Error in Determining the Business System??

Hello All,
I am using a client proxy from ECC 6.0. When I try to run it manually, it is giving error saying "GET_BUSINESS_SYSTEM_ERROR: An error occured when determining the business sytem
NO_BUSINESS_SYSTEM ".I have already created Business System.
What could be the reason for this.?? SLDCHECK is working fine. entries in RZ70 are also correct.
Same proxy in CRM 2007 system is working fine.

Read,
ABAP Proxy error : GET_BUSINESS_SYSTEM_ERROR
Dump "GET_BUSINESS_SYSTEM_ERROR" when changing relationships.
They might help
Regards
Juan

Similar Messages

Error occurred when determining the business system (NO_BUSINESS_SYSTEM)

Hi ,
I am working on a POC(ECC 6.0(proxy)>PI 7.1>(proxy)ECC 6.0).
I have created
1) IR objects.
2)Proxy generation & report program to fill the proxy structure.
3)ID objects. (reciever CC, RA, ID, RD)
I am getting below short dump on Sender ECC side,
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_AI_SYSTEM_FAULT', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
Error (id=GET_BUSINESS_SYSTEM_ERROR): An error occurred when determining the
business system (NO_BUSINESS_SYSTEM)
pls let me know, what might be wrong.
santosh.

Hello,
You may need to create your business system and point it to the Integration Server on SLD.
Generally it acuses an error on tcode SDLCHECK, for this please check note #1143810.
Regards,
Caio Cagnani

SAP ABAP Client proxy Errror occured when determining the Business system.

Dear Friends
I am trying to push data from ECC to PI and then MS-SQL Server. My SAP scenario is ABAP Proxy to JDBC
I have created on Enhancement Implementation for AS01 ( Asset Master creation). Here I am calling my ABAP proxy and uploading ANLA and ANLZ strucutre to my abap proxy. but I get the run time error. that suggest Error occurred while determining the Business system - SLD_API_Exception.
My all IR and ID objects are activated, I have tested the scenario successfully without error in ID,
When I check SM21 it suggest that error is due to XI is unable to access the SLD. Could_not_determine_sld_access_data.
SLDCHECK works fine in PI system.
SLDCHECK is failed in my ECCDEV 400 client System.
Is it mandatory to configure SLD access in ecc development system as well ? is this the reason why I am not able to push the data to my PI system? Please tell me How can I solve this error? you any answer will be appreciated greatly.
Please look the below link it contains the enhancement code of AS01 transaction code where I am calling abap proxy to send the data. Runtime analysis report, SM21 log, and SLDCHECK failed screen shot in 400 client. SLD working fine in PI system. my SLD is configured in SOLMAN system.
You can see the error and Code from this link -> [Code , Runtime Dump Analysis report, SM21 Log and SLDCHECK|http://www.scribd.com/doc/61192432/Sap-Abap-Proxy-Error]
Please help me How can I solve this ?
Regards
Naeem

Hi Naeem,
>>>is it mandatory to configure SLD access in ecc development system as well ? is this the reason why I am not able to push the data to my PI system? Please tell me How can I solve this error? you any answer will be appreciated greatly
YES...you need to configure SLD check in your ECC System also
Also check the links below for proxy connectivity step by step
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?quicklink=index&overridelayout=true
Regards,
Naveen

Error while deleting the business system in SLD

HI
I am trying to delete the business system in SLD and encountering the following error .
if some one has any idea as to why is this error occuring
java.lang.NullPointerException at com.sap.sld.wd.businesssystem.BusinessSystem.removeXIIntegrationServer(BusinessSystem.java:497) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystem.removeXIIntegrationServer(InternalBusinessSystem.java:474) at com.sap.sld.wd.businesssystem.BusinessSystemMainView.RemoveOk(BusinessSystemMainView.java:450) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystemMainView.wdInvokeEventHandler(InternalBusinessSystemMainView.java:477) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:361) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:128) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:341) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:297) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:706) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:660) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:228) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanks
Nikhil

hi Nikhil,
Null pointer errors are difficult to correct as is
If you have imported the BS from some other system make sure the BS has been imported correctly without errors & any Tech systems attached to it exist.
sachin.

Error while exporting/transporting the Business system from Dev to Quality

Hi,
We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
404 Not Found
The requested resource does not exist.
Details: Go to main page of this application!
We have followed the following procedure to export :
1. opened the business system.
2. Clicked on export option
3. tried to download
then we got the above error message.
Please provide your precious inputs to resove our problem.
Thanks
Ramesh

Go through the following links for transporting XI objects.
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
ere's a good link for what you are looking.
Re: Transport design and configuration objects
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Pls reward if useful

[SOLVED] ERROR: Unable to determine the file system type of /dev/root:

:: Running Hook [udev]
:: Triggering uevents...done
Root device '804' doesn't exist.
Creating root device /dev/root with major 8 and minor 4.
error: /dev/root: No such device or address
ERROR: Unable to determine the file system type of /dev/root:
Either it contains no filesystem, an unknown filesystem,
or more than one valid file system signature was found.
Try adding
rootfstype=your_filesystem_type
to the kernelcommand line.
You are now being dropped into an emergency shell.
/bin/sh: can't access tty; job control turned off
[ramfs /]# [ 1.376738] Refined TSC clocksource calibration: 3013.000 MHz.
[ 1.376775] Switching to clocksource tsc
That's what I get when I boot my Arch system. It worked fine for quite a while, but suddenly it ran into an error where the SCSI driver module was corrupt. I fixed it by reinstalling util-linux-ng and kernel26, however, I run into this issue now. http://www.pastie.org/2163181 < Link to /var/log/pacman.log for the month of July, just in case. Yes, I bought a new ATI/AMD Radeon HD 5450 this Saturday, but it seemed to work fine till this broke and it works fine on Ubuntu too, so I suppose we can rule it out.
Last edited by SgrA (2011-07-05 20:45:36)

Autodetection failed on your first image, in both your previous kernel installs:
[2011-07-04 16:14] find: `/sys/devices': No such file or directory
Which means that sysfs was not mounted. You should be able to boot from the fallback image, which does not use autodetect. Figure out why /sys isn't mounted, as well, and fix that.
This is also a somewhat crappy bug in mkinitcpio that lets you create an autodetect image that's useless. It'll be fixed in the next version of mkinitcpio that makes it to core.
Last edited by falconindy (2011-07-04 17:41:19)

Error when reading the ID of the business system from the SLD

Hi,
I am working on a scenario JDBC - XI - BW (ABAP Proxies). I configured all the steps required to connect XI & BW systems. The SLDCHECK transaction is all green. I was able to connect to SLD from BW using SXMB_IFR tcode too. I was able to look at all the XI Repository interfaces from SPROXY tcode in BW. Created a new ABAP proxy (class interface and method) for the message interface in XI from BW (SPROXY Tcode). Created all required config in XI Directory. Got the message from JDBC adapter, mapping done successfully, and the message failed in the CALL Adapter Step.
The error is "Error when reading the ID of the business system from the SLD for system BWS and client 100."
What could have gone wrong. Thanks in advance.
Srini

Hi,
:::::::One Should Have the Following Roles AS A XI Developer With Out Admin Rights ::::::
1) SAP_XI_Developer_ABAP +
2) SAP_XI_Developer_J2EE +
3) SAP_XI_MONITOR_ABAP +
4) SAP_XI_MONITOR_J2EE +
5) SAP_SLD_ADMINISTRATOR +
6) SAP_XI_BPE_MONITOR_ABAP +
7) SAP_XI_DEMOAPP
8) SAP_XI_DISPLAY_USER_ABAP +
9) SAP_XI_DISPLAY_USER_J2EE +
Regards
Sesh

Fetching the business system name during graphical mapping

Hi,
After the receiver determination is done and in interface determination, while executing the interface mapping, i need the business system name for which the
mapping is under progress. This i need during mapping.
Also, i need the configuration scenario name during mapping.
Is there any XI internal variable/system variables which hold these values so that using user defined function they can be accessed and used in graphical mapping ?
In appreciate your input in this regard.
Regards
Ganesh

Hi,
For the configuration name you can map it with a constant and for the sender,receiver services and interfaces you nee to use the UDF as one mentioned below.
Imports com.racs.gpt.*;
public String getMapValue(String a,String b,Container container)
//String a denotes incoming data string |data1|data2|data3|...|dataN.
//String b = lookupID.
//container contains runtime parameters.
AbstractTrace trace;
String headerField;
java.util.Map map;
String result;
trace = container.getTrace();
// get constant map
map = container.getTransformationParameters();
CrossReferenceAPI maprule1 = new CrossReferenceAPI();
result = maprule1.getData(a,b,map);
trace.addWarning("result = " + result);
if (result.equals("$NULL$"))
trace.addWarning("XREF Error. Mapped data for " + a + " not found");
ErrorHandler errHandler = new ErrorHandler();
int lookupID = Integer.parseInt(b);
errHandler.logSQLError(map, lookupID, a, "");
result = "?";
return result;
Regards
Madhu

ERROR while activating the Business Content of Sales Cube 0SD_C03

Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

Logical system not updated in the business system adapter specific data par

Hello Guys,
I changed a logical system name in the sld for a business system and that that is not reflected in the Integration directory adapter specific data tab.
I did a cache refresh using :
1) sxi_cache --- Full cache refresh, delta cache refresh
2) Hard cache refresh
3) In ID "Cleared SLD data cahe "
4) Refreshed the exchange profile
But no use
Can you please tell how i can get the logical system name for the business system updated in the Integration Directory.

When you change it in SLD and if not getting replected in the ID...make sure you run the cache again, perofmr the comeplete cache....
there is an option under the adapter specific mesage attributes compare with SLD you can click that, is nthing happening after clicking it?
Run the cache in the ID are there any errors there?
check the RWB cache monitoring is everything green there?

The business system HRK_005 is not a business system in the group assigned

Hi there,
i have a Problem. I want to transport a Scenario from our Consolidation to our Prod System.
In this Szenario, there are XI and HR Systems included.
On Consolidation Side:
XIK_001
HRK_005
in Prod
XIP_001
HRP_001
When i now export the whole Scenario from our K System and want to import it to our P Systems the following error occurs:
The business system HRK_005 is not a business system in the group assigned to production.
I have no System HRK_005 in production. HRK_005 is in Group Consolidation?!?
Can someone help here?
Thanks
Bjoern

Oops i spoke with u r key code it bounced back .
Well i explained standard way to export and import Intergration Directory objects.
K - Development System ( SLD_Dev)
P - Production System (SLD _Prod)
In K - SLD_Dev needs Group -- This is based on the Integration Server (IS) of the K / P XI server.
IS (K) -- Group1 / IS (P) -- Group2 (All this in the SLD_Dev)
Assign all BS of K to Group1
Assign all BS of P tp Group2
For BS of K specify the target transport as Production BS (P).
Now goto P (SLD_Prod) create the BS as same in K what you have created in Group2
Now export from K (Dev) to P(prod)
am not able to view the link provided.
Any ways i have listed standard way for transport, hope this helps
Srini

So Can I determine the business partners linked to user based on the assigned role and org. structure?

Hello, I am working on a SAP CRM 7 Sales implementation and we are implementing leads and opportunity scenarios. The current business organization model is that there multiple vertical and horizontal departments. This is typical matrix structure. This organization has done the segregation of its clients based on the verticals so every clients belongs to at least one or more Vertical department but Horizontal departments can contact all the clients. In the same way sales executives are also either belonging to one or more Verticals or Horizontal departments? Horizontal sales executive can create leads for any clients available in the system but a Vertical sales executive can only create lead only for the client belongs to his vertical and assigned to him. This can be achieved by creating organization structure and business partner relationship.
Now the problem statement is that few sales executives need work for both some Verticals and Horizontals at the same time. But requirement is that they should be able to do the both roles with single user id but multiple roles. So when sales executive is creating leads his vertical department, he should only be able to select clients assigned to his Vertical only but when he is creating lead for Horizontal department, he should be able to select any clients.
So Can I determine the business partners linked to user based on the assigned role and org. structure?
Please let me know if this is not clear also note we are only using CRM WebUI no SAP ePortal.
Thanks a lot your help in advance.
Regards
Sudesh Sharma

Thanks, Tahir
my problem has solved
Kind Regards,
Faisal

General XI Connectivity activities in the business system to connect to XI

Hi,
Is there any general/common XI connectivity activities/configuration to be done for a business systems (both SAP and Non-SAP) to preparfe it to able to talk to SAP XI ? Is there any mandatory tasks (sort of a checklist) to make a business system to be able to integrate it with SAP XI (apart from specific configuration).
The SAP XI Master guide talks about XI Connectivity add-on client to be installed in the business system. I am not understanding as to what does that mean. For Example, if i want to integrate SAP SRM business system to SAP XI, what are the minimum XI connectivity related activites to be done on the SAP SRM system.
I appreciate your input in this regard.
Regards
Ganesh

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

Not able to see the Business systems

Dear Experts,
Thanks for you support and help.
I have created as per the below sequence for both sender and receiver types wherever necessary
1. Software Product
2. Software Component -
3.Technical System - (Third party )
4. Business system (Sender and Receiver)
http://wiki.sdn.sap.com/wiki/display/XI/CopyofFLATFILETOFLATFILE
imported the software compnent in IR and created Data Types, Message types etc and tested, it is working good.
I have created a Configuration Scenario, and tried to assign the business system in "Service Without Party", i was not able to see both the sender and receiver Business Systems which were already created and getting an error : service :Business systems not found
Do i need to change anything while creating Product, SW Component, Third Party Technical System and Busniess System..etc
Regards
Blue

Hi,
I think u r bussiness system is alredy assign to other scenario.If u assigned once it will not show in the list.U have to import the bussiness system not assign.In ID select 'Objects' it will show all the Bussiness system details.Selet u r business system and add to u r scenario.
Also refesh cache objects using SXI_CACHE and refesh obeject in ID.
In ID Go to ENVIRONMENT->select Clear SLD Cache
Then refresh the all objects.
Thanks
Ravi

Interface getting failed after changing the Business system to that service

Hello All,
Our Env... is XI 3.0 and this is related to produciton env.
Based on our client requirment to change the business system from client 871 to 100 for one of the R3 system which is reciever type(rfc).
After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in the system.
The steps which I have followed to change the Business system.
1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
Then i saved the changes and after that i have activated that interface.
After that when i logged into CC monitoring and viewed that service channels and see the following errors:
Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
Awaiting for your reply.
Best Regards
Rakesh Reddy

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

Error in Determining the Business System??

Similar Messages

Maybe you are looking for