that workaround in a production environment.
Thanks for looking.
Ryan -
Process chains-Error occurred in the data selection-DBIF_RSQL_TABLE_UNKNOWN
Hi All,
The problem occurred in PC which was running smooth until now
Now I am getting message:
in BI : Error occurred in the data selection
When I went in R/3 it shows DBIF_RSQL_TABLE_UNKNOWN
Probably the only way to eliminate the error is to correct the program.
Please check the entries in the system log (Transaction SM21).
Internal call code.........: "[RSQL/READ/PA0009 ]"
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
DBIF_RSQL_TABLE_UNKN
SAPLXRSA" or "ZXRSAU
EXIT_SAPLRSAP_002"
Can anyone explain..Hi ,
Check note 950317.
also check the blow forum having same kind of discussion :
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
Short dump error DBIF_RSQL_TABLE_UNKNOWN
DBIF_RSQL_TABLE_UNKNOWN
thanks,
Deepak -
Error message :"Error occurred in the data selection"
Hi All ,
When I am exracting a Delta from source I am getting this error mesage Error occurred in the data selection" can any one let me know how to slove this,
Thanks in Advance.
raoPraveen,
In SM 37
In JobName i have given - *REQU_4683BBF4HXG4XW4ASQOSP6PJG
where REQU_4683BBF4HXG4XW4ASQOSP6PJG is Request no
User Name is -- *
then I had check all these
sched, Released, ready, active, Finished, cancelled
then executed
then i received the message no jobs are matches the selection criteria
thanks
prasanna -
How to solve "error occurred in the data manipulation engine"? 64bit Windows 7
Hi all
I'm having quite a testing time here trying to use the new SAP PA 2.0. After installation the software launches, the Automated Analytics seems to work fine but not the Expert Analytics.
Steps as follows:
Launch PA
Choose and launch Expert Analytics
Choose Try with Samples
Open the Dairy Wholesaler file
Error: An error occurred in the data manipulation engine. Check the manipulation parameters. (HDB 01001)
I also get this same error when I try to create my own New Dataset.
I’m on 64bit Windows 7 Pro
Is there anyone who knows how to solve this problem. I've searched the SCN and online and have tried the following:
1. Uninstall and re-install. Doesn't help
2. Uninstall and delete old lumira related folders on the C drive e.g. the SAPPA and SAPVI folders on the C drive, then re-install.
Much appreciated if anyone could shed some light on this. I've previously had Lumira working with no issues. I've since uninstalled Lumira, Predictive Analytics, and Infinite Insights (as PA 2.0 is all of this combined)
Regards
RiaIn case anyone has the same problem, I found the the following helpful (taken from Error after upgrading to 1.18 ). The solution is for Lumira however its the same steps for PA2
1. You might want to try a ‘clean’ uninstall / reinstall . After uninstalling, try deleting these folders:
C:\Users\Public\sapvi
C:\Users\<user>\AppData\Local\SAP\Lumira
C:\Users\<user>\AppData\Local\Temp\sapvi
In this step I searched for every SAP related file in AppData in the Public, User, and my own username folder under \Users\
2. Next, to launch the application, explicitly click "Run as Administrator" on the install file -
What are the frequent data load errors in production support?
what are the frequent data load errors in production support?
It is a long list. Here is some of them.
1. Idoc not arriving from source system.
2. previous processes failed.
3. change run unsucessful or did not run properly and data in master data is messed up.
4. invalid characteristics in the data.
5. Duplicate records found.
and on and on.
Ravi Thotahdri -
Data Load Error - Unknown Item
Under the advisement of an Oracle engineer our users were instructed to export the data from one of their DBs using "Level 0 Data", and then import the data back into the database. This process was needed in order to allow us to restore compression on our DBs as it had been lost during a patching process.
In any event,
I've exported the data to a .txt file and now I am attempting to load the file back into the database. I am receiving the below error:
Parallel dataload Enabled: [1] block prepare threads, [1] block write threads.
Unknown Item[-1. #IND] in Data Load, [360639] Records Completed.
Unexpected Essbase error 1003000
I did some searching on the web and located a discussion topic dealing with this type of an error. Id indicated that the error was related to an attempt to write a value to the DB that does not have a corresponding "table" in the DB. I 'kind of see' that from the error message, but I don’t understand how it could be occurring if the data export and import are occurring on the exact same application DB.
Any assistance would be greatly appreciated.
Thanks!It is a planning database, if so log on my oracle support and have a read of -
Error "1003000 Unknown Item [1.#QNAN] or [-1.#IND] in Data Load, [xxxx] Records Completed" [ID 961934.1]
Even if it is not there is invalid data that has been exported.
Cheers
John
http://john-goodwin.blogspot.com/ -
hi friends ,
we are geting data load error as; Process 000087 for deterermined fro infoobject DUVTYPE started in STATUS TAB and in DETAILS TAB update(251new/160 chnaged): Errors occured.
what should i know from information and what are the reasons for this load failure and possible rectification methods.
This load is through process chains and aslo a delta load.
Can i delete the request and start the infopackage manually? also will it make my Process chain Green automatically or should i repeat from the subsequent process?
Plz help.
I award points.
regards,
siddarthaHi siddharta,
look in the details of the monitor to see the error. Be very cautious with deltas! They can not be repeated every time. it depends on the datasource! What you can do is delete the failed request from all(!) the data targets meanwhile!
Regards,
Jzergen -
Most common BW data load errors in production and how to solve them ..
Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shobahi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error -
Data Loading Error : ToomanyError records.
Hi All,
I got Data Loading error when I am loading from Flat File.
Following is the error message :
Too many error records - update terminated
Error 18 in the update
No SID Found for value '00111805' of Characterstic ZUNIQUEID (Message No 70)
can anybody help in resolving the issue.
Regards,
Chakravarthyhi
Check the format of your charecteristics and key figures .
Check you put data separators in you flat files approriately
In the particular charecteristics ZUNIQUEID ,ensure data is consistent...check the related tables
Assign points if useful
Regards
N Ganesh
Maybe you are looking for
-
How to set up a RSS channel via portal
Hi, I know this question is very simple to some but I am a newbie. But I know that we need to use the xml channel to create a rss channel. I am trying to use the swforum rss channel as my example. But where do I find the info for the xslFileName and
-
How can I transfer my iOS update to another iPad?
How can I transfer my iPad iOS update download to my wife's computer so that she can update without having to download the update all over again?
-
Parallels, is it possible to run FSX ???
I love my flight sim and don't have problems running it through bootcamp. I have tried using parallels and i get a message "Flight Sim. not working with your video card, verify you have latest drives installed... " Is there any way to solve this prob
-
Compile error installing rox [SOLVED]
Hi, I'm having problem with compile error installing Rox-filer-2.11. I have searched and nothing explicitly the same has cropped up. The final few lines reads /usr/bin/ld: xtypes.o: undefined reference to symbol 'dlopen@@GLIBC_2.1' /usr/bin/ld: note:
-
Item Security - 'Restricted Characters' option causing unexpected error
Hi, I have a form with some fields on which I would like to enable restricted characters. In the *'Edit Page Item'* form, in the *'Security'* section, there is a setting called *'Restricted Characters'*. When I change this to something other than - A