Error in deployed compoents when running diagnostics & support desk tool

when I run netweaver Business Explorer diagnostics & support desk tool
I got error in "deployed components".
the message says:
"The SCA 'BI-BASE-S' (7.00 SPS 9, patch level #0) is a invalid combination of version/support package with your WebAS ABAP system (7.00 19)"
the solution says
"Ensure that both your WebAS Java and your WebAS ABAP have a valid combination of version and support package stack level. Please note that beginning from BI SP 11, the versioning scheme of BI ABAP SPs has changed"
then I was referred to note 1013369 and 1163789. then which SCA file SPS/patch do I need for ABAP SPS19?
what do I need to do? and how do I do this? my basis guy need advice.
George

Hello George,
To correct this issue ensure that both your WebAS Java and your WebAS ABAP have a valid combination of version and support package stack level.
Also you can check the note 1013369 - SAP NetWeaver 7.0 BI - intermediate Support Packages
and check the compatibility table.
I hope that this can help you.
Kind regards
Diego Ferrary

Similar Messages

Following error occurring when running application in wireless tool kit

Hi
Following error occurring when running application in wireless tool kit
java/lang/ClassFormatError: Bad version information.
can any suggest y ?

Hi,
I am also facing the same problem......................
java/lang/ClassFormatError: Bad version information
The error occurs when I try to simulate the mobile device using wireless tool kit. Does it have anything to do with the antivirus/firewall running on my system?
Did Ram get a solution to his problem? Can anybody please help?
Many Thanks
Merin
HI
Sorry i could not find any related information there
the version of wireless toolkit i am using is 2.1
well in release notes its given that it also
supports cldc1.0 and midp1.0
presently i am using cldc1.0.4 and midp1.0.3
versions
is there any version compatability error
please suggest me its quite urgent

Error -17300 is generated when running selected step

Error -17300 is generated when running selected step (with ot without process model).
Using TestStand 2.0.1f1
See BMP file for error dialog.
I was trying out the example in the Resource Library - TestStand | Process Models | Running Selected Steps via Execution Entry Point -Test UUTs or Single Pass
(link http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3E2B756A4E034080020E74861&p_node=DZ52222&p_source=external ). This example is a 1.0.1 example but the web page does say that it should work in 2.0.x
I followed the readme file to use from "Execute" menu:
I have attached the resulant SequentialModel.seq file.
The modifications to the SequentialModel.seq file appears to wo
rk, but when I tried to run 'Run Selected Steps Using' menu item. I got the error message -17300 displayed. (see ErrorScr.bmp attached). The only way to close the execution was to launch Task manager and 'End Task'.
I have attached a small demo sequencefile.
To try example:
Move the SequentialModel.seq to 'C:\TestStand\Components\User\Models\TestStandModels'.
Launch TestStand Sequence Editor and open 'Debug Example1.seq'.
This is how to generate error condition-
1. Run the sequence file from menu Item Execute | Single Pass. You should get a full run with test result, it fails but that doesn't matter.
2. Select Steps 1 and 3 in Main of MainSequence. Run Selected Steps using Single Pass. Again sequence executes correctly.
3. Now run the same selected steps using the new menu item Execute | Selected Test(s). Again the sequence executes again.
4. With Steps 1 and 3 still selected. Run Selected Steps using Single Pass (as in 2 above). This time the error -17300 will be gener
ated.
I also tried running the sequence first doing step 1 (as above), then step 3, then repeating step 1 and this was ok. So the problem appears to be in interactive only.
Any clues as to whats going on and how to resolve it.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
SequentialModel.seq ‏174 KB
Debug_Example1.seq ‏19 KB
ErrorScr.bmp ‏915 KB

Hi,
TestStand 2.0.1f1
Attached is a SequentialModel.seq that will run selected steps in a new execution using the process model. (It started life based on the inital
demo example)
When either Test UUT's or Single Pass is selected a check is made to determine if there is an initial selection.
If there isn't then the normal Test UUT's or Single Pass sequence is run.
If there is then a new sequence file is created with a new MainSequence. The selected steps are cloned and inserted to the new MainSequence. Also
the Setup and Cleanup groups are also cloned. Likewise the FileGlobal Defaults are copied to the FileGlobals of the new Sequencefile and also the
Locals.
Any Sequences contained in the SequenceFile are cloned to the new sequencefile (except the MainSequence, SequenceFileLoad and SequenceFileUnLoad).
In addition, as the Steps are cloned any break point are also set in the new sequence file.
The new sequence file is executed in a new execution using the process model entry point with the break on first step controlled from the menu
option.
One thing I am assuming is that there is only one element in the RunState.InitialSelection.SelectedSequences array.
Question: Under what circumstances will there be more than one selected sequence?
I had one problem, I tried my SequentialModel.seq with the demo auto.seq. This contains the SequenceFileLoad and SequenceFileUnload.
When I run this demo with a few steps selected, it run ok but when I closed the results window the UnloadFile callback was executed.
I found an option that can be set with the Engine.ReleaseSequenceFileEx which should have stopped the UnloadFile callback from running. But it
made no difference.
I then came across SequenceFile.UnloadCallbackEnabled() and using this function it did disable the Unload callback and this worked.
Question: So, Why didn't setting the Option in the Engine.ReleaseSequenceFileEx work?
Limitation using this SequentialModel.seq,
1) Any precondition to a step's execution based on the result of an early steps are not check when cloning the selected steps. Therefore this has
to be done manually when making the selection.
2) All Sequences in the SequenceFile are cloned to the new sequencfile. (May not be a problem when SequenceFile contains only a few sequences.)
3) The selections are limited to the MainSequence. If steps are selected in a Subsequence then these would be copied to a new MainSequence and
this would be run. Providing this doesn't require any parameters passed from the original caller then this should still run. The problem will
arise if parameters are required.
4) This is not really a limitation - If a full run of the SequenceFile using Test UUT's or Single Pass is required then the user must ensure no
steps are selected.
What I whould like to happen is the ability to make a selection in SubSequence calls either one or two levels down from the MainSequence. The new
execution setup would contain those steps in the MainSequence that are required to call those selected steps in the lower levels.
Would welcome any comments on my SequentialModel.seq attached and answers to my questions.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
SequentialModel.seq ‏233 KB

HT1567 When running diagnostics, iTunes doesn't detect an optical drive at all. What do I do next?

When running diagnostics, iTunes doesn't detect an optical drive at all. What do I do next?

I think, no... I know you failed to provide complete details of everything that had been attempted.
Then you responded with a smart donkey comment.
Best of luck finding a resolution.

Error 513, no message was created in support desk system BCOS005

Hi All,
After completing the ITSM config on Solution Manager 7.1, I am stuck with the following error when creating message from any of the satellite system, or from SM itself.
"Because of error 513, no message was created in support desk system"
Message no. BCOS005
Error logs from SLG1:
"No message created from SAP message 00xxxxxx 000xxxxx 2013 due to missing IBase"
Transaction: SOLMAN_INCIDENT_UPD
Program:AI_CRM_IM_UPDATE_FROM_SAP
I have already checked various threads and suggested notes including 1522809 / 1741109, but unable to fix the issue.
RFC's between both the systems are working fine. The entry for BCOS_CUST on SM is maintained as
OSS_MSG W NONE CUST 6.2 1.0
The number range for SLF1 is maintained as 01 in TCode DNO_CUST01
I suspect this to be related to IBASE or Number range, but seem to have the correct values maintained as mentioned in above notes. Would appreciate your valuable inputs on this.
Thanks,
Varun

Hi Vivek,
Tried updating the parameter, but no luck
"Because of error 513, no message was created in support desk system"
Message no. BCOS005
Should be something to do with BCOS, can't figure out though.
Any further thoughts?
Regards,
Varun

Error 513, no message was created in Support Desk System

After implementing QAS in sp's 15, when the user wants to create a message from QAS solution manager, get the following error "Because of error 513, no message was created in Support Desk System"
has been revised rfc connections and have no problem because when the user is done with NetWeaver - works perfect basis.
Nor is it because of permissions users have the same roles that were assigned in the other systems DEV and PRD, and when they have no problems sending messages.
I have reviewed the table BCOS_CUST "and is fine. As in other systems.
I am grateful if someone can help me.
Regards

Dear Leonor,
This forum is related to Public Sector Funds Management (budget) issues.
I believe the best for you is to open this thread in the Basis forum. There you will find the experts to help you.
Best Regards,
Vanessa.

ADS error in bi diagnostic and support desk tool

Hi
I have done the configuration for ADS acoording to confign guide.I am getting the error in export check(PDF lib,ADS,...) in bi diagnostic and support desk tool.
ERROR:com.adobe.ProcessingException:the rules specified requires return pdf or render named:node does not exist.
Also when i check with report FP_CHECK_DESTINATION_SERVICE i am getting the same error.
System Error: com.adobe.ProcessingException:the rules specified requires return pdf or render named:node does not exist.
Please help me out.
Regards
Pranav

Hi, Pranav, we have hit this same problem, and the oss note is not supplying the answer, do you remember what the answer was?
Would appreciate the help.
Thanks.
Paul.

BI : Diagnostic and support desk tool

Hello
I'm currently using BI7.0 SP9 and the support desk tool version 0.370.
I have a current red light that i'm not able to solve :
URLs Prefixes Customized on Both J2EE and ABAP Side
and the long text is :
The URL for ABAP customizing table RSPOR_T_PORTAL: http://cod..airliquide.com:50100 is not compatible with the URL for URL with which you call the WebAS Java: http://cod:50100
and it told me to apply OSS note 596698 as well as note 654326 for details
The problem is not solved on this note.
I would like to know how to chanfe the URL in the abap part whan i call the java part to use the long name and included the domain on it ???
regards
François

Hello
closed
we have to use http://hostname.domainName:5XX00 instead of http://hostname:5XX00 to avoid such issue
François

What is support desk tool?

Dear SAP Experts,
What is support desk tool?
And How can I execute it?
Thanks and Best Regards,
Zilla

Hello Zila,
Support desk tool is an application that check the configuration of your system and collect informationabout your SAP NetWeaver BI installation.
There is a note that explains this as well as how to execute it. Please, see 937697.
I hope this helps you.
Kind regards,
Blanca

Error. your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.

I have the following inside my SharePoint server 2013 :-
EnterPrise Wiki site collection.
i have both "Excel services Application "& "Visio Graphics Service" running correctly.
The problem i am facing is as follow:-
when a user click on an Excel sheet or Visio document , it will be shown inside the browser without any problem.
but if the user click on "Open in Visio" OR "Open in Excel" links inside the browser, they will get the following errors:-
Sorry, but to open this workbook, your computer must be running a supported version of Microsoft Excel and a browser that supports opening files directly from Office Web Apps.
To open this document, your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.
I have the following settings inside my PC:-
Office 2010 for Excel, word, power point,etc.
Visio 2013.
i have disabled SharePoint foundation support for office 2013
Can anyone advice on this please?

Hi,
Please try to reset the Internet Explorer settings or open Internet Explorer in In-Private browsing and then check if this issue occurs.
If the issue persists, please try to access SharePoint in another computer with Office 2013 and then check if this issue occurs. Or repair Office and restart your server.
Here is a blog about the same issue for you to take a look at:
http://sharepointexit.blogspot.com/2013/12/sorry-but-to-open-this-workbook.html
Best Regards
Dennis Guo
TechNet Community Support

Error in the Informatica when running the DAC load( Prebuilt Analytics)

Hi All,
Please help me with the below issue with the informatica i am getting when running the DAC load:
Below are the details:
SELECT F0006.MCMCU,F0006.MCSTYL,F0006.MCCO,F0006.MCAN8,F0006.MCDL01,F0006.MCRP06,F0006.MCUPMJ,F0006.MCUPMT,F0006.MCUSER,F0101.ABAN8,F0101.ABLNGP, F0101.ABEFTB,F0101.ABUPMJ,F0101.ABUPMT,F0116.ALAN8,F0116.ALEFTB,F0116.ALADD1,F0116.ALADD2,F0116.ALADD3,F0116.ALADD4,
F0116.ALADDZ,F0116.ALCTY1,F0116.ALCOUN,F0116.ALADDS,F0116.ALCTR,F0116.ALUPMJ,F0116.ALUPMT,
CAST(F0006.MCRP08 AS CHAR(10)) AS FLEX_ATTRIB_1_CHAR ,
CAST(F0006.MCRP10 AS CHAR(10)) AS FLEX_ATTRIB_2_CHAR,
CAST(F0006.MCRP19 AS CHAR(10)) AS FLEX_ATTRIB_3_CHAR,
CAST(F0006.MCRP08 AS CHAR(10)) AS FLEX_ATTRIB_4_CHAR,
CAST(F0006.MCRP13 AS CHAR(10)) AS FLEX_ATTRIB_5_CHAR,
CAST(F0006.MCRP14 AS CHAR(10)) AS FLEX_ATTRIB_6_CHAR,
CAST(NULL AS CHAR(10)) AS FLEX_ATTRIB_7_CHAR,
CAST(F0006.MCRP01 AS CHAR(10)) AS FLEX_ATTRIB_8_CHAR,
CAST(F0006.MCRP15 AS CHAR(10)) AS FLEX_ATTRIB_9_CHAR,
CAST(F06.MCRP16 AS CHAR(10)) AS FLEX_ATTRIB_10_CHAR,---------------------------Table name should be F0006
CAST(F0006.MCRP12 AS CHAR(10)) AS FLEX_ATTRIB_11_CHAR,
CAST(F0006.MCRP27 AS CHAR(10)) AS FLEX_ATTRIB_12_CHAR,
CAST(F0006.MCRP21 AS CHAR(10)) AS FLEX_ATTRIB_13_CHAR,
CAST(F0006.MCRP03 AS CHAR(10)) AS FLEX_ATTRIB_14_CHAR,
CAST(F0006.MCRP13 AS CHAR(10)) AS FLEX_ATTRIB_15_CHAR,
CAST(F0006.MCRP23 AS CHAR(10)) AS FLEX_ATTRIB_16_CHAR,
CAST(F0006.MCRP21 AS CHAR(10)) AS FLEX_ATTRIB_17_CHAR,
CAST(F0006.MCRP24 AS CHAR(10)) AS FLEX_ATTRIB_18_CHAR,
CAST(F0006.MCRP19 AS CHAR(10)) AS FLEX_ATTRIB_19_CHAR,
CAST(NULL AS CHAR(10)) AS FLEX_ATTRIB_20_CHAR,
CAST(F0006.MCRP12 AS CHAR(10)) AS STATE_REGION,
CAST(F0006.MCRP04 AS CHAR(10)) AS COUNTRY_REGION,
'0' AS X_CUSTOM
FROM F0006
LEFT OUTER JOIN F0101 ON
F0101.ABAN8 = F0006.MCAN8
LEFT OUTER JOIN F0116 ON
F0116.ALAN8 = F0006.MCAN8 AND
F0116.ALEFTB=F0101.ABEFTB
As mentioned in the SQL the table name should be F0006 instead F06, I have checked the Source Qualifier transformation and below is the SQL issued
SELECT F0006.MCMCU,F0006.MCSTYL,F0006.MCCO,F0006.MCAN8,F0006.MCDL01,F0006.MCRP06,F0006.MCUPMJ,F0006.MCUPMT,F0006.MCUSER,F0101.ABAN8,F0101.ABLNGP, F0101.ABEFTB,F0101.ABUPMJ,F0101.ABUPMT,F0116.ALAN8,F0116.ALEFTB,F0116.ALADD1,F0116.ALADD2,F0116.ALADD3,F0116.ALADD4,
F0116.ALADDZ,F0116.ALCTY1,F0116.ALCOUN,F0116.ALADDS,F0116.ALCTR,F0116.ALUPMJ,F0116.ALUPMT,
CAST($$FLEX_ATTRIB_1_CHAR AS CHAR(10)) AS FLEX_ATTRIB_1_CHAR ,
CAST($$FLEX_ATTRIB_2_CHAR AS CHAR(10)) AS FLEX_ATTRIB_2_CHAR,
CAST($$FLEX_ATTRIB_3_CHAR AS CHAR(10)) AS FLEX_ATTRIB_3_CHAR,
CAST($$FLEX_ATTRIB_4_CHAR AS CHAR(10)) AS FLEX_ATTRIB_4_CHAR,
CAST($$FLEX_ATTRIB_5_CHAR AS CHAR(10)) AS FLEX_ATTRIB_5_CHAR,
CAST($$FLEX_ATTRIB_6_CHAR AS CHAR(10)) AS FLEX_ATTRIB_6_CHAR,
CAST($$FLEX_ATTRIB_7_CHAR AS CHAR(10)) AS FLEX_ATTRIB_7_CHAR,
CAST($$FLEX_ATTRIB_8_CHAR AS CHAR(10)) AS FLEX_ATTRIB_8_CHAR,
CAST($$FLEX_ATTRIB_9_CHAR AS CHAR(10)) AS FLEX_ATTRIB_9_CHAR,
CAST($$FLEX_ATTRIB_10_CHAR AS CHAR(10)) AS FLEX_ATTRIB_10_CHAR,
CAST($$FLEX_ATTRIB_11_CHAR AS CHAR(10)) AS FLEX_ATTRIB_11_CHAR,
CAST($$FLEX_ATTRIB_12_CHAR AS CHAR(10)) AS FLEX_ATTRIB_12_CHAR,
CAST($$FLEX_ATTRIB_13_CHAR AS CHAR(10)) AS FLEX_ATTRIB_13_CHAR,
CAST($$FLEX_ATTRIB_14_CHAR AS CHAR(10)) AS FLEX_ATTRIB_14_CHAR,
CAST($$FLEX_ATTRIB_15_CHAR AS CHAR(10)) AS FLEX_ATTRIB_15_CHAR,
CAST($$FLEX_ATTRIB_16_CHAR AS CHAR(10)) AS FLEX_ATTRIB_16_CHAR,
CAST($$FLEX_ATTRIB_17_CHAR AS CHAR(10)) AS FLEX_ATTRIB_17_CHAR,
CAST($$FLEX_ATTRIB_18_CHAR AS CHAR(10)) AS FLEX_ATTRIB_18_CHAR,
CAST($$FLEX_ATTRIB_19_CHAR AS CHAR(10)) AS FLEX_ATTRIB_19_CHAR,
CAST($$FLEX_ATTRIB_20_CHAR AS CHAR(10)) AS FLEX_ATTRIB_20_CHAR,
CAST($$STATE_REGION AS CHAR(10)) AS STATE_REGION,
CAST($$COUNTRY_REGION AS CHAR(10)) AS COUNTRY_REGION,
'0' AS X_CUSTOM
FROM F0006
LEFT OUTER JOIN F0101 ON
F0101.ABAN8 = F0006.MCAN8
LEFT OUTER JOIN F0116 ON
F0116.ALAN8 = F0006.MCAN8 AND
F0116.ALEFTB=F0101.ABEFTB
The error code and error message in the workflow monitor says:
Message Code: VAR_27028
Message: Use override value [F06.MCRP16] for mapping parameter:[mplt_BC_SDE_JDE_InternalOrganization_BusinessUnits.$$FLEX_ATTRIB_10_CHAR].
Some how it is overridng all the values so please let me know what i can do.
Thanks in Advance

Oracle Support

My DAQ program uses Traditional NI-DAQ in Visual C++ 6.0. I get error-10609 at SCAN_Start when run

My data acquisition program uses Traditional NI-DAQ in Visual C++ 6.0. When I run the program, I get error -10609 at the SCAN_Start that states
A transfer is already in progress for the specified resource, or the operation is not allowed because the device is in the process of performing transfers, possibly with different resources.
Why do I receive this error?

Hi,
TThe error -10609 can result from several situations in which the device's resources are already in use.
A Measurement & Automation (MAX) test panel is already open.
If you open a test panel window for your device and attempt to run your application, you can get this error. If this is the case, close the MAX test panel.
An AI Clear function was not used at the end of the previous acquisition.
If you do not call the AI Clear function after performing your acquisition, the resources remain open. Be sure to call this function, inputting your taskID, at the end of the acquisition.
Multiple programs are accessing the device.
If you have multiple VIs accessing the device, or perhaps a LabVIEW VI and another application, the resource will be taken and you will receive the error. You can only run one application accessing the specific resource (for example, analog input on channel 0) at a time
I hope this helps...and have a Great Day!
George

How to capture error messages for BCP when running through XP_CMDSHELL

XP_cmdshell returns 0 as success when running BCP that causes insertion failure for any records (failure because of truncation, data type mismatch etc.)
One way is to capture output message in temp table and can parse the messages. but I am looking for some direct methods.

Hi Naveen Raikwar,
We can use insert/execute syntax to insert error output to a file, here is a good article, please see:
http://www.sqlservercentral.com/articles/Error+Handling/69196/
And here is a similar thread, please refer to:
http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/b37ec1fd-ea2f-4546-93c1-8bb9d589710d
Thanks,
Eileen
Eileen Zhao
TechNet Community Support

Deployment failing when running .bat script or command line file package

HI Guys,
I am trying to run a .bat file on a client using a program. My data source point to the script's folder.
I keeps failing with error 1.
I have trying making run in 64-bit using this without luck: http://madluka.wordpress.com/2012/09/24/configmgr-2012-64bit-file-system-redirection-bites-again/
Here is the content of my .bat file:
@ECHO OFF
IF NOT "%PROCESSOR_ARCHITEW6432%"=="AMD64" GOTO native
ECHO "Re-launching Script in Native Command Processor..."
%SystemRoot%\Sysnative\cmd.exe /c %0 %*
EXIT
:native
ECHO "Running Script in Native Command Processor..."
c:\
cd c:\windows\System32
start cmd.exe /c shutdown -l
stop
I will get the same error when running a simply command line as well. Instead of a .bat file.
any ideas?

Maybe this will help you:
http://blog.coretech.dk/kea/configuration-manager-shutdown-utility
This instead of using "shutdown.exe -l" command. This tool can be used for logoff also. Hope it helps!
My blogs: Henk's blog and
Virtuall | Follow Me on:
Twitter | View My Profile on:
LinkedIn

Error while creating change request via solman support desk message

I have configured CHARM and my change req. is working for urgent correction, I have tested the entire workflow.
however when i try to create a new change req. via support desk message --> create a change request open
I get following error
An action was terminated due to an exceptional situation.
Message no. SOCM_ACTION_LOG 090
Diagnosis
An exception has been triggered in PPF action processing.
System Response
Action processing has been terminated. The status of the transaction is still incorrect.
Procedure
You cannot execute the action until the cause of the error has been removed.
The error messages will be kept until the transaction is next checked for subsequent analysis.
Procedure for System Administration
If necessary, analyze other messages in the application log for the incorrect transaction. To analyze the termination, you can activate the breakpoints in the checkpoint group socm_exception.
Additional Information:
Exception CX_SOCM_PRECONDITION_VIOLATED occurred (program:
CL_HF_HELPER==================CP, include:
CL_HF_HELPER==================CM00A, line: 29).
pls help

Hi Yunus,
Your probably have changed the transaction type SLFN to a the customer namespace Z or Y. If this is the case you MUST also "Define Mapping Rules for Copy Control".
Goto SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Change Management -> Change Request Management -> Extended Configuration -> Change Transaction -> Change Transaction Types -> Copy Control for Change Request Management -> Define Mapping Rules for Copy Control.
Once at this point in the IMG make a copy of SLFN -> ZLFN. This will resolve your problem.
Kind regards,
Latief

Error in deployed compoents when running diagnostics & support desk tool

Similar Messages

Maybe you are looking for