Error in displaying fonts when framemaker file is converted into PDF

I have used HELVETICA NEAUE font in my FM files. When I save these files as PDF, the font displayed in PDF is ARIAL. Although I have HELVETICA NEAUE font in our OS (Control Panel>Fonts), why the wront font is displayed in PDF?

It sounds like Distiller does not know where the Helvetica Neue font is located. In Distiller, check the font locations in Settings > Font Locations.

Similar Messages

  • Some CGM graphics do not appear when FrameMaker files are converted to PDF

    CGM files are exported from ISO (Arbortext Isodraw 7.0 CadProcess) files. Then they are imported into Adobe FrameMaker 7.2, where all elements of the illustration are visible and can be printed. The FrameMaker FM file is converted to a PDF file using the Adobe PDF converter function of Frame. When the PDF file is opened by Adobe Acrobat 8,0 Professional, some, but not all of the illustrations in the file exhibit this problem (The callouts and other text may appear, but the lines, curves, etc. do not). The illustration prints the same way it appears on the screen. When exporting the ISO file as a CGM, the following selections are made.
    When importing file into Frame, "Import by Reference" is selected.
    When creating PDF in Frame, the following selections are made.
    Any Suggestions would be greatly appreciated. Thanks very much.

    Thanks, Michael.
    I will give it a try.
    Avox Systems Web Site: http://www.avoxsys.com
    AVOX SYSTEMS
    AIRCRAFT SYSTEMS
    Rick Barusic
    Senior Technical Writer
    225 Erie Street - Lancaster, NY 14086 - USA
    Tel: 716-686-1706
    [email protected]
    http://www.zodiacaerospace.com
    The information transmitted is intended only for the person or entity to
    which it is addressed and may contain confidential and/or privileged
    material. Any review, retransmission, dissemination, or other use of or
    taking any action in reliance upon this information by persons or entities
    other than the intended recipient is prohibited. If you received this in
    error, please contact the sender and delete the material from any
    computer.
    From:   MichaelKazlow <[email protected]>
    To:     rick barusic <[email protected]>
    Date:   11/24/2010 10:32 PM
    Subject:        Some CGM graphics do not appear when
    FrameMakerfiles are converted to PDF
    First you should update to the latest version of Acrobat 8, since you say
    you are running Acrobat 8, you should update to 8.2.5. Update your
    FrameMaker to 7.2p158. Those two steps might do the trick. If that fails
    try using a different settings file. Perhaps High Quality or Press
    Quality. I would never use Standard for anything where fidelity is
    important.

  • Error in Cs3 extended when opening files.

    hello Guys,
    when I open a file i get the error
    ADOBE Photoshop CS3 Extended:Photoshop.exe - teopassingsfout ( dutch for application error)
    The pc is member of a domain. I installed the legal software on users account with administrative privileges.
    Start the program without error untill opening a file.
    Does anyone has a solution for that please?

    Do you get an error when opening files from Bridge into Photoshop?
    Does the same happen when you open Raw files with Camera Raw?

  • Receiving Error "Exception Occurred !" when attaching files to Test Manager

    We are receiving the error "Exception Occurred!" when attaching files to Test Manager under issues.
    Error Message:
    +"Exception Occurred !"+
    No Permission to perform this action
    I'm not sure if this is a permission issue or not on our end.
    Here are the log entries from the debug and server logs.
    Error Message from debugweb_07_16_09.log file:
    +11:57:02:523 - TMJava addAttachment(): Unknwon exception thrown - avoiding program exit during save attachment of Issue node '42'+
    Error Message from server.log file:
    +2009-07-16 11:57:02,523 INFO [STDOUT] oracle.oats.otm.util.TMException+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at oracle.oats.otm.web.util.AttachmentAction.addAttachment(Unknown Source)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at java.lang.reflect.Method.invoke(Unknown Source)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at oracle.oats.otm.web.OracleActionBase.execute(Unknown Source)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at oracle.oats.otm.web.ActionServlet.process(Unknown Source)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at oracle.oats.otm.util.RequestEncodingFilter.doFilter(Unknown Source)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:39)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:153)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:59)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.jboss.web.tomcat.tc5.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:138)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:744)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)+
    +2009-07-16 11:57:02,523 INFO [STDOUT]      at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)+
    +2009-07-16 11:57:02,601 INFO [STDOUT]      at java.lang.Thread.run(Unknown Source)+
    +2009-07-16 11:57:02,601 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: Forward Name = failure, Path =/jsp/Exception.jsp+
    +2009-07-16 12:05:32,926 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: --Action=/displayAttachment.do: AttachmentAction.displayAttachment()+
    +2009-07-16 12:05:33,082 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: Forward Name = success, Path =/jsp/AttachmentForm.jsp+
    +2009-07-16 12:05:34,645 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: --Action=/displayUploadAttachment.do: AttachmentAction.displayUploadAttachment()+
    +2009-07-16 12:05:34,645 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: Forward Name = success, Path =/jsp/UploadFileForm.jsp+
    +2009-07-16 12:05:53,067 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: --Action=/addAttachment.do: AttachmentAction.addAttachment()+
    +2009-07-16 12:05:53,067 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: File NameC:\Documents and Settings\dfitzgerald\Desktop\TestErrorPleaseDelete.jpg+
    +2009-07-16 12:05:53,067 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: File size12683+
    +2009-07-16 12:05:53,208 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: nodeId returned : -1+
    +2009-07-16 12:05:53,208 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[otm]] action: null+

    Alex,
    We're using SQL Server and OTM 8.50.0233.
    I've tried uploading jpg and bmp images.
    Thanks

  • I just purchased the ExportPDF. When I try to convert a pdf document to word online, it gives me an error. What is the problem?

    I just purchased the ExportPDF. When I try to convert a pdf document to word online, it gives me an error. What is the problem?

    Hi sampa1,
    Can you please let us know the error message you are getting while converting PDF to Word. Also, please let us know the steps you are following.

  • When I try to convert my .pdf to Word, I get a sidebar that has fields for: the name of my pdf file, the type of file I want to convert to (In my case, Word), and a button that says "Convert".  My problem is that the "convert to" field isn't active.  I ca

    When I try to convert my .pdf to Word, I get a sidebar that has fields for: the name of my pdf file, the type of file I want to convert to (In my case, Word), and a button that says "Convert".  My problem is that the "convert to" field isn't active.  I can see the words "Microsoft Word" in pale gray, but when I click on the field, nothing happens.

    You have posted in the wrong forum.  Try posting in the forum for the product you are trying to use.
    Here is a link to a page that has links to all Adobe forums... use the drop down list to see all.
    Forum links page:
    https://forums.adobe.com/welcome

  • How can I convert .pdf file to .doc using the free adobe reader app? when I try to convert the .pdf file it asks me to sign in. when I click on "sign in", I am taken to a service subscription page. So, no free conversions using free adobe reader app?

    how can I convert .pdf file to .doc using the free adobe reader app? when I try to convert the .pdf file it asks me to sign in. when I click on "sign in", I am taken to a service subscription page. So, no free conversions using free adobe reader app?

    As has been mentioned Adobe Reader cannot export PDF page content. Nor can it create PDF or manipulate PDF page content.
    What you can do is use one of Adobe's online subscription services. Two provide for PDF  to Word export.
    There's ExportPDF and PDF Pack.
    Be well...

  • When i try to convert from PDF to word it says "an error occurred while trying to access the system". I've paid for this what is going on?!

    When i try to convert from PDF to word it says "an error occurred while trying to access the system". I've paid for this what is going on?!

    Hi,
    I have the same problem. Here is the screenshot of the error and I am using Windows 7 and Adobe Reader XI version 11.0.10.

  • Why do I get prompted to subscribe online when I attempt to convert a PDF file to word

    Why do i get prompted to subscribe online when I attempt to convert a PDF file to word?  It's Adobe Pro XI.

    Open pdf document,  click tools,  click content editing,  click export file to (choose word).   Or open pdf document and choose save as.  Either way it prompts to subscribe.

  • Distiller will suddenly close/crash the *SECOND* time I open a file for converting to PDF.

    The subject heading says it all: Distiller will suddenly close/crash the *SECOND* time I open a file for converting to PDF.
    But I think I have a clue why this is happening. Typically, I use Distiller to convert EPS or PS files into PDFs. Also, almost without fail, I embed the required fonts (exclusively Type 1) directly into the EPS/PS files (using the required PFA format) so no local fonts on my computer are needed to be looked for by Distiller to be embedded in the resulting PDF; they're already in the EPS/PS files.
    But yesterday, I attempted to convert some EPS/PS files to PDFs using Distiller in which I had NOT embedded the Type 1 fonts (in PFA format, of course) in the source EPS/PS files. The first such conversion would work (in which I select "Open" and choose an EPS/PS file for conversion), but after that initial conversion, the *SECOND* time I clicked on "Open" (open file), Distiller would immediately close/crash.
    I then searched the web for answers, and discovered some people were having trouble getting Distiller to initialize if any of their computer system fonts were read-only. So, I went back to my EPS/PS files and embedded the required Type 1 (PFA format) fonts into them, and then—magically—Distiller worked without a hitch: I could open and convert any number of them in succession, with Distiller never closing/crashing.
    So, I concluded the reason that Distiller had been crashing upon the second attempted opening of a file (again, simply by pressing the "open" button to search for a file to convert, *not* after selecting a file) must have had something to do with Distiller scanning my computer's installed fonts when there was no embedded PFA font to reference, and a read-only font on my system was causing the problem. However, I looked in the two logical places where my fonts should be located (c:\psfonts and c:\windows\fonts), but found *no* font files' attributes set to "read-only" So, I'm stumped.
    I'm using Distiller Pro 10.1.1316 (acrodist.exe) on a Win 8.1 machine. I've found similar posts, going back to 2004, about Distiller immediately crashing after opening when some fonts are read-only; I haven't yet found a post about anyone successfully using Distiller to convert one EPS or PS file to PDF, and then having the program crash when the "Open" button is pressed subsequently. Any clues, anyone?

    Never heard about the crash and that does not sound normal. Be sure to do the updates to Acrobat in case that resolves the issue. You might also check the font settings in the settings file and check to ignore the error if the font can not be embedded and Distiller should use what it considers to be the closest system font.

  • Mangal Fonts and Tunga Fonts in (MS Home and Student 2010) Word 2010 not getting converted into PDF

    Why do I get a totally blank PDF file whenever I try to convert any (Microsoft Office Home and Student 2010, Version: 14.0.6029.1000) Word document file containing either Mangal Fonts (Hindi) and Tunga Fonts (Kannada) into a PDF file (by using Adobe Acrobat X Standard - English, Version: 10.1.4, Program File Size: 1790 MB, Complete/Full Version) after formatting and reinstalling all the necessary software / softwares (Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3 and Windows XP Service Pack 3, Version: 20080414-031525, Program File Size: 9.08 MB)?
    I'm using
    01) Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3
    02) Computer: Intel(R) Pentium(R) 4 CPU 3.00 GHz 3.00 GHz, 504 MB of RAM
    03) Windows XP Service Pack 3, Version: 20080414-031525, Program File Size: 9.08 MB
    04) Microsoft Office Home and Student 2010, Version: 14.0.6029.1000, Product ID: 82503-388-0792296-26607, Program File Size: 490 MB
    05) Adobe Acrobat X Standard - English, Version: 10.1.4, Program File Size: 1790.00 MB, Complete/Full/All Version/Features has/have been installed
    06) Windows Internet Explorer 8, Version: 20090308.140743, Program File Size: 4.20 MB
    Any Word 2010 document file that has been converted into any PDF File unfortunately does not show either the Mangal (Hindi) Fonts or the Tunga (Kannada) Fonts.
    The PDF file will unfortunately become/remain totally/fully/completely blank.
    When I convert an Excel Workbook having the Tunga Fonts (Kannada) to/into a PDF File, some of the Tunga fonts in the PDF file are legible and some are unfortunately illegible (get superimposed / overwritten on each other).
    Perhaps I may get the same result if I try to convert an Excel Workbook having the Mangal Fonts (Hindi) to/into a PDF File with some Mangal fonts being/becoming legible and the rest being/becoming illegible (getting superimposed / overwritten on each other).
    Tanveer
    Syed Tanveeruddin, Karnataka, India
    Message was edited by: tanveerindian
    Message was edited by: tanveerindian
    Message was edited by: tanveerindian

    My chronological sequence of steps to create a Word 2010 Document or an Excel 2010 Workbook:
    I first create a Word Document File or an Excel Workbook File and save it by giving an appropriate file name.
    Then I right click on the closed Word Document File or the Excel Workbook File in the file folder and convert it into a PDF by retaining the same/original file name.
    The font list of Microsoft Word 2010 claims/says/states that both Mangal and Tunga are True Type fonts and also that these fonts will/would be used on both printer and screen.
    In case if there is any text content in English in the beginning it will get converted into PDF only till/until either a Mangal(Hindi)/Tunga(Kannada) Font starts.
    The remaining English text content does not get converted into/to PDF the moment a Mangal(Hindi)/Tunga(Kannada) Font starts. If the entire matter is purely (100 per cent) in English text it will fully / completely / totally get converted into a PDF file without any problem.
    Message was edited by: tanveerindian

  • My goal: "convert into pdf" -- the file is instantly saved with the same name as pdf. feasible?

    Good evening dear experts,
    i use Adobe Acrobat 9 pro extend to convert word, ppt, jepgs etc. into pdfs.
    No if i
    1) convert a ppt into a pdf: it asks --> "save as" --> converts --> opens the file
    2) convert a jpeg into a pdf: it instantly --> opens the file as pdf --> i need to save it manual under "save as"
    In both cases i want to
    my goal: "convert into pdf" --> the file is instantly saved with the same name as pdf
    WITHOUT asking me "save as" + "opening of the file".
    Is the possible, and if yes, HOW ?
    A fast answer is very very much appreciated, for i have to convert hundreds of files tonight in order to get it into 1 pdf
    Thx and greetings from Germany,
    Julia

    We are nearly there!
    A] - righclick "convert-to-method": @Bill: thx again, your approach worked for ppt, doc-files etc.
    2 problems:
    1) exception: for jpegs/bmps it doesn't work (the file is still opened after conversion, strange).
    2) the output-folder. it only accepts the standard "output-folder documents/*.pdf" (which is a step further but not my end-goal). If i choose another output-folder via "browse", this setting is NOT SAVED (even after clicking on "accept" + "ok").
    my goal: the the file should be automatically saved in THE SAME folder the original file is in (seems that can't be achieved and the standard folder is the only thing where to convert in?).
    Personal background for understanding: i have many folders with several ppts in it. Once i send it out to a customer, i always have to convert it into a pdf. thats why i want to save time (i know that i can convert it directly + send per mail, but i want an up-to-date copy of the pdf in the folder as well).
    B] - "the automated solution"- @Sandeep:
    i just watched your link http://tv.adobe.com/watch/acrobat-tips-and-tricks/automating-tasks-in-acrobat/
    about batch processing and i think its really helpful if i want to convert ALL of the files in one folder.
    1 question regarding this: are the subfolders also affected?
    As i understood from the video, i choose 1 "watched folder" and a "destination folder" (can be the same). E.g i have 1 big folder "designs" with many subfolders. I create a batch converting ppts to pdf to "the same folder" Once i run my batch, it converts ppts in the chosen folder "designs" + all subfolders into the same folder, right?
    If this is the case, i get too many pdfs, for i only need the latest ppt-version to be converted (copies of old ppts are also in the files) ;(.
    Do you have an idea how can i solve this?
    Now we are very near to the end-solution of my goal:
    i need this option "to the same folder" in my general settings when i convert a file via right-click. ATM it only works with the standard-folder documents/*.pdf
    In A], my files are now instantly saved with the same name in 1 specific folder. I would be completely happy, if this folder would be alwys the same as the one with the original file (and not 1 specific folder)
    2nd problem with a]: it does not apply to picture files (bmp, jpegs..)
    So if we could solve this, i would be a completely happy girl
    Guys, you are great, thx again for the whole struggle with my concerns!!

  • Keeps saying a problem occured when I want to convert my PDF to DOC

    Keeps saying a problem occured when I want to convert my PDF to DOC

    Good day,
    Sorry to hear about the trouble you're having. Could you send us a copy of the file which isn't converting correctly via our File Conversion Issue Form? In the form, please include a link to this forum post. We'll try to take a look at it for you and hopefully we can figure out what's going on.
    Kind regards,
    David
    Acrobat Community Manager
    Adobe Systems

  • Why isn't the color identical when PM document is converted to PDF?

    Hello all,
    I am using PageMaker 7.  I have made a graphic file (TIFF) which has a background RGB color of full red (255, 0, 0).  I have placed it into a PageMaker document.  To increase the background area around the graphic with an identical red background that will cover the entire page, I added a large box shape and filled it with PageMaker's RGB color red (also 255, 0, 0).
    So far so good - in PageMaker both colors look identical on my laptop screen, and look identical to the original color in the graphic file.  you can't tell where the graphic file and the large background box behind it are meeting.  However, on converting the PM document to a PDF file, the PageMaker red color looks distinctly darker on the screen than the red in the graphic file, when viewed in the PDF file.  I have tried lightening the PageMaker red in various ways by altering the RGB settings, but still cannot get an identical match of reds in the PDF file.  I don't wish to darken the red color in the graphic file.
    The only solution I can think of is to go back to the graphic file and increase its area so that its red color will fill the entire page when placed into PageMaker.
    Is there another way?
    Thanks,
    Roger3

    Hi,
    Thanks for your reply.  No, I haven't converted any color images from RGB to CYMK.  The original graphic file was made as RGB.  The colored box in PM7 is set to the Color Options of:
    Type: Spot
    Model: RGB
    (R 255, G 0, B 0)
    As said, in PM7 the two red objects look identical in colour tinting etc on the screen, and you can't tell the difference.  But when the doc is converted to PDF the difference is obvious.
    After posting to this forum last night (Australian time), I wondered if it had something to do with dot resolution.  The graphic file is 300 dpi, whereas the red PM box is filled with color that may be at a much lower DPI, causing a dullness in the color.  I assume the PM 7 default for this can't be altered. Maybe there is a setting in Distiller that could handle this, so that the colors are equalised.
    The solution I'm currently using is to remove the box (or oblong) containing PM's RGB Red, then make another graphic file which is RGB Red (either at 300 dpi or 200 dpi, either TIFF or JPG, it doesn't matter), of the same page size as the PM doc, then place it onto the page and send it to the back so that everything else sits on top of it.  When converted to PDF you now can't tell the difference between the RGB Red in both graphics.
    I'm happy with the result, but it's a workaround.
    Thanks,
    Roger3

  • When i try to convert a pdf to a word document it says conversion failure

    When i try to convert a pdf to a word document it says conversion failure.  What should i do?

    Hi David,
    I see you are using the ExportPDF subscription. How large is your file?
    Try these two items:
    'Getting started guide'
    OCR
    Let me know if those help!
    Regards, Stacy

Maybe you are looking for

  • S_ALR_87013611 Report Issue

    Hi All we are reffering CO report S_ALR_87013611, where in the output for some line item we are getting material consumption quantity ok for some cases we are not getting material quantity & in some cases we are getting wrong quantity. We are getting

  • How do I disconnect an old icloud account from my iPhone 5?

    When I bought my iPhone, I did not have an icloud account so I used my sister's account. Now that I have an icloud account, I want to change the old one and use the new, but it shows me that the old account will be eliminated and I don't want to elim

  • Making a Gallery photo "close up" for viewing

    I'm finding something odd on my Droid X. I take a pic. It goes to the gallery. But, when I tap it in the gallery, the screen goes black. If I continue to tap the screen, I get a circle with an "i" in it in the bottom right hand corner, what looks lik

  • In RH9, random conditional build tags appear within topic text

    I have assigned conditional build tags to text within a topic. After closing the topic and re-entering at a later time, other (additional) text now has the conditional build tag assigned as well. However, I did not assign the tags to those other sect

  • I have change some fields in  (Production order component )

    I have change some fields in (Production order component overview)