Error in data Selection

Hi experts,
I have added a field to 0emp_attr data source using DS enhancements, when trying to extract with full the job is getting failed stating " error in data selection".

Hi,
Just see following thing
1. Try to extract data in R/3 in RSA3 transaction.If it is working correctly no issue
2. If RSA3 throw issue check the definition of your code and try to debug it.
3. If RSA3 is fine check your Infopackage selection settings if it is ok or there is any error,If there is any selection try to remove it and load data.
Thanks and regards

Similar Messages

Cube to Cube "Error in data Selection" plz help

Hi this is Ajay Reddy
when am sending data from Cube to Cube am getting an error
"Error in data Selection" plz help

Hi,
It needs a Note implementaion. I got similar problem in version BIW 7 and SP 11. We got the solution with on of the note . I am not able to recollect the note number.
Any way check the notes 920971,155471 may help you or not.
With rgds,
Anil Kumar Sharma .P

"Error in data selection" while loading

hi,
while loading data from one ODS to another(datamart) I, after extraction of some data packages successfully I m getting an error:"Error in data selection"
i saw its help messages were
1)error 7 when sending an idoc
2)sql error in accessing table no 13
3)error in source system
in the source ods i have loaded thru init from R/3..
please help

Hi,
Take a look on the cosulting note : 610938.
In place of R/3 system you have to consider BW itself when you are reading the note.
With rgds,
Anil Kumar Sharma .P

Error in data selection of Infopackage

Hi,
My infopackage is failing with "Error in data selection". RSM 340 is the error message number.
Datasoucre: 0FI_AP_4
I have checked
1. Timestamp--consistent
2.Reactivated and replicated datasource
3.Checked SM58 in both BW and source systems and found it OK
I have taken Source jobs for 1 succesfull infopackage run and 1 unsucessfull infopackage run.
I see that Job log for unsucessfull has no call to customer enhancement and no data selection is done thereby.
i am attaching the job logs for 1 successful and 1 unsuccessful case. Please check and let me know the gap that is contributing to this error.

Hi nayab,
You and harish works at same location?
i seen same issue from harish as well.
http://scn.sap.com/thread/3578278
Thanks

Error in Data selection in R/3 Generic Extraction Using function Modules

Hi Friends,
I have created a a generic data source using function module to load data from PA0000 and PA0001 Tables ,Function module is working fine when i execute it indipendently and the data source is also working fine when i extract data using RSA3. it is showing correct no of records 157.
When loading data into DSO from BW (using 3.x/7.0 flows) data is comming to PSA all 157 records but in the RSMO the load status is showing yellow when i look into the step by step analysis it is
data selection successfully started
Data selection successfully ended
All Data packets completed.
are showing in red.
after and hour time load getting failed and in the error message it is showing " job terminated in source system---> Request set to red"
it is giving this message wir no RSM 78.
Please let me know it

Hi Jerry,
Thanks for the immediate replay
But here in my source system job is getting terminated.
this is the status of job in Job logs.
the job is running till this step not going ahead.
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 157 records
Result of customer enhancement: 157 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 301 records
Result of customer enhancement: 157 records
Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
pl. update me if any idea.

Error while data selection against 0Material_attr

Dear Gurus,
My Inventory Process Chain has one "0Material_attr" component which is failing constantly citing reasons "Error occurred in the data selection . An error occurred in the source system.The error occurred in Service API ."
Could someone kindly guide me.
Thanks
Sheeja

Hi
Check the DS at Source system/ REplicate the same at BI if needed and Activate TRules again / try to upload
https://service.sap.com/sap/support/notes/366222
https://service.sap.com/sap/support/notes/501053

MEIS - MEssage 'No data selected' after changes in VEFU

Dear Gurus,
While doing the Intrastat reporting, we have the Statistical value as 0 in some of the documents.
The client's requirement is to populate a value in this field.
So, they are trying to use the Transaction VEFU to insert a statistical value for such PO's.
But, after doing this, when we go back to the transaction MEIS & regenerate the report in update mode (Using Log Type B) , it gives the message 'No data selected for this time period'.
Can anyone please suggest the reason for this & how to resolve this?
Thanks
Ritu

Hi all,
I found a very strange behaviour when reversing Account Maintenance Document.
After posting Account Maintenance using MR11. I used ME23N to view the Account Maintenance document and double click it to get to MR11SHOW. Here I reversed the document. But if i execute MR11 again it prompts out the error "No data selected".
Another scenario is to use execute MR11SHOW directly and reverse the Account Maintenance document. Here I am about to use MR11 to post the document again....
It seems the behaviour for reversing is different by using ME23N and MR11SHOW, which is weird...

No data selected for printing message no 8I000

Dear All
At the time of printing J1INCHLN certificate getting error NO DATA SELECTED FOR PRINTING MESSAGE NO 8I000 , where we have data in vendor's A/C and TDS is deducted at vendor's A/C .
Some vendor under the same section allow us to print the certificate, but the in case of few vendors we r
facing the problem.
As we need to send the same to vendors help is needed.
VG.

we sorted out the issue

No data selected for printing in production server t.code J1INCERT

Dear Gurusl,
I am facing a issue to tds certificate printout through t.code J1INCERT in production server. My client has booked the invoice in the month of march 2011 & remittance, bank updation is done in the month of 30th Apr. 2011. But while taking the printing out it the error No data selected for printing 8000I. So I need some permanent solution.
For invoice booking fiscal year is 2010 & remittance, bank updation it is 2011.
Regards
Sachin Patil

Dear:
Check whether you have selected the relevant tax types for invoice posting while posting the vendor invoice. If its correct then Vendor Master data, Section/Business Place code Address data. Check tables in SE11
J_1IEWT_CERT_N
J_1IEWTCALID_N
J_1IEWTNUMGR_N
In these tables section codes might have been maintained directly. Please check these for any discrepancies.
Regards

Error occurred in the data selection

Hi Expert,
I met issue when full loading data from R3 via customized datasource.
the error message in request monitor is:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
I checked in RSA3, the data extraction is successful, but in BW, when execute the infopackage with or without data selection, both failed due to the same error.
I also checked the background job in SM37 in source system, the background BI* completed successfully, and the IDoc in both BW and source system processed successfully.
I also tried to replicate datasource and activate is using RSDS_DATASOURCE_ACTIVATE_ALL, delete infopackage and recreate it. but seems all this didn't work.
Could u pls tell me how to solve this issue? Thanks.
Eileen

Hello Eileen zhang,
I have exactly the same error as you, do you still remember how did you solved this problem?
Regards,
Thanks,
Maria João
Error message:
"Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request."

Error occurred in Data selection

Hi All,
We have a delta load step for 0FIGL_O02 in one of our Process chains.This step failed with an error message-
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
On getting into monitor , the Status tab says" Error occurred in Data Selection".
Message text is :
Delta request REQU_D5XVIKL0GSIIZAWDIOB9HIOOQ is incorrect in the monitor
A repeat needs to be requested
Data target 0FIGL_O02 still includes delta request REQU_D5XVIKL0GSIIZAWDIOB9HIOOQ
If the repeat is now loaded, then after the load
there could be duplicate data in the data targets
Request the repeat?
Please advise.
Thanks,
Shweta

Hi
Repeat delta is only available in case of transaction Data source.
For transaction datasource system stores two fields
1. Last delta
2. Repeat Delta.
In case we set request status not ok and save the status, BW System udpates the repeat delta field and thus for next data extraction system marks the request diff. as repeat delta and starts from Repeat delta field value instead of Last delta.
In case of normal delta request from BW system takes Last delta fields into consideration.
Hope the below link will be clear in getting
/people/aaron.wang3/blog/2007/04/11/repair-bad-data-and-subsequent-data-targets-with-delta-update
Many thanks
Kiran

Error occured in data selection!

Hi,
data request was failed in my case when i schedule the data .
in details tab of monitor screen , under extraction it is saying " error occured in data selection".
while scheduling, i had given only one selection range of the many available fields.
is it mandatory that we should select all the available selection values?
can any body here tell me what could be the problem?
Ravi

This would occur when corresponding job of BW is running at R/3 side.
How to identify that ?
1] find sm37 of BW job.
2] double click the job, click on 'job details' from tool bar.
3] from the pop up screen, note down the server and job id.
4] log in to R/3, tcode SM51. Double click the server which is mentioned in above step.
5] a list of running job would appear, find the job from job id as in step 3. double click that and clikc on cancel program to kill the job.
NOTE - if the job is already over then it would not appear in list..
now you can repeat the load.
this works, i have tried it.

Error occurred in the data selection,If i do Repeat, then it is working fin

Hi Freinds,
Here is the error message,
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Details Tab:
Extraction (messages): Errors occurred
Error occurred in the data selection ....
If i do Repeat Delta, then it is working fine.
As it is a daily load, manually repeating the load from the past 10 days.
Have tried using program RS_TRANSTRU_ACTIVATE_ALL.
Any inputs pls.....

Hi Friends,
Thanks for your valuable inputs, Problem is solved.
The Reason is that, there is a time difference in the r/3 system and bi system.
The tolerable time differene shud be only 60 seconds.
Basis guys took down time at the OS level and hav made the timers sync.....
The problem is on the source system GNP time differences
persists, which can cause the problem with delta upload .
Universal Time Coordinated UTC....: 1291187626
Date and time of database.........: 01.12.2010 12:46:59
Date and Time of R/3-Kernel.......: 01.12.2010 12:43:46
Date and Time of ABAP-Processor...: 01.12.2010 12:46:58
ABAP Time zone Setup ..............: 19800
Date and Time / local time ........: 01.12.2010 12:43:46
This leads to an exception of the delta processing, because this
tolerates a deviation of 60 seconds only (When the repeat is processed,
the "local time" in the ABAP is higher than the qrfc counter at the time when the delta was processed -> So a repeat works fine).
Please synchronize the timers like described in attached note 101726 and 741734 to eliminate the time difference .
With Regards
Badri Thiriveedhi.

Error occured in the data selection while extract data from Source system

Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With error

Hi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star

Runtime Error during Phase Start Data Selection

Hello Forums,
We are using TDMS (2006_1_700) to extract a year's worth data from one client into a new client on the same ERP EhP4 system.
All the systems - central, sender and receiver are at the same DMIS levels(SP16) and all necessary notes have been applied.
During the Step 'Start Data Selection' of the Data Transfer Phase, we see around 60 of the ~12000 sub tasks abort with the below error:
Batch job for access plan calculation in sender system ended with errors
Message no. DMC_UTIL_MSG021
Diagnosis
The access plan calculation was executed as a background job in the sender system. In this background job, an error occurred.
Procedure
Check if a short dump occurred in the sender system while the access plan was calculated. If existing, this short dump contains further information about the cause of the problem.
A frequent error is that selection criteria for data reduction (for example selection groups) are wrongly defined which causes the database access that consideres these selection criteria to fail.
The corresponding dump in the Sender system is as below:
Runtime Errors         SAPSQL_WHERE_PARENTHESES
Exception              CX_SY_DYNAMIC_OSQL_SYNTAX
Error analysis                                                                                |
|    An exception occurred that is explained in detail below.                                      |
|    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not                |
|     caught in                                                                                |
|    procedure "/1CADMC/DMCACS00P000000001" "(FUNCTION)", nor was it propagated by a               |
|     RAISING clause.                                                                              |
|    Since the caller of the procedure could not have anticipated that the                         |
|    exception would occur, the current program is terminated.                                     |
|    The reason for the exception is:                                                              |
|    The current ABAP program has tried to execute an Open SQL statement                           |
|    which contains a dynamic condition. The part of the condition specified                       |
|    at runtime is incorrectly parenthesized.
Please suggest in case any of you have encountered similar error and possible resolution.
Thanks in advance,
Srikishan

Hi Suman,
Thanks a ton. I somehow missed this when searching on the SMP.
I will implement the steps and post it back by tomorrow.
Regards,
Srikishan

Error in data Selection

Similar Messages

Maybe you are looking for