Error in Data Replication from R3

Hi
We are trying to replicate data from R/3 to SRM & getiing an error msg in SRM Inbound que saying "mapping error". Pls guide what is be done. We have already done replication of Basis3, Prod 0 , Prod1.
Pls. guide what could be a possible reason for this.
Regards
--Vikas

Hi,
What is the error log in SLG1?Are you getting this error when replicating the products?I guess you have missed out some entries in the CRM related tables in R/3.Please check that.
BR,
Disha.
Pls reward points for useful answers.

Similar Messages

Error is data loading from 3rd party source system with DBCONNECT

Hi,
We have just finished an upgrade of SAP BW 3.10 to SAP NW 7.0 EHP1.
After the upgrade, we are facing a problem with data loads from a third party Oracle source system using DBConnect.
The connection is working OK and we can see the tables in the source system. But we cannot load the data.
The error in the monitor is as follows:
'Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.'
But, unfortunately, the error message has no further information.
If we look at the job log in sm37, the job finished with the following log -
27.10.2009 12:14:19 Job started                                                                                00           516          S
27.10.2009 12:14:19 Step 001 started (program RSBATCH1, variant &0000000000119, user ID RXSAHA)                    00           550          S
27.10.2009 12:14:23 Start InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG                                              RSM1          797          S
27.10.2009 12:14:24 Element NOAUTHORITYCHECK is not available in the container                                     OL           356          S
27.10.2009 12:14:24 InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG created request REQU_4FMXSQ6TLSK5CYLXPBOGKF31G     RSM1          796          S
27.10.2009 12:14:24 Job finished                                                                                00           517          S
In a BW 3.10 system, there is no message related to element NOAUTHORITYCHECK. So, I am wondering if this is something new in NW 7.0.
Thanks in advance,
Rajib

There will be three things to get the errors like this
1.RFC CONNECTION FAILED
2.CHECK THE SOURCE SYSTEM
3.CHECK IT OUT WITH Oracle Consultants WEATHER THEY ARE FILLING UP THE LOADS.TELL THEM TO STOP
4.CHECK I DOC PROCESSING
5.FINALLY MEMORY ISSUES.
6.CATCH THE DATA SOURCE FIRST CHANGE IT AND THEN ACTIVATE AND RUN THE LOAD
7.LAST IS MEMORY ISSUE.
and also Check the RFC connection in SM59 If it is ok then
check the SAP note : 692195 for authorization
Santosh

Unexpected database connector error, when data sent from POJO.. Plz Help Me

Hi, Please Help me about this, I have started learning to develop a crystal report with java swing in crystal report integrated eclipse IDE 3.5 but when i am trying to send data from pojo to report file its giving error like "Unexpected database connector error" and Error code:-2147215349 Error code name:docNotReady.... please hlep me... i uploaded my program and the link to download my file is :
http://www.4shared.com/file/mz8O4iQi/SimplePojoReport.html
and i am not using any database just setting the data in the pojo...
i wrote my problem here before, but nobody replied me... so this time i uploaded my project.. please help me...
thanks...

Hell Ted Ueda,
Thanks for your reply, and did you downloaded my project files ? if not then please download it first.. because i retrieving data from the POJO not from any database.. from database its working fine but in case of POJO its not, because i wanna retrieve data dynamically from directly fields to report, means that user will fill all the information in the text box (Swing) and when he click on the button then the data from the text box should be pushed to report file and also should have to saved in the database.. so please download my project file... and help me...
link : http://www.4shared.com/file/mz8O4iQi/SimplePojoReport.html
thanking you..
Arun...

HR Master Date replication from HR to SRM

Hello,
can any one please give me some input about how the replication done from HR to SRM system. what is the Basic and message type used for this replication and which program trigger from HR system to replication an organization data?
thanks,
john.

Hi John,
HR replication from R/3 to SRM is carried out by following these steps:
1.) setting up the distribution model in SRM and R/3 for message type HRMD_ABA. You can set up number of filters in this message type, where you define HR infotypes, subtypes, object type and so on.
2.) Once you set up the distribution model, distribute the model.
3.) Report RHALEINI is used to replicate the distribution model from R/3 to SRM in the insert mode. (You can also use transaction code PFAL).
4.) Ongoing replication if performed in the update mode from R/3 to SRM will cause problems of users being broken in sporadic cases. It is advisable to use change pointers from BD14 to perform the ongoing replication.
There is an SAP docuemntation of EBP transports which explains in detail the replication. Hope this information helps.
Please assign points for usefull answers !!
Sundeep

Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!

error is clear, check your abap code.

HR Master data replication from R3 to SRM

Hi All,
I am trying to replicate one orguint from R3 to SRM.
So I do PFAL for the orguint on R3 but when I check the Idoc status in SRM using transcation WE02
under Status Record there are four status as 51 With following messages:
1)HR: ALE inbound processing for HR master data
2)Error: insertion of infotype 5585 (return code 6 )
3)Error: insertion of infotype 5582 (return code 6 )
4)Error: insertion of infotype 1001 (return code 6 )
I also checked in SRM PPOSA_BBP , the orguint is not replicated.
Any tips on this?
Regards,
Anubhav

Hello Anubhav,
This is due to incorrect HR Master Data Maintainanxce...
Plz go to Transactioon:PA30 Maintain HR Master
and maintain/check the Infotypes 5585, 5582 ,1001 etc
that are shown in the Error Messages of reflection of HR Master to SRM
once after maintaining do the replication again using PFAL(Use Insert option instead of Update)
also refer to below link,might be useful..
http://www.erpgenie.com/sapedi/message_types_bp_hr.htm
Plz let me know
Arshad
Edited by: arshad ahmed on May 27, 2009 8:42 AM

PowerPivot refresh error with data feed from sharepoint list with empty exception information

Hi,
My Powpivot refreshing error seems to be different from what others already experienced.
Scenario:
Constructed an external data source in the format of Http://<server_IP>/sites/<mysitecollection>/_vti_bin/listdata.svc
selected one table with some of the needed columns in the next step
Create calculate colums etc.
Create pivot tables etc.
All worked well offline
Upload the workbook into PowerPivot Gallery
Reference it from a page through Excel Web Service webpart allowing manual refresh
The refresh always reports failure with the named external data source
I opend the log file in C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS and located the following error messages:
ASPPHOST::ShowEngineError: Out of line object 'DataSource', referring to ID(s) 'f8939b694cae', has been specified but has not been used。The following exception occurred while the managed IDbCommand interface was being used: .
Please note in the above message, NO detailed exception message was given. In other words,
the exception information is empty.
I checked as many things as I possibly could includin the security accounts etc. All seem to be right. But this empty exception got me stuck here.
What could possibly go wrong? Any help will be appreciated.
Thanks.

Hello,
Here is a good article regarding Where to get information about data refresh failures for your reference, please see:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
In addition, which credential option you're configured for the PowerPivot data refresh in SharePoint farm? You can go through the following articles regarding configure the PowerPivot data refresh:
Configure the PowerPivot Unattended Data Refresh Account (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ff773327.aspx
Configure Stored Credentials for PowerPivot Data Refresh (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ee210671.aspx
Hope this helps.
Regards,
Elvis Long
TechNet Community Support

Error in data load from application server

Well, this problem again!
In datasource for dataload by flatfile, tab Extraction i selected Load Text-Type File From Application Server.
In tab Proposal:
Converter: Separated with Separator (for Example, CSV).
No. of Data Records: 9198
Data load sucefull.
I add 1 record:
Converter: Separated with Separator (for Example, CSV).
No. of Data Records: 9199
So appear a message error "Cannot convert character sets for one or more characters".
I look in line 9199 in file and not have any special character. I use AL11 and debug to see this line.
When i load file from local workstation, this error not occur.
What's happen?

Hi Rodrigo,
What type of logical file path have yopu created in the application server for loading this file.
Is it a UNIX file path or an ASCII file path.
Did you check how the file looks in the application server AL11?
Prathish

Error while data shifting from one table to another table

i have two tables.
in one table i dont have constraints.in anothe rtable i have constraints.
my requiremnt is i have to shift data from unconstrained table to constrained table
while shifting data any constaint violation is there system hasto raise error by specifying the error
in below example it should be ename,esal values not null.
i tried with save exception but it gives only error.i want error by mentiong that column names also ie ename,esal is not null
if ename value only null then it should be give ename is null
create table tablea (eno number(10), ename varchar2(20) not null, esal number(5) not null)
create table tabl (eno number(10), ename varchar2(20) , esal number(5) )
DECLARE
TYPE tabl_tab IS TABLE OF tabl%rowTYPE;
tab tabl_tab;
-- create an exception handler for ORA-24381
ERRORS NUMBER;
dml_errors EXCEPTION;
PRAGMA EXCEPTION_INIT (dml_errors, -24381);
BEGIN
SELECT *
BULK COLLECT INTO tab
FROM tabl
WHERE rownum<=2;
-- add '_SR' to the job_id of the most senior employees
FORALL i IN tab.FIRST .. tab.LAST SAVE EXCEPTIONS
insert into tablea values tab(i);
EXCEPTION
WHEN dml_errors
THEN
rollback ; --roll backs all the good records updation
-- Now we figure out what failed and why.
ERRORS := SQL%BULK_EXCEPTIONS.COUNT;
DBMS_OUTPUT.put_line ('Number of statements that failed: ' || ERRORS);
FOR i IN 1 .. ERRORS
LOOP
DBMS_OUTPUT.put_line ( 'Error #'
|| i
|| ' occurred during '
|| 'iteration #'
|| SQL%BULK_EXCEPTIONS (i).ERROR_INDEX
DBMS_OUTPUT.put_line ( 'Error message is '
|| SQLERRM
(-SQL%BULK_EXCEPTIONS (i).ERROR_CODE)
END LOOP;
END;
how to implement that.

it should give error as ename column is not null

Error in Data Transfer : From CO-PA to SOP Flexible Planning

Hi Friends
I am working on a Scenario of Transferring CO-PA data to Flexible Planning, I am encountering few problems, I have done the followig steps, request you to check and get back to me..
The following configuration steps are done with Example;
Characteristic assignment
u2022 Sales Organization
u2022 Region
u2022 Plant
u2022 Material Number
u2022 Material Group
Key figure(s) assignment
u2022 Sales Quantity
Assignment: Information structure - operating concern
S555 u2013 Z001
Define activities Z1
Mass Processing Job : ZSO-PA
We are able to transfer data from CO-PA to standard SOP, But we tried for transfer to Flexible Planning SOP by creating Mass Processing Job setting as below configuration path.
Production -> Sales & Operations Planning (SOP) ->Functions -> Mass Processing -> Transfer LIS / CO-PA
After executing Job MC8G - Schedule, we checked in Tcode - MC8I u2013 Check, Status: Processed with errors, And also data are not displayed in Tcode : MC95 for Material & active version.
We couldnu2019t find log for error status.
What is the method / Procedure for transfer data to Flexible Planning SOP?
Please get back to me.

Dear,
Status:            Processed with errors ok
Activities checked:? what is the error message here like
   COPY
       Planning type in activity and job not identical
       Planning type of job: SOPKAPAM
       Plng. type of activity:Z004PLAN
When checking a mass processing job in SOP/flexible planning (Transaction MC8I), in the log error message "Activity and COPA profile have different planning versions?
Or planned/actual indicator in the COPA profile?
Version should be        A00
Please check the MC8S. Then an Avtivity in MC8T
after you create the job in MC8D with the acitivity you have defined for your info structure.
After that check in MD62 for plan value.
Regards,
R.Brahmankar

Error in data upload from CRM to BI

Hi all,
Kindly help me with this error.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class
'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
caught nor passed along using a RAISING clause, in the procedure
"SMOX3_GET_DATA" "(FUNCTION)" .
Data Source - 0CRM_LEAD_H. Error occured in RSA3 , in CRM

Hi Anup,
Check OSS Note 857278 - Generating DataSources with BWA adapters returns errors.
I am pasting the content of the note here:
Symptom
When you generate new fields from BWA DataSources, the system issues an error message:
"DataSource cannot be generated"
This affects the DataSources that use the CRM_BWA_GET_DATA_WITH_ARC extraction module:
0CRM_COMPLAINTS_I
0CRM_LEAD_ATTR
0CRM_LEAD_H
0CRM_LEAD_I
0CRM_OPPT_H
0CRM_OPPT_I
0CRM_QUOTATION_I
0CRM_QUOTA_ORDER_I
0CRM_SALES_ACT_1
0CRM_SALES_ACT_I
0CRM_SALES_CONTR_I
0CRM_SALES_ORDER_I
0CRM_SRV_CODES
0CRM_SRV_CONFIRM_H
0CRM_SRV_CONFIRM_I
0CRM_SRV_CONTRACT_H
0CRM_SRV_IBASE_TRAN
0CRM_SRV_PROCESS_H
0CRM_SRV_PROCESS_I
Other terms
EEW, CRM_BWA_GET_DATA_WITH_ARC, 0CRM_COMPLAINTS_I, 0CRM_LEAD_ATTR,
0CRM_LEAD_H, 0CRM_LEAD_I, 0CRM_OPPT_H, 0CRM_OPPT_I, 0CRM_QUOTATION_I, 0CRM_QUOTA_ORDER_I, 0CRM_SALES_ACT_1, 0CRM_SALES_ACT_I, 0CRM_SALES_CONTR_I, 0CRM_SALES_ORDER_I, 0CRM_SRV_CODES,
0CRM_SRV_CONFIRM_H, 0CRM_SRV_CONFIRM_I, 0CRM_SRV_CONTRACT_H, 0CRM_SRV_IBASE_TRAN, 0CRM_SRV_PROCESS_H, 0CRM_SRV_PROCESS_I
Reason and Prerequisites
To determine whether you had BWA or SAPI DataSources, only SMOX3_GET_DATA was checked for, since up to now the usage of CRM_BWA_GET_DATA_WITH_ARC was unknown.
Solution
Import Support Package 04 of SAP_ABA 7.0, Support Package 14 of SAP_ABA 6.40 or Support Package 54 of SAP_ABA 6.20 or implement the specified advance correction.
When you implement the advance correction for SAP_ABA 6.20, bear in mind that Note 605469 is a prerequisite for this release.
After you implement this note, also implement Note 996352, so that the system will use the correct extractor.
Bye
Dinesh

Error in Data updation From ODS TO CUBE

hello Experts
We are working on BW 3.5
for FI GL line items we are loading the data to ODS and than to Cube.
earlier there was a process chain failure 2 months back so delta were stuck for 2 months now about 10 million records have been uploaded in ODS but when i am tryint to upload these records to CUBE via delta upload its giving Error
Value 'Ã
Â ABC100711396 ' (hex. 'C30DC2A04C4344313030373131333936 ') of characteristic 0REF_DOC_NO c
i would like to know how to correct this and from where this error is coming as the same data is loaded to ODS and there its OK and secondly as there is no PSA bw ODS and Cube Do i need to delete the request and upload again
what if same error appears again should i write a start routine in update rule Between ODS and CUBE for special characters
thanks for replies

Hi,
Goto All Elementary Tests in RSRV
Goto Master data
Select the required test
Select your Infoobject
Execute the test
You will get the result with errors or no errors
If you get errors, then you click "Correct Error" button.
Regrds,
Suman

CUNIT error in data loading from flat file after r/3 extraction

Hi all
After R/3 business content extraction, if i load data from flat file to info cube, I am getting Conversion exit CUNIT error, what might be the reason, the data in the flat file 0unit column is accurate, and mapping rules are also correct, but still i am getting error with CUNIT.?

check your unit if you are loading amount or quantities what mapping you have and what you are loading from flat files.
BK

BP Data replication from CRM to R/3

Hi All,
I could not see the BP replicated to R/3. The status is processing for 'BUPA_MAIN' type of BDOC.
-I have set RFC (not trusted RFC)
- At PIDE
CRM->R/3 [ type A (classification) is mapped to 0001 (Account group)]
and vice versa.
Waiting for any sugessions.
Regards,
Eddie

Hi,
Admin console (subscriptions based on rep.objects & publications) is for the CRM outbound process, based on CRM changes -> cannot be used for the initial load.
The download objects can be used for initial loads, and this in three directions: CRM-> R/3, R/3-CRM and CRM->MSA. If you wish to download data from CRM to R/3, select CRM as the source site and R/3 as the destination site in an initial load.
Normally if your RFC settings and filters are defined corrrectly, you should get an indicator that the download is in a running state. After that you can check the queues (smq1 & smq2) and the bdocs (smw01) for the results of the download.
hope this helps,
Michael.

Error updating data source from SQL Server ODBC into SQL Native Client 10.0

I am converting Crystal 8.5 reports into Crystal XI release 2. The data source was ODBC using SQL Server 2000 and pointing to a stored procedure. In the new server the data source has to be ODBC again, but it uses the SQL Native Client 10.0 Driver, because the new server is SQL Server 2008. I have copied the same old stored procedure on the new server and it works fine as a data source to a brand new Crystal XI report. But when I am opening an existing 8.5 version crystal report and updating the data source to the new location I get the error message "Some tables could not be replaced, as no match was found in the new data source".
I thought I could tackle this error by creating a temporary data source using the standard ODBC SQL Driver linked to the SQL 2008 Server instead of the SQL Native Client 10 ODBC. So I first updated the crystal data source to link to this temp ODBC using SQL Driver and it worked fine. But after that, when I try to update the data source to link to the SQL Native Client 10 ODBC, I get the same error again.
So I guess that the problem is not the new server itself, but the switch between SQL Server ODBC and SQL Native Client 10 ODBC.
Does anyone know what's going on with this SQL Native Client 10 in updating crystal report data sources?

CR XI does not support that driver. Try selecting the Native driver or upgrade to CR XI R2 for free and use SP4, 5 and 6 and then FP 6.4 or upgrade to CR 2008 and SP 3 and Fix Pack 3.3
Thank you
Don

Error in Data Replication from R3

Similar Messages

Maybe you are looking for