Error in delta load

Hi,
When I ran the DTP from DSO to Cube, the request turned red and the error message says that there were some error records.
Please let me know how to correct this.
Regards,
Preethi

Hi Preethi,
The error occurred because there is error values in some field values,
Check the details and long text of error so that you can get theerror description and error values.
These error records will be collected in error stack. (it is present in the top of DTP monitor)
You can edit the records from there and run the error DTP.
Regards,
Srinath.

Similar Messages

Short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow

hi all,
i am getting short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow.
not able to figure out the actual issue and how to solve it.
can anyone suggest?
below is the details of the short dump
Short text
    Exception condition "UNKNOWN_TRANSCAT" raised.
What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    A RAISE statement in the program "CL_SERVICE_TRG================CP" raised the
     exception
    condition "UNKNOWN_TRANSCAT".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "RAISE_EXCEPTION" " "
    "CL_SERVICE_TRG================CP" or "CL_SERVICE_TRG================CM003"
    "SORT_TRANSACTIONS"
    or
    "CL_SERVICE_TRG================CP" "UNKNOWN_TRANSCAT"
    or
    "SBIE0001 " "UNKNOWN_TRANSCAT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.

Hi,
It seems like some routine are there and check your rotines , transformation etc.
Regards
sivaraju

Error in delta load (Urgent)

hello gurus,
i had loaded a delta form inventory(2lis_03_bf) where it got error while loading to 2 data targets,
then i made the traffic singles to red in the monitor screen to do a repeat .
where after doing ,i got problem ..I'M not able to go and start the repeat in InfoPackage
if i try to do the schedule, screen is taken to ABAP run time error.
Plz help ME in high priority
Points are alloted

Delete all the requests from the cube for which the data was not loaded . Try reloading.
Next time, when you get into such problems, instead of mamking the requests to red, just wait for a few minutes for the job to finish and then try to diagnose the problems and you can fix it once and for all.
Ravi Thothadri

Error in delta loading from a planning cube

hi all,
I am using a delta load from one planning cube to another.When the changed records are of a magnitude of 100 then it is successful but when the records are of magnitude of 100000 then it stays yellow with no data records sent and eventually fails.the packet size is 20000.
any help is appreciated.

Hello Ajay,
Have you checked that your Request is closed in the planning cube? FM RSAPO_CLOSE_TRANS_REQUEST will do it
It is a customizing issue to tell the infopackage to end "green" when it has no data.
Transaction Spro ==> SAP Netweaver ==> SAP Business Information Warehouse ==> Automated Processes ==> Monitor Settings ==> Set Traffic Light Color. There you have to set the Traffic light on green if no data is available in the system.
Hope that helps
best regards
Yannick

Error in delta load of 'Customer Group' from R/3 to CRM

Hi Experts,
I added new 'Customer Groups' in R/3. But this is not being updated in CRM. Do I have to trigger initial load again through R3AS or should I create new Customer Groups in CRM?
The BP delta load BDocs are stuck in SMW01 due to this change. Also, if I need to do the Initial load of Customer Group, which object do I need to do the load for? Is it dnl_cust_sales?
Please help as it is a Production issue.
-- Pat

Hi Pat,
Use object 'DNL_CUST_SALES' to download Customer Group from R/3 to CRM.
Use R3AS4 transaction to execute the same.
Best Regards,
Pratik Patel
Reward with Points!

Error in delta load activation

Hello every one,
we have generated generic data source and assigned delta on Shipment number with lower limit 10.
when we loaded data through initial load it got all the records from R3 and scheduled delta (suppose to get 0 records because no data was generated ), Delta is bringing 6 records with it and getting error while activating in ODS due to duplicates.
1.How these 6 record came from with out generating data in R3..
2.while activating it is showing error by saying below message
>System error occurred (RFC call)
>Key value exists in duplicate (Not allowed by the ODS object type)
>Activation of data records from ODS object ZODSNAME terminated
>No confirmation for request ODSR_4APQX0IG5LKYJX8248G9QB314 when activating the ODS object ZODSNAME
>Request REQU_4APPPJ630P70EWTMMY686TTSO , data package 000001 incorrect with status 5
>Request REQU_4APPPJ630P70EWTMMY686TTSO , data package 000001 not correct
>Inserted records 1- ; Changed records 1- ; Deleted records 1-
If i am not clear ..please ask i am ready to give required inputs
Please through some light so solve this issue and to load delta properly with out error.
Thanks in Advance
Sandy

Hello Praveen,
Appreciate for your reply....
we created the Data source from View
and the activated the Delta with Numeric pointer where the lower limit was 10 and the upper limit was empty
Then replicated and started loading init first and delta next.
correct me if i am wrong.
Thanks
Sandy

Error in delta load activation in ODS

Hello every one,
we have generated generic data source and assigned delta on Shipment number with lower limit 10.
when we loaded data through initial load it got all the records from R3 and scheduled delta (suppose to get 0 records because no data was generated ), Delta is bringing 6 records with it and getting error while activating in ODS due to duplicates.
1.How these 6 record came from with out generating data in R3..
2.while activating it is showing error by saying below message
System error occurred (RFC call)
Key value exists in duplicate (Not allowed by the ODS object type)
Activation of data records from ODS object ZODSNAME terminated
No confirmation for request ODSR_4APQX0IG5LKYJX8248G9QB314 when activating the ODS object ZODSNAME
Request REQU_4APPPJ630P70EWTMMY686TTSO , data package 000001 incorrect with status 5
Request REQU_4APPPJ630P70EWTMMY686TTSO , data package 000001 not correct
Inserted records 1- ; Changed records 1- ; Deleted records 1-
If i am not clear ..please ask i am ready to give required inputs
Please through some light so solve this issue and to load delta properly with out error.
Thanks in Advance
Sandy

Hello,
1. The records may be due to Safety delta interval you have maintained in your generic datasource. In RSA7, you can check STAT column for your data source. Click on the Pointer for Generic delta. you would see Shipment Number from which next delta would be pulled it.
2. Have you unchecked "Do Not Check Uniqueness of Data" in your DSO. This may be the cause for activation failure as same records are coming in as per the safety interval maintained.

Error on delta load 2LIS_04_MATNR CALL_FUNCTION_NOT_FOUND

Hello Everyone,
When trying to load delta from 2LIS_04_MATNR i get the below error message.
Please any suggestions on how to fix this?
Function module "/BI0/QI2LIS_04_PEMATNR0002" not found.
The function module "/BI0/QI2LIS_04_PEMATNR0002" was called, but cannot be
found in the Function Library.
The current ABAP/4 program "SAPMSSY1 " had to
one of the statements could not be executed.
If you have access to the note system yourself, use the following
search criteria:
"CALL_FUNCTION_NOT_FOUND"
"SAPMSSY1 " or "SAPMSSY1 "
"XAB_RUN_DRIVER"
Function modules with names similar to "/BI0/QI2LIS_04_PEMATNR0002":
/BI0/QI2LIS_04_PEMATNR0001
/BI0/QI2LIS_04_PEMATNR
/BI0/QI2LIS_04_PECOMP0001
/BI0/QI2LIS_04_PECOMP
/BI0/QI2LIS_03_BF0002
/BI0/QI2LIS_02_CGR0001
/BI0/QI2LIS_02_HDR0001
/BI0/QI2LIS_02_SCL0004
/BI0/QI2LIS_02_SGR0001
/BI0/QI2LIS_02_SCL0002
The termination occurred in the ABAP/4 program "SAPMSSY1 " in
"XAB_RUN_DRIVER".
The main program was "RSFHGEN2 ".
The termination occurred in line 232
of the source code of program "SAPMSSY1 " (when calling the editor 2320).

Hi,
did it ever work? Does it work with a full upload? Did you transport it and does it work in a other system but not in the transported system? What Version are we talking about? Did you activate it from Business Content?
br
Joerg

Error in Delta load; error in source system

Hi,
I'm extracting from 0FI_AA_11.
Performed a full load.
Then initialized without data transfer.
When i run delta (0 records) , it fails with 'error in source system' .
Strangely, when I run delta again in REPEAT mode, it runs succesfully.
this is happening everytime i run delta.
Please help

FI_AA_11 is sure capable of handling delta.
It does have some dependencies with master data and these are pretty awkward sometimes.
I don't know when you are running your deltas (during opening hours from the office?) but in your process chain also the MD objects must be present.

Bdoc error in Delta load

Hi Experts,
I have an issue in Delta processing.
When new customer is created in ECC with complete address information, it is ended with BDOC error in CRM2007. The error is
Incomplete address; enter country AM 216
if i maintain the Vendor ID in ECC, this error is not appearing. As per our requirement Vendor ID is not required to maintain.
Any suggestions for next steps to resolve these errors with out maintain vendor id in ECC? Thanks for any input anyone can offer.
Regards,
A

Hi,
I have looked into your issue.
This is a very generic error. General context is, if you have not filled the country you will get this error. But yes there are other reasons for this error to occur:
When you have some user exits in your system, at the time of Main data getting mapped to BAPIMTCS, exits might be defaulting the BAPIMTCS data of Address before it is sent to CRM server.
So this error occurs very much when there are user exits present and which might modify the data before it is sent to CRM and in CRM, when the address data is not present then obviously this is going to be raised.
This has to be checked in your system. I hope this helps.
Regards,
Venkat

Error during delta load for bulk upload data object

Hi All,
I am getting the following message in the backend integration logs for one of the bulk enabled data object.
Error message:
Unable to find parent record for record of node 'CHILD2'.
Message : SMMWKGN class 005.
Does anyone know about this error.
I have defined the the fields as key in child nodes which are defined as key fields in Header structure?
Also while executing the getlist and getdetail i am able to see all the related data?
Can somebody suggest?
Thanks
Dev

found out the problem. Solved

Delta load Error in LO Cockpt

Hi
If I get Error while Delta Load using V3 unserialized update in LO Cockpit....How can I rectify the problem ?
Thanks,
Abhi

Hi Pradeep,
This is the interview Question what I have.
In General, When we extract data from R3 LO Cockpit to BW ( Deltas )every load won't be success.
1. If I get an error in Scheduling the Job Control .. what I have to do ? Where I have to look ?
Is there any place to look otherthan SM37,Delta Queue(RSA7) and Update Tables(SM13)
2.While Delta loading...I have the data in Update tables but I didn't find in Delta Queue. How can I sove this problem ?
Please Clear my Doubts. Points will be awarded.
Regards,
Abhi.

Error while implementing Delta Load

Hello Experts,
I need your help.
I am trying to extract data from SAP R/3 to BI system.
The R/3 system contains data from 1999-2008 fiscal year. I extracted data for fiscal yr 2007,2006 and 2005 successfully and created a delta info package
In the delta info package I didn't specify any fiscal year limit under the Data selection tab.
I started a background job which needs to run daily. Now my issue is the load came up with an error stating time limit exceeded. I believe the number of data packets exceeded. The request showed a warning sign and it got stuck there. I tried to delete that request and consequently delete the whole delta info package and creating a delta package freshly.
But when I tried to start the process of extraction, the following message popped up. Please tell me what I need to next.
Init. select. for field name currently running in request REQU_464F7XQP5TZIEJPIS0MUV32IB
Message no. RSM1070
Diagnosis
Init. selection for field name with the 'From value' and the 'To-value' , is currently running in request REQU_464F7XQP5TZIEJPIS0MUV32IB.
Procedure
Wait until the init. selection is completed; check the load status in the Monitor.
Thank you. Appreciate your help.
Raj

Hello guys,
I tried to delete the delta request by right clicking on the infopack and hitting manage, and then selecting the particular request and hitting delete.
But when I tried to create a new infopack and initialize it it constantly gave me the same error saying that I need to delete the previous request.
There is another place where you need to delete the request from.
You need to double click on the delta infopackage and on the top menu click on
Scheduler > Initialization options for Source System > Now select the particular delta request and delete it.
This solves the problem and helps you to reintialize the delta load using the new delta infopackage

Unknown error message at delta load

We are working with the IPC 3.0, SP17 in a stand alone version. For data loading we are using always the initial load. Since the condition data get more and more, it needs to much time for loading that with the initial load and we want to use the delta load now. When I have made the customization in the R3 system, now I have the problem that I get always the following error messages:
java.lang.Exception: A901 is not existing in global scheme. (A901 is a customer condition table, but for SAP tables I get the error message, too)
java.lang.Exception: Specified source/destination Type doesn't exist in Scheme
I do not found any documentation about this error messages.
Can someone help me ?

It's an error in some third-party software you installed, possibly called "Remote Advisor."

ODS to ODS delta load error

HI
Im loading data into a consolidated ODS from 5 based ODS's. Im doing a delta load from the base to the top level ODS.
recently i made change in the cons ODS.I added a key figure to the ODS(not a key field). Now when i try loading delta again, it gives an error.something which says 'ORA 14400 Inserted partition key does not map to any partition'
has anyone of you come across such an issue.
help will be appreciated
jpjp

HI JP
This is an error on oracle partitioning.. please check the note.
ORA-14400 means=
ORA-14400 occurs if you want to insert an entry in the table that does not match the value range of any partition. In such a case, you must compare the value of the entry with the definitions of the partitions to determine the cause of the error.
please look in to this note..
Note 722188 - FAQ: Oracle partitioning
Note :991181 search this tooo
Hope it helps little
Regards
AK

Error in delta load

Similar Messages

Maybe you are looking for