Error in Datasource 0FI_AP_51 in RSA3

Hello All,
I am Executing DataSource 0FI_AP_51 in RSA3, Getting message like Error in Datasource, I checked in Rsa2 there is no any error or warning, Kindly suggest
Thanks
Shalini

Hi Shalini,
Is your issue resolved. I am facing the same issue. Please let me know the soultion.
Experts,
When I am trying to execute 0FI_AP_51 in RSA3, its popping up an information 'Errors occurred during the extraction'. Any solution for this?
thanks
AP

Similar Messages

Error while extracting data from datasource 0GLACCEXT_T011_HIER in RSA3

Hi Experts,
While trying to extract the data for the datasource 0GLACCEXT_T011_HIER in RSA3, am getting the below Dump.
Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
Except.                CX_SY_OPEN_SQL_DB
Short text
    The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLFAGL_FSV" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
     in
    procedure "FSV_TEXTS_CONVERT" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
Kindly help me out in resolving this error.

Hi,
This dump occurs if the storage of original files is not happening in a Content Server, which is recommended by SAP. You can check this easily if you go to transaction DC10 and check if the flag 'Use KPRO' is set for the used document type.
SAP do not recommend storing such larger files in SAP DB. If you try to store any original in the SAP DB, the file will be stored in the table DRAO. That means you are consuming table space memory. For one original we can have maximum of 9999 rows in the table. To store larger originals in SAP DB more than 9999 rows in the table are needed and this is not possible. That's the reason behind this dump. Storing such huge files inthe SAP DB will also affect the performance of the system while accessing the original
Refer the thread
"http://wiki.sdn.sap.com/wiki/display/PLM/SAPSQL_ARRAY_INSERT_DUPRECwhilesaving+original"
Thanks,

Error message: DataSource ZPRODUCT_STATUS_TEXT has to be replicated...

Hi All,
a job in a process chain was failed with this error message:
DataSource ZPRODUCT_STATUS_TEXT has to be replicated (time stamp, see long text) R3 16
our R/3 system it was upgraded one week ago for the ECC6 version and our BW version is still 3.0b, i don't know if because the upgrade processus i get this error and i have to do something in the BW system...
thanks for your help
Bilal

HI,
i tried to do what you said, from infosource: replicate datasources and after se38 and i have choice in the box the name of infosource and after execute
but i have get like a message: problem class important
message text: No transfer structure selected
Message Text
No Transfer Strcuture Selected....with this info
Technical data
Message type__________ I (Information)
Message class_________ RSAR (Data transfer and meta data maintenance)
Message number________ 051
Message variable 1____ No Transfer Strcuture Selected
Message variable 2____
Message variable 3____
Message variable 4____
Message attributes
Level of detail_______ 1 (Level of detail 1)
Problem class_________ 2 (important)
Sort criterion________
Number________________ 1
i have tried to load again but the same problem...any body have a plus info....
Thanks
Bilal

Errors occured during extraction at RSA3

hi
i am giving these datasource and get data at rsa3, its giving error like error occured during extractions?
can u please let me know what could be the reason?
0CO_PC_PCP_03
0CO_PC_PCP_04

Hi,
Check the Log in RSA3, youca n find log and see it and correct it.
Steps:
1. Inastall DS in RSA5
2. Check in RSA6.
3. Extract in RSA3.
Thanks
Reddy

ERRORS OCCURED DURING EXTRACTION USING RSA3

Dear Folks,
I have an error in production client & that is when i am doing test extraction for standard datasource using RSA3 i am geting following error:ERRORS OCCURED DURING EXTRACTION.
I checked the log and message is extraction program failed as it is called by an invalid infosource or object 0crm_lead_h.
note:0crm_lead_h is the DS
Any help
Thanks

Hi ,
Please follow below thread , it will solve ur problem.
Errors occurred during the extraction, Message nos. RJ012 & R3009
Hope this will help you...
Thanks,
Jitendra

Error when extracting data in rsa3

Hi,
we are using BI7.0. While when i am extracting data to PSA i am getting an error that error in source system. when i am extracting data in RSA3 source system side there also it was showing the same error. Data souce is active.
So please let me know if it as anything to do.
regards,
mahesh.

Hi,
Which datasource are you using to extract data ? Go rsa5 and try to activate it then retry.
Regards,
®

Transport error on datasource between client 200 & 220

When I transport datasource 0CS_ORDER_ATTR between 200 & 220 with SCC1 I get the following error
Copy Tables from a Client
Table                 Ins.     Del.     Upd. Func. kByte Time[sec] Time
Log -> See Transaction SCC3
Table ROMDDELTA is not client-specific
Table ROOHIECAT is not client-specific
Table ROOHIECOM is not client-specific
Table ROOSESRMAP is not client-specific
Table ROOSFIELD is not client-specific
Table ROOSOURCE is not client-specific
Table ROOSOURCET is not client-specific
Table ROOSSEG is not client-specific
Error in object R3TR1 OSOA2 3
Selected tables           :              8
Processed tables          :              0
Storage required (KB) :              0
Program ended with error or warning, return code: W
Runtime (seconds)         :              2
End of processing: 11:26:07
The datasource runs without error on 200 via RSA3 but dumps in 220 and I belive the errors above must be related to my errors in 220
Anyone know how I recify this error?
Thanks
Steve

Hi Bhanu,
   I din't do any enhancements to the Data Source . Simply I added sort statement in the Existing Start routine( Transfer Rules) . Just i want to transport that only. After Failing the transport ( Error Code 8) .....I checked my BW-QA system . The change which i made( Including Sort statement) is moved to QA but my transport is failed with the error code 8 .....
   Unless and untile the transport is successful i can not move it in to production ......
   So i think now you got my isse ....i.e my changes are moved to QA but the trasport is failed ...so please advise me what to do on this ..
waiting for reply

OATS: Error Creating datasource client connection

Hi All
When i try to add montiors in the OATS controller machine i am getting the following error .
Error while creating datasource client connection.
i am trying to monitor a linux machine. I am able to ping that machine from controller.
when i tried to do
plink.exe username@hostname i am getting the following error ...
FATAL error : Network error : Connection timed out..
Can anyone please help me on this??
Thanks

I'm not sure if this is the same problem but the following thread may help (mentioning the ports that may need opening on your firewalls)...
Re: What are the various ports used by OLT?
oracle.port.rmi=4444
oracle.port.http=8088
oracle.port.empstart=9001
oracle.port.uil2=7071
oracle.port.dataCollector=7073
oracle.port.webservice=8083
oracle.port.jndi.rmi=1098
oracle.port.jndi=1099
oracle.port.https=8433
* 9001 (Agent Comunication Port)
* 1099 (Datacollector Comunication Port)
* 8088 (for running OpenScript scripts)

Syntax error while checking extractor in rsa3

We are trying to check the extractor 2LIS_11_VAHDR in RSA3 , when we press the extraction button , we are getting following error :-
SHORT TEXT:-
Syntax error in sap "SAPLXRSA"
ERROR ANALYSIS :-
The following syntax error was found in the program SAPLXRSA:
" " S001BIWS " must be a flat structure. You cannot use internal tables , s"
" trings, references, or structures as components. "
Please suggest .

Hi Apoorva,
Though you have not done the enhancement of the given Data source. Still System first check for CMOD .
Make sure that all the enhancements are working very much fine.
Or just check for syntex error in se 38 for Program ZXRSAU01.
If there are any please correct it or comment it, then your data source will work very much fine.
Regards,
Krunal

Error transferring datasource in R/3

Hello
I am trying to transfer a datasource from R/3 to BW.I am planning to transfer and then replicate
When i go in RSA5 in R/3 and when i select the source and then click on Transfer it gives me error.the error is "The datasource is not assigned to application component"
What does this mean and how to solve it

Hi Jack,
Look at the following post for more info:
Re: Technical Content Transport
Hope this helps...

Error in datasource creation

Hi !
I have created a View and it is consistent without any warning.
Now i want to create a transaction datasource with this view . But it is giving an error .
Invalid Extract structure template <viewname> of <DS name >.
In the long text of the error it is giving that template structure quantity fields or currecy fields refere to different table .
In the suggestion , it is told to create a view with inadmissible fields . But these fields are taken from tables and these are necessary in the DS .
Please tell me what should I do ?

Hi,
Please search the forum. This problem has been discussed before.
Just as a pointer, you need to include the original currency and quantity tables as well alongwith the original table you've created the view on.
If you search, you'll get the complete solution for your problem.
Cheers,
Kedar

Getting error in datasource

Hi Experts,
i am having the data in DM1 but getting error in QM1 while extracting data in data source asBuffer Table not up-to-date after that it's going to dump issue in QM1 but few records are available when i am increasing data packets not getting the data.
please let me know if you any concerns.
Best Regards,
sowjanya.

Hi ,
Execute the SAP_RSADMIN_MAINTAIN program.
Enter the value RSAR_LONG_FIELDNAME in the 'OBJECT' field.
As of Support Package 16 (3.0B) and 10 (3.10 Content), you can take the name of the transfer structure from the longtext of error message RSAR 492. Enter this in the 'VALUE' field.
For lower Support Packages, you can take the name of the transfer structure from the TRANSTRU field of the RSISOSMAP table with:
OLTPSOURCE = Name of the DataSource
LOGSYS = Name of the source system
Hope that helps.
Regards
Mr Kapadia

Error in datasource

Friends,
Existing datasource added one object and transport to quality without deleting data in DTP. So i got error in quality datasource is not updating and not able to open DTP data. now i want to delete the data from that DTP.
please suggest me how to solve?
regards
Amulu

Hi Krishna,
What i understand from your question is that after enhancing your Datasource, you are unable to load data from PSA(Datasource) to DataTarget using DTP.
This is because if you already have Data loaded from PSA to the DataTarget(PSA is in initial Version 0)
When you have changed the Datasource & Activated, the PSA Version changes to "1").
If you need to upload Data from this Datasource, you can delete Data in the Target.
Replicate & further Activate the Datasource & then try loading using DTP.
Thanks,
ChandraDeepak

Error in datasource context lookup using OC4J

Hi friends
When I try to get de DataSource,
ictx = new InitialContext();
dat = (DataSource)ictx.lookup("jdbc/GirsaOracleDS");
conn = dat.getConnection();
I get te following error:
javax.naming.NameNotFoundException: jdbc/GirsaOracleDS not found
My data-sources.xml:
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="GirsaOracleDS"
location="jdbc/GirsaOracleCoreDS"
xa-location="jdbc/xa/GirsaOracleDS"
ejb-location="jdbc/GirsaOracleDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="girsa"
password="girsa"
url="jdbc:oracle:thin:@server-ora:1521:orcl"
inactivity-timeout="30"
/>
Can anybody help me?
thanks!

On Note 557738.1 - Export/Import, Section 5 Step 4, I executed "perl dpost_imp.pl dpost_imp.drv" on the source server and created the required driver. Moved to the target and when applying with adpatch, it failed with:
AutoPatch error:
adprdf(): At line 62 in file dpost_imp.drv:
Error extension recordpatch line missing from patch driver file.
You should check the file
I opened an SR yesterday and after many hours, I was told to:
a) backup current file dpostimpl.drv
b) edit driver file dpostimpl.drv and made the following change
# dpost_imp.drv generated by dpost_imp.pl
begin aru fix_postimp
compatible release 12.0.0
begin bug au fix_postimp
begin actions
TO
# dpost_imp.drv generated by dpost_imp.pl
begin aru fix_postimp
compatible release 12.0.0
extension recordpatch 6924477 US
begin bug au fix_postimp
begin actions
c) Save and re-try apply driv dpostimpl.drv via autopatch.
I did the changes, ran adpatch and the error is still there:
adpatch logfile=dpost_imp.drv2.log patchtop=/EBS_12i_downloads/patches driver=dpost_imp.drv workers=8
AutoPatch error:
adprdf(): At line 68 in file dpost_imp.drv:
'end bug au fix_ctxsys' encountered while 'bug au fix_postimp' is open
Line 68 is:
end bug au fix_ctxsys
Has someone got knowledge of what is needed here?You are applying an 11i patch (as you are following [ID 557738.1]) so the "compatible release 12.0.0" line is not correct and it should be "compatible release 11.5.0" instead. Are you sure you are referring the steps in (Export/import notes on Applications 11i Database 11g [ID 557738.1]) not the steps in (Export/import process for R12 using 11gR1 or 11gR2 [ID 741818.1]) or (Export/Import Process for Oracle E-Business Suite Release 12 using 10gR2 [ID 454616.1])?
Have you already updated the SR with the outcome of their change?
Thanks,
Hussein

Error Registering Datasource

Hi, I am having difficulty registering a datasource to iAS. The server
instance of iAS I am using is named crgserver(10817).
When I use the [register] feature in Forte Runtime tab to register a
datasource, I get this error:
"crgserver :Error : could not log on to crgserver"
If I try to use iasdeploy from command line with the string:
"iasdeploy regdatasource MembershipDS.xml" I get this response:
"iasdeploy for iPlanet Application Server 6.0 SP3
Connected to LDAP server on crgserver port 389
No servers registered in the registry"
I also cannot register a server in iASAT. I get a logon error.
Thanks for your help

Hi,
The error "No servers registered in the registry" makes me to feel
that your iAS is not registered using the iASAT. Please open the iASAT and
check if your server has been registered. Now, if you are not able to
register iAS using iASAT then here are the following posibilities...
- check if iAS is running properly(you may check this in windows by
enabling the option interact with desktop in the services. In Unix systems
you can check the KJS logs)
- your logon credentials are wrong(either username/password)
- ensure that your LDAP server is running.
- check what your ip address is(is it static or dynamically generated
using dhcp server ? also 127.0.0.1 will not help)
- check what your DNS name is ?
Please let me know if this helps.
Regards
Raj
Raymond Gerz wrote:
Hi, I am having difficulty registering a datasource to iAS. The server
instance of iAS I am using is named crgserver(10817).
When I use the [register] feature in Forte Runtime tab to register a
datasource, I get this error:
"crgserver :Error : could not log on to crgserver"
If I try to use iasdeploy from command line with the string:
"iasdeploy regdatasource MembershipDS.xml" I get this response:
"iasdeploy for iPlanet Application Server 6.0 SP3
Connected to LDAP server on crgserver port 389
No servers registered in the registry"
I also cannot register a server in iASAT. I get a logon error.
Thanks for your help

Error in Datasource 0FI_AP_51 in RSA3

Similar Messages

Maybe you are looking for