Error in Depreciation Run with several areas

Hi!, I´m using Fixed Assets Addon.
I´ve defined one FA with 2 Depreciation areas:
- Posting to G/L
- Additional Area
I try to Deprecation Run in:
- Posting to G/L- works fine
- Additional Area- Return 'Error: 0()' and don´t make deprecation Any ideas?

hai,
Fill all the detail in asset master, like business area, cost center and Depreciation useful life.
govind.

Similar Messages

Error in depreciation run - assets under construction

Hi!
Could someone please help me with the following:
My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
2) Executed depreciation in background.
3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
Please help!
I am very thankful for any help!
Many many thanks in advance!

Hi, Can you please how the issue is solved because i have the same problem which i need to resolve immediately. Please reply me as soon as possible
with regards,
Prabhakar

Error in Depreciation run for 7 th period

Hi Guruu2019s
When we run depreciation run year 2008 for period 7 has failed with the following error :
Account 'Accumulated dep. account unpl. deprec.' could not be found.
however it has posted to few assets and not posted to few assets, when I checked in the log for posting run there is a message saying that u201Cthere are error in the posting run.after correcting, restart the run.
u201C2documetns were createdu201D
If I go to previous log for posting there is no error message and it says with green signals that 3 documents were created. From 1 to 6 periods, in every log says that 3 document were cresated
Only this particular run says 2 documents were created.
Any advise?
Thanks in advance
Regards
Sunitha,

It looks like that in period 7, you do the first "unplanned depreciation". That's explain why the error only happen in period 7.
The problem happens because GL account for "unplanned depreciation" is not created.
Try to check in t-code : AO90 => Choose your Chart of Account => Choose Account determination for asset class in which you did the unplanned depreciation => Choose Depreciation => Check all GL accounts assignment in "UNPLANNED DEPRECIATION ACCOUNT ASSIGNMENT".
Then check in t-code :FS00 whether the GL Accounts (in "UNPLANNED DEPRECIATION ACCOUNT ASSIGNMENT) are exist or not.
If the GL accounts are not exist then you should created the GL accounts first. Afterwards, try to running the AFAB again using "Restart".
Good luck.

Profit Center blocked error in depreciation run

We are upgrading SAP system from 4.6 to 6.0. It was noticed that Profit Center blocked error is being captured in depreciation run test run in the upgraded version. In 4.6, this error is not being captured. Is this an enhancement in the upgraded version?

I have not search information about it. I found this change only positive. Now you have direct to solve the error (wrong profit center) and not later with the retirement. It is only when they block profit centers or assign an other profit center to a cost center that they have to contact asset accounting for changing the asset. In the old version the values on the profit center where wrong, now you have to correct them. I see this more as a bug in the old version that is solved now.
When you don't want this have a look to the error message and turn it of when that is possible, but then you accept that the vallues in profit center accounting are wrong

Error - Application will run with a wrong client window ID!

Anyone here knows how to resolve this error:
An error occurred while starting the iView.
Application /webdynpro/dispatcher/ ... ... ... will run with a wrong client window ID!
Do not continue; please report this problem to your administrator.
The user encountered this pop-up message after she upgraded her browser to IE8. However, she's the only one having this error. Others who have switched to IE8 didn't encounter this error.
SAP Note 1171930 -- is not applicable to us.
Your prompt response is appreciated.

I guess you need not use the library. The note says its a problem with library.
It applies to you if you use custom framework page other than standard framework page.
SAP can give you better response on why only one user gets it. In my scenario, we are able to consistently reproduce this.
And I guess most of the bugs will have similar statements attached 'it occurs only for one user'.

Error when Depreciation Run

Dear All,
This error message displayed when i running the Fixed Asset Depreciation Run directly until period 10, while it is ok if i running the Depr Run until period 8 and 9.
"The depreciation run 100000001 failed and has been cancelled;
Error: -10 ( - Overlapped I/O operation is in progress. )"
The error arises when i tried the depr run until period 10 onwards.
Please let me know if you have any solutions.
Thanks in advance.
Regards,
Lina Yuanita

Greetings,
Hi there, we've received the same error message before and SAP Support's reply is that this is because of the Budget setup. Below is their support message:
This problem is caused by budget deviation.
Kindly refer to the solution as follows:
1) choose Adminstration => System Initialization => General Setting
=> Budget Tab.
2) tick 'Block Deviation from Budget'
3) perform Depreciation Run in Fixed Assets
4) adjust the budget of accounts in accordance with the error message
poped up in step 3
5) perform Depreciation Run again
BTW the error message("-10(Overlapped I/O operation is in progress)")
in this scenario had been improved in B1 2007A. It will be more
user-friendly and comprehensible.
PS: Maybe we should keep the forum posts in English even if I do understand Bahasa Malaysia / Indonesia

Depreciation run with special period

We require 2 set of FS reports:-
1.) FS as at 14/12/2007
2.) FS as at 31/12/2007
We have use the following period to derive the the reports
1.) Period 12 (Transactions 1st - 14th Dec 2007)
2.) Period 14 ( Transactions 15th - 31st Dec 2007)
Q1.)Should Dec depreciation run on period 14?
Q2.) If yes, will the depreciation run capture the depreciation from 1st - 31st Dec 2007?
Q3.) We have tried to run Dec depreciation in period 14 but error "According to the posting cycle, you should post period 012 next."
Pls advise
1.) Steps to run Dec 2007 depreciation in order to capture the whole month depreciation.
2.) Which period to open in OB52.
Kindly assist as this is urgent. Points will be rewarded. Thank you

Dear Hari,
Thank you for the helpful points. Rewarded.
FYI, our cut off date is 14th Dec 2007. Any transactions after this date will go to period 14. In OB52, we set only period 14 open to block user from posting to other periods. Will this affect the depreciation run (given scenario where we run AFAB for period 12)?
When we run AFAB for period 12, this is the error we get:
Period 12 is not allowed
Message no. F5567
Diagnosis
The period entered (12) is different from the period calculated (14) and is also not in the interval for special periods (013 to 016).
System Response
Error.
Procedure
Correct the value entered for the posting period.
What shoud we do?

Depreciation run for Business area

Hi all
We design some business areas are belong to 1 company code.IF each BA want to depreciation run by itself
How to depreciation run independent for each BA. If anyone know it, please teach for me.
Thanks all
Tora86

Thanks Sridevi
I know that depreciation run at companycode level. But my project have some difficult problems, So I want to find way depreciation run at BA level. we can config or customize anything?
Thanks all
Tora86

WinProducer2 start error, won't run with nVidia Capture drivers

I'm not having a good experience with the bundled WinProducer2 that came with my MX440VT8x-128.
If I have either of the versions of the nVidia capture-drivers that came on the card's CD (that's v. 1.16 or 1.18) installed, or the 1.22 version from nVidia's website (as of 2-20-03), and then try to start WinProducer, I get the same start-error every time:
"WinProducer.exe has generated errors and will be closed by Windows....need to restart program...an error log is being generated."
If I look at the Dr. Watson log, it says WinProducer 2 generated "Exception Violation c00005."
If I uninstall the nVidia capture-drivers, WinProducer2 opens right up just fine, but, of course, with no capture capability.
I downloaded and tried (after uninstalling v.2) WinProducer3 from InterVideo's website yesterday (2/20/03), with the exact same results! ???
Anybody else having this problem?
This is under Win2k, w/SP2, then added SP3, with no improvement.
Stenn

After I made the original post, I tried a lot more things that didn't help:
I booted in safe mode and tried it but PSP gave an error message that it wouldn't run with the screen resolution that low (800x600); so it did try to run. So I booted normally and set the screen rez to 800x600 manually, then tried to run PSP and got the same error message.
I did a clean boot with all start-up programs and all services disabled; PSP still wouldn't run.
I disabled my anti-virus and PSP still wouldn't run.
Disabled my video card in the device manager and booted with my on-board video; PSP still wouldn't run.
There's never an error message as long as the screen rez is high enough; when I try to run it, it looks like it's starting to run but nothing ever happens.

Error in depreciation run

HI Gurus,
After upgrading to ECC 6.0, I am not able to run the depreciation. I get the below mentioned error
Create document number range 03 using internal number assignment
    Message no. AA776
Diagnosis
    Processing terminated because the document number range 03 for year 2007
    was set up with external number assignment.
System Response
    For periodic posting of depreciation, you have to create a document
    number range with internal number assignment, since the document numbers
    are assigned from Financial Accounting.
Procedure
    Change the number assignment for the number range 03 from external to
    internal in Customizing for Asset Accounting. See SAP Note 890976 for
    more information.
I am not able to change the number assignment from external to internal for no range 03 as the ext tick is greyed
Request your help for the same.
Note 890976 is already applied
Urgent help is required..pls help
Kiran

Hi Take the help of your functional and ABAP team to look into that issue.
Regards,
iqbal

Error in depreciation run- number assignment

HI ALL,
After upgrading to ECC 6.0, I am not able to run the depreciation. I get the below mentioned error
Create document number range 03 using internal number assignment
    Message no. AA776
Diagnosis
    Processing terminated because the document number range 03 for year 2007
    was set up with external number assignment.
System Response
    For periodic posting of depreciation, you have to create a document
    number range with internal number assignment, since the document numbers
    are assigned from Financial Accounting.
Procedure
    Change the number assignment for the number range 03 from external to
    internal in Customizing for Asset Accounting. See SAP Note 890976 for
    more information.
I am not able to change the number assignment from external to internal for no range 03 as the ext tick is greyed
Request your help for the same.
Note 890976 is already applied
help required...pls
Regards,
Kiran

Hi,
First option:
try to delete the 03 number range & create it once again.
Second Option:
go to OBA7   & Select documnet type AF & double click,
change the number range 03 to 04,
then maintain the number range in FBN1 for 04.
maintain this number range as internal ( dont tick teh external button.
Regards
Chandra

Error In Depreciation Run in the period 08 the following is the error

Dear all
While executing the Deperciation run in the bacground in the period 8 system througing a error message that the Object ORD 600020 has system status CRTD (Created). According to this status, transaction 'FI: Postings' is not allowed. how do i resolve this issue.
Can any one help me out this please. to post the depreciation for the year 2006 and till date.
Rao
Edited by: venkateshwararao Kongara on Nov 15, 2008 8:18 AM

Please run the depr program under test mode with list assets checked and recreate the error. Then please send us the long text of the error message.
Would you please check how is the ORD *** linked to Asset accounts?

Error during Depreciation Run

Hello Experts
While running the depreication run through T.Code AFAB, i am being facing the folliwing error
Error when creating line items using line item schema SAP_500_001...
Message no. AA548
Diagnosis
The system found inconsistencies in the structure of the FI document line items. Line item schema SAP_500_001 does not provide reliable results in relation to posting to the general ledger.
Procedure
Check line item schema SAP_500_001 for this posting transaction. There are two possible causes for the error:
1. A value field was updated on the asset, and this value field is updated to a reconciliation account in FI (for example, an asset balance sheet account, accumulated depreciation or down payments), but there is no line item defined for this value field in the line item schema.
2. The error message can also be caused by incorrect account allocation. In order to find out if you have incorrect account allocations in the account determination for Asset Accounting, carry out a consistency check of the accounts. The consistency check is part of FI-AA Customizing.
Kindly suggest what needs to be done
Regards
Anil

locked.
First of all, search. This same error message was reported earlier.
Second, look at the error and follow the instructions. Did you run the consistency check report?
Third, search OSS. I just found 12 notes related to this error.

Error in Depreciation Run - AFAB

Hi All,
When i run the depreciation posting(AFAB), except one document others got posted.The error document says that it cant be posted as it is blocked by other user.
Depreciation documents are generated automatically by the system during the batch processing and how can it be blocked?
Plz help me out in this .
Thank You
Regards
Andrew

Hi,
To check which master data is blocked go to the session of AFAB and select the programme and go to the Job Log button in SM37 transaction code which will give the list of the error and who has blocked it.
Hope this helps,
Thanks and Regards,
Gokul.

Error while Depreciation Run

Hi Experts,
When I am trying to run depreciation , the following error is being displayed -
Account 425485 requires an assignment to CO object, i am already assigned cost center in Asset Master Data.
Pls suggest the solution as early as possible.
Thanks in Advance,
Neeli
Points-gaming

You can try two ways:
1. in cost element master data -> CO Account Assignment, KA02->Default Account Assignment
2. in IMG Automatic CO Account Assignment, OKB9
regards,
ranjith

Error in Depreciation Run with several areas

Similar Messages

Maybe you are looking for