Error in Delta load; error in source system

Hi,
I'm extracting from 0FI_AA_11.
Performed a full load.
Then initialized without data transfer.
When i run delta (0 records) , it fails with 'error in source system' .
Strangely, when I run delta again in REPEAT mode, it runs succesfully.
this is happening everytime i run delta.
Please help

FI_AA_11 is sure capable of handling delta.
It does have some dependencies with master data and these are pretty awkward sometimes.
I don't know when you are running your deltas (during opening hours from the office?) but in your process chain also the MD objects must be present.

Similar Messages

Error Occures while loading data from Source system to Target ODS

Hi..
I started loading Records From source system to target ODS.while i running the job i got the following errors.
Record 18211 :ERROR IN HOLIDAY_GET 20011114 00000000
Record 18212 :ERROR IN HOLIDAY_GET 20011114 00000000
sp Please help me in these following Errors..
Thanks in advance,

Hello
How r u ?
I think this problem is at the ODS level, ZCAM_O04 is ur ODS Name.
Could u check the ODS Settings, and the Unique Data Records is Checked or Not ?
Best Regards....
Sankar Kumar
+91 98403 47141

Error in code page mapping for Source system whil loading the data from ECC

HI Gurus,
I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
Please let me know if there are any settings needs to be made.
Many thanks in Advance
Jagadeesh

HI V,
Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
Do we need to do any settings in LBWE??
Thanks and Regards
Jagadeesh

Short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow

hi all,
i am getting short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow.
not able to figure out the actual issue and how to solve it.
can anyone suggest?
below is the details of the short dump
Short text
    Exception condition "UNKNOWN_TRANSCAT" raised.
What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    A RAISE statement in the program "CL_SERVICE_TRG================CP" raised the
     exception
    condition "UNKNOWN_TRANSCAT".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "RAISE_EXCEPTION" " "
    "CL_SERVICE_TRG================CP" or "CL_SERVICE_TRG================CM003"
    "SORT_TRANSACTIONS"
    or
    "CL_SERVICE_TRG================CP" "UNKNOWN_TRANSCAT"
    or
    "SBIE0001 " "UNKNOWN_TRANSCAT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.

Hi,
It seems like some routine are there and check your rotines , transformation etc.
Regards
sivaraju

Error in code page mapping for Source System

Hi All,
We are Loading data into BI system from MDM System.
It was loading fine but Yesterday we got an error " Error in code page mapping for Source System"
Message Class: RSDS_ACCESS 13.
We alreday tried to Search any IDOCs with error/unprocessed , but there isn't any.
Any pointers for this error will be Helpful.
Regards,
Mayank

Our SP currently SAPKW70019 , the SAP note mentioned above required to apply SP for 13, which we already beyond that...unfortunately we still face the same problem .. almost every day ..
any advice.. ?
Edited by: Edi Erwan Abu Talib on Jun 22, 2009 8:22 AM

Error in ODI while configuring ERPi Source system

Hi All,
Hyperion Version : Hyperion 11.1.2.1
OS: windows 2008
I'm getting the following Error in ODI while configuring ERPi Source system in workspace.
"942 : 42000 : java.sql.SQLException: ORA-00942: table or view does not exist
java.sql.SQLException: ORA-00942: table or view does not exist "
can anyone guide how can achieve this. thanks in advance.
Regards,
Ravi

Hi All,
Please find the below error log from ERPi configurator [Workspace] and let me know further steps to solve this issue....
ERPI Process Start, Process ID: 71
ERPI Logging Level: DEBUG (5)
ERPI Log File: C:\Windows\TEMP\2\/aif_71.log
Jython Version: 2.1
Java Platform: java1.4.2_08
COMM Create Process Detail - Create Process Detail - START
COMM Create Process Detail - Create Process Detail - END
Error in Start PS HCM Setup Source System
java.lang.Exception: The scenario did not end properly.
at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.h.y(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
ERPI Process End, Process ID: 71
Thanks
Ravi

Delta load Error in LO Cockpt

Hi
If I get Error while Delta Load using V3 unserialized update in LO Cockpit....How can I rectify the problem ?
Thanks,
Abhi

Hi Pradeep,
This is the interview Question what I have.
In General, When we extract data from R3 LO Cockpit to BW ( Deltas )every load won't be success.
1. If I get an error in Scheduling the Job Control .. what I have to do ? Where I have to look ?
Is there any place to look otherthan SM37,Delta Queue(RSA7) and Update Tables(SM13)
2.While Delta loading...I have the data in Update tables but I didn't find in Delta Queue. How can I sove this problem ?
Please Clear my Doubts. Points will be awarded.
Regards,
Abhi.

Error Brief : Guideline load error in 856_4010_UCS

In 856 outbound:
we are getting below error in the production environment,but it works fine in TEST environment.
Error Brief : Guideline load error.
Error Description Error : Guideline was not provided in selector configuration for level 'Group'. Please check configuration and resubmit your data.
C
I have tried by uploading group ecs file also, after uploading group ecs the above error gone,but in the wire message the group segment is missed,like below
ISA*00* *00* *01*74754350 *08*1234567 *130829*1606*U*00401*368062916*0*P*>
ST*856*291606366
BSN*00*000455667684433*20130829*1606*0001

Not sure if you are hitting the same Missing group segments in 834 Outbound EDI

CO-PA Delta load - Errors in source system RSM 340

Hi,
We are facing a unique error when we do a CO-PA delta load. The error message is as follows:
"Errors in source system RSM 340,The selected data source is locked by another process RD 156"
The load completes successfully with 0 delta records fetched. When we re - trigger this after sometime, the load goes through.
Can anyone explain as to why this issue occurs ? Basically, looking at the root cause.
We are pulling data from CE1XXXX table, the delta for which is pulled into BW with the setting of 30 minutes safety delta. Just wanted to understand how is it that in this scenario we are faced with a lock issue ? It is also confirmed that while the delta load is initiated the transactions are being passed into the CE1XXXX table.
Thanks,
Amit Mitra

Hi PK,
caller 09 error mainly because of source(target system) and destination(bw system) not configured correctly.
i think you get the error message as follows. file is in the client workstation as like.
better you contact basis people. they will resolve this.
hope this help you
Regards
Harikrishna N

InfoPackage delta load error, but repeat successfully

Hi,
we are facing a strange behavior when executing a infopackage.
The datasource is created via RSO2 using delta = AIMD. We use a programm to select the data and insert it in the deltaqueue.
So the data is already in the queue when we start the infopackage. We only using a dummy function module to trigger the transfer of the data.
So the problem is:
When we start a delta load, it brings up an error (RSM340 - Error in Sourcesystem), but when we make a repair or execute the infopackage again, (immediately or a few minutes later) the load works.
We have checked everything, joblogs, idocs, trfc, authorizations and everything is ok. All jobs are being executed in the sourcesystem correctly and the idoc´s are sent back to the BW.
We are on a SAP BW 7.31 SP7 system.
Does anyone has an idea, where to look or whats could go wrong?
Kindly regards
Maximilian Müller

Hi,
Have you checked your info pack job log details at ecc side, SM37.
if check there you may know more details about your issue.
From failed info pack monitor--> menu Environment-->job overview--> job in the source system, enter ecc user id and password, you will get your ecc job, select job and click on log details, see and share here if you see nay abnormal messages.
Thanks

Sales Document Delta Load Error - Status procedure could not be set

Hello,
I am getting the following error message during the sales document delta loads. It errors out in SMQ2 with this message - "Error in Validation (Details: transaction SMW01)"
In SMW01, I get this message:
<b>The status procedure CRMORD_I could not be set from item category XXX</b>.
Message no. CRM_ORDERADM_I503
Diagnosis
Possible causes are:
1. The system administrator has not assigned the status profile CRMORD_I to the object type.
2. Initial statuses that should be set in the status profile CRMORD_I cannot be set at present.
3. The current user RFCUSER does not have the authorization to set application statuses.
Detailed error messages can be found in the following error log for status management.
System response
The status profile is not set in the document.
Procedure
Set the status profile in Customizing so that these cases do not occur.
This status profile has been assigned to the item category mentioned and the RFCUSER has full authorization (SAP_ALL)
Do any of you know what else could be the problem here?
Thanks,
MAX

Dear All,
I met similar error before, it happens when you change the item category in ECC but there is a status profile assigned to the item
category in CRM with an active status set.
In CRM, when the item category is changed, the system can only change (or delete) the status profile if there is no user status set for this item. So for example, if there is already a status set for an item (Say, E0001 'Open' is active) in CRM, so a change of the user status profile is impossible. If you need to change the item type, then you have to make sure that there is no active user status in the item.
Please see note [1113116] point 2. This is a restriction in CRM. If you try to make the same changes directly in CRM you will also get the same error.
It is not allowed to change the item category if the document has been saved and the status profile of the new item category is different from the old one.
That is the reason why the error occurs when the data reaches CRM frm ECC.
In order to prevent that there are sysfails in the inbound queue you can implement note [1438966] - after this is implemented you will not have the queues failing but you will get the error message in the sales order in CRM.
You should ensure that the configuration for alternative item categories is R/3 is the same as in CRM and in this case all the alternative item categories should have no status profile or all the same status profile configured.
I hope this could be helpful.
Best regards,
Maggie

Delta loading error - how to correct

Hi,
A error occurs on a delta loading based on 2LIS_02_ITM datasource.
The PSA had not been loaded because of a dump due to a tablespace overflow.
I can't reinitialize this delta because there are too much data and I can't reload from the PSA which had not been loaded.
The tablespace error is now corrected.
What can I do to reload this delta without loosing data?
Thand in advanced for your help.
Best regards,
Bertrand

Hi.......
So request not even came till PSA also.........right.......that u mean to say........there is no failed request also in the target or in the target?........U can make the QM status red of the failed load...........delete the request from the target......and try to repeat the IP..........just check whether the system asking u for repeat delta or not...........it should ask ......bcoz records r not transfered in the BI side..........otherwise ........u hav to go for a Full repair.......but for that u hav to know that what range of records are missed.......u can give a tentative larger range.......
1) Delete init flag
2) Do Full repair(After filling the set up table)
3) Do init without data transfer
4) Delta.....
Hope this helps.......
Regards,
Debjani......

Query Runtime Statistics - Delta Load Errors

Good Morning,
We recently upgraded our BI system to 7.0. One of the consultants who was here activated some standard business content, as the title of my subject shows, Query Runtime Statistics. The Infocube that is being loaded in the process chain he activated is: 0TCT_C01.   This load utilizes 4 individual delta loads, coming from Datasources: 0TCT_DSA1, 0TCT_DSO1, 0TCT_DSO2, and 0TCT_DSO3.
The problem we're having is that at least 2 of these frequently fail ( 0TCT_DSO2 and 0TCT_DSO3 ).
The failure messages we get is that some of the data coming in for object 0TCTSTATOBJ (Query Runtime Object) is always bad.   Some example values of the data that it is trying to load include:
FILTER(1)
TABELLE(1)
GENERISCHER NAVIGATIONSBLOCK(1
I'm not seeing anything in particular that would indicate these as being invalid values. The ()'s I wouldn't think would be causing it, given that those are in our system as acceptable characters (checked RSKC to verify) and there's nothing else that looks out of place (aside from the values coming in as German). Has anyone else come across an error like this for this particular statistics load? Manually changing these erroneous in the PSA is not an option given the frequency of the failures.
Any help would be greatly appreciated. If I need to clarify or relay any additional information, please let me know as well. Thanks

Sita,
I greatly appreciate your response. However, I probably should have provided some additional technical information regarding the issue.
The values I posted actually are from the PSA. These values that are given are telling the person what Java object the report being used, has had an issue (may not just be reporting issues, but general statistics for the use of these java objects, not sure yet).
I am aware that when BI gets an invalid character, it replaces it (in the display screen) with a #. Unfortunately, we do have # in our permitted characters and the reason why that doesn't work to qualify what was entered is because while it shows up in your display screen as a #, in the background it still sees it as the invalid char.   Subsequently, you won't always be able to see what that invalid char is. We've encountered this many times over the years with our Sales Orders when a Rep (or someone within the company) enters invalid characters (typically they do a copy and paste from Excel using a different Font, or are using arabic or other foreign characters).
Given that the values we're recieving are in German, my only conclusion is that the words themselves contain german characters often used in certain letters. For example, the letter U can sometimes have what they call an umlout (spelling may be off on that). An umlout almost looks like a quotation mark that is placed directly above the letter itself.   Another common letter in German is the ß symbol.
We may be able to bypass our problem by entering in these german characters, but I guess I was looking for more than just a "hack" solution and was curious if anyone else out there has had a similar issue on their system and if they were able to come up with a solution other than trying to guess and add in "special characters" that are not normally used in the english language.
Again, my appologies for not being more descriptive and thank you again for replying.

Error while adding oracle as a source system to BW

Hi Experts,
I am trying to connect BW to the oracle database. While connecting I am getting the error "Source System XXXXX Cannot Be Accessed".
I checked for the TNS name and Connection Info in TNSNAMES.ORA and everty thing seems to be good.
Please Advice.
Regards,
K.Manikandan.

Hi Manikandan,
Is the DBSL installed on the Oracle database. Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/a1/89786c3df35c4ea930a994e884bb4c/frameset.htm
Also check OSS Note:323151
Bye
Dinesh

Transport Error - DS does not exist in Source system

Dear All,
I am getting below Error while transporting the DSO from DEV to Quality.
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A.
I have checked the dataosource is active and available in Development system. But Its giving error while importing.
As per the dataflow the data of this DSO is updated to Cube.
Has anyone solved this issue, because i have checked in SDN but there are no suitable answers.
Regards
Sankar

Hi,
Your right I am transporting ZM_ALT Dso . The following log of the error we are getting.
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
Mapping between data source 8ZM_ALT and source system DCQCLI041 is inconsistent
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
Field /BIC/ZM_AA will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_APPL will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_BEM will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_MOD will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NCDS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NDESC will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NES1 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NES2 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NIN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NPCS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NPN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Regards
Sankar

Error in Delta load; error in source system

Similar Messages

Maybe you are looking for