Error in DB13 backup
Hi All,
we have ecc6 sr3 oracle 10 2 ,win server 2003.
We have taking backup through DB13 , but after the ending of 100% is showing the error below:
===============================
#FILE..... G:\ORACLE\DEV\SAPDATA1\SYSTEM_1\SYSTEM.DATA1
#SAVED.... G:\oracle\DEV\sapbackup\bebwnvvg\SYSTEM.DATA1 #1/40
BR0280I BRBACKUP time stamp: 2009-11-10 14.18.13
BR0063I 40 of 40 files processed - 104800.313 MB of 104800.313 MB done
BR0204I Percentage done: 100.00%, estimated end time: 14:18
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2009-11-10 14.18.14
BR0317I 'Alter tablespace SYSTEM end backup' successful
BR0280I BRBACKUP time stamp: 2009-11-10 14.18.17
BR0530I Cataloging backups of all database files...
BR0278E Command output of 'E:\oracle\DEV\102\BIN\rman nocatalog':
Recovery Manager: Release 10.2.0.2.0 - Production on Tue Nov 10 14:18:19 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN>
RMAN> connect target *
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
ORA-12640: Authentication adapter initialization failed
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of catalog command at 11/10/2009 14:18:20
RMAN-06171: not connected to target database
RMAN>
Recovery Manager complete.
BR0280I BRBACKUP time stamp: 2009-11-10 14.18.20
BR0279E Return code from 'E:\oracle\DEV\102\BIN\rman nocatalog': 1
BR0536E RMAN call for database instance DEV failed
BR0280I BRBACKUP time stamp: 2009-11-10 14.18.20
BR0280I BRBACKUP time stamp: 2009-11-10 14.18.20
BR0532E Cataloging backups of all database files failed
BR0056I End of database backup: bebwnvvg.fnd 2009-11-10 14.18.20
BR0280I BRBACKUP time stamp: 2009-11-10 14.18.20
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2009-11-10 14.18.20
BR0291I BRARCHIVE will be started with options '-U -jid FLLOG20091110131939 -d disk -c force -p initdev.sap -sd'
BR0280I BRBACKUP time stamp: 2009-11-10 14.18.56
BR0292I Execution of BRARCHIVE finished with return code 0
===============================
rgds
aftab
Hi,
*ORA-12640: Authentication adapter initialization*
In SQLNET.ora file
Put on comment the line SQLNET.AUTHENTICATION_SERVICES= (NTS) by adding a # at the beginning
Then you have #SQLNET.AUTHENTICATION_SERVICES= (NTS)
Then try again.
Thanks,
Shambo
Similar Messages
-
Error in DB13 scheduled backup
Hi All,
We schedule db13 backup in SAP on DB6 database (WIN2K3 OS) the backup is completing successfully but it was giving couple of errors in JobLog. Please find the error messages as follows
"Action deleted in SDBAP at 20061129225959"
"Job cancelled after system exception ERROR_MESSAGE"
Can any one tell me is there any problem with this error. Or can i ignore if we ignore this error can we able to restore this backup file?
Thanks in advance.....
Eshwar BHi Eshwar,
This is a message related to jobs which have been scheduled periodically. If someone deletes such a periodic job in DB13, the job in SM37 is not deleted immediately but only gets an invalidation timestamp. If the invalidated job tries to start again in SM37, it fails with the error message you experienced.
Normally you can ignore this, as long as DB13 itselfs shows correct results. You should not interprete the jobs in SM37 only.
Depending on your SAP release there is a background job which cleans up such invalidated SM37 jobs
Best regards
Ralf -
Db13 backup error with mssql as database
Hi
While scheduling the backup through db13 i got the following error msg.i mdoing the backup on disk
Task information ***********
Jobname:
SAP CCMS Full DB Backup of DEV,master,msdb [20090825163455]
Taskname: Step1
Type: TSQL
DB-Name: DEV
Lastrun: 20090826 07:00:01
Nextrun: not scheduled
Created: 2009-08-25 16:34:55.
Command: dev.sap_backup_databases
@dblist="DEV,master,msdb",@r3db="DEV",@bdev="db1
3 backup",@unload=0,@verify=0,@jobname= "SAP CCMS
Full DB Backup of DEV,master,msdb [20090825163455]
Descript: SAP CCMS JOB
Task history information ***********
For run: 20090826 07:00:00
Status: 0 (failure) (see DB error log)
Message: 156
Severity: 15
Duration: 0 hours, 0 minutes, 0 seconds
Duration: 0 hours, 0 minutes, 0 seconds
Last msg: Executed as user: NT AUTHORITY\SYSTEM. DBCC execut
ion completed. If DBCC printed error messages, con
tact your system administrator. [SQLSTATE 01000] (
Message 2528) Incorrect syntax near the keyword '
WITH'. [SQLSTATE 42000] (Error 156). The step failed.
i have set the backup device name as db13 backup. is that the problem.
Plz help meHi Pranav,
Could you please tell us what was the issue so that if any body face the issue again then he will get help from this thread.
Regards
Ashok Dalai -
Errors in Offline Backup via DB13 SAP & Oracle on Linux
OS: Linux Database : Oracle Systems Affected : Production & Disaster Recovery Server
Hi
We have offline backup scheduled every friday via SAP the backup runs fine & copies all the files in the backup directory but when i go see the backup logs in DB 14 i see the Offline Backup ending with Error Code 0005 & when i see the Detail logs i see following in red
BR0278E Command output of '/oracle/UHP/102_64/bin/sqlplus /nolog < /oracle/UHP/sapbackup/.beelhrfo.spi':
BR0279E Return code from '/oracle/UHP/102_64/bin/sqlplus /nolog < /oracle/UHP/sapbackup/.beelhrfo.spi': 0
BR0302E SQLPLUS call for database instance UHP failed
BR0306E Start and open of database instance UHP failed
Also if i check the BRARCHIVE i see them ending with following errors in Detail Log
BR0278E Command output of 'LANG=C cd /oracle/UHP/sapreorg && LANG=C cp spaceUHP.log paramUHP.log /backup/UHPARCH//UHP':
cp: cannot create regular file `/backup/UHPARCH//UHP/spaceUHP.log': Permission denied
cp: cannot create regular file `/backup/UHPARCH//UHP/paramUHP.log': Permission denied
BR0280I BRARCHIVE time stamp: 2010-10-30 23.02.40
BR0279E Return code from 'LANG=C cd /oracle/UHP/sapreorg && LANG=C cp spaceUHP.log paramUHP.log /backup/UHPARCH//UHP': 1
BR0222E Copying space_log to/from /backup/UHPARCH//UHP failed due to previous errors
BR0202I Saving /oracle/UHP/saparch/aeelofvf.svd
BR0203I to /backup/UHPARCH//UHP ...
BR0202I Saving /oracle/UHP/saparch/archUHP.log
BR0203I to /backup/UHPARCH//UHP ...
BR0278E Command output of 'LANG=C cp /oracle/UHP/saparch/archUHP.log /backup/UHPARCH//UHP':
cp: cannot create regular file `/backup/UHPARCH//UHP/archUHP.log': Permission denied
BR0280I BRARCHIVE time stamp: 2010-10-30 23.02.40
BR0279E Return code from 'LANG=C cp /oracle/UHP/saparch/archUHP.log /backup/UHPARCH//UHP': 1
BR0222E Copying /oracle/UHP/saparch/archUHP.log to/from /backup/UHPARCH//UHP failed due to previous errors
Please also note that we have a Disaster Recovery Server too & the above mentioned errors are in our (Production )Primary Database & once this backu finished the DR Server stops getting any log files, this happens only when this offline backup on every friday runs,
Issues
The backup ends with errors although the backup file is generated & all data is copied
DR Server dont get redo log files after this offline backup on every fridayfor the Cp errors i will see the permissions in backup/UHP ( this error is happening in online backup ) my main concern is the error occured in offline backup as it is somehow connected with our DR SERVER NOT GETTING THE LOG FILES EVEN AFTER THE SYSTEM IS UP ( yes if the primary is down no logs will be shipped to standby i know that but even after the primary is up after a offline backup via SAP via DB 13 the standby dont get any log files unless i restart the database and SAP )
So the error in the offline backup mentioned above in my post occurred at 29 OCT 15: 45 20
BR0302E SQLPLUS call for database instance UHP failed
BR0306E Start and open of database instance UHP failed
after this my primary database comes up & sap starts but the DR server dont get any logs & also the backup logs show the above errors in red
Given below is the text from Oracle alert file for the same time duration when the system tries to start the database & the above mentioned error comes up in opening the database time Stamp : OCT 29 15: 45 20
Deprecated system parameters with specified values:
log_archive_start
End of deprecated system parameter listing
This is the only oracle alert log errors i can find relevant to database instance errors from DB 14
moreover in the alert file it also starts the data broker service relevant to i guess DR server in that all seems fine it starts everything then it gives this error & then keeps giving errors ( from oracle alert log file )
Error 12154 received logging on to the standby
Fri Oct 29 15:45:37 2010
Errors in file /oracle/UHP/saptrace/background/uhp_arc0_12086.trc:
ORA-12154: TNS:could not resolve the connect identifier specified
FAL[server, ARC0]: Error 12154 creating remote archivelog file 'UHR'
FAL[server, ARC0]: FAL archive failed, see trace file.
Fri Oct 29 15:45:37 2010
Errors in file /oracle/UHP/saptrace/background/uhp_arc0_12086.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
Fri Oct 29 15:45:37 2010
ORACLE Instance UHP - Archival Error. Archiver continuing
& then keep on saying given below error in oracle alert log file
Fri Oct 29 15:51:32 2010
Errors in file /oracle/UHP/saptrace/background/uhp_arc8_12102.trc:
ORA-12154: TNS:could not resolve the connect identifier specified
PING[ARC8]: Heartbeat failed to connect to standby 'UHR'. Error is 12154.
Thanks for your help again i would appreciate a little more assistance on this.
Edited by: Prashant Shandilya on Oct 31, 2010 12:18 PM -
BR0261E BRBACKUP cancelled by signal 15- Error in Archivelog backup to tape
Dear All,
I am facing the backup issue for long time. i have tried with different solution. But still i couldnot clear.
Please help me to clear the issue.
System Details :
OS : HP-UX
DB : ORACLE 9.2.0.6.0
SAP : ECC6 , Kernel : 304 and DBTOOL : 52 (latest one).
I am taking the database and arch backup into tape.
Tape and init<SID>.sap details : tape_address = /dev/rmt/0mn, tape_address_rew = /dev/rmt/0m, tape_size = 400000M,
expir_period = 0, tape_use_count = 300
Database backup is fine and archive log backup also taking but end of the process its throughing the error.
BR0261E BRBACKUP cancelled by signal 15.
Arch Log error :
BR0278E Command output of 'LANG=C cd /oracle/VRD/sapreorg && /usr/sap/VRD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt/0mn':
640 blocks
BR0280I BRARCHIVE time stamp: 2010-05-12 10.16.16
BR0279E Return code from 'LANG=C cd /oracle/VRD/sapreorg && /usr/sap/VRD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt/0mn': 0
BR0359E Restore of /oracle/VRD/sapreorg/.tape.hdr0 from /dev/rmt/0mn failed due to previous errors
BR0218E Checking label on volume in device /dev/rmt/0mn failed
BR0280I BRARCHIVE time stamp: 2010-05-12 10.16.16
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0007I End of offline redo log processing: aedfcnau.svd 2010-05-12 10.16.35
BR0280I BRARCHIVE time stamp: 2010-05-12 10.16.35
BR0005I BRARCHIVE terminated with errors
Please advise on this.
With Regards,
Senthil Kumar.CDear Joe,
Thanks for your reply.
can change the parameter tape_use_count = 300 to 100?. advise me whether some other parameter causing the error.
I am running the online backup with the option : Whole database online + redo log backup in same run.
DB13 log file : i can see that, brbackup completed (datafiles), after starting arch log backup here i'm getting the error.
BR0018I Waiting for the next offline redo log file...
BR0056I End of database backup: bedfduej.ant 2010-05-12 16.25.46
BR0280I BRBACKUP time stamp: 2010-05-12 16.25.46
BR0052I BRBACKUP completed successfully
BR0280I BRBACKUP time stamp: 2010-05-12 16.25.46
BR0291I BRARCHIVE (action ID aedfduej) will be started with options '+bedfduej.ant,154422812672,VRDB03,35:24535 -jid ALLOG20100512153100 -d tape -c force -p initVRD.sap -cds'
BR0280I BRBACKUP time stamp: 2010-05-12 16.28.26
BR0261E BRBACKUP cancelled by signal 15
BR0056I End of database backup: bedfduej.ant 2010-05-12 16.28.26
BR0280I BRBACKUP time stamp: 2010-05-12 16.28.26
BR0054I BRBACKUP terminated with errors
Detailed error from arch log backup : --- arch log files also getting backup but finally i'm getting error so whole backup
ending with Return code: " 0005 Error during processing"
Arch log backup log :
BR0016I 8 offline redo log files processed, total size 75.882 MB
BR0202I Saving space_log
BR0203I to /dev/rmt/0mn ...
BR0202I Saving det_log
BR0203I to /dev/rmt/0mn ...
BR0202I Saving sum_log
BR0203I to /dev/rmt/0mn ...
BR0280I BRARCHIVE time stamp: 2010-05-12 16.27.48
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0351I Restoring /oracle/VRD/sapreorg/.tape.hdr0
BR0355I from /dev/rmt/0mn ...
BR0278E Command output of 'LANG=C cd /oracle/VRD/sapreorg && /usr/sap/VRD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rm
650 blocks
BR0280I BRARCHIVE time stamp: 2010-05-12 16.27.48
BR0279E Return code from 'LANG=C cd /oracle/VRD/sapreorg && /usr/sap/VRD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt
BR0359E Restore of /oracle/VRD/sapreorg/.tape.hdr0 from /dev/rmt/0mn failed due to previous errors
BR0218E Checking label on volume in device /dev/rmt/0mn failed
BR0280I BRARCHIVE time stamp: 2010-05-12 16.27.48
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0007I End of offline redo log processing: aedfduej.cds 2010-05-12 16.28.26
BR0280I BRARCHIVE time stamp: 2010-05-12 16.28.26
BR0005I BRARCHIVE terminated with errors -
GOOD DAY!!!!!!!!
Is there anyone who can help me to solve my problem with regards to db13 backup
this is the error message.....
Job started
Step001 started (program RSDBAJOB, variant & 000000000000022, user id
Execute logical command DB6_DBBACKUP on host
Parameters:SSD ONLINE TO /dev/rmt1 BUFFERS 0 BUFFERSIZE 0 PARALLELISM 0 INCLUDE 0 LOGS
ERRORMESSAGE:unable to open file:'/usr/sap/SSD/SYS/global/dscdb6.conf'
External program terminated with exit code 2
DB6_DBBACKUP returned error status E
Job finished
Kind Regards,
DD Howard.....Dear Barry,
How can my inits6d.sap be the same as inits6d.ora???
The first has backup related /SAP parameters,whereas the second is solely Oracle related parameters.I've tried recreating the .ora file from the spfile also.
Please help..
Have a great day:),
Thanks,
Saba. -
hi experts,
We are on win2003 and orale10g and we do online db13 backup alloline + redo log .now we have to restore this backup on test instance.can anybody guide me the exact steps involved and documentations if availabe.Are you trying to restore on same SID or different, if it is same SID then, please find the below steps:
Hope the below gives you a full idea
"Steps for Restore and Recovery of
SAP system using Brtools"
1 Check the sapmnt directory, SAP kernel and oracle executables
2 check the sap operating system users (i..e, ora<sid>, <sid>adm) with appropriate user IDs' and group membership. (Note: the Uids' of the SAP operating system users and GIDs' must be same as it was before disaster)
3 Check the Operating System groups (i.e., sapsys, dba, oper) with appropriate Group IDs'
4 Check for the Successful backup taken with brbackup and the tapes related to same
5 Check the init<sid>.sap, especially change the tape_address parameter,
6 check the sap directories used by brtools (/oracle/<SID>/sapbakcup, /oracle/<SID>/saparch, /oracle/<SID>/sapreorg, /oracle/<SID>/sapcheck), if necessary create it with ora<sid> as owner and dba as group
7 Connect the tape drive to the system and insert tapes in to it.
8 Check the Backup in the tape using command "brbackup -I show". This will show the backup date, tape label, etc
9 "Restore the backup logs as well as init<sid>.sap, init<sid>.ora saved while backup using backup ""brrestore -n all_log=<alternate location>""
(Note: this takes much time, since it reads the whole tape. So please be patience and donot cancel this step. Also we cannot restore the database without the detailed log)"
10 The above command will restore all the files like init<sid>.ora, init<sid>.sap, backup detail log, summary log.
11 Replace the existing files with the files restored from the alternate location to the original location
12 Check the mount points and permissions for sapdata<n> folders (i.e., owner - ora<sid>, group - dba, file permissions 755)
13 start the datafiles restoration using command - "brrestore -b <detail log name>.<ext> - m full"
14 Brrestore will create the sub directories as required and as in detail log specified
15 Brrestore will start restoring the datafiles as per detail logs
16 Once the datafiles restoration is completed, it restores Controlfile in to sapbackup folder and copies the controlfile as specified in the detail log
17 Check the control_files parameter in init<sid>.ora file and confirm whether the files are at the correct location. If the controlfiles are at different locations, check the path of all files and change the control_file parameter in init<sid>.ora
18 Mount the database, to do this execute sqlplus "/ as sysdba" and then in the sql prompt type sql script "startup mount"
19 This will mount the database if control files are in correct location as in init<sid>.ora and are not corrupt
20 Restore the archive logs from the archive logs backup taken with brarchive.
21 To Restore, insert the archive log tape in the tape drive
22 Ensure that the tape address parameter tape_address is correct in init<sid>.sap
23 To restore archive logs we have to restore summary as well as detail log of archive log backup
24 To restore the archive log backup log, execute the command - brrestore -n all_logs=<alternate location>. This will restore all logs saved in the backup like init<sid>.sap, init<sid>.ora, summary and detail log
25 Copy the summary and detail log from alternate locaiton to original location i.e., /oracle/<SID>/saparch
26 Execute the sql script recover database using backup controlfile until cancel; in the sql prompt. This command will show the archive log file that will be necessary for recovery of the database.
27 To restore the archive log files, check in detail log file the archive logs saved in the backup. To restore the logs backed in the backup execute, brrestore -a <archive log a>-<archive log b>. This command will restore the archive logs from archive log a to archive log b to default location /oracle/<SID>/oraarch
28 Start applying the archive logs using sql script - recover database using backup controlfile until cancel; This will give the archive log file, check whether we have all the logs along with the file specified
29 Restore the all the archive logs available in the backup. Follow steps 21 to 25
Note: if we had added any datafile to any tablespace. The archive log will be switched from online redo log to offline redo log file (if we use brtools to add or extend datafile). When we try to add this archive log file, then we get an error, ORA-01111: name for data file <id> is unknown - rename to correct file and the correct file name with location will be displayed. But if we have extended the datafile, then applying the archive log of that time will extend the file automatically
To solve this problem , check the alert log file, the below error will be displayed
ORA-01244: unnamed datafile(s) added to controlfile by media recovery
ORA-01110: data file <file id>: '/oracle/<SID>/sapdata<n>/<sid>_<no.,>/<sid>.data<no.,>'
Check the unnamed file in v$datafile table using query "select FILE#, NAME from V$datafile where FILE# = <id>;"
This will show the name of the file as in the controlfile. We have to rename the file and create the physical file; to do this execute "alter database create datafile '/oracle/<SID>/920_64/dbs/UNNAMED00<file id>' as '/oracle/<SID>/sapdata<n>/<sid>_<no.,>/<sid>.data<no.,>';"
Start Applying the archive logs using sql script - recover database using backup controlfile until cancel;
30 Open the database using sql command - "alter database open resetlogs;", this will open the database in read/write mode and reset the archive log number to 0, the archive log generated will be started with number - 1
31 Check the connectivity of the Database with sap using a tool given by SAP i.e., R3trans. Which checks the connectivity to the database. Start the listener - lsnrctl start and execute R3trans -d. The output of the r3trans -d should be 0, else analyze the error and go ahead.
32 If the R3trans tool return code is 0, then start sap.To start sap switch to user <sid>adm (use su - <sid>adm give the password if prompted) and execute startsap. This will start both database if not started and then sap
34 Brbackup doesnot take the backup of the tempfiles in any of the backup. So after opening the database we have to create the temporary datafiles. To add tempfiles execute the sql script : "alter tablespace PSAPTEMP add tempfile '/oracle/<SID>/sapdata<n>/temp_<no.,>/temp.data<no.,>' SIZE 6144M;". This will add a temp file of size 6GB
Hope this helps you
Regards,
Kishore
Edited by: Kishore Soma on Aug 20, 2008 3:02 PM -
Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end.
TM sees it and it is mounted but cannot go any further. HELP?!!!!
Thanks
-AHow should it be connected? It has a usb port and ethernet. The USB on the ExHD looks like the port on the back of my computer, so I would need one wth the same ends? Do they make those?
I can usually fix most my comp problems myself, but this new ExHD has stumped me.
Thanks for your help.
-A -
how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).
The troubleshooting C17 is the specific article.
http://pondini.org/TM/Troubleshooting.html
This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
So download the real utility. Run it instead of v6 toy version.
http://support.apple.com/kb/DL1482
Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them. -
ORA-19870: error while restoring backup piece -- file exists in ASM
[oracle@rs1pre92dvdbsa01 ~]$ rman target sys/c9nv9sd9t9f11e@mdm11 auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 29 10:41:38 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: MDM (DBID=1485385044)
connected to auxiliary database: MDM (not mounted)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 29-OCT-10
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=13 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 29-OCT-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-19505: failed to identify file "+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607"
ORA-17503: ksfdopn:2 Failed to open file +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-15012: ASM file '+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607' does not exist
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/29/2010 10:42:00
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
RMAN>
ASMCMD [+mdmdg2] > cd mdm1
ASMCMD [+mdmdg2/mdm1] > ls
CONTROLFILE/
FLASHBACK/
ONLINELOG/
arch/
autobackup/
ASMCMD [+mdmdg2/mdm1] > cd autobackup
ASMCMD [+mdmdg2/mdm1/autobackup] > ls
2010_10_29/
ASMCMD [+mdmdg2/mdm1/autobackup] > cd 2010_10_29
ASMCMD [+mdmdg2/mdm1/autobackup/2010_10_29] > ls
s_733654605.283.733654607
As seen in asmcmd "s_733654605.283.733654607" file exists in +mdmdg2/mdm1/autobackup/2010_10_29 then why it is complaning that it can't find the file.
and also How to open/view file in asmcmd[oracle@rs1pre91dvdbaa01 utl]$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Fri Oct 29 13:11:44 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORA-01078: failure in processing system parameters
ORA-29701: unable to connect to Cluster Synchronization Service
I have rebooted both the RAC servers and I can't start database?
I was under the impression that Database should be automatically started as part of Clusterware
Please help urgent. -
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category. -
When I try to backup I get the error message.The backup disk image"/Volumes/Data/iMac.sparsebundle" could not be accessed(error-1) Any Ideas? it was working fine and i can't think of any changes I made to the system to affect this?
Start with the best resource available..... Time Machine --- Troubleshooting from Pondini, the wizard of all things Time Machine.
" . . . sparse bundle could not be accessed (error -1)" -
Error trying to backup photoshop elements 4.
Error trying to backup photoshop elements 4. Getting windows error: unable to save all data for file b0000408.jpg data lost try to save this file elsewhere;
and getting photoshop error "error encountered while writing file" and a bunch of numbers.
I have backed up to this device without problems.Thank you for your reply.
I have tried the backup multiple times and it crashes in different places each time - it seems.
I did the select all and "ctrl W". This did nothing. Did you really mean "ctrl + W"? Remember I have version 4.0.
I was able to do a successful back up onto a drive that has none of my pictures on it. Could this be the problem? I have an external hard drive that I have been using for my backups which have been working just fine. I recently started storing my pictures in my catalog on this external hard drive. Since then, I have not been able to back up to that drive. Nor have I been able to back up to any other drive that has pictures on it. -
My Time Machine is not backing up and gives me this error report:
The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use
Time Machine could not complete backup
Can anyone help me?Look at the discussion on the following forum:
https://discussions.apple.com/thread/3882138?start=0&tstart=0
The responses given there may help. -
Error in taking backup of RBS enabled content database!
Hi All,
I have implemented RBS for SharePoint 2013 / SQL Server 2012. While I need to
take backup of RBS enable site collection and I received the following
errors
Site Collection Backup
Current Job Status No operation in progress. Previous Job
Status Failed
Completed 2/15/2015 3:55 AM Duration (hh:mm:ss) 0:00:02
Recovery Step To recover the data, use the PowerShell restore command
Restore-SPSite. For more details, type Restore-SPSite -? at the PowerShell command prompt.
Error Message There was a generic database error. For more information, see the included exception.
I could not find any relevant TechNet or blog post pertaining to this error. SharePoint 2013 gives general
backup and restore strategies.
Q: How could take a backup and restore for RBS enabled content database?
Please suggest how I could achieve this. Any help would be highly appreciated.
Thanks in advance.
SandyHi Sandy,
According to your description, my understanding is that you want to backup and restore RBS enabled content database in SharePoint.
If you use the local FILESTREAM provider with RBS, you can use built-in SharePoint tools to back up and restore. These operations back up and restore both the metadata and the BLOB store. If you use the remote RBS provider, you must carefully coordinate
the backup and restore processes.
It is very important to take note of the filestream provider name. Then you can detach database, and copy primary file, log file and BLOB storage folder to new server and attach.
It is also important to remember to enable FILESTREAM on all nodes of the cluster. Without it, SQL query to attach database doesn't work.
Here are some posts, please check if they are useful for you:
http://sharepoint.stackexchange.com/questions/104130/how-to-do-we-backup-restore-the-rbs-enabled-content-db-in-sharepoint-2010
https://technet.microsoft.com/en-us/library/ff628583.aspx
http://blogs.msdn.com/b/opal/archive/2010/03/24/faq-sharepoint-2010-remote-blob-storage-rbs.aspx
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Maybe you are looking for
-
Getting ora-00904 BLOB_CONTENT invalid identifier. Help please.
Hi everyone, I am trying to upload a .jpg file into a custom table with the follwong code: DECLARE v_id number; v_length number; v_name varchar2(4000); v_mime varchar2(4000); v_blob blob; begin If (:P_F01 is not null) then select ID,mime_type,blob_co
-
My computer is no longer recognized when I visit websites, even if I check the "remember my computer" box. Once I navigate away from the page and then go back, I have to re-sign in. It is really annoying with my banking site, because I have to answer
-
hi all, Can any body provide the code to upload purchase order data using bapis in lsmw.urgent pls... thanks. assad
-
Solaris 8 (Intel) Installation problems
I have not been successful to install Solaris 8 (Intel version).I am installing from the (Install CD) and I get to the Solaris Boot screen that says: Select one of the identified devices to boot the Solaris Kernel and choose F2 to continue. Solaris i
-
Are you sure you want to send form again
Are you sure you want to send form again- How can I get ride of this message?