Error in Decimal places.

Hi Experts,
my client is using ECC 5.0 now we have the problem with decimal places when the customer posts the transaction with USD,the problem is rising. For Ex: If the PO is raised in USD 500,but the system is updating only as 50 USD.
Your valuable advices will be appreciated.
Thanks & Regards,
Vasu.

Hi,
Please check the user specification maintenance in SU01 t.code and select the Tab of Default and change the Decimal Notation.

Similar Messages

Error in decimal places while using the currency ends with 4 e.g. CNY4,USD4

Dear all,
I need ye help, the problem that a report having a field KONP-KBETR .......the report moves the decimal 2 places to the right. And so, 412.3846 becomes 41238.46. ..occurs only when the currency ends in 4 (CNY4, USD4, EUR4..)
Can you please guide.
Thanks in advance .
Rgds,
Pem

Hi,
I think you are misinterpretting the things.
1.CNY4, USD4, EUR4 are Currency keys and they does not end with 4 they are CNY, USD, EUR.
2.and KBETR is CURR(11,2) so it will always display TWO places of decimals.
Regards,
Neha

Decimal Places are not permitted

Hello,
The Vendor Invoice amount in Rs 25920.72 and the currency is INR, When i am entering in T.code FB60 i am getting an error "Decimal Places not permiited". i made changes in T.code SU01 (Maintained User) and T.code OY01 (Defining Countries in SAP Systems) respectively but still getting the same error as "Decimal Places not permitted". After that i checked in T.code OY04 (Set Decimal Places for Currencies) and there Currency INR is reflected and "no decimal places" field is assigned to it. What should be done. Please Help!
Regards
Ashwin

Yes. you are right, once done the transaction for INR
Your are not suppose the change decimal settings.
So it will effect old transaction.
Please check the note mentioned. below. Hope it helps.
Note 172410 - Percentages of completion with decimal places
regards
vamsi

Routing - decimal places for unit of measure conversion quantity

Hello all,
in the change routing screen in SAP (CA02), when going to a operation detail screen, a unit of measure conversation value can be defined. A value for header and operation can be made.
Currently we cannot set any decimal values for operations, I get the error message: "decimal places are not permitted."
Where in customizing can I change that?
Thanks
Anne

Hello,
thanks for the answers.
The UoM is LB.
I've already checked CUNI, but I can not find LB..?
Also I've noticed other places in SAP, for example the base quantity of some operations in the routing have a numbers with 3 decimal places and the same UoM LB, so this looks like the UoM is setup fine, maybe there are just problems with this special screen?
Thanks
Anne

Decimal place is not permitted in activity level

Hi Experts,
We have built a project structure with 100+wbs and 600 activities as per business requirement but we need to introduce Decimal value in POC Weight age in activity level, system is throwing error as Decimal place is not permitted, and we need system should allow to enter Decimal value while confirming also.
These are my observations:
The domain of the field EVGEW ( POC Weight) decimal is zero
Note 172410 - Percentages of completion with decimal places (which is old notes)
Please provide inputs to come out from this issue.

Hi Guru,
As far as i feel, there should be some logical reason as to why the system is not allowing decimal places for the POC weightage. If nothing helps, i would suggest you to raise this with SAP and seek their guidance.
Regards,
Gokul

Error while updating decimal places in general settings

Hii All
         I have got an error while updating Decimal places in General Settings
Cannot update while another user is connected to the company i have checked, there is no other user logged in, i could add other settings but the problem is only with Decimal Places
Note : there are no postings yet, a fresh database for a new client
         what could be the possible reason
                                                             thanks
                                                                     RIYAZ

Hiii All
      As a forum rule, i have initially gone through with the existing threads and then i was force to post a thread,
          would be helpfull if there is any other way..
                                            Thanks
                                                     RIYAZ

Error message when updating decimal places in general settings

Hello together,
I got a big problem with the settings of decimal places.
I know that I am only be able to incerase these but it's a virgin database for a customer with no data imported.
Everytime I want to increase the prices decimal places I get the following error message:
"cannot update while another user is connected to the company"
But I checked all sessions connected to this database. I am the only person that is logged in.
I closed the db more that one time but it doesn't work.
Can you help me please?

Hello Meike,
I have had this problem a while ago and it was caused by the RPD-connection i had made with the customer server.
I had to change the values directly on the client machine.
Hope this also your solution.
Kind regards.

Error stating "too many decimal places (max allowed 0) while getting input

Hi experts
   In one of my reports the input is accepted for the user for a field . The field was initially declared as AZINSSATZ ( Data Type DEC    Length     10         Decimal Places   7 ) . It did not accept the values like 12.5 .Inorder to give 12 5 we need to give as 12.0000005 .Later i changed it ot menge_d , dmbtr and various other data types but shows the above error.
please advise on how to correct it

Hi ,
Sorry for the delay .
    x_fieldcat-scrtext_m = 'Interest Rate'.
    x_fieldcat-fieldname = 'INTEREST'.
    x_fieldcat-tabname = 'IT_BSID1'.
    x_fieldcat-col_pos = l_pos.
    x_fieldcat-outputlen = '13'.
    x_fieldcat-edit = 'X'.
    APPEND x_fieldcat TO it_fieldcat.
    CLEAR x_fieldcat.
    l_pos = l_pos + 1.
the strcture if it_bsid1 is
DATA : BEGIN OF IT_BSID1 OCCURS 0,
INCLUDE STRUCTURE ZFTHUNDI_NO.
BUKRS TYPE     BUKRS,
HUNDI_NO TYPE          ZHUNDI_NO,
VBELN      TYPE      VBELN_VF,
KDMAT      TYPE      KDMAT,
KUNNR      TYPE     KUNNR,
NAME1      TYPE      NAME1,
ORT01      TYPE      ORT01,
BUDAT      TYPE      BUDAT,
TYPE      TYPE      ZTYPE,
GRN_NO TYPE     MBLNR,
GRN_DATE TYPE          BUDAT,
DUEDATE      TYPE     ZDUEDATE,
QTY      TYPE     FKIMG,
REC_QTY TYPE     ZREC_QTY,
ACC_QTY TYPE     ZACC_QTY,
REJ_QTY TYPE     ZREJ_QTY,
BAL_QTY TYPE     FKIMG,
PRCTR     TYPE PRCTR,
DMBTR     TYPE DMBTR,
WRBTR     TYPE WRBTR,
TOTAL     TYPE WRBTR,
FAHA_NO1 TYPE     ZFAHA,
FAHA_DATE TYPE     ZFAHA_DATE,
HSDATE TYPE     ZHSDATE,
HRDATE TYPE     ZHRDATE,
DISDATE TYPE     ZDISDATE,
HBKID     TYPE HBKID,
INTEREST TYPE MENGE_D, ( i ve tried it with diff data types like dmbtr etc)
W_FLAG TYPE C,
W_FLA TYPE C ,
LIGHT TYPE C,
END OF IT_BSID1.

Error: decimal places not allowed

Hi,
I am entering a PO in currency JPY(Japanese Yen).However when I try to enter a PO with net price for one of the items as say 2.71,it gives error decimal places not allowed.
I have maintained currency rate as 100 local currency=3.1 Yen
It only gives problem while using this currency.
What is the way out ?
Regards,
manOO

Hi,
Check the config of the currency code (OY04), it is probably set to not allow decimal places.
If this is the case, don't change it, simply enter a price of 271 with a price unit of 100, in the PO. This will give you a price of 2.71 for one
Steve B

Getting an error in CIF Inbound queue:"Only 0 decimal places are permitted for unit of measure PC"

Hi,
I am getting an error in CIF Inbound queue (function: CIF_ORDER_INBOUND_30A). The error text says "Only 0 decimal places are permitted for unit of measure PC".
Can anyone point out the solution to resolve this error? It would be a big help for me as I am new to APO and so getting difficult to find a clue for it.
Thanks.
Regards
Mansi

Hi Mansi,
Please check the cif queue you will get the order number from that order number you can find out material code. Then check the material master unit of measure in MM03 you have used some alternative unit of measure and system is unable to convert order to alternative unit of measure because of decimal setting. If you go to CUNI and check the unit if measure PC it is not permitted for decimal places. If you need decimal than change the UoMof Material and use diff UoM or allow the decimal for PC which is not good practice.
Regards,
R.Brahmankar

"value cannot have more than 0 decimal places" error

CRM gurus,
Whenever I try to create a Counter, I receive the following warning which doesn't allow me to do anything further..
"value cannot have more than 0 decimal places"
I first received this when I tried to assign a counter to a product in an Installed Base. So when I tried creating a counter here, I got the above message. I then tried to assign a counter to the product in the product master data, and I still received the same error message. I then tried creating a counter from the "Maintain Counter" screen (Transaction Code: crm_mpk_admin), and still received the same error message.
In this effort I created my own custom Counter Category, and Attributes. Nothing helped.
Could someone throw some light on this concept and tell me where am I going wrong.
Thanks and regards,
-Pras

Hi
I think its a program error, you need to Implement the source code corrections.
Please refer SAP Note : 855670
Regards,
Johnny.
Reward if it helps.

Error at Quantity Decimal Places Updation

Hello Guyz
The scenario is when i am trying to update the decimal place of Quantity then at the time of update its showing the error i.e client is already Connected to Company and I have checked that no client is connected with the Company.
Thanks
Ankit

Hi,
Please check whether there is any instance or SQL process which is in sleeping mode. Even sleeping process can block the transaction of updating the decimal settings.
Also, please be aware that once the decimals are increased, it is irreversible. You cannot decrease the decimal places afterwards.
Kind Regards,
Jitin
SAP Business One Forum Team

CUNI Decimal place - error message

Dear Friends,
Is there any way we can display an error message if a user enters more than the allowed decimal place per unit.
In CUNI we can control the display of decimals or the rounding of the decimals. Eventhough this is done the system still allows decimal places more than what is stipulated for that unit in CUNI.
But, the requirement is that the system should not allow the user to enter decimal places more than the allowed decimal place setings in CUNI. The system should display an error message.
Please let me know if this can be done per unit.

Hi Lakshmipathi,
Please find my explanation below:
Scenario - 1
-CUNI - BTL (Bottel) - No.Decimal place display (T006-DECAN) = "0"
-Material - ABC - Base UoM = BTL and Sales Unit = BTL.
-When a user creates a sales order for the third party process the system allows decimal places in quantity field (e.g.) = 1.50 BTL
->The system should not allow the above process.
Scenario - 2
-CUNI - SH (Sheets) - No.Decimal place display (T006-DECAN) = "1"
-Material - XYZ - Base UoM = SH and Sales Unit = SH
-When a user creates a sales order for the third party process the system allows decimal places in quantity field (e.g.) = 1.5 SH
-> The system should not restrict the above process.
Is there any way this can be achieved per unit of measure? If we restrict the decimal notation per user, there would be no flexiablity in the useage of units per user.

Trying to Update Decimal Places - Get Error

Administration->System Initialization->General Settings->Display
I change Amounts to 3 and Quantities to 6
Click Ok
Receive dialog - changes are irreversible
Click Yes
then receive error
Cannot update while another user is connected to the company
I am the only one logged in
2007aPL38

Hi Stephanie,
To continue to update the decimal places, please try the following:
1. Restart the SQL Server as there may be some connections that are
not cleared in the server.
2. Stop any add-on running in the system.
Note that in 2007A version, the decimal places can only be increased.
Once set, they cannot be decreased anymore. So work with decimal in a consistent way.
If the issue remains unresolved after trying the 2 solutions, Please
log a message for SAP Support
Regards
Vikas
Edited by: Vikas Rastogi on Sep 18, 2008 9:44 PM

Calculated Key Figures Decimal Place Error

Hi Experts,
Wonder if there is anybody to help me out to explain why I am having a problem on the calculated key figures decimal places when if I report on the components of the calculated key figure (restricted key figure) are working correctly?
The calculated key figure is a boolean formula made up of 2 restricted key figures. The 2 restricted key figure are having 2 decimal place (one is 0.36 another is 0.00). In the current condition, the 2 restricted key figure just sums up - 0.36 + 0.00 = 0.36. However the calculated key figure displayed as 0.359999 (6 decimal places) as the result.
I am using BEx Analyzer Excel.

Hi Fang,
right mouse click on your KF and select properties. Then define the number of decimal places you want.
Ciao.
Riccardo.

Error in Decimal places.

Similar Messages

Maybe you are looking for