Error in db13 SXPG_COMMAND_EXECUTE failed

Hi
I have ecc6 ehp4 with oracle on windows this is cluster environment, I have installed standalone gateway on node2 successfully as per note 657999 and its up & running
When I keep db and application on separate nodes I cannot schedule any job in db13 I am getting error as below
Job started
Step 001 started (program RSDBAJOB, variant &0000000000039, user ID TABRAYZ)
Execute logical command BRCONNECT On host SAPFNP
Parameters: -u / -jid CHECK20110727155211 -c -f check
Can't exec external program (No such file or directory)
WaitForSingleObject failedwith %d (No such deviceor address)
SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: unknown
Job cancelled after system exception ERROR_MESSAGE
Please help me guys.
Thanks
Abdul Tabrayz

Hi,
there are two things that you need to make sure:
1) Make sure your RFC for sxpg should run on gateway host of virtual db in SM59.
2) Please make sure that you should have set additional env variable as per SAP note 378648 for user <sid>adm.
Thanks
Sunny

Similar Messages

  • Regards the issue on the db13 error is like SXPG_COMMAND_EXECUTE failed

    dear all,
    we are using
    os: windows 2003
    databse :oracle  10.2.0.4
    sap version: ecc 6.0
    & on the production system is on the cluster environment
    the issue is when ever i am firing any thing from the db13 it is throwing an error like
    SXPG_COMMAND_EXECUTE failed for BRBACKUP - Reason: program_start_error: For More Information, See SYS
    Job started
    Step 001 started (program RSDBAJOB, variant &0000000000013, user ID BASIs)
    Execute logical command BRBACKUP On host xxx
    Parameters:-u / -jid TAPIN20100403132120 -i force -c force -n 1 -v SCRATCH
    SXPG_STEP_XPG_START: is_local_host: rc = 403
    SXPG_STEP_XPG_START: host = xxx
    SXPG_STEP_XPG_START: is_local_r3_host: rc = 802
    SXPG_STEP_XPG_START: RFC_TCPIP_CONNECTION_OPEN: rc = 1003
    SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.003
    SXPG_COMMAND_EXECUTE(LONG)
    <timestamp> = 20100403132151
    COMMANDNAME = BRBACKUP
    ADDITIONAL_PARAMETERS =
    -u / -jid TAPIN20100403132120 -i force -c force -n
    1 -v SCRATCH
    LONG_PARAMS
    OPERATINGSYSTEM = ANYOS
    TARGETSYSTEM = xxx
    DESTINATION
    SY-SUBRC = 1003
    SXPG_COMMAND_EXECUTE failed for BRBACKUP - Reason: program_start_error: For More Information, See SYS
    Job cancelled after system exception ERROR_MESSAGE
    it had became very critical
    go live is very near for us
    so, kindly help me soon......................
    thanks in advance
    praveen kumar

    Hi,
    You have to install a  standalone gateway
    follow Note 657999 - Installing a Standalone Gateway in an MSCS Environment
    -Joel

  • DB13 SXPG_COMMAND_EXECUTE failed for backup reason

    Dear Gurus,
    I am facing error during DB13 since passed few days during backup and update statistics .SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program_start_error: For More Information, See SYS
    cancelled after system exception ERROR_MESSAGE..
    Please do need full.
    Thanks,
    Regards,
    Snehal Patel

    Hi,
    Do you have Standalone gateway on your server ?
    You can try Go to the db13 -> goto -> backend configuration
    And change background or application server to the database server (where DB physically resides)
    If you Database is on another host then SAPXPG_DBDEST_<dbhost> or <virtual_dbhost> (a TCP/IP connection) will play an important role for executing SAPXPG command.
    1) Install a Gateway instance on the DB server
    2) Mention the Gateway hostname and service ( sapgwxx) in the RFC destination SAPXPG_DBDEST_<DBHOST> using SM59.
    Also check the permission of the SAPXPG file.
    SAP Note 446172 - SXPG_COMMAND_EXECUTE (program_start_error) in DB13 - Point 8

  • DB13 job failed due to SXPG_COMMAND_EXECUTE error

    Hi,
    I received an error when I try run the BRCONNECT Database Action Calendar (tx. DB13), either it's a Database check, statistics updates, etc. The error messages are as follows:
    Job started
    Step 001 started (program RSDBAJOB, variant &0000000000166, user ID SETIR0)
    No application server found on database host - rsh/Gateway will be used
    Execute logical command BRCONNECT On host tdcwsxd1
    Parameters: -u / -c -f check
    SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program_start_error: For More Information, See SYS
    Job cancelled after system exception ERROR_MESSAGE
    FYI, we're using DB instance (DB) and Central Instance (CI) on each separate box in the unix environments. SAP Basis rel. 620 with SP level SAPKB62053.
    If I execute the command directly in DB instance, it works fine but not from SAP trx DB13.
    Command: brconnect -u / -c -f check.
    Thanks and best regards,
    Mark

    Hi Mark,
    Sorry I see you are running on Unix, I am only familiar with Windows environment, but however on Windows I would do the following:
    1) Install a so called Standalone Gateway on the DB-host.
    2) copy the sapxpg executable to the directory where the gateway is installed.
    2) Change the SAPXPG_DBDEST... RFC connection to point to, or use this gateway (gateway options).
    That's all....
    (How to Install a standalone gateway or Gateway instance is normally described in the SAP installation guide).
    But as I sad, I am not sure if this is possible under Unix also, and the way to go...
    Regards
    Rolf

  • SXPG_COMMAND_EXECUTE failed when executing cleanuplogs in TR DB13

    Hi,
    I am getting SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: x_error when executing cleanuplogs program in DB13. I have the correct DBHOSTNAME configured in profiles, my SAPXPG rfc  is pointing correctly to the database. Also I have the required authorizations to execute SAPXPG program.Could you pls let me know what is the cause of this error and steps to resolve it.
    Thanks,
    Clarence

    Hi Sharath
          Have you solved your problem? i have the same situation with you,  i am very appreciate it if you can reply me
    BS
    Jon

  • SXPG_COMMAND_EXECUTE failed for BRTOOLS

    Hi experts,
    I have my SAP ECC in a distributed system (CI and DB nodes are different) on Oracle 11G/ Solaris.
    When I try to execute any action in db13, appear the following error:
    SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: program_start_error: For More Information, See SYS
    I follow the SAP Note:  1974030 - How to configure DB13 to work with a standalone Oracle database in Unix/Linux
    but I continue with the error
    The RFC SAPXPG_DBDEST_HOSTDB works fine but I check in the trace of the proccess is:
    LOCATION    SAP-Gateway on host adonis.blumaq.local / sapgw00
    ERROR       timeout during allocate
    TIME        Tue Sep  9 12:47:24 2014
    RELEASE     721
    COMPONENT   SAP-Gateway
    VERSION     2
    RC          242
    MODULE      gwr3cpic.c
    LINE        2164
    DETAIL      no connect of TP sapxpg from host adonisdb after 20 sec
    COUNTER     6595
    Any idea?
    Thanks in advance,
    Regards,

    Hello Victor,
    and how the parameter gw/remsh is set, could you please check also this section in the note "10403 - Starting external programs":
    " c) If the remote shell in your computer is not called remsh
          (if you
    use a Unix 5.4 system, for example),
          you must set the gateway parameter
    gw/remsh to the correct name
          (which is normally "rsh" in such
    cases).  You may have to use the
          complete path name.  To check whether
    the remote shell is found,
          use the Unix command "which remsh" or "which
    rsh" under the
          gateway identifier."
    Regards,
    Alwina

  • SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: program_start_error:

    Hi,
    Our Production server is in High Availability on Unix ( DB node active & CI Node active).
    When I am executing the initialize tape or triggering the backup from DB13 in our production we are getting the below error.
    SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: program_start_error:
    Even in DB12 when I click on the detailed log of any backup log, it is giving the same error.
    In System log we got the below error.
    Error 1003 when executing external command brtools on
    (in=R,out=M,err=M,trc=0,trm=C. strtstat=,xpgid=0,convid=. msg:)
    Error 1003 when executing external command brtools on
    (in=R,out=M,err=M,trc=0,trm=C. strtstat=,xpgid=0,convid=. msg:)
    RFC SAPXPG_DBDEST_<HOSTNAME>  connection test giving the below error
    Logon Connection Error
    Error Details Error when opening an RFC connection
    Error Details ERROR: timeout during allocate
    Error Details LOCATION: SAP-Gateway on host ProdApp / sapgw00
    Error Details DETAIL: no connect of TP sapxpg from host PROD-DB-SRV
    after 20 sec
    Error Details COMPONENT: SAP-Gateway
    Error Details COUNTER: 869
    Error Details MODULE: gwr3cpic.c
    Error Details LINE: 2007
    Error Details RETURN CODE: 242
    Error Details SUBRC: 0
    Error Details RELEASE: 700
    Error Details TIME: Tue Mar 30 09:07:51 2010
    Error Details VERSION: 2
    I have created .rhosts and .rshosts files in both DB & CI nodes under path /home/trpadm as below
    CI Node
    ProdApp:trpadm 27> cat .rhosts
    PROD-DB-SRV
    PROD-APP-SRV
    ProdApp:trpadm 28> cat .rshosts
    PROD-DB-SRV trpadm
    PROD-APP-SRV trpadm
    trpadm
    DB Node
    ProdDB:trpadm 2> cat .rhosts
    PROD-DB-SRV
    PROD-APP-SRV
    ProdDB:trpadm 3> cat .rshosts
    PROD-DB-SRV trpadm
    PROD-APP-SRV trpadm
    trpadm
    But below command is giving error
    ProdApp:trpadm 24> rsh PROD-DB-SRV -l trpadm sapxpg
    rshd: 0826-813 Permission is denied.
    rsh is happening in both the nodes.
    In CI node when iam doing rsh to DB node it is connecting. Pleas find the below logs
    ProdApp:trpadm 17> rsh PROD-DB-SRV
    trpadm's Password:
    Welcome to AIX Version
    6.1! *
    Please see the README file in /usr/lpp/bos for information pertinent
    to *
    this release of the AIX Operating
    System. *
    Last login: Wed Mar 31 11:36:53 IST 2010 on /dev/pts/1 from
    Prod_App_boot_1
    ProdDB:trpadm 1>
    In DB node when iam doing rsh to CI node it is connecting. Pleas find the below logs
    ProdDB:trpadm 1> rsh PROD-APP-SRV
    trpadm's Password:
    Welcome to AIX Version
    6.1! *
    Please see the README file in /usr/lpp/bos for information pertinent
    to *
    this release of the AIX Operating
    System. *
    Last unsuccessful login: Tue Mar 23 16:05:26 IST 2010 on ftp
    from ::ffff:10.0.1.39
    Last login: Wed Mar 31 11:36:30 IST 2010 on /dev/pts/1 from
    Prod_DB_boot_1
    ProdApp:trpadm 1>
    the below entries are already maintained in /etc/services file on both the nodes.
    sapgw30 3330/tcp
    sapdp30 3230/tcp       
    Please look into this and suggest us.

    Hi,
    I have cross checked every thing, it is ok.
    Praveen,
    As per your suggest, i have changed the background server in DB13. It didnot help us.
    Problem is RFC are giving errors.
    Logon     Connection Error
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: timeout during allocate
    Error Details     LOCATION: SAP-Gateway on host <host> / sapgw00
    Error Details     DETAIL: no connect of TP sapxpg from host <host> after 20 sec
    Error Details     COMPONENT: SAP-Gateway
    Error Details     COUNTER: 4853
    Error Details     MODULE: gwr3cpic.c
    Error Details     LINE: 2007
    Error Details     RETURN CODE: 242
    Error Details     SUBRC: 0
    Error Details     RELEASE: 700
    Error Details     TIME: Mon Apr  5 09:18:49 2010
    Error Details     VERSION: 2
    When i am doing rsh from one node to another node it is asking for password, but it should not ask.
    and also the below error for sapxpg
    rsh <hostname> -l <sid>adm sapxpg
    rshd: 0826-813 Permission is denied.
    i have created .rhosts in both the nodes and maintained the values for hostname with <sid>adm user correctly.
    Please look into this and suggest.
    Regards,
    Raj

  • SXPG_COMMAND_EXECUTE failed for BRBACKUP

    Dear All,
    OS : AIX,  DB :Oracle , SAP ECC6.0
    i got an error and  online backup has  scheduled in DB13 ( Production Server)
    when its  reach the backup time its showins error
    Status : not Available
    JOB LOG:
    30.11.2009     17:26:56     Job started
    30.11.2009     17:26:56     Step 001 started (program RSDBAJOB, variant &0000000000672, user ID BASIS)
    30.11.2009     17:26:56     No application server found on database host - rsh/gateway will be used
    30.11.2009     17:26:56     Execute logical command BRBACKUP On host PRODORADB
    30.11.2009     17:26:56     Parameters:-u / -jid ALLOG20091130172655 -c force -t online -m all -p initIRPoffsite.sap -a -c force -p initIRP
    30.11.2009     17:26:56     offsite.sap -cds
    30.11.2009     17:27:28     SXPG_STEP_XPG_START: is_local_host: rc = 403
    30.11.2009     17:27:28     SXPG_STEP_XPG_START: host = PRODORADB
    30.11.2009     17:27:28     SXPG_STEP_XPG_START: is_local_r3_host: rc = 802
    30.11.2009     17:27:28     SXPG_STEP_XPG_START: RFC_TCPIP_CONNECTION_OPEN: rc = 1003
    30.11.2009     17:27:28     SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.003
    30.11.2009     17:27:28     SXPG_COMMAND_EXECUTE(LONG)
    30.11.2009     17:27:28     <timestamp> = 20091130172728
    30.11.2009     17:27:28     COMMANDNAME = BRBACKUP
    30.11.2009     17:27:28     ADDITIONAL_PARAMETERS =
    30.11.2009     17:27:28     -u / -jid ALLOG20091130172655 -c force -t online -
    30.11.2009     17:27:28     m all -p initIRPoffsite.sap -a -c force -p initIRP
    30.11.2009     17:27:28     offsite.sap -cds
    30.11.2009     17:27:28     LONG_PARAMS
    30.11.2009     17:27:28     OPERATINGSYSTEM = ANYOS
    30.11.2009     17:27:28     TARGETSYSTEM = PRODORADB
    30.11.2009     17:27:28     DESTINATION
    30.11.2009     17:27:28     SY-SUBRC = 1003
    30.11.2009     17:27:28     SXPG_COMMAND_EXECUTE failed for BRBACKUP - Reason: program_start_error: For More Information, See SYS
    30.11.2009     17:27:28     Job cancelled after system exception ERROR_MESSAGE
    pls give suggestion to solve this issue
    regards
    satheesh

    Hi
    In Windows we can find Host & services from C:\WINDOWS\system32\drivers\etc
    we are using AIX for all servers
    below detail for reference
    ===================================================
    ROOT@PRDCIXI:/#ls
    .TTauthority         bosinst.data         perfdata
    .Xauthority          cdrom                proc
    .dt                  clverify_daemon.log  sapcd
    .dtprofile           configassist.log     sapcdd
    .java                dead.letter          sapmnt
    .mh_profile          dev                  sbin
    .profile             esa                  sdtstart.err
    .rhosts              etc                  smit.log
    .rhosts.previous     home                 smit.script
    .sdtgui              image.data           smit.transaction
    .sh_history          lib                  ss.txt
    .vi_history          lost+found           tftpboot
    .wmrc                lpp                  tk
    CSD                  mksysb               tmp
    IRPEXE               mnt                  u
    Mail                 mount.a1253462       unix
    TT_DB                opt                  usr
    audit                oracle               var
    backup               pay                  websm.script
    bin                  pay1
    ROOT@PRDCIXI:/#cat .rhosts
    PRODORADB_boot1
    PRODORADB_boot2
    PRODORADB_svc
    PRODORADB_ps
    PRDCIXI_boot1
    PRDCIXI_boot2
    PRDCIXI_svc
    PRDCIXI_ps
    ===================================================
    This is APP2 Instanece
    ROOT@PRDAPP2:/#ls
    .TTauthority      TT_DB             lpp               smit.log
    .Xauthority       audit             mksysb            smit.script
    .dt               bin               mnt               smit.transaction
    .dtprofile        bosinst.data      nmon              tftpboot
    .java             cdrom             opt               tk
    .profile          configassist.log  oracle            tmp
    .rhosts           dev               pay               u
    .rhosts.previous  esa               proc              unix
    .sdtgui           etc               sapcd             usr
    .sh_history       home              sapcdd            var
    .ssh              image.data        sapmnt            websm.script
    .vi_history       lib               sbin
    .wmrc             lost+found        sdtstart.err
    ROOT@PRDAPP2:/#cat .rhosts
    SAP-DEV-QAS root
    ROOT@PRDAPP2:/#cat .rhosts.previous
    SAP-DEV-QAS root
    ROOT@PRDAPP2:/#
    ========================================
    This is APP1 Instanece
    ROOT@PRDAPP1:/#ls
    .TTauthority      TT_DB             lpp               smit.log
    .Xauthority       audit             mksysb            smit.script
    .dt               bin               mnt               smit.transaction
    .dtprofile        bosinst.data      nmon              tftpboot
    .java             cdrom             opt               tk
    .profile          configassist.log  oracle            tmp
    .rhosts           dev               pay               u
    .rhosts.previous  esa               proc              unix
    .sdtgui           etc               sapcd             usr
    .sh_history       home              sapcdd            var
    .ssh              image.data        sapmnt            websm.script
    .vi_history       lib               sbin
    .wmrc             lost+found        sdtstart.err
    ROOT@PRDAPP1:/#cat .rhosts
    SAP-DEV-QAS root
    ROOT@PRDAPP1:/#
    You have mail in /usr/spool/mail/root
    ROOT@PRDAPP1:/#
    ROOT@PRDAPP1:/#cat .rhosts
    SAP-DEV-QAS root
    ROOT@PRDAPP1:/#cat .rhosts.previous
    SAP-DEV-QAS root
    ROOT@PRDAPP1:/#
    ============================================================
    kindly advise me i didnt get any hint from host file

  • SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason

    Hi,
    My CI + DB in Suse Linux and SAP Karnal level is 159
    My Dialog instace in on windows server and Karnal level is 159.
    When i trying to open the detail log of db13 from Dialog instace it was not opened and shows the error as below ( but it showing from CI server ).
    SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: x_error
    Message no. Q2233
    Diagnosis
    This message includes variables. No additional information can be specified.
    Please suggest the solution.
    Regards,
    Ravi Ghangurde

    Most likely you are trying to run an external program in windows that is designed for linux.... to get more info check dev_cp and dev_xpg and post the errors here.
    Regards
    Juan

  • SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program

    Hello,
    We have installed MSCS cluster on OFS for SAP ERP EhP4 SR1.
    This installation is successful and both the nodes are running.
    However, as soon as i execute any of the DB13 jobs, I get the mentioned error.
    SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program_start_error.
    This is stopping us from releasing the system to the end users, which effectively delays our GO-Live till the problem is resolved. 
    Please advise what all steps or notes are to be followed to make DB13 working in MSCS clusrer.
    Regards
    Ankita

    Hi,
    Briefly describe your system architecture ?
    Have you followed/implemented  SAP Notes [446172|https://service.sap.com/sap/support/notes/446172]  and [657999|https://service.sap.com/sap/support/notes/657999] carefully, by comparing your existing settings?
    Have you analyzed the log entries  in SM21, also at Operating system level Logs ?
    If you Database is on another host then SAPXPG_DBDEST_<dbhost> or <virtual_dbhost> (a TCP/IP connection) will play an important role for executing SAPXPG command. Test SAPXPG_DBDEST_<dbhost> or <virtual_dbhost> RFC connection with its Trace logs.
    Regards,
    Bhavik G. Shroff

  • DB13 Jobs Failing - How do I trouble shoot?

    Here is an example of a failed job. Any advice on how to get it to work in DB13?
    DB13 - Check Databasee
    Status - Scheduling Failed.
    2008-08-28 01:00:59 Step 001 started (program RSDBAJOB, variant &0000000000087, user ID WFEE)
    2008-08-28 01:00:59 Action deleted in SDBAP at 20080828005959
    2008-08-28 01:00:59 Job cancelled after system exception ERROR_MESSAGE
    2008-08-28 01:00:59 Job started
    2008-08-28 01:00:59 Step 001 started (program RSDBAJOB, variant &0000000000121, user ID DDIC)
    2008-08-28 01:00:59 Execute logical command BRCONNECT On host spr3db1
    2008-08-28 01:00:59 Parameters: -u / -jid CHECK20080828010000 -c -f check
    2008-08-28 01:01:20 SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: x_error
    2008-08-28 01:01:20 Job cancelled after system exception ERROR_MESSAGE

    Please check if the brconnect program is at the given place.
    Also have a look at note 1229617 - Error handling for external commands
    Markus

  • SXPG_COMMAND_EXECUTE failed for BRTOOLS -Reason: no_permission: Authorizati

    HI Experts.
    My BI consultants are not able to pull the data while execute the Tcode: LISTCUBE.
    I could not see any logs any short dumps but in RZ20 i found below error message.ora-00600
    SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: no_permission: Authorization object S_LOG_COM miss.
    Even we checked with our security team even after they assigned full authorization they are getting the same problem.
    Could some one provide the solution for this.
    Regards
    JAN

    Seems to be confusing..
    Any error while executing LISTCUBE tcode ?
    If suspect authorization issue, did BI team run SU53 just after LISTCUBE ?
    For S_LOG_COM, did you see this note once ?
    Note 150315 - BW-Authorizations for Remote-User in BW and OLTP
    However, following error seems to be confusing containing the term BRTOOLS, not sure what BRTOOLS doing here
    SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: no_permission: Authorization object S_LOG_COM miss
    SXPG error comes for external commands, once check the Notes using this search term. For eg
    Note 854060 - Authorizations for external commands
    Note 1336776 - External commands: Security for calling side

  • SXPG_COMMAND_EXECUTE failed for DB6_BACKUP Reason:Command_not_found

    Hi,
    When i have configured to take backup using DB13 in production b/w SERVER (SAP ECC 6.0) it is saying the following:
    14.01.2008     11:39:41     Job started
    14.01.2008     11:39:41     Step 001 started (program RSDBAJOB, variant &0000000000002, user ID BASIS)
    14.01.2008     11:39:42     Execute logical command DB6_BACKUP On host prprd1
    14.01.2008     11:39:42     Parameters:PBW OFFLINE TO /dev/rmt/0mn BUFFERS 0 BUFFERSIZE 0 PARALLELISM 0
    14.01.2008     11:39:43     SXPG_COMMAND_EXECUTE failed for DB6_BACKUP - Reason: command_not_found
    14.01.2008     11:39:43     Job cancelled after system exception ERROR_MESSAGE
    Actually when it is doing it should execute the following DB6_DBBACKUP logical command but it is saying it used DB6_BACKUP logical command which is not there.
    In DB13, when i see the previous backups which were sucessfully completed r not seen, but in the job log SM37 it is showing.
    Auditing was done by SAP and kernel is updated for production system. Is it creating any problem?
    Expecting a solution.
    regards
    padma

    Hi Ralf,
    Thanks for the reply.
    I could also found that answer on my own.
    regards
    padma

  • Db13 jobs fails

    Hello,
    we have distributed production server.we shceduled db13 jobs like checkdb and update statistics these job s are getting failure
    sapxpg rfc connection also failed.
    Job started
    Step 001 started (program RSDBAJOB, variant &0000000000009, user ID HCCBASIS)
    No application server found on database host - rsh/gateway will be used
    Execute logical command BRCONNECT On host hrel-prdb
    Parameters: -u / -jid CHECK20080825115758 -c -f check
    SXPG_COMMAND_EXECUTE(LONG)
    COMMANDNAME = BRCONNECT
    OPERATINGSYSTEM = ANYOS
    TARGETSYSTEM = hrel-prdb
    DESTINATION =
    SXPG_STEP_XPG_START: is_local_host: rc = 403
    SXPG_STEP_XPG_START: host = hrel-prdb
    SXPG_STEP_XPG_START: is_local_r3_host: rc = 802
    SXPG_STEP_XPG_START: RFC_TCPIP_CONNECTION_OPEN returned rc_cannot_get_rfc_dests
    SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 901
    SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: x_error
    Job cancelled after system exception ERROR_MESSAGE
    thanks in advance,
    basis team.

    Hello All,
    Please restart your server and reschedule the job in DB13 .
    We also face this problem in past
    Thanks & Regards
    Shishir

  • I just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: the application has failed to start because MS

    i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?

    I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed.  It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4).  Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html   The previous version works beautifully.

Maybe you are looking for