Error in defining new calendar in r12

Hello there
i am trying to define a new calendar, but when i try to save it, i am getting the following error:
APP-FND-01206: THIS RECORD ALREADY EXISTS. YOU ENTERED A DUPLICATE VALUE OR SEQUENCE OF VALUES THAT MUST BE UNIQUE FOR EVERY RECORD.
please sort my problem
regards

hi there, i am new to this community. i could not understand refer note 400405.1.
where can i i find this??

Similar Messages

Error while defining new Plant

Hi all,
when i am defining plant in logistics general i am getting following error.
While selecting the region i am getting same dropdown list which is avilable in Country Field.
Please help, thanks in advance.
Regards
Ramya

HI
You have to assign the Tax Calculation Procedure to the Country India.
Follow the path and assign TAXINN
IMG>Financial Accounting>Financial Accounting Global Settings>Tax on Sales/Purchases>Basic Settings-->Assign Country to Calculation Procedure
Assign the Procedure to IN India.
Prior to this check whether the tax procedure is available or not
in IMG>Financial Accounting>Financial Accounting Global Settings>Tax on Sales/Purchases>Basic Settings-->Check Calculation Procedure
regards
Prashanth

Error messages after new MobileMe Calendar upgrade. Solved?

Quick rundown of what I've been through and how I have solved my problem.
I have a MacBook running 10.5.6 and I also have Bento 3. Recently Bento (Filemaker) told me that I would have to complete a few steps before upgrading to the new MobileMe calendar. So I followed the steps exactly. (URL: http://help.filemaker.com/app/answers/detail/a_id/7846/~/setting-up-bento-for-th e-new-mobileme-calendar)
After completing the steps. I proceeded to upgrade to the new calendar. Upgraded in less than a minute and then after opening up iCal on my mac & importing my calendars, thats when things started to go wrong. I kept getting error messages on almost every even I have ever created. I could barely even quit iCal due to all the error messages. Also, many of my events werent there after importing and the progress wheel kept spinning. Complete DISASTER! (*Luckily, I made plenty of backups before doing any of this so I was safe*) But Still I had NO iCal!
I searched and searched and could not find a complete solution. So what I did was the following and so far I believe it could be the solution to all of you guys's problems.
I followed these instructions on this website (URL: http://answers.makeitwork.com/how-to-reset-ical-on-your-mac-or-how-to-clean-up-y our-ical/) **I followed these exactly**
They are below:
+Export any Calendars you wish to retain after you reset by clicking on the Calendar you wish to retain and go to File > Export… > Export…+
+Repeat the above process for every Calendar you wish to keep. (Make sure you remember where you saved them)+
+Quit out of iCal+
+Go to Finder and click on your Home icon to display the Library folder.+
+Open that folder+
+Open the Calendars folder in the subsequent window+
+Delete all the contents within that folder+
+NOTE: If you open iCal at this point, it will initially appear that you cleared everything. Within minutes, however, everything will come back.+
+Go to your Utilities folder and open the Terminal application+
+Enter the following command: rm -rf ~/Library/{Caches,Caches/Metadata,Preferences,Application\ Support}/iCal+
+Exit out of Terminal+
+Open iCal and…Voila! Brand new iCal!+
But that did not completely work. So before doing this again, I went to my iPhone and quit syncing calendars on my mobile me account. And chose to ERASE every calendar on my iPhone.
After doing that and repeating the process above, I opened up iCal and boom, it worked. Then after I had the calendars setup the way I wanted on my MacBook, I proceeded to go to Preferences>MobileMe>Sync> and then chose to sync
I then went to Me.com and checked to see if the calendar was operable and it was 100%. I could do everything like before. Then I went back to my iPhone and just turned Calendar syncing back on in my mobileme preferences.
This has solved all my problems 100%. Hope this helps someone. Just remember that as long as you created a backup of your Calendar you should be safe.
-Cody-

Well... seems I didn't have any answer on this. I fiddled a bit more but I have to say that I really came to wits' end at this stage. A couple of observations though:
* I don't really understand this notion of a keyboard issue. My keyboard and its layout work properly but I will not be able to login regardless of login through GDM, KDM or Slim. Yet it's worth noting that in the case of GDM and SLIM the X server starts; I see the graphical interface, I click, etc. but when I type the trouble starts.
* I tried to check my xsessions-errors file. The file is really big under a frame buffer, and it wasn't clear to me, but I found strange that the log was reporting all sorts of attempts to start KDE. I don't exactly know what's going on.
If anybody has any clue, let me know... It's becoming very frustrating.
Thanks!

I keep getting error messages on the calendar since downloading the new software on my IPAD2. It either says "cannont save event. That event does not belong to that event store" or I get an error message that says that no calendar "has been set".

I keep getting error messages on the calendar since I downloaded the new software on my IPAD2. When I try to add a new event it either says "That event does not belong to that event store" or it says "the calendar has not been set". Does anyone know what these messages mean or how to address this?

I'm getting the same issue on my ipad2...I set up a new calender and now I keep getting this error message....how do I fix this?

E71 system error when trying to save new calendar ...

Does anyone know how I can stop this from happening. Every time I try to save a new calendar memo it fails and just comes up with an error saying System Error.
Help please????
Lindsay

I've been trying for some months to get CALENDAR om the Nokia E71 to accept memos,Meetings, etc without getting SYSTEM ERROR message. I've tried backing up data, re-setting phone, re-loading some adat, re-loading all data, etc.
I've now worked out the solution.
Get a new phone, but not a Nokia.
The customer service is lamentable. This error is a basic progrmming error. The fix should take any reputable software programmer 10 minutes to sort out. BUT, it seems that Nokia, having had the punter's money, have moved on to the next release.
On checking the www, it seems that this problem has been around for years, with no known resolution.
This is my first and last posting on this forum.

E52 New calendar items blank text - error / bug

E52 New calendar items error
S/W: 051.018
In Calendar when adding a New meeting in the (Enter subject) box if adding more than one line of text the previous line of text disapears. This makes it very difficult to enter longer subjects in calendar events/meetings.
Nokia please fix? any advice?
Cheers
If you find posts helpful hit the big green box to the left with the star in it... cheers

same for me! text is only in the head of the meeting visible. the textbox color is white - on a white background, makes it invisible. lol. nice business-phone. there are so many problems with this phone. nobody can help me - i really regret buying it.
hardware is good, software is catastrophic

Steps to define new printer in EBS R12

Dear all,
I have hp 3005n printer installed in AIX5.3,
I need to define it on EBS R12. can any one provide me with step by step to do that ??
Regards,
Marwan

Hi,
You can also have a look at the following metalink note
eventhough below note is for Release 11 and Release 11i, but concept is same
Step By Step Guide to Set Up a Printer in Oracle Applications
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=60936.1

Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CR...

Post Author: lkamesam
CA Forum: Integrated Solutions
Hi,
I am running Crystal Reports version 10 from IBM Rational 6.0.1 build 20050725_1800 XML data source. When I try to run the report under WAS 6.0.1 I get the following error:
Does any body have any clue how to resolve my problem? Thanks
Error 500: Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CRDB_XMLImpl This is often caused by having the class at a higher point in the classloader hierarchy Dumping the current context classloader hierarchy: ==> indicates defining classloader *** indicates classloader where the missing class could have been found ==>[0] com.ibm.ws.classloader.CompoundClassLoader@163dd786 Local ClassPath: C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\classes;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\bobj_platform_jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cecore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\celib.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ceplugins.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cereports.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cesession.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\clientlogic.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\Concurrent.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CorbaIDL.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLExternal.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLServer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCharting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalContentModels.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExporters.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExportingBase.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalFormulas.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalQueryEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportingCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ebus405.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\icu4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jrcerom.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jsf_common.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\keycodeDecoder.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\log4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\MetafileRenderer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rasapp.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rascore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rpoifs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\serialization.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\URIUtil.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting-jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xercesImpl.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xmlParserAPIs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent; Delegation Mode: PARENT_FIRST [1] com.ibm.ws.classloader.JarClassLoader@338761606 Local Classpath: Delegation mode: PARENT_FIRST [2] com.ibm.ws.classloader.ProtectionClassLoader@38e75786 [3] com.ibm.ws.bootstrap.ExtClassLoader@7e475784 [4] sun.misc.Launcher$AppClassLoader@7e5a5784 [5] sun.misc.Launcher$ExtClassLoader@7e565784 -Original exception- java.lang.NoClassDefFoundError: OCA/OCAdbdll/DbDLLOperations at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code)) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:576) at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code)) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at com.crystaldecisions.reports.queryengine.driver.i.<init>(Unknown Source) at com.crystaldecisions.reports.queryengine.driver.i.case(Unknown Source) at com.crystaldecisions.reports.queryengine.av.ak(Unknown Source) at com.crystaldecisions.reports.queryengine.av.else(Unknown Source) at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source) at com.crystaldecisions.reports.queryengine.av.do(Unknown Source) at com.crystaldecisions.reports.queryengine.as.new(Unknown Source) at com.crystaldecisions.reports.queryengine.at.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source) at com.crystaldecisions.reports.common.ab.a(Unknown Source) at com.crystaldecisions.reports.common.ab.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown Source) at com.crystaldecisions.report.web.a.a.K(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.bx.a(Unknown Source) at com.crystaldecisions.report.web.event.b1.broadcast(Unknown Source) at com.crystaldecisions.report.web.event.as.a(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.if(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source) at com.crystaldecisions.report.web.ServerControl.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ServerControlTag.doEndTag(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source) at com.ibm._jsp._sample._jspx_meth_crviewer_viewer_0(_sample.java:135) at com.ibm._jsp._sample._jspService(_sample.java:77) at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:88) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1212) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:629) at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:117) at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:171) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:230) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) at

For those who would have the same problem, here is how I could eventually fix it.
Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
Entry point :
http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
As suggested, I used the New Project wizard to create a new project, with :
Application server type : J2EE
Check the radio button "Use remote object access service : BlazeDS"
Then, as indicated in following pages (section "Accessing BlazeDS")... :
file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
Very nice product anyway, so far, congratulations...
Rgds
Marc.

Error while defining Reco to GL

Hi,
I want to add reconcilliation account to a GL but the problem is when i enter reco to a GL and try to save it I get this error bcoz it has balance.
Error is
"Changing the reconcil.acct indicator not possible; acct has a balance
The data contains error, you cannot save"
In this case what will I have to do?
Please help me.

Hi
Define New GL account with the correct Reconcilation Account .
Transfer All the balance to New account ( Adjustment Account )
Delet Old Account.
Regards
Arun.

How do I select a new calendar as a "writable calendar"?

Thunderbird 24.3.0/Mac OS X Mavericks/Lightning 2.6.4.
I have a calendar set up to sync with an Internet cloud service (not Google; not iCloud). This calendar has worked fine for me for months and I have many calendar events and tasks on this calendar. All of those can be modified and I can create new calendar entries, but I cannot create new tasks.
On the Task window, in the New Task field, I see an error message that says "Please select a writable calendar". But I can't enter anything in that field. I can create a new local calendar and move existing tasks from the current calendar to the newly-created one, but I cannot find a way to create any NEW tasks on the existing calendar or the newly-selected calendar. Is there someplace I can select this new calendar as the default for tasks? It would be even better to keep tasks on the synced calendar, but I'll settle if need be.

Tasks are not covered by any standards of formatting and almost inevitably do not synchronize. Thunderbird/ Lightning does not synchronize tasks with Live or gmail either.
SoGO claim to have it working with their open source tools.
see http://www.sogo.nu/

HT1692 I use an iPhone 5, and want to sync my phone calendar and contacts with Outlook 7 calendar and contacts; twpo problems--I now get dozens of new calendars every time, and my calendar will not syncd at all.; meaning that date entries on Outlook do no

I use an iPhone 5, and want to sync my phone calendar and contacts with Outlook 7 calendar and contacts; two problems--I now get dozens of new calendars every time, and my outlook calendar will not sync at all.; meaning that date entries on Outlook do not come across ot iPhone.

It is unusual for the calendar to sync and not the contacts in Outlook. I've worked with Outlook for years. You didn't answer what computer OS you are using. If it is Windows, have you tried to reset the sync history in iTunes? Do that by opening iTunes, go to Edit>Preferences>Devices and click on reset sync history. If you have done this and it doesn't help, then we can try and run scanpst.exe on your Outlook file and see if there are any errors. Search your computer for that file, however it normally resides in one of the Microsoft Office folders in the folder Program files. After that, you can see if it will sync.

Cannot create new Calendar Group in Mountain Lion

I am using a brand new iMac. I didn't use the migration tool-- instead I exported all of my Calendars from Snow Leopard and Imported them via the File menu in the Calendar application in Mountain Lion.
Under the File menu, there is no "New Calendar Group" option. Command-Shift-N results in an error alert sound and no action.
I do not use iCloud for anything other than email-- everything is turned off in System Preferences.
In Calendar, under the Preferences -> Accounts section, I have NO accounts. It is completely blank.
My previous groups from my export/import are there under the "On My Mac" section of the Calendars panel. I can edit them. But I cannot create any new ones.
Any suggestions? Everything on the internet says I need to deactivate my iCloud account calendars... but I don't use them.

Ah, Barney, you are a lifesaver!
Sorry for the late reply, I was away from my computer this weekend.
All of my calendars had been in groups. I moved one of them outside, and TA DA-- "New Calendar Group" appeared.
Thanks so much for the help. I will have to leave 1 calendar outside of a group so I can add as many as I'd like.

How to define new host in catalog?

Hi guys,
I have migrate 9R2 database to new host location and i wanted to run backup using same script which worked on old host but i get error :
Wed Dec 8 13:59:13 CET 2010
Recovery Manager: Release 9.2.0.4.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN> #
2> # Full Backup
3> #
4> # Recovery Manager script
5> #
6>
7> #connect target sys/xxxyyy@dev;
8> connect target "/";
9> connect CATALOG rman/catalog@oemrep;
10>
11> run {
12> backup database plus archivelog delete input ;
13> report obsolete;
14> delete obsolete;
15> crosscheck backup;
16> delete noprompt expired backup;
17> }
18>
19> exit;
connected to target database: DEV (DBID=1703379406)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-04004: error from recovery catalog database: ORA-12154: TNS:could not resolve service name
Recovery Manager complete.
Is this means that i need to define new host location in RMAN CATALOG or what?

You are right!
But still i receive this
Wed Dec 8 14:49:47 CET 2010
Recovery Manager: Release 9.2.0.4.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN> #
2> # Full Backup
3> #
4> # Recovery Manager script
5> #
6>
7> #connect target sys/xxxyyy@ssl21dev;
8> connect target "/";
9> connect CATALOG rman/catalog@oemrep;
10>
11> run {
12> backup database plus archivelog delete input ;
13> report obsolete;
14> delete obsolete;
15> crosscheck backup;
16> delete noprompt expired backup;
17> }
18>
19> exit;
connected to target database: SSL21DEV (DBID=1703379406)
connected to recovery catalog database
Starting backup at 08-DEC-10
current log archived
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/08/2010 14:49:48
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20001: target database not found in recovery catalog
Recovery Manager complete.
So prorbably old host database has different DBID defined in RAN catalog?

Hai , How to create 'Define New ' ?

hai,
How to create 'Define New ' in Combo box and then Enter the value in the user defined table how to get the value from the database table and display combo box ?

Hi.
I used this example for the matrix column. It's work and open a form for defining new values.
Your need to add an event to refresh values in combobox.
Think I help you.
Best regards
Sierdna S.
P.S. How to proceed.
1) Fill the combobox with valid values:
Try
' Add first value to combobox
oCombo.ValidValues.Add("", "")
Dim oRS As SAPbobsCOM.Recordset
oRS = SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
Dim sSql As String = "SELECT Code, Name FROM [@" & sLinkedTable & "]"
oRS.DoQuery(sSql)
oRS.MoveFirst()
While oRS.EoF = False
      oCombo.ValidValues.Add(oRS.Fields.Item("Code").Value, oRS.Fields.Item("Name").Value)
      oRS.MoveNext()
End While
' Last value
oCombo.ValidValues.Add("Define","Define")
If Not oRS Is Nothing Then
      System.Runtime.InteropServices.Marshal.ReleaseComObject(oRS)
      oRS = Nothing
End If
System.GC.Collect() 'Release the handle to the table
Catch ex As Exception
' log exception
Finally
oCombo = Nothing
End Try
2) In Item event handler
If pVal.EventType = SAPbouiCOM.BoEventTypes.et_COMBO_SELECT _
And pVal.FormUID = sFormUID _
And pVal.ItemUID = sMatrixUID _
And pVal.ColUID = sColUID _
And pVal.BeforeAction = False _
And pVal.ItemChanged = True _
Then
Try
    Dim oMatrix As SAPbouiCOM.Matrix
    oMatrix = oForm.Items.Item(MatrixID).Specific
    If oMatrix Is Nothing Then Throw New Exception("ERROR: matrix object is nothing"))
    Try
      Dim oCombo As SAPbouiCOM.ComboBox
      Dim sValue As String = ""
      oCombo = oMatrix.Columns.Item(sColUID).Cells.Item(pVal.Row).Specific
      sValue = oCombo.Selected.Value
      If sValue.Equals("Define") Then
        Try
            oCombo.Select(0, SAPbouiCOM.BoSearchKey.psk_Index)
            oForm.Refresh()
        Catch ex As Exception
        ' log exception
        End Try
        SBO_Application.Menus.Item("<menu id to activate>").Activate()
      End If
      BubbleEvent = False
    Catch ex1 As Exception
      ' log exception
    End Try
Catch ex As Exception
    ' log exception
End Try
End If

Strange C++ error when using newer Sun Studio compiler

My company has just set up a new build machine for our product. We have gone from
this version: CC: Sun C++ 5.7 Patch 117830-11 2007/04/04
to this one: CC: Sun C++ 5.9 SunOS_sparc Patch 124863-01 2007/07/25
we have also upgraded the OS (solaris/sparc). I think the new one has gcc but the old one doesn't (we don't use it).
and now I am getting this error:
"/opt/SUNWspro/prod/include/CC/./new", line 32: Error, badextlnk: operator new(unsigned) was declared before with a different language.
"/opt/SUNWspro/prod/include/CC/./new", line 35: Error, badextlnk: operator delete(void*) was declared before with a different language.
"/opt/SUNWspro/prod/include/CC/./new", line 37: Error, badextlnk: operator new[](unsigned) was declared before with a different language.
"/opt/SUNWspro/prod/include/CC/./new", line 40: Error, badextlnk: operator delete[](void*) was declared before with a different language.
"/opt/SUNWspro/prod/include/CC/./new", line 53: Error, badollnk: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/./new", line 54: Error, badollnk: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/./new", line 55: Error, badollnk: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/./new", line 56: Error, badollnk: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 106: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 169: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 185: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 198: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 202: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 206: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 217: Error, badollnk: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 225: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 239: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 249: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 264: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 275: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
I have no idea what could be causing this. I can find one link to it on this forum: http://forums.sun.com/thread.jspa?messageID=9488983 . But the only answer to that query says it is the same as another bug which appears entirely different, not to mention being very old (while talking about an imminent fix), and being related to a different OS and (I think) a different version of sun studio (express vs. normal?).
Any ideas? Could it be related to having gcc/g++ on the machine?

Hi,
I am also facing the same error while upgrading the Sun compiler description as below
when I am compiling the cxx file on the system with compiler version (CC: Sun C++ 5.9 SunOS_sparc 2007/05/03) , I am facing the following error:-
/opt/SUNWspro/bin/CC -dy -misalign -xcode=abs64 -xarch=v9 -D__EXTENSIONS__ -Dsun4_R5=1 -I. -Isun4_R5_v -I/home/as185259/ash_iadraid/ash_get_10/IA/PORT/include -I/home/as185259/ash_iadraid/ash_get_10/IA/WV/WV5.3.6-ncr0302/build/include/sun4_R5_v -I/app/oracle/product/10.2.0/client_1/sqllib/public -I/app/oracle/product/10.2.0/client_1/precomp/public -I/opt/informix/include -DSVR4 -O -g p -pta -c MContext.cxx -o sun4_R5_v/MContext.o || \
(rm -f sun4_R5_v.d; false)CC: Warning: -xarch=v9 is deprecated, use -m64 to create 64-bit programs
"/home/as185259/ash_iadraid/ash_get_10/IA/WV/WV5.3.6-ncr0302/build/include/sun4_R5_v/ssmalloc.h", line 97: Error: Only one of a set of overloaded functions can be extern "C".
"/home/as185259/ash_iadraid/ash_get_10/IA/WV/WV5.3.6-ncr0302/build/include/sun4_R5_v/ssmalloc.h", line 99: Error: Only one of a set of overloaded functions can be extern "C".
"/home/as185259/ash_iadraid/ash_get_10/IA/WV/WV5.3.6-ncr0302/build/include/sun4_R5_v/ssmalloc.h", line 101: Error: Only one of a set of overloaded functions can be extern "C".
"/home/as185259/ash_iadraid/ash_get_10/IA/WV/WV5.3.6-ncr0302/build/include/sun4_R5_v/ssmalloc.h", line 102: Error: Only one of a set of overloaded functions can be extern "C".
4 Error(s) detected.
The same file with the same compilation command is getting compiled with compiler version CC: Sun WorkShop 6 update 2 C+ 5.3 2001/05/15 .
Can anyone suggest what should be the resolution:-
The code for the ssmalloc.h file is as under:-
#ifndef SSMALLOC_H
#define SSMALLOCH
#include <stddef.h>
#if defined(__sparcv9)
namespace ssmalloc {
#endif
#if defined(__cplusplus)
extern "C" {
#endif
The type for the malloc routine depends on
the compiler and library that you are using.
#if defined(hpux) || defined(sun4_R5) || defined(__GNUC_) || defined(_OS2_)
typedef void MALLOC_PTR;
#else
typedef char *MALLOC_PTR;
#endif
#if defined(_GNUG_)
typedef size_t MALLOC_SIZE;
#else
typedef unsigned MALLOC_SIZE;
#endif
#if defined(sun4) && ! defined(_GNUG_)
# define FREE_RETURNS int
# define FREE_RETURN return 0
#else
# define FREE_RETURNS void
# define FREE_RETURN return
#endif
// User-callable routines.
// Note: memalign and valloc are broken in that they do not aling
// memory on documented boundaries, and thus do not behave as described
// on the "malloc" manual page. They simply call malloc.
MALLOC_PTR malloc (MALLOC_SIZE size);
FREE_RETURNS free (MALLOC_PTR data);
MALLOC_PTR realloc (MALLOC_PTR data, MALLOC_SIZE size);
MALLOC_PTR calloc (size_t nelem, size_t elsz);
MALLOC_PTR valloc (unsigned size);
MALLOC_PTR memalign (unsigned alignment, unsigned size);
// This memory allocator supports memory allocation inside signal
// handlers. For correct operation, the following functions must be
// called upon entering and exiting signal handlers that allocate
// memory.
void ssmalloc_enter_signal_level();
void ssmalloc_exit_signal_level();
// Set this variable to not 0 (possibly in the debugger) if you want
// to get malloc to check memory data structures very carefully as it
// goes. This may be handy if you are trying to detect a memory
// trasher.
// It also causes ssmalloc to abort the program instead of returning
// zero if memory runs out.
extern int check_memory_very_carefully;
#if defined(__cplusplus)
#endif
#if defined(__sparcv9)
} // namespace ssmalloc {
#endif
#endif / SSMALLOCH */
The Machine is
root@ldg1-> uname -a
SunOS ldg1 5.10 Generic_138888-03 sun4v sparc SUNW,Sun-Blade-T6320
Thanks
Vijay

Error in defining new calendar in r12

Similar Messages

Maybe you are looking for