Error in Device Registery

hi
when i  deploying work flow i got the error " Unable to invoke the admin service GetWorkFlowList:  ADMIN_WEBSERVICE_INVOCATION_ERROR:fail to invok"
Also I have check Sybase Control Center also problem for Device Registration also.I got there "an internal error occurred in  server "
pls help me for that ........!!!!

jprashant111 wrote:
Actually when i was check the logs (on Sybase Control Center) it shows
>
> "ERROR Other Thread-323 [javax.xml.messaging.saaj.client.p2p]SAAJ0009: Message send failed"
> I cant understand how to register device there..............
>
> i also have problem for deployment of worflow .I got there an error "Unable to deploy ADMIN_WEBSERVICE_INVOCATION_ERROR:fail to invoke web service of messaging server"
>
>
> help me please!!!!
For registering devices there are numerous articles on the sybase websites plus many entries in these forums regarding troubleshooting and initial registration.
For the problem with the workflow deployment - This message may indicate that an Unwired Server administrative component is not running.  You might find the solution to your issue by the instructions here:  [ Error in Listing Devices and ADMIN_WEBSERVICE_INVOCATION_ERROR in Agent.log|http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01206.0155/doc/html/mqu1258931945133.html]

Similar Messages

  • Can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

    can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • Error publishing from Muse - "error updating device redirect setting"

    After recent upgrade of Muse I am getting an error message when publishing. The pages are published correctly but there is an error which prevents the final completion of the process. message = "Error updating device redirect settings click resume to try again." it never works. What is up? is this a Business Catalyst error or a a Muse error?

    I turned off the firewall, logged out from Creative Cloud and restarted my computer. After rebooting, I logged in to Creative Cloud, open Muse and connect to Business Catalyst without no problem,

  • Iphone 5- Won't show up in itunes. Error message " Device drivr software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

    Error message  " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

    Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
    I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
    I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
    Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
    Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
    Thanks!

  • Audio Stream Recorder - Error: Audio device is already being used by another prog

    I realized that Audio Stream Recorder is does not "work" through server list feature. So I am simply trying to use the manual method of adding URL's to the interface. However regardless of the type of stream, shoutcast, windows media or real audio, I receive the error "audio device is already being used by another program". Does anyone know how to fix this? I have closed my audio application etc to no avail. <RANT WARNING> I was very excited about using this application when I read about it. However an application that provides none of the stated features is not an application, its false advertising, since it clearly states on the box, help files and website this products "features". Anyway, it'ss very disappointing. Also, does anyone know what the supported steaming formats are, the help file say the application requires RealONE and Windows Media Player but does not mention audio stream formats? Thanks you in advance for any help.

    I have the same issue. I updated to the latest software, to no avail. My first suspicion is that some Microsoft patch caused this, but I cannot verify this.
    Apparently no one at Creative is very interested in this issue.

  • U530 Touch - Audio DRIVER ERROR - This device cannot start (Code 10) - Windows 7

    U530 - High definition audio device - ERROR - This device cannot start (Code 10) Windows 7, please see the picture
    Picture link (hosted on photobucket.com)
    I got all drivers up to date including the BIOS, everything is working fine (the sound works, microphone works...) but this error is kind of annoying to my eyes so if anyone know how to fix it please help.
    I tried to uninstall this and let windows update install it again => not worked, same problem.
    I tried to re-install the Realtek driver (uninstall - restart machine - install - restart machine) => same problem
    And another probelm which has not been solved yet is the Bluetooth icon keep blinking on battery mode (windows 7), you can see more in this thread

    What kind of reinmstall did you perform?  If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed.  Your list will be different than the following one, but this is only an example. 

  • My Iphone 4 will not start up, when i connect it to itunes i says : Activation error This device is not registered as part of the iPhone Developer Program.If you are a member of the Program, please register your device in the iPhone Developer Program Port

    my Iphone 4 will not start up, when i connect it to itunes i says : Activation error This device is not registered as part of the iPhone Developer Program.If you are a member of the Program, please register your device in the iPhone Developer Program Port

    Well, you downloaded a bootleg copy of iOS 7 beta and have installed it on your phone without being a developer. It has bricked your phone and you cannot get help here because doing what you did has voided your warranty. Have a nice day.

  • I'm receiving error Boot Device Not Found and Hard disk not exist when I boot up my laptop

    I'm receicing the error Boot Device Not Found when i power on my HP G60-235DX laptop.  After following HP's recommended troubleshooting steps, I receive error Hard disk not exist.  Hmmmm....that's a little concerning.  My guess is I need a new hard drive?    I have the 17 recovery disks I made when I setup this laptop, however I'm not sure if they will resolve this issue.  Any suggestions?

    One of 3 things has happened, listed from most likely to least likely
    1. Hard drive has died, replace it with one of the same size or larger, then use the HP recovery discs to re-install windows.
    2, The motherboard has serious problems. (Replace the notebook)
    3. The hard drive cable that connects it to the motherboard has somehow failed, not very likely. (replace the cable)
    Replace the hard drive with a new one and use your recovery discs to get Windows back on it.
    Here is your service manual, will show you how to replace the hard drive
    http://h10032.www1.hp.com/ctg/Manual/c02985882.pdf
    Recovery Instructions for Vista
    Recovery Instructions for Windows 7

  • Install from SCSI CD fails: ERROR: boot device didn't show up after 30

    I have a x86 based server w/SCSI HD and DVD drive. 
    Install fails with following.
    Waiting 30 seconds for device /dev/disk/by-label/ARCH_201108
    ERROR: boot device didn't show up after 30 seconds
       Falling back to interactive prompt
       You can try to fix the problem manually, logout when you are finished
    sh: can't access tty; job contro turned off
    [ramfs /]#
    I hooked up a IDE DVD drive and using same CD installs OK.  Then, once installed, I switch my DVD back to SCSI that failed the install, and guess what?  Arch booted from my HD now recognizes the SCSI DVD drive, I can mount it and so on.  Looks to me like the install kernel doesn't support my SCSI DVD drive but the installed kernel does.
    I need the Arch install to work from the SCSI DVD drive on my system.  I'm trying to develop an Arch distro for my particular system, which there are about a dozen of in the field, they all have SCSI DVD and no IDE drives.  Will I have to add a SCSI driver to the boot kernel?  Or is my problem something else?
    I notice there is no /dev/disk/by-label (ther is a /dev/disk/by-id  by-label  and by-uuid).
    I do a:
    "[ramfs /]# lsmod | grep sr_mod"
    sr_mod        14951   0
    cdrom        36329   1   sr_mod
    scsi_mod    131482   7  sg,sr_mod,sd_mod,libata,mptspi,mptscsih,scsi_transport_spi
    [ramfs /]# lsmod | grep scsi
    mptscsih        20040   1   mptspi
    mptbase            63459    2   mptspi,pmtscsih
    scsi_transport_spi    20059   1   mptspi
    scsi_mod        131482  7   sg,sr_mod,sd_mod,libata,mptspi,mptscsih,scsi_stransport_spi

    scrath "I notice there is no /dev/disk/by-label (ther is a /dev/disk/by-id  by-label  and by-uuid)."
    Should be: I notice there is no /dev/disk/by-label (there is a /dev/disk/by-id  by-path  and by-uuid).

  • RMAN Delete Obsolete job fails due to Error Allocating Device

    Experts, I need help, please.
    This is 10.2.0.1 on Windows
    RMAN> DELETE NOPROMPT OBSOLETE;
    RMAN retention policy will be applied to the command
    RMAN retention policy is set to recovery window of 3 days
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=130 devtype=DISK
    released channel: ORA_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of delete command at 05/15/2012 14:10:17
    ORA-19554: error allocating device, device type: SBT_TAPE, device name:
    ORA-27211: Failed to load Media Management Library
    I ran RMAN> configure device type 'SBT_TAPE' clear;
    but I still get the same error.
    I backup to Disk, not tape
    Notice the reference to SBT_TAPE:
    RMAN configuration parameters are:
    CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO BACKUPSET PARALLELISM 1;
    CONFIGURE DEVICE TYPE SBT_TAPE PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
    What do I need to do to be able to run DELETE OBSOLETE; ?
    Thanks, John

    as anand mention ,you've to reset this parameter to default value.
    and clear cmd with configure will remove it from configuration parameter
    see below
    RMAN> show all;
    RMAN configuration parameters are:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
    CONFIGURE BACKUP OPTIMIZATION OFF; # default
    CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
    CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # default
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
    *CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 1 BACKUP TYPE TO BACKUPSET;*
    CONFIGURE DEVICE TYPE DISK PARALLELISM 2 BACKUP TYPE TO BACKUPSET;
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/10/db/dbs/snapcf_GG1.f'; # default
    RMAN> delete obsolete;
    RMAN retention policy will be applied to the command
    RMAN retention policy is set to redundancy 1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of delete command at 05/16/2012 12:04:34
    ORA-19554: error allocating device, device type: SBT_TAPE, device name:
    ORA-27211: Failed to load Media Management Library
    Additional information: 2
    RMAN>  CONFIGURE DEVICE TYPE 'SBT_TAPE' clear;
    old RMAN configuration parameters:
    CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
    RMAN configuration parameters are successfully reset to default value
    RMAN> show all;
    RMAN configuration parameters are:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
    CONFIGURE BACKUP OPTIMIZATION OFF; # default
    CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
    CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
    CONFIGURE DEVICE TYPE DISK PARALLELISM 2 BACKUP TYPE TO BACKUPSET;
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/10/db/dbs/snapcf_GG1.f'; # default
    RMAN> delete obsolete;
    RMAN retention policy will be applied to the command
    RMAN retention policy is set to redundancy 1
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=1591 instance=GG1 devtype=DISK
    allocated channel: ORA_DISK_2
    channel ORA_DISK_2: sid=1627 instance=GG1 devtype=DISK
    no obsolete backups found

  • DVD Burning Error: Unknown device error. (0x73, 0x03.)

    I have been trying to burn a home movie using iDVD. I transferred the media successfully to my computer, followed all the steps, and was finally ready to burn the DVD. After waiting almost an hour through the burn process, it spit the DVD back out of my Macbook Pro and gave me the following message.
    *Errors were found during the burning process:*
    *The recording device reported the media error: Unknown device error. (0x73, 0x03.)*
    I don't really know what this means. Was the media corrupt? Or is there a problem with my DVD player? I have supplied my DVD and computer information below. I would appreciate all the help I can get. Thank you in advance!
    Courtney
    *MATSHITA DVD-R UJ-857D:*
    Firmware Revision: KCVB
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: Insert media and refresh to show available burn speeds
    *Hardware Overview:*
    Model Name: MacBook Pro 15"
    Model Identifier: MacBookPro2,2
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.16 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 1 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP22.00A5.B07
    SMC Version (system): 1.12f5

    Using the same media I've used for years (Verbatim 4x InkJet printable) and all of a sudden can't burn from the internal drive. I do have an external burner (7 disc standalone replicator with USB/FireWire 400) and hooked that up and burned to a disc from the same spindle with no problem, and then made a 3x replicate with the same media. So it's looking like my MacBook Pro's drive is failing?
    Laptop is plugged in and fully charged.
    DVD Studio Pro: Burn started, Fri Oct 23 22:42:55 2009
    DVD Studio Pro: Burning to DVD-R (MCC 01RG20) media with DAO strategy in MATSHITA DVD-R UJ-857E ZA0E via ATAPI.
    DVD Studio Pro: Requested burn speed was 4x, actual burn speed is 4x.
    DVD Studio Pro: Burn underrun protection is supported, and enabled.
    DVD Studio Pro: Write (10), block: 0, count: 64 -> 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn failed, Fri Oct 23 22:44:13 2009
    DVD Studio Pro: Burn sense: 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.
    DVD Studio Pro: Burn started, Fri Oct 23 22:55:50 2009
    DVD Studio Pro: Burning to DVD-R (MCC 01RG20) media with DAO strategy in MATSHITA DVD-R UJ-857E ZA0E via ATAPI.
    DVD Studio Pro: Requested burn speed was 4x, actual burn speed is 4x.
    DVD Studio Pro: Burn underrun protection is supported, and enabled.
    DVD Studio Pro: Write (10), block: 0, count: 64 -> 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn failed, Fri Oct 23 22:57:08 2009
    DVD Studio Pro: Burn sense: 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.

  • The recording device reported the media error: Unknown device error. (0x0C,

    Hello
    I have a problem making a DUAL LAYER DVD, i have done anothers before. But now I can't burn it.
    It's a message error.
    (The recording device reported the media error: Unknown device error. (0x0C, 0x00.))
    Next this my Mac configuration.
    Model Name: Mac Pro
    Model Identifier: MacPro3,1
    Processor Name: Quad-Core Intel Xeon
    Processor Speed: 3.2 GHz
    Number Of Processors: 2
    Total Number Of Cores: 8
    L2 Cache (per processor): 12 MB
    Memory: 6 GB
    I have DVD STUDIO PRO 4.2.1, and in the log appears this:
    Starting DVD Build UNTITLED_DISC...
    Compiler Initializing...
    Precompiling Project UNTITLED_DISC
    Compiling VMG Information...
    Created 6 PGCs in VTSM1
    Created 8 PGCs in VMG.
    0 Menu(s) will be created...
    Compiling Menu PGCs...
    Writing VTS010.VOB
    Writing VIDEO_TS.VOB
    1 VTSs and 1 Titles will be created...
    Compiling VTS#1 (Track 1)...
    Writing VTS010.VOB
    Muxing VTS011.VOB
    Done.
    Linking VMG...
    Linking VTS#1...
    Writing VTS#1...
    Writing VMG...
    Writing Layout Info...
    Compile Completed Successfully
    Note: The file ‘UNTITLED_DISC.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    Start formatting
    Formatting as Standard DVD
    Simulation mode is off
    Lossless linking is on
    Number of layers is 2
    Doing opposite track path
    Setting layer switch at sector 2053488.
    Doing side 1 of 1
    Playable in region 1,2,3,4,5,6,8
    Disc size is 12 cm
    Disc has no copyright material
    Writing ISO 9660 directories
    Writing UDF 1.02 structures
    Writing files
    The recording device reported the media error: Unknown device error. (0x0C, 0x00.)
    What should be the problem?

    There could be a few reasons, a common one is bad DVDs or a burner going bad.
    [Some threads discussing the error|http://discussions.apple.com/search.jspa?threadID=&q=Therecording+device+reported+the+media+error%3A+Unknown+device+error.+(0x0C%2C0x00.)&objID=f952&dateRange=all&userID=&numResults=15]
    You can try the [arrpoach in this thread|http://discussions.apple.com/thread.jspa?messageID=2453295&#2453295] as s start.
    Take a look at this
    Not sure which brand of DVDs you are using, but [this guide rates brands|http://www.digitalfaq.com/reviews/dvd-media.htm]
    Verbatim are usually good for me for DL.

  • Im trying to update my rarz m running 4.1.2 but i recevie an error Your Device is up to date! No update is necessary at this time"

    im trying to update my rarz m running 4.1.2 but i recevie an error Your Device is up to date! No update is necessary at this time"
    what can i do??

    Im on WiFi , this is not my first time updating One RAZR M XT907, im sure
    that this update is posible, the cel phone is 100% stock without any app
    installed
    El sep 21, 2014 4:33 PM, "Verizon Wireless Customer Support" <
    [email protected]> escribió:
           <https://community.verizonwireless.com>
    A message from the Verizon Wireless Community
    <https://community.verizonwireless.com>
    <https://www.verizonwireless.com/wcms/consumer/explore.html>  [image:
    SHOP] <http://www.verizonwireless.com/wcms/consumer/shop.html>  [image:
    MY VERIZON] <http://www.verizonwireless.com/b2c/myverizonlp/>  [image:
    SUPPORT] <http://www.verizonwireless.com/support/>
       im trying to update my rarz m running 4.1.2 but i recevie an error
    Your Device is up to date! No update is necessary at this time"  created
    by Verizon Wireless Customer Support
    <https://community.verizonwireless.com/people/vzw_customer_support> in
    Android - View the full discussion
    <https://community.verizonwireless.com/message/1145184#1145184>

  • Connecting my ipad mini to my camera using the USB camera kit error message 'device is to powerful' keeps popping up.

    I am trying to connect my iPad mini to my Samsung camera using the USB camera kit, I keep getting the error message ' device to powerful'. Is there anyway to fix this or do I need to take it back?? The shop assistant in Currys assured me it should work and it wasn't cheap at £25 for a tiny wire! I have read other posts concerning this but they are dated quite a while ago so just wondered what the newest advice was concerning this. Thanks

    The camera is drawing too much power for your iPad. This can happen on cameras which charge their batteries using the USB connection. Make sure that you have the camera set to the correct settings for picture transfer - check the documentation that came with the camera.
    Note that you can return the USB kit and get the SD card adaptor or get a powered USB hub if you can't get the camera to work any other way.

  • Error initializing server: IO Error: The device is not ready

    Hi, I copied JDev 10.1.3 on my notebook and when I tried to start embedded OC4J I get the following message:
    Error initializing server: IO Error: The device is not ready
    What should I do? Thanks

    If I read correctly, you just copy the existing jdev installation on your PC to your notebook. That sounds like a very dubious practice to me. As seen by you in this particular example, hard-coded non-relative paths, host information, environment settings and etc begin to creep into various configuration or preference files once a piece of software go alive.
    Any problem to start a new installation to your notebook?

Maybe you are looking for