Error in data template while using database function

Hi,
I have created a datatemplate in BI Publisher with the following code.
<dataTemplate name = "AuditReport" dataSourceRef = "pg">
<dataQuery>
<sqlStatement>
SELECT b.*,s.audit_table_name,s.audit_operation,s.AUDIT_TIME_STAMP
FROM bi_audit_records b,sys_audit s
where b.AUDIT_ID=s.AUDIT_ID
</sqlStatement>
</dataQuery>
<dataTrigger name="beforeReport" source="fn_audit_data(to_date('2010-04-01','yyyy-mm-dd'),to_date('2010-04-02','yyyy-mm-dd'),'ADMIN')"/>
</dataTemplate>
But when I try to view this, I am getting the following error.
A name was started with an invalid character.
Error processing resource 'http://<system name>:9704/xmlpserver/servlet/xdo'. ...

Hi,
This issue is related Oracle database issue, check with Basis/Dba team. Oce they resolved you can run the report with selections.
If you know the table name you can check in SE14 (Data base Utility) and adjust the table. Some times it will work out.
Hope it helps you.
Riyez

Similar Messages

Error in XSLT mapping while using string functions

Hi All,
While using tokenize() and substring-before() functions in XSLT mapping,we are getting an error.The error message is Unexpected symbol "" So while using string functions in XSLT mapping do we have to use any header functions.
Please through light on syntax etc.,of string functions in XSLT.
Thanx in advance,
Lokesh Dhulipudi
Edited by: LOKESH DHULIPUDI on Dec 27, 2007 7:32 AM

Hi,
Hope you have gone thru this help:
http://w3schools.com/xsl/default.asp
Rgds, Moorthy

How to convert data type while using @variable function

Hi Gurus,
I have a query.
i have created a Derived Table and the statement is given below.
select 1 as SENSITIVITY_LEVEL,1 as SUBSENSITIVITY,@variable('US_T') as NITEMS, ...........
here in @variable('US_T') "US_T" is hard coded value. I want to change to data type of hard coded value as numeric or integer
i am using sap BI 4.0 universe design tool.
Thanks in Advance.
Regards,
Jeet

Hi Jeet,
Since it is text you can't convert into number.
Can you please let mw know the exact requriement of yours?
why you need this
Thanks,
Swapnil

ORA-00902: invalid datatype comile error while using CAST function

Hi everyone,
I'm getting ORA-00902: invalid datatype compilation error while using CAST function.
open ref_cursor_list for select empName from TABLE(CAST(part_t AS partnumberlist));
The partnumberlist and ref_cursor_list is declared in the Package spec as given below.
TYPE ref_cursor_list IS REF CURSOR;
TYPE partnumberlist IS TABLE OF emp.empName%TYPE;
The error points the partnumberlist as invalid datatype in TOAD because of this i'm unable to compile the package.
Any suggestion
Thanks and regards
Sathish Gopal

Here is my code for
package Spec
CREATE OR REPLACE PACKAGE "HISTORICAL_COMMENTZ" AS
TYPE prior_part_data_record IS RECORD (
prior_part_row_id PGM_RPLCMNT_PART.PR_PART_ROW_S_ID%TYPE,
prior_pgm_chng_s_id PGM_RPLCMNT_PART.PR_PGM_CHNG_S_ID%TYPE
TYPE parts_list IS TABLE OF prior_part_data_record;
--TYPE parts_list IS TABLE OF NUMBER;
TYPE partnumberlist IS TABLE OF PGM_RPLCMNT_PART.PR_PART_ROW_S_ID%TYPE;
TYPE partnumber_cursor IS REF CURSOR;
TYPE comment_record IS RECORD (
pgm_s_id                     PGM_PART_CMNT.PGM_S_ID%TYPE,
part_row_s_id                PGM_PART_CMNT.PART_ROW_S_ID%TYPE,
pgm_chng_s_id                PGM_PART_CMNT.PGM_CHNG_S_ID%TYPE,
cmnt_txt                     PGM_PART_CMNT.CMNT_TXT%TYPE,
cmnt_dt                     PGM_PART_CMNT.CMNT_DT%TYPE,
updt_rsrc_id                PGM_PART_CMNT.UPDT_RSRC_ID%TYPE
TYPE comment_list IS TABLE OF comment_record;
global_pgm_s_id INTEGER := 0;
global_part_row_s_id INTEGER := 0;
err_num NUMBER := 999999;
err_msg VARCHAR2 (250);
PROCEDURE getComments (
pgm_s_id IN NUMBER,
part_row_s_id IN NUMBER,
partnumber_cursorlist out partnumber_cursor);
END;
Package Body
CREATE OR REPLACE PACKAGE BODY HISTORICAL_COMMENTZ
AS
FUNCTION getPriorPart
(param_prior_pgm_chng_s_id IN PGM_RPLCMNT_PART.PR_PGM_CHNG_S_ID%TYPE,
return_prior_part_data_record IN OUT prior_part_data_record
RETURN INTEGER
IS
retVal INTEGER;
prior_part_row_id INTEGER;
prior_pgm_chng_s_id INTEGER;
local_prior_part_data_record prior_part_data_record;
BEGIN
SELECT PR_PART_ROW_S_ID AS prior_part_row_id, PR_PGM_CHNG_S_ID AS prior_pgm_chng_s_id
INTO local_prior_part_data_record
--SELECT PR_PART_ROW_S_ID INTO retVal
FROM PGM_RPLCMNT_PART
WHERE PGM_S_ID = global_pgm_s_id AND CUR_PGM_CHNG_S_ID = param_prior_pgm_chng_s_id;
return_prior_part_data_record := local_prior_part_data_record;
retVal := 0;
RETURN retVal;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
retVal := -1;
RETURN retVal;
WHEN OTHERS
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
retVal := -1;
RETURN retVal;
END getPriorPart;
FUNCTION getComment (found_parts_list IN parts_list, comments OUT comment_list)
RETURN INTEGER
IS
CURSOR init_cursor
IS
SELECT PGM_S_ID,PART_ROW_S_ID,PGM_CHNG_S_ID,CMNT_TXT,CMNT_DT,UPDT_RSRC_ID
FROM PGM_PART_CMNT WHERE 1 = 2;
retVal INTEGER;
indexNum PLS_INTEGER;
local_part_record prior_part_data_record;
local_comment_record comment_record;
local_part_row_s_id NUMBER;
i PLS_INTEGER;
BEGIN
OPEN init_cursor;
FETCH init_cursor
BULK COLLECT INTO comments;
i := 0;
indexNum := found_parts_list.FIRST;
WHILE indexNum IS NOT NULL
LOOP
local_part_record := found_parts_list(indexnum);
local_part_row_s_id := local_part_record.prior_part_row_id;
SELECT PGM_S_ID,PART_ROW_S_ID,PGM_CHNG_S_ID,CMNT_TXT,CMNT_DT,UPDT_RSRC_ID
INTO local_comment_record FROM PGM_PART_CMNT
WHERE PGM_S_ID = global_pgm_s_id
AND PART_ROW_S_ID = local_part_row_s_id;
comments(i) := local_comment_record;
i := i + 1;
END LOOP;
RETURN retval;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
RETURN retval;
WHEN OTHERS
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
RETURN retval;
END getComment;
PROCEDURE getComments
pgm_s_id IN NUMBER,
part_row_s_id IN NUMBER,
partnumber_cursorlist OUT partnumber_cursor)
IS
comment_recordlist comment_record;
retPartnumberlist partnumberlist;
found_parts_list parts_list;
local_part_record prior_part_data_record;
is_more_parts BOOLEAN;
driver_chng_s_id NUMBER;
num_parts NUMBER;
retVal NUMBER;
comments comment_list;
returnPartnumberlist partnumberlist;
iloopCounter PLS_INTEGER;
inx1 PLS_INTEGER;
part_t partnumberlist :=partnumberlist(100,200,300);
CURSOR part_list_init_cursor
IS
SELECT PR_PART_ROW_S_ID,PR_PGM_CHNG_S_ID FROM PGM_RPLCMNT_PART WHERE 1 = 2;
CURSOR inIt_cursor
IS
SELECT 0 FROM DUAL WHERE 1 = 2;
BEGIN
DBMS_OUTPUT.ENABLE (5000000);
global_pgm_s_id := pgm_s_id;
global_part_row_s_id := part_row_s_id;
SELECT PART_ROW_S_ID AS prior_part_row_id, PR_PGM_CHNG_S_ID AS prior_pgm_chng_s_id
INTO local_part_record
FROM PGM_RPLCMNT_PART
WHERE PGM_S_ID = global_pgm_s_id AND PART_ROW_S_ID = global_part_row_s_id AND
CUR_PGM_CHNG_S_ID IN (SELECT MAX(CUR_PGM_CHNG_S_ID) FROM PGM_RPLCMNT_PART WHERE
PGM_S_ID = global_pgm_s_id AND PART_ROW_S_ID = global_part_row_s_id
GROUP BY PART_ROW_S_ID);
OPEN part_list_init_cursor;
FETCH part_list_init_cursor
BULK COLLECT INTO found_parts_list;
-- Add the existing part to the found list
found_parts_list.EXTEND;
found_parts_list(1) := local_part_record;
driver_chng_s_id := local_part_record.prior_pgm_chng_s_id;
num_parts := 1;
is_more_parts := TRUE;
WHILE (is_more_parts) LOOP
retVal := getPriorPart(driver_chng_s_id,local_part_record);
IF (retVal != -1) THEN
found_parts_list.EXTEND;
num_parts := num_parts + 1;
found_parts_list(num_parts) := local_part_record;
driver_chng_s_id := local_part_record.prior_pgm_chng_s_id;
ELSE
is_more_parts := FALSE;
END IF;
END LOOP;
--num_parts := getComment(found_parts_list,comments);
OPEN init_cursor;
FETCH init_cursor
BULK COLLECT INTO returnPartnumberlist;
num_parts := found_parts_list.COUNT;
FOR iloopCounter IN 1 .. num_parts
LOOP
returnPartnumberlist.EXTEND;
returnPartnumberlist(iloopCounter) := found_parts_list(iloopCounter).prior_part_row_id;
END LOOP;
retPartnumberlist := returnPartnumberlist;
open
*          partnumber_cursorlist for select PR_PART_ROW_S_ID from TABLE(CAST(retPartnumberlist AS historical_commentz.partnumberlist));*
DBMS_OUTPUT.put_line('Done....!');
EXCEPTION
some code..............................
END getComments;
END HISTORICAL_COMMENTZ;
/

Error while using the function module..pack_handling_unit_dlvry

Hi all...
while using the function module pack_handling_unit_dlvry,
we need to pass the handling unit number as per the functionality we require.
but the mandatory field for the function module is the handling unit number in the form of bar code..
so how to use this function module..
All the useful answers will be regarded..
Regards,
Saroja.

Have you tried using BAPI BAPI_HU_CREATE. Also view Function Module Documentation on its usage.

Dropdown values are missing while using the function module KCD_EXCEL_OLE_TO_INT_CONVERT

Hi all,
when i am trying to upload the excel template by using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT" to an internal table some field values are missing.
i am using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT" and i am uploading an excel template and downloading that excel data into an internal table but some field values are missing while uploading the excel template and i found that the field which contains the drop down list values those values are missing.
And also when i am uploading the excel template by using the function module" KCD_EXCEL_OLE_TO_INT_CONVERT" when i am coming out of this function module one pop up is coming. how can i avoid this popup, can any one please provide me the solution thanks in advance.
FYI...it is showing the below popup screen ..
Thanks,
Koushik

hi Feiyun,
below is the code(highlighted in bold)and after coming out of the function module i am getting popup and also the drop down values are missing.
DATA: ls_control         TYPE zsfi_fiupload_control,
         ls_header          TYPE zsfi_fiupload_header_v13,
         ls_item            TYPE zsfi_fiupload_item_v13,
         ls_trailer         TYPE zsfi_fiupload_control,
         l_line_count       LIKE zsfi_fiupload_control-rec_count,
         l_current_curr     TYPE kcde_cells-value,
         l_current_postdate TYPE kcde_cells-value,
         l_current_compcode TYPE kcde_cells-value,
         l_currentrow       TYPE kcde_cells-row,
         l_filename         LIKE rlgrap-filename.
   DATA: BEGIN OF lt_intern OCCURS 0.
           INCLUDE STRUCTURE kcde_cells.
   DATA: END OF lt_intern.
   DATA: BEGIN OF lt_items OCCURS 0,
           a TYPE kcde_cells-value,
           b TYPE kcde_cells-value,
           c TYPE kcde_cells-value,
           d TYPE kcde_cells-value,
           e TYPE kcde_cells-value,
           f TYPE kcde_cells-value,
           g TYPE kcde_cells-value,
           h TYPE kcde_cells-value,
           i TYPE kcde_cells-value,
           j TYPE kcde_cells-value,
           k TYPE kcde_cells-value,
           l TYPE kcde_cells-value,
           m TYPE kcde_cells-value,
           n TYPE kcde_cells-value,
           o TYPE kcde_cells-value,
           p TYPE kcde_cells-value,
           q TYPE kcde_cells-value,
           r TYPE kcde_cells-value,
           s TYPE kcde_cells-value,
           t TYPE kcde_cells-value,
           u TYPE kcde_cells-value,
           v TYPE kcde_cells-value,
           w TYPE kcde_cells-value,
           x TYPE kcde_cells-value,
           y TYPE kcde_cells-value,
           z TYPE kcde_cells-value,
           aa TYPE kcde_cells-value,
           ab TYPE kcde_cells-value,
           ac TYPE kcde_cells-value,
           ad TYPE kcde_cells-value,
           ae TYPE kcde_cells-value,
           af TYPE kcde_cells-value,
           ag TYPE kcde_cells-value,
           ah TYPE kcde_cells-value,
           ai TYPE kcde_cells-value,
           AJ TYPE KCDE_CELLS-VALUE,
           AK TYPE KCDE_CELLS-VALUE,
           END OF lt_items.
   l_filename = p_flpath.
* the file must be an xls file, not xlsx or comma seperated
   IF p_flpath NS '.xls' AND p_flpath NS '.XLS'.
     MESSAGE i261(zfi).
     g_error = 'X'.
     EXIT.
   ENDIF.
* upload excel file to a generic table
   CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
     EXPORTING
       filename                = l_filename
       i_begin_col             = 1
       i_begin_row             = 1
       i_end_col               = 150
       i_end_row               = 65000
     TABLES
       intern                  = lt_intern
     EXCEPTIONS
       inconsistent_parameters = 1
       upload_ole              = 2
       OTHERS                  = 3.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.
* validate that the format is in the restatement format
* this is the only template to have the ledger group in cell G-2
** READ TABLE lt_intern WITH KEY row = '0002' col = '0007'.
** IF sy-subrc <> 0 OR lt_intern-value IS INITIAL.
**    MESSAGE i260(zfi).
**    g_error = 'X'.
**    EXIT.
** ENDIF.
* create control record values
   ls_control-rec_type = 'C'.
   ls_control-global_id = 'GLU-03000'.
   ls_control-local_id = ''.
   ls_control-rec_count = ''.
   CONCATENATE sy-datum sy-uzeit INTO ls_control-date.
   ls_control-version = '12'.
   ls_control-email = ''.
   ls_control-eor = 'X'.
   ls_trailer = ls_control.
* open output file and add the control record
   OPEN DATASET p_unixfilename FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
   TRANSFER ls_control TO p_unixfilename.
* create header record values, will be transfered to file in the item loop
   ls_header-rec_type = 'H'.
   READ TABLE lt_intern WITH KEY row = '0017' col = '0003'.
   IF sy-subrc = 0.
     ls_header-header_txt = lt_intern-value.
   ENDIF.
   READ TABLE lt_intern WITH key row = '0020' col = '0002'.
   IF sy-subrc = 0.
     ls_header-comp_code = lt_intern-value.
   ENDIF.
************doc date
   READ TABLE lt_intern WITH KEY row = '0011' col = '0003'.
   IF sy-subrc = 0.
     ls_header-pstng_date = lt_intern-value.
   ENDIF.
************posting date
     ls_header-doc_date = sy-datum.
   READ TABLE lt_intern WITH KEY row = '0009' col = '0003'.
   IF sy-subrc = 0.
     ls_header-doc_type = lt_intern-value.
   ENDIF.
   READ TABLE lt_intern WITH KEY row = '0014' col = '0003'.
   IF sy-subrc = 0.
     ls_header-ref_doc_no = lt_intern-value.
   ENDIF.
************currency moved to line items
     READ TABLE lt_intern WITH KEY row = '0020' col = '0001'.
   IF sy-subrc = 0.
   ls_header-currency = lt_intern-value.
   ENDIF.
   ls_header-trans_date = ''.
   READ TABLE lt_intern WITH KEY row = '0010' col = '0003'.
   IF sy-subrc = 0.
     ls_header-period = lt_intern-value.
   ENDIF.
   READ TABLE lt_intern WITH KEY row = '0006' col = '0003'.
   IF sy-subrc = 0.
     ls_header-reason_rev = lt_intern-value.
   ENDIF.
   READ TABLE lt_intern WITH KEY row = '0007' col = '0003'.
   IF sy-subrc = 0.
     ls_header-rev_date = lt_intern-value.
   ENDIF.
* READ TABLE lt_intern WITH KEY row = '0002' col = '0007'.
* IF sy-subrc = 0.
     ls_header-ledger_grp = ''.
* ENDIF.
* READ TABLE lt_intern WITH KEY row = '0013' col = '0013'.
* IF sy-subrc = 0.
     ls_header-exch_rate = ''.
* ENDIF.
   READ TABLE lt_intern WITH KEY row = '0008' col = '0003'.
   IF sy-subrc = 0.
     ls_header-calc_tax = lt_intern-value.
   ENDIF.
   ls_header-eor = 'X'.
* loop at the line items and append them to a table with multiple columns
   LOOP AT lt_intern WHERE row GE 20.
     IF l_currentrow <> lt_intern-row AND l_currentrow IS NOT INITIAL.
       APPEND lt_items.
       CLEAR lt_items.
     ENDIF.
     l_currentrow = lt_intern-row.
     CASE lt_intern-col.
       WHEN '0001'. lt_items-a = lt_intern-value.
       WHEN '0002'. lt_items-b = lt_intern-value.
       WHEN '0003'. lt_items-c = lt_intern-value.
       WHEN '0004'. lt_items-d = lt_intern-value.
       WHEN '0005'. lt_items-e = lt_intern-value.
       WHEN '0006'. lt_items-f = lt_intern-value.
       WHEN '0007'. lt_items-g = lt_intern-value.
       WHEN '0008'. lt_items-h = lt_intern-value.
       WHEN '0009'. lt_items-i = lt_intern-value.
       WHEN '0010'. lt_items-j = lt_intern-value.
       WHEN '0011'. lt_items-k = lt_intern-value.
       WHEN '0012'. lt_items-l = lt_intern-value.
       WHEN '0013'. lt_items-m = lt_intern-value.
       WHEN '0014'. lt_items-n = lt_intern-value.
       WHEN '0015'. lt_items-o = lt_intern-value.
       WHEN '0016'. lt_items-p = lt_intern-value.
       WHEN '0017'. lt_items-q = lt_intern-value.
       WHEN '0018'. lt_items-r = lt_intern-value.
       WHEN '0019'. lt_items-s = lt_intern-value.
       WHEN '0020'. lt_items-t = lt_intern-value.
       WHEN '0021'. lt_items-u = lt_intern-value.
       WHEN '0022'. lt_items-v = lt_intern-value.
       WHEN '0023'. lt_items-w = lt_intern-value.
       WHEN '0024'. lt_items-x = lt_intern-value.
       WHEN '0025'. lt_items-y = lt_intern-value.
       WHEN '0026'. lt_items-z = lt_intern-value.
       WHEN '0027'. lt_items-aa = lt_intern-value.
       WHEN '0028'. lt_items-ab = lt_intern-value.
       WHEN '0029'. lt_items-ac = lt_intern-value.
       WHEN '0030'. lt_items-ad = lt_intern-value.
       WHEN '0031'. lt_items-ae = lt_intern-value.
       WHEN '0032'. lt_items-af = lt_intern-value.
       WHEN '0033'. lt_items-ag = lt_intern-value.
       WHEN '0034'. lt_items-ah = lt_intern-value.
       WHEN '0035'. lt_items-ai = lt_intern-value.
       when '0036'. lt_items-aj = lt_intern-value.
       when '0037'. lt_items-ak = lt_intern-value.
     ENDCASE.
   ENDLOOP.
   APPEND lt_items.
* sort rows by the post date, comp code, curr.
* SORT lt_items BY ah a ai.
* loop at the items, creating a header record if the comp code, curr. or post date changes
   LOOP AT lt_items.
     ls_item-rec_type = 'I'.
     ls_item-post_key = lt_items-c.   "lt_items-b.
     IF lt_items-c GE '20' AND lt_items-c LE '39'.
       ls_item-vendor_no = lt_items-d.
     ELSEIF lt_items-c GE '0' AND lt_items-c LE '19'.
       ls_item-customer = lt_items-d.
     ELSEIF lt_items-c EQ '70' AND lt_items-c EQ '75'.
       ls_item-asset = lt_items-d.
     ELSE.
       ls_item-gl_account = lt_items-d.
     ENDIF.
     ls_item-asset_type = lt_items-m. "lt_items-l.
     ls_item-trans_type = lt_items-n. "lt_items-m.
     ls_item-print_flag = ''.
     ls_item-item_text = lt_items-j. "lt_items-i.
     ls_item-comp_code = lt_items-b. "lt_items-a.
     ls_item-bus_area = ''.
     ls_item-alloc_nmbr = lt_items-l. "lt_items-k.
     ls_item-tax_code = lt_items-q. "lt_items-p.
     ls_item-taxjurcode = lt_items-r. "lt_items-q.
     ls_item-profit_ctr = lt_items-g. "lt_items-f.
     ls_item-costcenter = lt_items-h. "lt_items-g.
     ls_item-orderid = lt_items-ac. "lt_items-ab.
     ls_item-wbs = lt_items-i. "lt_items-h.
     ls_item-trade_id = lt_items-o. "lt_items-n.
     ls_item-part_prctr = lt_items-p. "lt_items-o.
     ls_item-material = lt_items-t. "lt_items-s.
     ls_item-salesorg = lt_items-aa. "lt_items-z.
     ls_item-distr_chan = lt_items-ab. "lt_items-aa.
     ls_item-pmnttrms = ''.
     ls_item-pmtmthd = ''.
     ls_item-pmtmthsupl = ''.
     ls_item-alt_payee = ''.
     REPLACE ALL OCCURRENCES OF '(' IN lt_items-e WITH ''.
     REPLACE ALL OCCURRENCES OF ')' IN lt_items-e WITH ''.
     ls_item-amt_doccur = lt_items-e. "lt_items-d
     REPLACE ALL OCCURRENCES OF '(' IN lt_items-f WITH ''.
     REPLACE ALL OCCURRENCES OF ')' IN lt_items-f WITH ''.
     ls_item-loc_amt = lt_items-f. "lt_items-e
     ls_item-loc = lt_items-k. "lt_items-j.
     ls_item-sas_revtype = lt_items-s. "lt_items-r.
     ls_item-rev_type = lt_items-u. "lt_items-t.
     ls_item-rev_chnl = lt_items-v. "lt_items-u.
     ls_item-bill_to = lt_items-x. "lt_items-w.
     ls_item-payer = lt_items-z. "lt_items-y.
     ls_item-ship_to = lt_items-y.
     ls_item-tax_amnt = lt_items-x.
     ls_item-func_area = ''.
     ls_item-expend_date = lt_items-ae. "lt_items-ad.
     ls_item-wtax_code = lt_items-af. "lt_items-ae.
     ls_item-wtax_base = lt_items-ag. "lt_items-af.
     ls_item-wtax_amount = lt_items-ah. "lt_items-ag.
     ls_item-payment_block = ''.
     ls_item-grp_amt = ''.
     ls_item-anc_amt = ''.
     ls_item-permit_payee = ''.
     ls_item-value_date = ''.
     ls_item-pernr   = ''.
     ls_item-legacy1 = ''.
     ls_item-legacy2 = ''.
     ls_item-legacy3 = ''.
     ls_item-legacy4 = ''.
     ls_item-legacy5 = ''.
     ls_item-legacy6 = ''.
     ls_item-legacy7 = ''.
     ls_item-legacy8 = ''.
     ls_item-legacy9 = ''.
     ls_item-legacy10 = ''.
     ls_item-eor = 'X'.
     TRANSLATE lt_items-ai TO UPPER CASE.
     TRANSLATE lt_items-b TO UPPER CASE.
     TRANSLATE lt_items-a TO UPPER CASE.
     TRANSLATE lt_items-aj TO UPPER CASE.
     IF l_current_curr <> lt_items-a "lt_items-ai
       OR l_current_postdate <> ls_header-pstng_date "lt_items-aj
       OR l_current_compcode <> lt_items-b.
       l_current_curr = lt_items-a.
       l_current_postdate = ls_header-pstng_date. "lt_items-aj.
       l_current_compcode = lt_items-b.
       ls_header-comp_code = l_current_compcode.
       ls_header-currency = l_current_curr.
       ls_header-pstng_date = l_current_postdate.
       ls_header-doc_date = l_current_postdate.
       TRANSFER ls_header TO p_unixfilename.
       l_line_count = l_line_count + 1.
     ENDIF.
     TRANSFER ls_item TO p_unixfilename.
     l_line_count = l_line_count + 1.
   ENDLOOP.
   ls_trailer-rec_type = 'T'.
   ls_trailer-rec_count = l_line_count.
   TRANSFER ls_trailer TO p_unixfilename.
   CLOSE DATASET p_unixfilename.
* change the format to fixed format for the remainder of the load program
   p_fixed = 'X'.
   p_rstmnt = ''.
Thanks,
Koushik

Compilation problem with templates while using option -m64

Hi,
I have compilation problem with template while using option -m64.
No problem while using option -m32.
@ uname -a
SunOS snt5010 5.10 Generic_127111-11 sun4v sparc SUNW,SPARC-Enterprise-T5220
$ CC -V
CC: Sun C++ 5.9 SunOS_sparc Patch 124863-01 2007/07/25
Here is some C++ program
############# foo5.cpp #############
template <typename T, T N, unsigned long S = sizeof(T) * 8>
struct static_number_of_ones
static const T m_value = static_number_of_ones<T, N, S - 1>::m_value >> 1;
static const unsigned long m_count = static_number_of_ones<T, N, S - 1>::m_count + (static_number_of_ones<T, N, S - 1>::m_value & 0x1);
template <typename T, T N>
struct static_number_of_ones<T, N, 0>
static const T m_value = N;
static const unsigned long m_count = 0;
template <typename T, T N>
struct static_is_power_of_2
static const bool m_result = (static_number_of_ones<T,N>::m_count == 1);
template <unsigned long N>
struct static_number_is_power_of_2
static const bool m_result = (static_number_of_ones<unsigned long, N>::m_count == 1);
int main(int argc)
int ret = 0;
if (argc > 1)
ret += static_is_power_of_2<unsigned short, 16>::m_result;
ret += static_is_power_of_2<unsigned int, 16>::m_result;
ret += static_is_power_of_2<unsigned long, 16>::m_result;
ret += static_number_is_power_of_2<16>::m_result;
else
ret += static_is_power_of_2<unsigned short, 17>::m_result;
ret += static_is_power_of_2<unsigned int, 17>::m_result;
ret += static_is_power_of_2<unsigned long, 17>::m_result;
ret += static_number_is_power_of_2<17>::m_result;
return ret;
Compiation:
@ CC -m32 foo5.cpp
// No problem
@ CC -m64 foo5.cpp
"foo5.cpp", line 20: Error: An integer constant expression is required here.
"foo5.cpp", line 36: Where: While specializing "static_is_power_of_2<unsigned long, 16>".
"foo5.cpp", line 36: Where: Specialized in non-template code.
"foo5.cpp", line 26: Error: An integer constant expression is required here.
"foo5.cpp", line 37: Where: While specializing "static_number_is_power_of_2<16>".
"foo5.cpp", line 37: Where: Specialized in non-template code.
"foo5.cpp", line 20: Error: An integer constant expression is required here.
"foo5.cpp", line 43: Where: While specializing "static_is_power_of_2<unsigned long, 17>".
"foo5.cpp", line 43: Where: Specialized in non-template code.
"foo5.cpp", line 26: Error: An integer constant expression is required here.
"foo5.cpp", line 44: Where: While specializing "static_number_is_power_of_2<17>".
"foo5.cpp", line 44: Where: Specialized in non-template code.
4 Error(s) detected.
Predefined macro:
@ CC -m32 -xdumpmacros=defs foo5.cpp | & tee log32
@ CC -m64 -xdumpmacros=defs foo5.cpp | & tee log64
@ diff log32 log64
7c7
< #define __TIME__ "09:24:58"
#define __TIME__ "09:25:38"20c20
< #define __sparcv8plus 1
#define __sparcv9 1[snipped]
=========================
What is wrong?
Thanks,
Alex Vinokur

Bug 6749491 has been filed for this problem. It will be visible at [http://bugs.sun.com] in a day or two.
If you have a service contract with Sun, you can ask to have this bug's priority raised, and get a pre-release version of a compiler patch that fixes the problem.
Otherwise, you can check for new patches from time to time at
[http://developers.sun.com/sunstudio/downloads/patches/]
and see whether this bug is listed as fixed.

How to find which all workbook is using Database function ( User Defined)

Hi All,
Is it possible to find out which all workbook is using Database function( User Defined).
Thanks,

Hi,
If I had to do this detective work, I would probably do the following:
1. Activate for a period of time the function, eul5_post_save_document. This function when activated is triggered at the time a workbook is saved. If you look at its columns, it save the worksheet's SQL.
2. Next, I would parse the EUL5_WORKSHEET_SQL.SQL_SEGMENT column which is a varchar2(4000) column. There are many effective Oracle functions which could aid you in this effort (e.g. instring or perhaps a regular expression function).
I hope this helps.
Patrick

WebPart is raising the following error "Invalid data has been used to update the list item.The field you are trying to update may be read only"

I have created a farm solution and then i deploy it to SharePoint server, the code looks as follow, and i use it to update a page info values (as the current page values represents old info):-
[ToolboxItemAttribute(false)]
public partial class VisualWebPart1 : WebPart
// Uncomment the following SecurityPermission attribute only when doing Performance Profiling using
// the Instrumentation method, and then remove the SecurityPermission attribute when the code is ready
// for production. Because the SecurityPermission attribute bypasses the security check for callers of
// your constructor, it's not recommended for production purposes.
// [System.Security.Permissions.SecurityPermission(System.Security.Permissions.SecurityAction.Assert, UnmanagedCode = true)]
public VisualWebPart1()
protected override void OnInit(EventArgs e)
base.OnInit(e);
InitializeControl();
using (SPSite site = new SPSite(SPContext.Current.Site.Url))
using (SPWeb web = site.OpenWeb())
SPList list = web.Lists["Pages"];
web.AllowUnsafeUpdates = true;
foreach (SPListItem items in list.Items)
items["Author"] = "SharePoint";
items["Created"] = "01/08/2014 01:44 PM";
items.Update();
list.Update();
web.AllowUnsafeUpdates = false;
protected void Page_Load(object sender, EventArgs e)
but when i try adding this web part to a page i got the following error:-
Invalid data has been used to update the list item.The field you are trying to update may be read only
so can anyone advice?

i only changed lines bitween
web.AllowUnsafeUpdates = true;
and
web.AllowUnsafeUpdates = false;
and other parts of code remains without change
so it will updates all pages in current web
yaşamak bir eylemdir

After the most recent iPhoto update, I keep getting the following error: "iPhoto quit unexpectedly while using the Sonix SN9c201 webcam plugin." This seems to happen after *every* iPhoto update. Is there a fix on the way?

After the most recent iPhoto update, I keep getting the following error: "iPhoto quit unexpectedly while using the Sonix SN9c201 webcam plugin." This seems to happen after *every* iPhoto update. Is there a fix on the way?

As you can see below, when I right click, I have no such option. In the User Account Settings, I'm operating as the "System Administrator".
Any other suggestions?

Error while using row_num function in forms6i

Oracle forms6i
Hai
While using row num function in my forms i had a error.
My coding is
declare
pin_no varchar2(16);
pin_date date;
pin_time varchar2(25);
mstr varchar2(200);
m_file TEXT_IO.FILE_TYPE;
m_file_path varchar2(100) := :global.filename;
line_count number;
M_BARCODE VARCHAR2(16);
M_BARDATE DATE;
M_BARTIME varchar2(25);
M_No number;
Cursor c1 is
select barcode,bardate,bartime,
row_number() over (partition barcode order by bartime) as RN-------------------the error at this line
from temp_attendance
group by barcode,bardate,bartime
order by bardate;
begin
If m_file_path is not null then
m_file:= TEXT_IO.fopen(m_file_path, 'r');
--DELETE FROM temp_attendance;
Loop
begin
TEXT_IO.get_line(m_file,mstr);
mstr := ltrim(rtrim(mstr));
M_barcode :=substr(mstr,1,16);
M_bardate := to_date(substr(mstr,17,8),'DD/MM/YYYY');
M_bartime := (substr(mstr,25,4));
INSERT INTO temp_attendance(BARCODE,BARDATE,BARTIME,RN) VALUES(M_BARCODE,M_BARDATE,M_BARTIME,M_No);
Exception
when no_data_found then
text_io.fclose(m_file);
exit;
End;
End loop;
go_block('TEST_MS1');
clear_block(no_validate);
For r1 in c1 loop
     :barcode := r1.barcode;
     :bardate := r1.bardate;
     :bartime := r1.bartime;
     next_Record;
end loop;
first_record;
end if;
exception
when others then
forms_ddl('ROLLBACK');
message (sqlerrm);
end;
Thanks & Regards
Srikkanth.M

Hi,
Try using:
row_number() over (partition BY barcode order by bartime) as RN
If that wasn't the problem, what is the error you are getting?
Regards.

Error while using group function

Oracle forms6i
Hai
While i am compile my coding it compile successfully, but when i tried to executes i shows error in group function
my coding is
if (cnt<>0 ) then
select BARCODE,INTIME,OUTTIME into today_bar,today_in,today_out from dail_att where BARCODE= :Barcode
and ATTEND_DATE = :bardate;
update dail_att set outtime = max(:bartime) where barcode= :barcode
and ATTEND_DATE = :bardate;
else
if (cnt2<>0 ) then
select INTIME,OUTTIME into yest_in,yest_out from dail_att where BARCODE= :Barcode
and ATTEND_DATE = :bardate-1;
if(yest_in is not null and yest_out is null) then
update dail_att set outtime =max(:bartime) where barcode= :barcode
and ATTEND_DATE = :bardate-1;
else
insert into dail_att(barcode,intime,attend_date)
values(:barcode,min(:bartime),:bardate);
end if;
else
if :bartime between 0100 and 0630 then
insert into dail_att(barcode,intime,attend_date)
values(:barcode,min(:bartime),:bardate-1);
update dail_att set outtime = max(:bartime) where barcode= :barcode
and ATTEND_DATE = :bardate-1;
else
insert into dail_att(barcode,intime,attend_date)
values(:barcode,:min(bartime),:bardate);
end if;
end if;
end if;
while i am trying to this groupfunction it throws error while i use having tell me how to use group function and where
to use
Regadrs
Srikkanth.M

Hai sir
I had a table that contain fields
EMPCODE NUMBER
EMPNAME VARCHAR2(25)
BARCODE VARCHAR2(25)
INTIME VARCHAR2(25)
OUTTIME VARCHAR2(25)
INTRTIMEIN VARCHAR2(25)
INTROUTTIME VARCHAR2(25)
PERTIMEIN VARCHAR2(25);
PERTIMEOUT VARCHAR2(25);
ATTEND_DATE DATE ;
Consider that a table with 6 fields ie timein,intrtimein,pertimein,pertimeout,intrtimeout,timeout
I have generating a attendance table and a table contain 6 various times for an employees and we need to arrange it in order
0815,0816,1230,1250,1645,1646
If 0815 is the starting time then timein ie mintime
0816 stored to be in intrtime
then1250 then it stored in pertimein
then 1230 then it stored in pertimeout
then 1645 stored in intrtimeout
then 1646 stored in timeout
I tried with max and min function but its not working properly pls tell me some solutions
Thanks & Regards
Srikkanth.M

Error while using Ago function

hi all,
OBI 11.1.1.7.1
I am unable to view data on result tab. No value returned in Calcutated Attribute. Please Help
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 22040] To use Ago function, the storage level of the query ('[Time Dim.PAY_DT]') must be a static level.Please have your System Administrator look at the log for more details on this error. (HY000)
Regards,
Nivedita

Substr("Fin Account".ASSET_NUM, 1, instr(Fin Account".ASSET_NUM, ':')+1)
or
Substr("Fin Account".ASSET_NUM, instr(Fin Account".ASSET_NUM, ':')+1,50)
i think you should use 3 parameters, did you try that if it would work?
additionally check what is the default format of your data: go to column properties -> data format; if its text then ok; otherwise you will have to cast the number to char; in such a case the above could be:
Substr(cast("Fin Account".ASSET_NUM as char(20)), 1, instr(cast(Fin Account".ASSET_NUM as char(20)), ':')+1)
or
Substr(cast("Fin Account".ASSET_NUM as char(20)), instr(cast(Fin Account".ASSET_NUM as char(20)), ':')+1,50)
Edited by: UserMB on Jun 25, 2009 6:17 AM

Error while using substring function

Hi,
I am getting the below error while using this query.
Substr("Fin Account".ASSET_NUM, instr(Fin Account".ASSET_NUM, ':')+1)
(nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <(>: Syntax error [nQSError: 26012] . (HY000)
Please help me..
Edited by: user10441472 on Jun 24, 2009 12:49 PM

Substr("Fin Account".ASSET_NUM, 1, instr(Fin Account".ASSET_NUM, ':')+1)
or
Substr("Fin Account".ASSET_NUM, instr(Fin Account".ASSET_NUM, ':')+1,50)
i think you should use 3 parameters, did you try that if it would work?
additionally check what is the default format of your data: go to column properties -> data format; if its text then ok; otherwise you will have to cast the number to char; in such a case the above could be:
Substr(cast("Fin Account".ASSET_NUM as char(20)), 1, instr(cast(Fin Account".ASSET_NUM as char(20)), ':')+1)
or
Substr(cast("Fin Account".ASSET_NUM as char(20)), instr(cast(Fin Account".ASSET_NUM as char(20)), ':')+1,50)
Edited by: UserMB on Jun 25, 2009 6:17 AM

Error while using the function module GUI_UPLOAD

Hi,
My requirement is to upload the data from .txt file into internal table.
I have given my code like this
PARAMETERS: p_fname LIKE rlgrap-filename.
data: begin of gt_string occurs 0,
       record type char255,
      end of gt_string.
AT SELECTION-SCREEN ON VALUE-REQUEST for p_fname.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
   EXPORTING
    PROGRAM_NAME        = SYST-REPID
    DYNPRO_NUMBER       = SYST-DYNNR
    FIELD_NAME          = ' '
     STATIC              = 'X'
    MASK                = ' '
    CHANGING
      file_name           = p_fname
   EXCEPTIONS
     MASK_TOO_LONG       = 1
     OTHERS              = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                      = p_fname
     FILETYPE                      = 'ASC'
     HAS_FIELD_SEPARATOR           = 'X'
     HEADER_LENGTH                 = 0
    READ_BY_LINE                  = 'X'
    DAT_MODE                      = ' '
    CODEPAGE                      = ' '
    IGNORE_CERR                   = ABAP_TRUE
    REPLACEMENT                   = '#'
    CHECK_BOM                     = ' '
    NO_AUTH_CHECK                 = ' '
IMPORTING
    FILELENGTH                    =
    HEADER                        =
    tables
      data_tab                      = gt_string
   EXCEPTIONS
     FILE_OPEN_ERROR               = 1
     FILE_READ_ERROR               = 2
     NO_BATCH                      = 3
     GUI_REFUSE_FILETRANSFER       = 4
     INVALID_TYPE                  = 5
     NO_AUTHORITY                  = 6
     UNKNOWN_ERROR                 = 7
     BAD_DATA_FORMAT               = 8
     HEADER_NOT_ALLOWED            = 9
     SEPARATOR_NOT_ALLOWED         = 10
     HEADER_TOO_LONG               = 11
     UNKNOWN_DP_ERROR              = 12
     ACCESS_DENIED                 = 13
     DP_OUT_OF_MEMORY              = 14
     DISK_FULL                     = 15
     DP_TIMEOUT                    = 16
     OTHERS                        = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Here I am getting dump error as 'Type conflict when calling a function module.
The function module interface allows you to specify only fields
of a particular type under "FILENAME". The field "P_FNAME" specified here has a different field type'.
What would be the reason for this error?
Can anyone help me?
Regards,
Hema

see this sample program for F4 help
*& Report ZSD_EXCEL_INT_APP
REPORT ZSD_EXCEL_INT_APP.
parameter: file_nm type localfile.
types : begin of it_tab1,
        f1(20),
        f2(40),
        f3(20),
       end of it_tab1.
data : it_tab type table of ALSMEX_TABLINE with header line,
       file type rlgrap-filename.
data : it_tab2 type it_tab1 occurs 1,
       wa_tab2 type it_tab1,
       w_message(100) TYPE c.
at selection-screen on value-request for file_nm.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME        = SYST-REPID
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
   STATIC              = 'X'
MASK                = ' '
CHANGING
   file_name           = file_nm
EXCEPTIONS
   MASK_TOO_LONG       = 1
   OTHERS              = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
refresh it_tab2[].clear wa_tab2.
file = file_nm.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    filename                      = file
    i_begin_col                   = '1'
    i_begin_row                   = '1'
    i_end_col                     = '10'
    i_end_row                     = '35'
tables
    intern                        = it_tab
EXCEPTIONS
   INCONSISTENT_PARAMETERS       = 1
   UPLOAD_OLE                    = 2
   OTHERS                        = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at it_tab.
case it_tab-col.
   when '002'.
    wa_tab2-f1 = it_tab-value.
   when '004'.
    wa_tab2-f2 = it_tab-value.
when '008'.
    wa_tab2-f3 = it_tab-value.
endcase.
at end of row.
append wa_tab2 to it_tab2.
clear wa_tab2.
endat.
endloop.
data : p_file TYPE rlgrap-filename value 'TEST3.txt'.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*--- Display error messages if any.
IF sy-subrc NE 0.
    MESSAGE e001(zsd_mes).
    EXIT.
ELSE.
*---Data is downloaded to the application server file path
    LOOP AT it_tab2 INTO wa_tab2.
      TRANSFER wa_tab2 TO p_file.
    ENDLOOP.
ENDIF.
*--Close the Application server file (Mandatory).
CLOSE DATASET p_file.
loop at it_tab2 into wa_tab2.
write : / wa_tab2-f1,wa_tab2-f2,wa_tab2-f3.
endloop.

Error in data template while using database function

Similar Messages

Maybe you are looking for