ERROR in depreaction area to company code

HI all,
i am using ECC 6.0. i copied depreaction area from USA and tried to assign same to my company code but it is geving following error:
Inconsistency between FI company code 1234 and chart of deprec. 123C
Message no. AC481
You tried to assign chart of depreciation 123C to company code 1234. According to its Customizing definition, this company code manages parallel currencies.
The chart of depreciation does not contain a corresponding depreciation area for each of the currency types that are defined in the company code.
System Response
This assignment is not possible.
Procedure
1. Check the currency types of the company code.
2. Specify a corresponding depreciation area for each currency type.
can any one give me solution for this problem
Thanking you

hi,
please check your company code whether you maintain parallel currencies.
make the settings for the depreciation areas also.

Similar Messages

Error in PPMOD feature while assigning functional area under company code.

Hi Experts,
I am getting error in PPMOD feature while assigning functional area under company code.
The error is " The total fields lengths of the decision operations are too great ".
Please advice.
Regards,
IFF

Hi IFF,
The return values which you have maintained for the decision parameter are not acceptable that's why it's throwing that error.
Your PPMOD feature is based on company code and functional area.
Try to maintain it as follows:
000010                                  D     BUKRS
000020     1000           D     FKBER
000030     1000 0001                 &PPMOD=1,
000040     1000 ****                 &PPMOD=2,
000050     2000                 &PPMOD=1,
000060     2100                 &PPMOD=2,
000070     2900                 &PPMOD=2,
000080     2910                 &PPMOD=1,
000090     ****                 &PPMOD=2,
Please try to create this features value again using tree format, so that you can know the actual length of the return string and update the thread once done.
Edited by: pdk_hcm on Sep 6, 2011 2:30 PM

There are 2 Company Codes, i want to do only consolidation

Hi Friends,
There are 2 Company Codes, i want to do consolidation of both these legal entities.
Let me know the possibility friends.
its to understand the possibility.
Whether the same can be done using Group cahrt of accounts.
Correct me if iam wrong..
Thanks & regards,
Neela

Hi Ruchika,
In fact i didn't tell you the scenario.
2 company codes currency is SGD.
This they want to do consolidation without new gl & EC-CS.
This is where the hicup is, we have to choose Business area consolidation only.
But the question here is should we need to have 2 chart of accounts.
In my view there has to be only 1 chart of accounts.
But my doubt is whether we need Group chart of accounts or not in this scenario.
Please throw some light on this friend/friends.
Regards,
Neela

Valuation Area at Company Code level

Hi,
In what ideal business case/industry one should set valuation area at company code level when SAP recommends valuation area must be set at Plant level ? in other words..what is the practical purpose of Valuation area at company Code level?

Hi
Think that valuation area link with records in table MBEW. So, if you have a company with 3 plants, and you have a single valuation for all company, in 3 plants the valuation of materials are the same, with their implications in valuation of stock and valuation of margin in sales (remember that this value can flow -really, use to flow- to condition VPRS in SD, well see SAP Note 1365939 - VPRS logic and Customizing settings in SD and SAP Note 547570 - FAQ: VPRS in pricing for more details). If you do a valuation different by plant, stock and margin calculations are different.
What are the elements that you must considerer?
1. If the materials is purchased, think if the same material have different conditions (different conditions in MM, for instance, indirect costs as shipment costs, different vendor with meaningful differences in prices or discounts). It's indiferent that it is a raw material or a material that you can sell. The raw material will work in product costing as an item in BOM. First of all, considerer the impact in stock value, second think how is delivered the materials to customer from plants and their impact in profitability analysis. If there are meaningful differences for the same material between different plants and you give the same value in all company, depending of the mix perhaps your customer is fooling himself about this issue.
2. If the material is manufactured, talk with your CO consultant and what kind of impact could have different routings, BOM and prices of raw materials between plants. Same considerations for valuation of stocks and margin.
Finally, in the page 10 of the document you can read
Valuation must be at Plant level in the following cases:
u2022If you want to use the application component Production Planning (PP) or Costing
u2022If your system is a SAP Retail system
I hope this helps you
Regards
Eduardo
PD: I forgot, talk this with the CFO of the company, taking in account the restrictions (when it must be plant level).
Edited by: E_Hinojosa on Nov 23, 2011 9:23 AM
Edited by: E_Hinojosa on Nov 23, 2011 9:24 AM

Valuation area is company code

Hi experts,
In our scenario, we have 2 plants and one storage location. only one balance sheet is preparing for both the plants( as is ).
My question is, if only one balance sheet preparing for both the plants, can I select the valuation area as "COMPANY CODE'" ?
If I change the valuation area as company code level, then, what are the changes I find when compared to plant level.
Also tell me how can I change the valuation area.
can anybody tell step by step.
Thanks in advance
kishore

In SAP, you need to choose either Plant Level or Company code level to valuate your material stocks. Once you've set, it is not possible to switch the valuation level from plant to company code or vice-versa unless data conversion (material master's accounting data) is carried out again.
We recommend to setting material valuation at Plant level because you can have separation set of account determination and stock type at each plant.
Also it is important that stocks must be valuated at Plant level,
when u implement the PP module the default valuation level will be PLANT
plz read the note at this SPRO > Enterprise structre> Definition>Logistics - General>Define valuation level (at left to valuation level)
u will get clear idea
hope it clears
regards
kunal

ERROR in depreaction area assign to company code

HI all,
i am using ECC 6.0. i copied depreaction area from USA and tried to assign same to my company code but it is geving following error:
Inconsistency between FI company code 1234 and chart of deprec. 123C
Message no. AC481
You tried to assign chart of depreciation 123C to company code 1234. According to its Customizing definition, this company code manages parallel currencies.
The chart of depreciation does not contain a corresponding depreciation area for each of the currency types that are defined in the company code.
System Response
This assignment is not possible.
Procedure
1. Check the currency types of the company code.
2. Specify a corresponding depreciation area for each currency type.
can any one give me solution for this problem
Thanking you

Hi,
if you use multiple local currencies in FI, then you have to set up so called "parallel depreciation areas" to at least depreciation area 01 (more precise to each realtime posting depreciation area). And I would recommend to set up as well parallel depreciation areas to all other posting depreciation areas (periodic or direct posting and/or posting depreciation only).
You can find detailed information in the SAP Help Portal under [Parallel Currencies in General Ledger Accounting |http://help.sap.com/erp2005_ehp_03/helpdata/EN/4f/71dfb9448011d189f00000e81ddfac/frameset.htm]
Regards,
Markus

Error Mssg: FI673 while assigning company code to FM area

Hi,
I have multiple company codes and only one company code (A) is assigned to FM area and another company code (B) is not assigned to FM area but some transactions have already been posted in dev client, I got the following error message while trying to assign the company code B to the same FM area.
"You must not change assignment to company code B
Diagnosis:
There is already actual data for FM area, which is assigned to company code B"
Please note that I have already deleted the FI transactions for company B thru t-code OBR1 but unable to delete the CO transactions as multiple company codes assigned to one CO area.
Please let me know how to overcome this issue of assigning the company code B to FM area.
Thanks
VS

Hi,
check SAPNET note 1502436 maybe its helpful.
Best regards, Christian

Error Asset 0 not in company code during creation of service puchase order

Dear All,
I am getting the following error while creating service order in ME21N. My account assignment category "P" and Item category "D".
The error message is "Asset 0 not in company code"
Kindly give your suggestions to solve this problem.
Thanks and Regards,
Manivel.S

HI,
as per me if you are using P then you have to give WBS element in PO
P nothing but direct consumption for project stock
Regards
Kailas Ugale

Error in Invoic Idoc - Vendor, Company code not found

Hi All,
We are facing an issue with an Incoming Invoice Idoc (Mes type - Invoic). A third party system sends the Invoices which are received by the XI system and then as Idocs into SAP.
The XI system is defined as a Logical system in R/3. We have created Partner Profile, Dist Model with XI as a LS.
The error that we are encountering is -
Customer , vendor <our LS> not known
Message no. FD110
A company code cannot be determined for LS
Message no. FD006
Are we missing out some data in the Idoc or are we missing some EDI configuration?
Please advise as to how we need to proceed.
Thanks in advance!
Liz

hi,
Error : A company code cannot be determined for LS
This means that SAP cannot match an appropriate company code with a partner profile :- and hence, doesn't know where to post the invoice.
Partner Type = "LS" (Logical System)
Partner Name = ""
I think what you've got is message FD006 - longtext for it can be found via transaction SE91 and sounds like this:
The system cannot determine the relevant company code since the allocation of the data transferred in the invoice is missing in Financial Accounting customizing.
The company code can be determined outside of the system and be put into the intermediate document (for example, from the EDI subsystem). Then the company code must be put into the E1EDK14 segment and ORGID field and the value "011" used as the qualifier.
Determine the company code for & & & in Financial Accounting customizing.
LS is your Logical System. So you might want to have a look at transaction OBCA where you can assign a company code name in the invoice for your Logical System.
In the E1EDKA1 segment. there are two fields PARVW (which is the qualifer or Partner function) PARTN (partner number). The information that is sent in the PARTN has to either match the information in SAP or has to be converted.
If the later is the case try transaction VOED.

While cancelation of migo i get error posting period 07-08 company code

while cancelling migo i get error msg posting period 07-08 company code my migo is dated 23.07.2010 pls help

Hi,
Please check what fiscal year calculation yu are using in the system ! is it from April to March or from January to december...
as well check which period open currently in the system OMSY is TCode or MMRV.
as well please search SDN portal for same kind of questions.
Regards,
Ninad Kshirsagar

Deactivating business area to company codes.

HI
can you please explain me how to prevent postings to specified business area from particular company code.
thankyou
shivaji.

hi Shivaji,
you can create a validation where you check the company code and the business area and block the process of posting accordingly.
hope this helps
ec

Finding controlling areas from company codes

Hi,
can any body tell me the way to find the controlling areas
given the company codes lke we find the sales org from the company codes using OVX3.
Thanks in advance,
Ramakrishna.

Hi,
OX19 Controlling Area: Assgn. to CCode

Link of Business Area and Company Code

hii
from which table i can find the link of Business Area and the Company Code....
thanx in advance
abhishek

FILCA table
RCOMP and RBUSA

One Credit Control Area - Multiple Company Codes - Credit Management

Hi All,
my client has a requirement to go for one common control area & with different company codes.
suppose if i have a customer in multiple company codes & i desire to have the credit control happening for individual company codes, is this possible???
can i use the individual limit field extensively for credit limit per individual company codes???
please pour your thoughts, i have a subsequent question too.
regards
ilango

in this case how can i have the FD32 screen differentiated for different company codes?
say for an european company code, i will have the document currency EUR & for the same customer in US, i will have it as USD.
can i have this segregated?
sorry, too many questions in single thread, but i dont want this to be tracked in different threads, Hope the moderator agrees too.
regards
ilango

How to create an EHS Work Area on Company Code level?

Hi,
Is it possible to create work area on company level?
(In CBIH02 the EHS work area can only be created within a Plant)
I had a look at the following transactions related to link a work area to Organization Management, I'm really
confused and have no idea how to realize it.
Path: EHS > Industrial Hygiene and Safety > Work Area > Link to Organizational Mangement
PPSC - Create Structures
PPSM - Edit Structures
PPME - Edit Matrixes
Help is much appreciated.
Roy Derks

Hi Roy,
I doubt on Company Level. As work Area's standard hierarchy goes like that - Work Area -- Plant -- Location -- Production Process -- Activity -- Machine -- Task.
I would revert back if I could get something.
Regards,
Akash

ERROR in depreaction area to company code

Similar Messages

Maybe you are looking for