Error in date prompt after migrating from 5.x to XI R2
Hi,
We have migrated from 5.x to XiR2 SP5 and are facing a problem with the date input parameter.
Our users use DESKI , when they try to access thier reports based on Stored Procedure,and the reports having date prompt , they get an error.
In 5.x they used to enter the date as DD MON YYYY , in XIR2 they enter it as MM/DD/YYYY but still we get the error
"The variable is of type date enter its value in the format 9/17/2009 14:50:00 PM"
The users tried this too but still the same error persists. The Oracle.prm and Oracle.sbo file on teh users machine is the same as that of the server.
I am able to recreate this error after logging onto the server and opening DESKi there. This error is occuring only with Stored procedures that take date as input parameter
has anybody faced this issue before, any resolutions for this
Thanks in advance
Shreekantha
Hi,
After analyzing this problem , what we found that no Stored Procedures that take user input are functioning, irrespective of teh datatype of the input prompt.
For all SPs that take user input we get an error saying
Connection or SQL sentence error: (DA0005)
Exception: DBD, ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'PROCEDURE_TEST_WITHOUTDATE'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
State: N/A
Similar Messages
-
Outlook Authentication prompt after migrating from 2007/2013
I have a very simple environment. 3 new Exchange 2013 servers in a DAG behind a load balancer. Most users are still on Exchange 2007 environment. Autodiscover has been configured for load balanced name. There is no External Outlook
Anywhere connectivity. I have NOT enabled Outlook Anywhere in the 2007 environment. I have a simple Lync 2013 environment. 1 Server in a standard pool with no external connectivity. I have integration with OWA 2013 and Lync working.
All versions of Outlook are at least on the patch level required for Exchange 2013.
My issue is random password prompts in Outlook for some (not all) users with mailboxes on Exchange 2013. This password prompt appears to be coming from the load balanced Outlook anywhere name. I have had a few reports of users on Exchange 2007
getting an error stating they cannot open default set of folders. If I have them exit Lync 2013 client and open Outlook again it works fine. They can then open Lync without issue. Closing and opening Outlook will no longer reproduce the issue.
It seems like Lync is causing an issue here somewhere, but I have no idea where.
Lync BPA completes without any warning or errors. All test cmdlets complete without any errors.
2013 Outlook Anywhere settings:
Name : Rpc (Default Web Site)
ExternalHostname :
InternalHostname : mail.company.com
ExternalClientAuthenticationMethod : Ntlm
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}
Get-AutodiscoverVirtualDirectory|select *auth*
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity, OAuth}
ExternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity, OAuth}
LiveIdNegotiateAuthentication : False
WSSecurityAuthentication : True
LiveIdBasicAuthentication : False
BasicAuthentication : True
DigestAuthentication : False
WindowsAuthentication : True
OAuthAuthentication : True
AdfsAuthentication : False
brian smithI just could not let this go last night. The issue was occurring when I moved a mailbox to 2013.
2 scenarios
#1. Users mailbox moved from 2007 to 2013. Profile has a secondary mailbox that is still on 2007. When entering Outlook they are prompted for
a password into the internally resolvable load balanced name (mail.company.com). If I remove this secondary 2007 mailbox they work fine, UNTIL they try to access anything on 2007 (calendar, Public Folder, another mailbox, etc). When they do attempt they
are prompted for a password.
I have seemingly fixed this error by adding the external URL back to AutoDiscover on 2013 based on
http://support.microsoft.com/kb/2839517<u5:p></u5:p>. Even though we have no intentions of using Outlook Anywhere externally.
During this troubleshooting I also changed InternalClientsRequireSsl from false to true. Now I have clients reporting errors in their event log “A fatal error occurred while
creating an SSL client credential. The internal error state is 10013." I do not think changing this to require SSL, but I’m almost scared to change it because this issue
is seemingly resolved.
#2 mailbox that is only accessed as a shared mailbox Mailbox is moved from 2007 to 2013. Users attaching to the mailbox are still on 2007. This works perfectly fine for some. However others receive a password prompt each time they open Outlook.
If the 2013 mailbox is removed from their outlook profile they receive no prompt. If I manually remove the mailbox from their profile and add it back the prompts go away. I have not been tracking client versions, but these last 4 are running 12.0.6691.5000.
I also noticed in checking the connection status all 2007 references are using [Nego] for authentication and mail.company.com is using NTLM. Is this normal? This is the same in my test environment, but I can’t replicate this issue in my test environment
either.
I’m very stumped.
2013 Outlook anywhere config:
ExternalClientAuthenticationMethod : Ntlm
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}
SSLOffloading : True
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : True
2007 Outlook anywhere config:
ExternalClientAuthenticationMethod : Ntlm
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm}
SSLOffloading : True
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : False
brian smith -
NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g
NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya -
Problem with Java Native Type after Migration from 7.0 to 7.1
Hi,
after Migration from Netweaver 7.0 to Netweaver 7.1 I get following error:
FileDownload 'FileDownload.data': Context attribute 'PrintSelectedView.PdfToDownload.resourceInputStream' has the Java native type 'com.sap.tc.webdynpro.progmodel.api.IWDInputStream' and cannot be bound to this property. Hint: Remove the binding or bind a context element matching the property's type.
What have I done wrong?
How could I fix this problem?
Best regards,
PeterHi,
thanks, this solved the problem.
Thank you.
Best regards,
Peter -
After Migrating from 10g to 11g Geeting problems with Guided navigations.
After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;" -
Error while activating DSO after loading from another DSO..Production issue
Hello Gurus,
I got an error while activating DSO2 after loading from another DSO1.
DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
>Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
>Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
this theard was posted after searching for related post in SDN.
and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
is their any similar Function Module in BI 7.0 please advice.
We are using SAP NetWeaver BI 7.0
Release- 700 Service level- 017
Thanks in advance
Sandysloved the issue......
it was due to wrong data for the related field...
it must be "0009 "
Thanks for ur support. closing the ticket
Regards
Sandy -
ZCC Login failed after Migration from 11.3.1 FRU1 to 11.3.2
Hey,
System: 6 Primary Server Sless 11 SP3
LDAP: EDIR
Primary: 11.3.2
Sats: 11.3.1 FRU1
After Migration from 11.3.1 FRU1 to 11.3.2
i'll try to login in ZCC
Message ZCC
Error: Login Error: com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
See the ZENworks Control Center log file (zcc.log) for the full stack trace.
I tryed with default admin and see that the USERSource is not reachable.
I take a look in the configuration / usersource and there is an Error like: Unable to read contexts. One or more of your connections don't support non-SSL.
ZCC.log sayed
[javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException] [ZENServer]
[DEBUG] [12/30/2014 09:54:02.417] [3547] [ZENServer] [72] [zenworks] [ZCC] [] [Form.java CSRF TOKEN:d1b804076c63e7393af1a72442ced4b5 for the PageId:authoritativeSourceDetails] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.144] [3547] [ZENServer] [85] [zenworks] [ZCC] [] [QuickTask build tasks called in createChildControls, normal flow before ajax] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.348] [3547] [ZENServer] [69] [zenworks] [ZCC] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:179)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. validateCertificateExpiry(LDAPUtil.java:1162)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:774)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:559)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:386)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:359)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:325)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:311)
at com.novell.zenworks.core.web.internal.UserSourceSt atusAJAX.getImageData(UserSourceStatusAJAX.java:77 )
at com.novell.web.ajax.ImageAJAX.service(ImageAJAX.ja va:38)
at com.novell.web.ajax.AJAXDataHandler.service(AJAXDa taHandler.java:40)
at com.novell.web.AjaxServlet.serviceImpl(AjaxServlet .java:100)
at com.novell.web.AjaxServlet.service(AjaxServlet.jav a:74)
at com.novell.zenworks.fw.web.internal.ZENworksAjaxSe rvlet.service(ZENworksAjaxServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet .java:727)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at com.patchlink.sapphire.web.pages.vulnerability.ses sion.HibernateSessionFilter.doFilter(HibernateSess ionFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:241)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at org.apache.catalina.core.StandardWrapperValve.invo ke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invo ke(StandardContextValve.java:122)
at org.apache.catalina.authenticator.AuthenticatorBas e.invoke(AuthenticatorBase.java:501)
at org.apache.catalina.core.StandardHostValve.invoke( StandardHostValve.java:171)
at com.googlecode.psiprobe.Tomcat70AgentValve.invoke( Tomcat70AgentValve.java:39)
at org.apache.catalina.valves.ErrorReportValve.invoke (ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invok e(StandardEngineValve.java:116)
at com.novell.zenworks.tomcat.ZENRequestValve.invoke( ZENRequestValve.java:1346)
at org.apache.catalina.connector.CoyoteAdapter.servic e(CoyoteAdapter.java:408)
at org.apache.coyote.http11.AbstractHttp11Processor.p rocess(AbstractHttp11Processor.java:1070)
at org.apache.coyote.AbstractProtocol$AbstractConnect ionHandler.process(AbstractProtocol.java:611)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProce ssor.run(JIoEndpoint.java:316)
at java.util.concurrent.ThreadPoolExecutor.runWorker( ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run (ThreadPoolExecutor.java:615)
at org.apache.tomcat.util.threads.TaskThread$Wrapping Runnable.run(TaskThread.java:61)
at java.lang.Thread.run(Thread.java:745)
Caused by: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.Alerts.getSSLException(Alerts.jav a:192)
at sun.security.ssl.SSLSocketImpl.fatal(SSLSocketImpl .java:1884)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:276)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:270)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1439)
at sun.security.ssl.ClientHandshaker.processMessage(C lientHandshaker.java:209)
at sun.security.ssl.Handshaker.processLoop(Handshaker .java:878)
at sun.security.ssl.Handshaker.process_record(Handsha ker.java:814)
at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocke tImpl.java:1016)
at sun.security.ssl.SSLSocketImpl.performInitialHands hake(SSLSocketImpl.java:1312)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1339)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1323)
at com.novell.zenworks.security.certificates.Certific ateUtility.getCertChain(CertificateUtility.java:12 1)
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:175)
... 35 more
Caused by: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.AbstractTrustManagerWrapper.check AlgorithmConstraints(SSLContextImpl.java:946)
at sun.security.ssl.AbstractTrustManagerWrapper.check AdditionalTrust(SSLContextImpl.java:872)
at sun.security.ssl.AbstractTrustManagerWrapper.check ServerTrusted(SSLContextImpl.java:814)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1421)
SR has been created.
Any Tipps /Hints for me ?
Thank YouOriginally Posted by robpet
Should have said kind of the same problem...
That was sort of my gut feelings so I checked our certificates beforehand and they are using certs with sha1 fingerprint. But we are not using SSL - our connections are made using port 389. And the communication status is green.
But I cannot add SSL because it complains about "unable to obtain a valid certificate for SSL communication information. Please verify that the adress and port are correct and that the LDAP directory has been configured with a valid certificate.
So I cannot understand why users cannot authenticate with zenagent.
There's a TID about zcc login failures after 11.3 upgrade.
https://www.novell.com/support/kb/doc.php?id=7014716
We ran into the above. -
Testing of SAP BW system after migration from OS Unix to windows
Hi Experts,
I am working on a project wherein testing of BW system is required after migration from OS Unix to Windows.
If any one has done same set of activities in past or has any idea of this, please share all major test steps required after migration.
Thanks in advance.
Regards,
NeerajHi Neeraj,
I will paste the list we used for our upgrade from 3.1 to 7.0. I removed some company specific details. Sorry for the "lay-out", it is copied from excel, this messes up the whole message.
best regards, André.
Preparation PHASE 1
Review New Functionality Review BW section on SAPNet for latest information on new release
Confirm Upgrade Timing (First Sat)
GUI Upgrade Install GUI's for Upgrade Test persons
"Check Prerequisites -Operating System
-SAP Kernel
-DBMS
-Disk space
-R/3 plugin
-BW software version and SP
Citrix.."
"Check Compatibility Reqs with other systems APO
ECC6.0"
Check Compatibility Reqs with 3rd party software ?
"Test Team 2004s Delta Training To
have idea on new functionality
not have confusion if looks different.."
"End User Communication: upgraded system and changes e.g. right vs left click
- send out communication twice"
End User Communication: several "look and feel" sessions NOTE: incorporate WISBECH !!!
Setup Portal connected to BW QA for testing once upgraded Setup Portal connected to BW DEV for testing once upgraded
Check best go live date - based on assuption 2 days needed
Determine test set - based on input BS / KU
Estimate resources Business for testing
BluePrint PHASE 2
Check/CleanUp Development Objects Check all open and not-released developments for release prior to upgrade
Prepare System Setup Prepare (if needed) flat-files for test loads
Check OSS for release notes on objects Each functional area should check out OSS for release notes on objects (for changes etcu2026, new functionality)
"Prepare (detail) list of objects to be tested Complete list of objects to be tested, special attention to custom/non-standard programs, enhancements. List of:
- extractors
- process chains
- reports"
"Setup delta mechanisms (create transaction data) BackEnd Test: Financial Extraction and load, process chains
u2022tbd
u2022
u2022 "
Verification / creation of process chains Check existence of to-be-tested process chains; if none, create 'sample' process chains
Realization PHASE 3
Prior to Upgrade: Install any necessary frontend software
Prior to Upgrade: Install any necessary frontend software (end-users)
Prior to Upgrade: Complete any extraction - suspend V3 and scheduled BW jobs
Create Sandbox
Connect Sandbox to external systems (connections/BDLS)
Pre-upgrade steps
Perform Upgrade of BW
Check connection with R/3/APO
Perform system backup
"BackEnd Test: Logistics extraction and load, process chains
u2022 Z_example_CHAIN
u2022 2lis_03_BF and 2lis_03_BX Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Sales Extraction and load, process chains
u2022 Z_SALES_1
u2022 all lis extractors:
u2022 12_vcitm
u2022 13_vditm
u2022 11_vaitm
u2022 11_vahdr
u2022 11_v_ssl
u2022 11_vasti
u2022 12_vcscl
u2022 selection of z-extractors
Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Financial Extraction and load, process chains
u2022 0FI_GL_4
u2022 NOTE: no further extractors are chosen for testing
u2022 tbd Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Master Data... Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Zxxx Extraction and load, process chains
u2022 Z_TRANSACTION_DATA
u2022 Zxxx
u2022 Zyyy Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Plant Maintenance Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: PP Extraction and load, process chains Test: load from Zxxx
"BackEnd Test: Purchasing Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: APO Extraction and load, process chains
u2022 ZAPOxxx
u2022 ZAPOyyy
u2022 others can be tested, but were not included in de testset Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: Regular Schedule - Production
BackEnd Test: Flat file upload Test: 2 types from server and PC
BackEnd Test: Test Admin Workbench: creation of objects, change existing Test the Admin Workbench: creation of infoobjects, change infoobject, create/change hierarchy, create cube,u2026
BackEnd Test: Test Bex: creation of queries (kf etc...); change existing Creation of new query/ change query, create condition, calculated/restricted kf, variables,..
BackEnd Test: Issue handling
Development box issue fixing - on forehand apply fixes based on issues BWQ
FrontEnd Test: Run Logistics Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Sales Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Supply Chain Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Financial Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Controling Reports Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Master Data and Special Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run PM Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Purchasing Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run APO Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Issue handling
FrontEnd Test: Make before image of reports - Production Run reports; save of before image to compare once upgraded
FrontEnd Test: Run All Reports - Production Run reports, execute various navigation steps, compare with 'before image' taken in prevous step
Test Security Test security with various end-user roles/IDS other than BW developer (usually has * ALL)
Test Portal integration Test portal with various end-user roles/IDS other than BW developer (usually has * ALL)
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM -
Severe Time Drifting after Migration from 10.5.8 - Help!
Hey everyone, I'm hoping someone can help me out or shed some light on a very odd issue that came about this morning. I'm really having a hard time figuring out a fix.
I recently upgraded one of my old Mac mini servers to some new, (to me), hardware. The old server was a last-gen G4, and the new one is a late 2006 Intel.
The migration went totally fine, and all services are responding and working as expected. This server really isn't used for all that much, so I didn't anticipate any real issues in upgrading from 10.5.8 (PPC) to 10.6.7 (Intel). But after checking everything over this afternoon, I landed on a really weird issue.
I can literally watch the time progress slower on this server. Really. The seconds pass slower, and after about an hour, it will be up to five minutes behind all the other servers in my infrastruture. The server is setup to watch time.apple.com as it's NTP, and there's no change with another NTP server. I can grep the NTPd and it seems to be working fine. I've "started fresh" by removing ntp.conf and ntp.drift, rebooted, and had NTPd recreate them after setting new time and date preferences. That seems to have helped a *bit* but it's still persisting. Time zone information is correct. I've even turned off time sync altogether and it still persists, so it's got to be a local issue with the system.
Now, after some pondering, I believe I know what's causing the issue. The person I inherited the server from replaced the stock 1.5 Core Solo with a 1.66 Core Duo, which I've seen done plenty of times before, and never heard any real issues with. And I did physically check the upgrade, and everything seems to be perfect. The system sees both cores fine, and everything is stable. Except this very odd time/clock issue. This is the only root cause that I can possibly think of for it doing this.
And what's odd, is that if the time is wrong in the menu bar, and I go into the Time and Date prefpane, it instantly updates to the right time.
Now really, this isn't *that* big of a deal for this server. None of it's services rely on perfect time, (Kerberos and whatnot), but it's still rather annoying, especially for Time Machine backups. My main curiousity is if anyone knows how to increase the interval for NTP syncing with time.apple.com, so it'll check every hour or so, (I believe it checks every 12 by default. Correct me if I'm wrong).
TL;DR
After migrating from Leopard Server (PPC) to Snow Leopard Server (Intel), my system clock is running about five minutes slow per hour. Suspecting processor upgrade is to blame. How can I increase NTP syncing interval with time.apple.com?
Thanks in advance everyone!You can add/modify the minpoll and maxpoll values in ntp.conf. This should allow you to set the time poll and reset a bit more aggressively.
The Xeon chips have been notorious for time skew. I've not seen the same with CoreDuo and Core2Duo.
You may also just want to periodically stop and start the NTP process. This can be down using systemsetup command: systemsetup -setusingnetworktime on/off
In corporate environments with Windows time servers that reboot frequently, I tend to automate a script that stops network time, waits a few seconds, and then starts it again. This will force a sync.
Hope this helps. Oh, and by the way, time is critically importation to Kerberos authentication and authorization from the client. Next the DNS, time is the most common cause of access denial. Keep DNS and time healthy. -
After migration from SP2010 to SP2013 event receiver code is not working
we have two lists work order list and estimation list. we developed infopath form for work order list , in that we have work order field we don't enter the value of that field after filling the all fields when i clicked save button work order ID field
will generate automatically and estimation hyper link will generate.when i click on estimation link estimation list will open, inthat list we have work order id filed it has to generate automatically(It will fetch the data from work order list). For generating
automatically we written event receiver code in visual studio 2010.After migration from SP2010 to SP2013 it is not working. May i know what modification we have to dotry these links:
http://sharepoint.stackexchange.com/questions/75491/sharepoint-2013-event-receiver-on-custom-list-definition-not-firing
http://www.sharepointdiary.com/2011/08/fix-missing-event-receivers-issue-in-migration.html
http://stackoverflow.com/questions/28298707/we-have-event-receiver-code-issue-after-migration-from-2010-to-2013
https://www.linkedin.com/groups/SharePoint-migration-designer-workflow-runs-3664766.S.5905212303858479106
http://channel9.msdn.com/Series/Reimagine-SharePoint-Development/Migrating-a-SharePoint-Event-Receiver-to-a-Remote-Event-Receiver
Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing -
Whether using Oracle after migrating from MySQL be easy or not?
Though oracle is tough secured one, I don't know exactly the complexity of using Oracle database. Using MySQL 4.1.22 in my website https://www.puntercalls.com/ . Though the site is based on providing share market tips, it deals with a huge amount of stock market data and in much more real time basis hand-to-hand with NSE and BSE info which means a tough security is the utmost demand of the time.
My question is whether using Oracle after migrating from MySQL be easy or not. You can check my site at https://www.puntercalls.com/ for different real time data updation parts.
Kind suggestions are greatly appreciated in advance!
Edited by: 968684 on Oct 31, 2012 7:04 AMHi,
As you are really asking about how to setup and use securioty features in an Oracle database it woul db ebetter to raise the question in this forum -
Forum: Database Security - General
Database Security - General
They will have more knowledge about Oracle security features and which it would be best for you to use.
Regards,
Mike -
Can only access emails through OWA after migration from exchange 2007 to 2013
can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
needed RCA ... plz help..Hi,
From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g
Dear Gurus,
Need your help regarding the following problem:
After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
Additional Information:
OS: AIX
NLS_LANG = UTF8
fmrweb_utf8.res also contains the same text for Ctrl+B as above.
I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
Best Regards,Dear Gerd,
"are you sure, that it is the hotkey"
Yes, i am dead sure. Since:
(1) It was working fine in forms 6i
(2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
Regards -
Mail "unexpectedly quits" after migration from snow leopard to new iMac running Mountain Lion
Mail "unexpectedly quits" after migration from snow leopard time machine files to new iMac running Mountain Lion. I can run connection doctor OK. But the activity window is blank. If you try to open message viewer window then mail program crashes. Would really like to get my old emails back as the old imac is totally dead. Thanks for any help.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
Cant find my iTunes library after migration from old PC to new Mac
Can't find my iTunes library after migration from old PC to new Mac?
Migration Assistant has transferred itunes content, but where is it on new iMac?
https://discussions.apple.com/thread/3358162?start=0&tstart=0 <<< click here for a possible answer.
Maybe you are looking for
-
Live cam voice ......errr Help please
HI all, I wish i never uninstalled my web cam....never had it working since. I;ll put you all in the picture....Dell, Win XP Pro, SP3, and trying to install Live cam voice..... Unfortuantely i think i have misalid !! the main CD it came with. I have
-
Error after clicking browse button to select SQL db for UPK 3.5.1 install
I receive an error when I reach the point of selecting a database server in the UPK 3.5.1 Developer install. It asks for the SQL Login information and whne I click the Browse button, I get an error box that says: An error (-5011 : 0x08000ffff) has oc
-
Facebook application grow large file size
Why facebook applications grow larger and larger file size. What can I do. Since this program is to use the file size is big time. I use facebook version 4.0.3 on iphone4 run on iOS 5.0.1. thank you. Eak.
-
Administrator option in Analytics
I am not sure what was change but I can no longer see the Administation option in analytics with the highest level login we have or any other for that matter. Any ideas how to fix this? We use external table authentication. I've tried adding all appl
-
PO Matched Invoice - Want to add some Expense
Dear Experts, I have a scenario where I have created one Invoice for 1000 USD with PO Matched and my requirement is I want to Include 50 USD in PO Matched Invoice now.. any one can help me regarding this Please.. Thanks Bharath