Error in Data Services tutorial
In the "Before You Begin" section of the Flex Data Services
tutorial in "Getting Started with Flex", the first bullet is
incorrect. It text should be:
"Ensure that you have installed the Flex Data Services Beta 3
release and that you can run the applications in the samples web
application."
The installation instructions are located here:
http://www.adobe.com/go/flex2_installation
The tutorial zip file is located here:
http://www.macromedia.com/go/flex2beta1_quickstart_tutorial_zip
- Mike Peterson
Adobe Flex documentation team
Just a slight correction...
>
Niels Weigel wrote:
> You need to have a subscribtion to the US Address Directories, as they are not free of charge.
>
> You can download them on the SAP Support Portal --> Downloads --> SAP Installations & Upgrades
> Choose Entry by applications on the left hand navigation
> Choose SAP BusinessObjects packages and products
> Go to the last Entry Address Directories
> Go to BOBJ ADDR DIR US
> Go to BOBJ ADDR US 2004-2008
> Go to Installation
> Choose Download Tab
> Choose BOBJ ADDRESS DATA - UNITED STATES 2004-2008 CASS MAY-09 (EXE for Win, TGZ for Unix) if you are using Data Services XI 3.x
>
> You will get there only if you have a license for the Address Directories - USA.
>
> Niels
The 2009 CASS version will not be used until the Data Services XI 3.2 release.
Thanks,
Brandon
Similar Messages
-
Flex Data Services tutorial error
In the "Before You Begin" section of the Flex Data Services
tutorial in "Getting Started with Flex", the first bullet is
incorrect. It text should be:
"Ensure that you have installed the Flex Data Services Beta 3
release and that you can run the applications in the samples web
application."
The installation instructions are located here:
http://www.adobe.com/go/flex2_installation
The tutorial zip file is located here:
http://www.macromedia.com/go/flex2beta1_quickstart_tutorial_zip
- Mike Peterson
Adobe Flex documentation teamHi, I found some more "issues" with these data services
tutorial.
First of working with the notes example at first I couldn't
get the two browsers to talk to eachother until I found this
comment by funk_sf on the livedocs:
quote:
after some searching, I located a link to the tutorial.zip
here:
http://www.macromedia.com/go/flex2beta1_quickstart_tutorial_zip.
i unzip'd the contents into my samples directory so that I had the
following path: C:\fds2\jrun4\servers\default\samples\tutorials
the xml file in WEB-INF for the standalone flexbuilder 2b3 is
located at C:\fds2\resources\config as mentioned in the comments on
the previous page (
http://livedocs.macromedia.com/labs/1/flex20beta3/00000129.html)
as for creating the tutorial1.mxml file, i created a new Flex
project with the following settings (this is from memory, so
hopefully i recall all the steps right):
File->New Flex Project
How will you flex application access data? -> Flex Data
Services -> Compile application locally in Flex Builder
root folder: C:\fds2\jrun4\servers\default\samples
root url:
http://localhost:8700/samples/
I left the build paths to their defaults (ie. blank)
named the main application file: tutorial1.mxml
output folder: tutorial
output folder url: [blank]
So I followed his advice, deleted my project and made it in
the samples directory and the notes application started to work, so
all appeared good.
Until I was making the Java example and I'm now faced with
the following errors:
Severity Description Resource In Folder Location Creation
Time Id
2 Definition samples.contact:Contact could not be found.
tutorial2.mxml Tutorials line 8 6 juni 2006 16:36:25 20
Severity Description Resource In Folder Location Creation
Time Id
2 Type was not found or was not a compile-time constant:
Contact. tutorial2.mxml Tutorials line 13 6 juni 2006 16:36:25 21
I'm not sure what is happening, I think it can't find the
data service files but I don't know how to make it so that it does
find those files, the manual is still a bit vague on that and when
I try to run this application it just shows a blue (flex) screen.
The code I'm using is straight from the example documentation after
tinkering around for 2 days to get this to work I thought using
original code is the best way to go.
My application tries to run from
http://localhost:8700/samples/bin/tutorial2.html
The documentation states:
Open the following URL in two browser windows:
[L=http://localhost:port/samples/tutorials/tutorial2.mxml
The screenshots in the documentation show:
Window1: /tutorial/tutorial1.mxml
Window2: /dataservice/contact/tutorial_step4.mxml
Now I'm just confused, tutorial1.mxml is my notes application
which was the previous tutorial and there was no mention of a
tutorial_step4.mxml file ?
Someone help me please with where to place these files and
why so I can understand what is happening here.
Thanks :) -
Not able to login to Gtalk - Error messgae: Data Services unavailabl​e
Model: 9860
OS: 7.1.0
Gtalk: 3.0.0.23
Active connection during issue: Wi-fi
Mobile Service: Vodafone
When ever I try to login, I get this error message: Data Services Unavailable. All the time i try to login, I am active on wi-fi connection. Please help on following:
1. Is there a way to make wi-fi connection as primary/default internet access point and not data/3G services
2. How to make gtalk work on wifi connection without data/3g plan.Now that I have data plans activated, Gtalk is working.. it would have been good to have some IM apps work with WiFi connectivity...
-
"Error 3000: Data Service is unavailable" error message (Web)?
Ever since I got my Palm, I've had difficulty getting on the web.
It says: "Connecting to Broadband Access" but then an error message box appears saying: "Service Connection Progress: Error 3000: Data service is unavailable".
I then have to soft reset every single time, and then I am able to access the internet just fine.
Is something wrong with my Palm? This is a brand new Palm I purchased through Verizon in June.
What can I do to fix this issue, without having to soft reset every time I want to access the internet?
Post relates to: Treo 700p (Verizon)I have the same error (and other errors too) with my 700P from Verizon. This is what I have found with playing. All can be repeated.
1) If I turn off phone radio then turn back on I can browse the web all day long, I can send MMS messages, I can check my email, etc. All relating to the "data" portion of the Verizon service. No Problems. But.........
2) As soon as I make a call (use the "voice" portion of the Verizon service) and then try to do one of the following above mentioned I get all kinds of ERRORs depending on the specific program I'm in/trying to use. No matter what.... error, error, error, bla, bla.
3) I can turn the phone radio of then back on and all works fine "data" wise until I make another call.
4) Note, you don't have to do a soft reset or take the battery out to get it to begin working again, just turn the phone radio off then back on.
I HAVE DONE THIS AND CAN MAKE IT REPEAT EVERY TIME WITH THE PHONE FRESH OUT OF THE BOX OR AFTER PERFORMING A HARD REST or with all normal apps installed. Does not matter.
Some other tid bits of info....
1) It appears to not matter what city I am in. The problem is the same as discribed above. Confirmed cities are: Atlanta-GA, Savannah-GA, Memphis-TN, Columbia-SC, Bristal-TN.
2) It appears to ALWAYS happen on the "EDVO" network as the "EV" is always showing on the phone screen. Have not been able to try in an area with out the EV, aka the 1x area.
This PROBLEM of course is a MAJOR pain in the rear. I have called Verizon tech support about the problem multiple times. Eash time they said they had no "record" of me calling about the problem documented in their computer. The first tech said it was my software causing the problem and to do a hard reset and don't load the problem software back on (even though I already told him I did that). The next tech said it was a currpted file and to do the hard reset and reinstall and all would be fine (even though I already told him I did that) and said to trust him, he see this all the time. The next tech said the phone was bad and FedEx'd me a new phone. It did the samething right out of the box as described above. The last tech said they need to "re-provisioned" my phone and said that would fix the problem. So she did something on her end then told me to "program my phone" doing the *228, option 1. Still does it. No correction to the problem. -
Dear Experts,
I have downloaded data services blue prints availalbe in the SAP network and i imported the ATL file successfully. I have reconfigured my target datastore.
When i try to execute the Job_DqBatchUSA_AddressCleanseob , I'm getting the following error.
Im trying to learn quality transforms. Please guide me.
Error :
Job name: Job_DqBatchUSA_AddressCleanse
(12.1) 02-01-07 16:42:17 (W) (4016:5364) VAL-030910: |Session Job_DqBatchUSA_AddressCleanse
Transform <USARegulatoryNonCertified_AddressCleanse>:Option Error(Option: NON_CERTIFIED_OPTIONS/DISABLE_CERTIFICATION): PSFORM 3553 will not be generated because some Non-Certified options are enabled.
(12.1) 02-01-07 16:42:18 (W) (4912:3060) VAL-030910: |Dataflow DF_DqBatchUSA_AddressCleanse
Transform <USARegulatoryNonCertified_AddressCleanse>:Option Error(Option: NON_CERTIFIED_OPTIONS/DISABLE_CERTIFICATION): PSFORM 3553 will not be generated because some Non-Certified options are enabled.
(12.1) 02-01-07 16:42:19 (E) (4912:3596) DQX-058306: |Dataflow DF_DqBatchUSA_AddressCleanse|Transform USARegulatoryNonCertified_AddressCleanse
Transform <USARegulatoryNonCertified_AddressCleanse>: WRONG DIRECTORY - Invalid City directory..
(12.1) 02-01-07 16:42:19 (E) (4912:3596) DQX-058302: |Dataflow DF_DqBatchUSA_AddressCleanse|Transform USARegulatoryNonCertified_AddressCleanse
Transform <USARegulatoryNonCertified_AddressCleanse>: DLL <uractransformu.dll> runtime function <PerThreadInit> failed with error <4>. More detailed information may be obtained from previous errors.
(12.1) 02-01-07 16:42:30 (E) (4016:5364) DQX-058302: |Dataflow DF_DqBatchUSA_AddressCleanse|Transform USARegulatoryNonCertified_AddressCleanse
Transform <USARegulatoryNonCertified_AddressCleanse>: DLL <uractransformu.dll> runtime function <PerThreadInit> failed with
error <4>. More detailed information may be obtained from previous errors.
Regards,
Dirasa.Just a slight correction...
>
Niels Weigel wrote:
> You need to have a subscribtion to the US Address Directories, as they are not free of charge.
>
> You can download them on the SAP Support Portal --> Downloads --> SAP Installations & Upgrades
> Choose Entry by applications on the left hand navigation
> Choose SAP BusinessObjects packages and products
> Go to the last Entry Address Directories
> Go to BOBJ ADDR DIR US
> Go to BOBJ ADDR US 2004-2008
> Go to Installation
> Choose Download Tab
> Choose BOBJ ADDRESS DATA - UNITED STATES 2004-2008 CASS MAY-09 (EXE for Win, TGZ for Unix) if you are using Data Services XI 3.x
>
> You will get there only if you have a license for the Address Directories - USA.
>
> Niels
The 2009 CASS version will not be used until the Data Services XI 3.2 release.
Thanks,
Brandon -
How to do an error in Data Services?
Hi guys!
I´m novice with Data Services. I have one question very simple.
I have a Query mapping with a SAP table and a flat file with information to do a WHERE clausule with the table. If my query does´t has any results, how can i do an error in log to abort the JOB?
For example:
Error 1001: The Query doesn´t find the variable BURKS.
Thanks!!
Edited by: Albertoe on Dec 21, 2010 6:48 PMThis example checks the BUKRS field. If the field is not empty then value is carried forward and the job continues to run. If the field is empty then an exception is raised and the job is terminated.
ifthenelse(length(BUKRS) > 0,
BUKRS,
raise_exception('The BUKRS field is empty.',
The message defined in the function will be written to the log file.
Paul -
Non Exceptions error in DATA SERVICES
Hello everyone.
Anyone know how I can reassign the ranges for error exceptions in Data Services ?. For example an error when deleting a file that does not exist on disk, throws code 50616, but the catch object can not monitor it because it is not within the exceptions.
How I can add exceptions to these groups, or, how I can monitor these errors as they occur ?.
Error handling in Data Services is very bad in my opinion.Do you have an example of how this would work with the catch all and a script? We are facing a similar issue where it seems our catch block is not catching all errors. In this case it appears to be a stored procedure that is missing.
(14.2) 09-09-14 07:08:50 (E) (9036:7600) DBS-070401: |Data flow DF_Subk_UpdateLetterContractData|Transform QRY_SP_TOUPDATELETTERCONTRACT-Function2 ODBC data source <10.25.34.140> error message for operation <SQLExecute>: <[Microsoft][SQL Server Native Client 10.0][SQL Server]Could not find stored procedure 'DBO.SP_UpdateContractLetterData'.>.
The job is erroring but in the catch block we are trying to call an RFC back in the ECC system to update the status (job was triggered from ECC) and it never reaches the catch block to do this. -
i have create a simple flex data services project and i am
getting error
Unexpected attribute 'url' found in 'endpoint' from file:
services-config.xml. helloworld
i am new in flex data service plz help meNot sure if you have already got the answer, use "URI" not
"URL". -
XML self referred nested element error in Data Services
Hi,
I am using BO Data services for data transfer. I am having an error while transferring data from xml file to database. Here is the scenario:
When i execute the job i get the error that an element "CategoryList" found in xml file but not found in the schema used to build the ETL plan.
i dig into that and found out that "CategoryList" is self referential. For example the CategoryList has a nested element Category, and Category has a nested element CategoryList; which makes CategoryList self referred indirectly. when i don't have this self referential mechanism the data transfer work fine with the same xml and xsd files.
Is there any special way to deal with this?
Thanks
UmerNot sure if you have already got the answer, use "URI" not
"URL". -
Error in Data service while executing Rapidmart job
Dear all
i am getting the following error :
(12.2) 06-29-11 02:35:13 (E) (3132:7104) DBS-070401: |Session Cost_Center_Load_SAP
ODBC data source <FGHSRV018> error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid
column name 'LOAD_DATE'.>.
(12.2) 06-29-11 02:35:13 (E) (3132:7104) RUN-050304: |Session Cost_Center_Load_SAP|Function AW_StartJob
Function call <sql ( RM_DS, insert into AW_JOBEXECUTION (NAME,
EXTRACTLOW, EXTRACTHIGH, STATUS, LOAD_DATE) values ('Cost_Center_Load_SAP', '1990.01.01',
'2011.06.29', 'started',CONVERT(datetime,'2011.06.29 02:35:13',102)) ) > failed, due to error <70401>: <ODBC data
source <FGHSRV018> error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid column
name 'LOAD_DATE'.>.>.
(12.2) 06-29-11 02:35:13 (E) (3132:7104) RUN-050304: |Session Cost_Center_Load_SAP
Function call <AW_StartJob ( Cost_Center_Load_SAP, RESET, FIRST, 1990.01.01, 2011.06.29, 2011.06.29 02:35:13 ) > failed, due to
error <70401>: <ODBC data source <FGHSRV018> error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver][SQL
Server]Invalid column name 'LOAD_DATE'.>.>.
(12.2) 06-29-11 02:35:13 (E) (3132:7104) RUN-053008: |Session Cost_Center_Load_SAP
INFO: The above error occurs in the context <|Session Cost_Center_Load_SAP|AW_StartJob(...) Function Body|10 If Step
body|$ret=...|sql(...) Function Body|>.
(12.2) 06-29-11 02:35:13 (E) (3132:7104) DBS-070401: |Session Cost_Center_Load_SAP
ODBC data source <FGHSRV018> error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid
column name 'LOAD_DATE'.>.
Please help me to resolve the same .Hi,
this services is for the SAP Integration Kit. I would suggest you post this into the EIM Forums
regards
Ingo Hilgefort -
Error in Data service while executing Rapidmart
Dear all
i am getting the following error :
(12.2) 06-29-11 02:35:13 (E) (3132:7104) DBS-070401: |Session Cost_Center_Load_SAP
ODBC data source <FGHSRV018> error message for operation <SQLExecute>: <MicrosoftODBC SQL Server DriverSQL ServerInvalid
column name 'LOAD_DATE'.>.
(12.2) 06-29-11 02:35:13 (E) (3132:7104) RUN-050304: |Session Cost_Center_Load_SAP|Function AW_StartJob
Function call <sql ( RM_DS, insert into AW_JOBEXECUTION (NAME,
EXTRACTLOW, EXTRACTHIGH, STATUS, LOAD_DATE) values ('Cost_Center_Load_SAP', '1990.01.01',
'2011.06.29', 'started',CONVERT(datetime,'2011.06.29 02:35:13',102)) ) > failed, due to error <70401>: <ODBC data
source <FGHSRV018> error message for operation <SQLExecute>: <MicrosoftODBC SQL Server DriverSQL ServerInvalid column
name 'LOAD_DATE'.>.>.
(12.2) 06-29-11 02:35:13 (E) (3132:7104) RUN-050304: |Session Cost_Center_Load_SAP
Function call <AW_StartJob ( Cost_Center_Load_SAP, RESET, FIRST, 1990.01.01, 2011.06.29, 2011.06.29 02:35:13 ) > failed, due to
error <70401>: <ODBC data source <FGHSRV018> error message for operation <SQLExecute>: <MicrosoftODBC SQL Server Driver[SQL
Server]Invalid column name 'LOAD_DATE'.>.>.
(12.2) 06-29-11 02:35:13 (E) (3132:7104) RUN-053008: |Session Cost_Center_Load_SAP
INFO: The above error occurs in the context <|Session Cost_Center_Load_SAP|AW_StartJob(...) Function Body|10 If Step
body|$ret=...|sql(...) Function Body|>.
(12.2) 06-29-11 02:35:13 (E) (3132:7104) DBS-070401: |Session Cost_Center_Load_SAP
ODBC data source <FGHSRV018> error message for operation <SQLExecute>: <MicrosoftODBC SQL Server DriverSQL ServerInvalid
column name 'LOAD_DATE'.>.
Please help me to resolve the same .Dear Jeff,
As you have suggested,i had created the column in the data base and the error went away.
but the another error has stuck me .
12.2) 06-30-11 22:52:00 (E) (2844:7664) DBS-070401: |Session Cost_Center_Load_SAP
ODBC data source <FGHSRV018> error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid
object name 'AW_FIRST_RUN_DATE'.>.
(12.2) 06-30-11 22:52:00 (E) (2844:7664) RUN-050304: |Session Cost_Center_Load_SAP|Function RM_PutFirstRunDate
Function call <sql ( RM_DS, SELECT COUNT(*) FROM AW_FIRST_RUN_DATE WHERE JOB_NAME = 'Cost_Center_Load_SAP' AND JOB_LOAD_TYPE =
'FIRST' ) > failed, due to error <70401>: <ODBC data source <FGHSRV018> error message for operation <SQLExecute>:
<[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'AW_FIRST_RUN_DATE'.>.>.
(12.2) 06-30-11 22:52:00 (E) (2844:7664) RUN-050304: |Session Cost_Center_Load_SAP
Function call <RM_PutFirstRunDate ( Cost_Center_Load_SAP, FIRST, 2000.01.01 00:00:00, 2011.06.30 22:52:00, 2011.06.30 22:52:00
) > failed, due to error <70401>: <ODBC data source <FGHSRV018> error message for operation <SQLExecute>: <[Microsoft][ODBC SQL
Server Driver][SQL Server]Invalid object name 'AW_FIRST_RUN_DATE'.>.>.
(12.2) 06-30-11 22:52:00 (E) (2844:7664) RUN-053008: |Session Cost_Center_Load_SAP
INFO: The above error occurs in the context <|Session Cost_Center_Load_SAP|8 If Step body|RM_PutFirstRunDate(...) Function
Body|Assignment Step 2 $ROWCOUNT=...|sql(...) Function Body|>.
(12.2) 06-30-11 22:52:00 (E) (2844:7664) DBS-070401: |Session Cost_Center_Load_SAP
ODBC data source <FGHSRV018> error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid
object name 'AW_FIRST_RUN_DATE'.>.
I already checked the table in my target database and it isnt there .
so how to overcome with this ???
shld i re-install DS again ??
Thanks.
Edited by: Rakesh Barthwal on Jun 30, 2011 9:57 PM -
Error in Data service while executing Inventory_Load_SAP Rapidmart
Dear All,
Please help me to resolve the following error ,
7196:6724) PAR-010102: |Session Inventory_Load_SAP
Syntax error at line <1>: <>: near <'> found <a decimal> expecting <ALL, CONVERT, DOUBLE, *, <>, a string, SYSTEM>.
1 error(s), 0 warning(s).
Check and fix the syntax and retry the operation.
(12.2) 07-14-11 00:28:54 (E) (7196:6724) PAR-010202: |SESSION Inventory_Load_SAP
Error parsing global variable values from the command line: <$G_CCODE= '*';$G_DEFAULT_DATE= '1900.01.01';$G_DEFAULT_NUMBER=
-1;$G_DEFAULT_TEXT= '?';$G_EDATE= sysdate();$G_LANGUAGE= 'E';$G_LOAD_DATE= to_date(to_char(sysdate(),'yyyy.mm.dd
HH24:mi:ss'),'yyyy.mm.dd HH24:mi:ss');$G_LOAD_TIME= to_char(systime(), 'HH24:MI:SS');$G_LOAD_TYPE= 'FIRST'';$G_RUN_MODE=
'RESET';$G_SDATE= '2000.01.01';$A= 30;$B= 60;$C= 90;$D= 120;$E= 14;$F= 30;$G= 45;$G_EXCHANGE_TYPE_ID= 'M';$G_GLOBAL_CURRENCY=
'USD';$G_INT_ORDER_CATEG_PP= '10';$G_INT_ORDER_CATEG_PS= '20';$G_ADDRESS_VERSION= ' ';$G_BUS_PARTN_SDATE= (sysdate() - 8
);$G_BUS_PARTNER= ifthenelse(day_in_week(sysdate())=7,'Y','N');$G_COST_OF_SALES_LEDGER_ID= '0L';$G_COUNTRY_GRP=
'10';$G_DEL_PERIOD= to_date((sysdate() - 180),'YYYY.MM.DD');$G_DEL_REJECT_REASON= 'DD';$G_DROP_SHIP=
'Y';$G_GL_ACCOUNT_HIER_NAME= '@GL';$G_GL_SUM_PLAN_LEDGER_ID= 'L6';$G_GL_VERSION= 'OLD';$G_HIRE_ACTION_01=
'01';$G_HIRE_ACTION_02= '90';$G_HIRE_ACTION_03= 'K1';$G_INIT_HIST_CHG= 'Z';$G_MALFUNCTION_CAUSE= '5';$G_MALFUNCTION_DAMAGE=
'C';$G_MALFUNCTION_OBJ_PART= 'B';$G_MRP_RESULTS_DELETE= 'N';$G_ONTIME_DELIV_WINDOW= 15;$G_PC_ACCOUNT_HIER_NAME=
'@PC';$G_PROFIT_CENTER_LEDGER_ID= 'L5';$G_REHIRE_ACTION_01= 'JD';$G_REHIRE_ACTION_02= 'N7';$G_RETIRE_ACTION=
'ZP';$G_SCHOOL_TYPE= '50';$G_SERVICE_INTERVAL_01= 6;$G_SERVICE_INTERVAL_02= 12;$G_SERVICE_INTERVAL_03=
36;$G_SERVICE_INTERVAL_04= 60;$G_SERVICE_INTERVAL_05= 120;$G_TABLE_EQUIPMENT= 'EQUI';$G_TABLE_FUNCTL_LOCATN=
'IFLOT';$G_TASK_TYPE_PROBATION_END= '01';$G_TERMINATION_ACTION= '10';$G_VALID_DATE= to_date(sysdate(),
'YYYY.MM.DD');$G_WAGE_TYPE_01= '/101';$G_WAGE_TYPE_02= '/110';$G_WAGE_TYPE_03= '/401';$G_WAGE_TYPE_04= '/403';$G_WAGE_TYPE_05=
'/404';$G_WAGE_TYPE_06= '/405';$G_WAGE_TYPE_07= '/406';$G_WAGE_TYPE_08= '/410';$G_WAGE_TYPE_09= '/441';$G_WAGE_TYPE_10=
'/550';$G_WAGE_TYPE_11= '/560';$G_WAGE_TYPE_12= '/5U0';$G_WAGE_TYPE_13= '/5U1';$G_WAGE_TYPE_14= 'MI10';$G_WAGE_TYPE_15=
'/102';$G_WAGE_TYPE_16= '////';$G_WAGE_TYPE_17= '////';$G_WAGE_TYPE_18= '////';$G_WAGE_TYPE_19= '////';$G_WAGE_TYPE_20=
'////';$G_WORKDAY_EDATE= '1994.01.01';$G_WORKDAY_SDATE= '2006.12.31';$G_MAX_DATE= '9999.12.31';>. Please check the syntax and
try again.
Thanks in Advance.Looks like an error in a script object. Using the validation functionality with the script object open should allow you to find the error. You may need to play the "comment-out the lines" game to find the culprit(s).
Best wishes,
Jeff Prenevost -
Data Services ORA-00942 table does not exist. Source/Target same DB
Error: u201CORA-00942: table or view does not existu201D
Source & Target Datastores in same Oracle DB but different User/Schemas.
I set up the Data Services Tutorial Source & Target Data bases in ONE Oracle DB using a separate User/Schema for the ODS source DB & TARGET Source DB.
I then created
- Source datastore for the ODS DB User/schema
- Target datastore for the TARGET DB user/Schema.
I have no problem reading flat files & writing to TARGET datastore tables.
However, when I read the ODS datasttore source table CUSTOMER & write to the TARGET datastore target table CUST_DIM I get an error: ORA-00942: table or view does not exist.
I can query the table contents from the Data Flow & see the data in the source data & see the empty target table.
So the tables exists & there is no security issues from the DS Designer.
I did find note 1189910 - ERROR: Error Description: An error occurred while creating the result data - Data Insight XI
Cause
Multiple engines are being run against the same metadata repository.
Resolution
Verify that only one engine is being run against a single metadata repository.
Has anyone seen this error?
Or has anyone created a 2 data stores on the SAME DB, but to different User/Schemas?
Thanks
Jay Roblesince you are accessing 2 schema which are on same oracle database, DS engine is trying to optimize and generating an INSERT INTO ... SELECT clause. Since its the same DB, DS Engine is doing a implicit linking of the datastores
you can see the SQL generated from the Designer, drill down into DF, from the Menu select Validation ->Display Optimised SQL
to disable this implicit linking, right click on the Dataflow, select properties
in the properties window, unselect the the option "use database links" -
Error while running a job in Data services
We are using Data services BO XI R3 tool.
We have created datastore for Oracle database 8i using Microsoft ODBC DSN. This is the source datastore.
When job is to pull the data from source to 10g target, we get the below error in log file:
25219 1 CON-120902 6/26/2009 Data services ODBC Driver Manager unable to find
data source <...> in $LINK_DIR/bin/odbc.ini file.
Is this a UNIX/Windows error?
Please let us know how this can be resolved.
Thanks in advance!I restart the jobserver and it work, for a moment :P, but now says more...
1. SQL submitted to ODBC data source <Prova7> resulted in error <[MySQL][ODBC 3.51 Driver][mysqld-5.0.77]No database
selected>.
2. The SQL submitted is <select VERSION, SECURITYKEY, GUID from AL_VERSION where NAME = 'Repository Version' >.
Cannot retrieve <Version> from the repository. Additional database information: <SQL submitted to ODBC data source
<Prova7>
3. resulted in error <[MySQL][ODBC 3.51 Driver][mysqld-5.0.77]No database selected>. The SQL submitted is <select
VERSION, SECURITYKEY, GUID from AL_VERSION where NAME = 'Repository Version' >.>.
SQL submitted to ODBC data source <Prova7> resulted in error <[MySQL][ODBC 3.51 Driver][mysqld-5.0.77]No database
selected>.
4. The SQL submitted is <select VERSION from AL_VERSION>.
Cannot retrieve <Version> from the repository. Additional database information: <SQL submitted to ODBC data source
<Prova7> resulted in error <[MySQL][ODBC 3.51 Driver][mysqld-5.0.77]No database selected>. The SQL submitted is <select
VERSION from AL_VERSION>.>.
5. Cannot retrieve <Version> from the repository. Additional database information: <SQL submitted to ODBC data source
<Prova7> resulted in error <[MySQL][ODBC 3.51 Driver][mysqld-5.0.77]No database selected>. The SQL submitted is <select
VERSION from AL_VERSION>.>.
I check if mysql DB has thas tables (they were created when I setup DS), but i don't know why this erros says No database selected the odbc file looks correct...
Thank you,
Edited by: ToloPalmer on Jun 1, 2010 9:51 AM
Edited by: ToloPalmer on Jun 1, 2010 9:58 AM -
Error while registering a new repository on Data Services 4.0
Hi all,
I've a BO Enterprise Platform 4.0 + Data Services 4.0 installation, and I'm trying to register a new local repository in addition to the installation default one. I followed these steps:
1) Create a new database schema for the repository
2) Created the local repository with repository manager
3) Created a new job server associated with the new repository through the server manager
4) Tried to register the new repository in the CMC
I wasn't able to complete the step 4 since i got the following error "unable to connect to profile server".
Any clue?
Thank you very much
Pietro
Edited by: Pietro Castelli on Jan 30, 2012 12:03 PMwhat is the complete version of DS 4.0 ? also check the REPO_TYPE in AL_VERSION table, for local repo this will be NULL
Maybe you are looking for
-
Issue with 'Ship To' in Sales A/R docs
Hi By default, a new Sales document populates the Ship-To field with the default Ship-To address from BP Masterdata. Street ZIP City (formatted according address setting in Setup / BP / Adressformats) How could that be changed? I need it like: Compan
-
HELP! Nothing is working properly on my torch!
Hi Hi hopefully someone can give me some advice or help, as I don't know what else to do! Where shall I start, I've had my BB Torch for 12 months but it started having problems after just 3. Firstly it will not recognise my password anymore, it was
-
Why is Internet Recovery stuck at Wifi selection?
I have a Snow Leopard MBP that I upgraded to Lion. There was a problem with my hard disk and my computer stopped starting up, so I erased my drive and then entered Recovery HD. I purchased a copy of Mountain Lion and tried to Reinstall OS X from the
-
In my latest image upload direct from a Nikon D3100 to iPhoto 11, all the images showed as imported but I could not find them in events. They were eventually found in 'latest import' but nowhere else. I took advice to rebuild the library (alt, comman
-
Hi experts, I have the following case: - create sales order (contains 3 line item) --> status completed - create delivery (3 line item) --> status being process - goods issue for delivery (3 line item) --> status complete - create billing document (3