Error in Distributing the model view

Hi,
I have clients 600, 610 & logical systems (ls_600, ls_610) in the same system.
I am trying to set up the ALE customizing and distribute the model view.
I have created RFC from 600 to 610 and the test connection is fine.
I have created a model view in which i have given sender system as LS_600 and
receiver system as LS_610 and the message type as MATMAS.
In the partner profile(WE20) of LS_610(client 600), in the outbound parameter SYNCH
i have given a port which uses the RFC to 610.
When i have tried to distribute the model view it is giving error as
'communication error occured. Username or password is not correct (Repeat Registration).'
I am not able to figure out the error.
There is also a partner profile as ls_600. Do i have to
make any changes there ?
Do i have to do something in the client 610 ?
Your help is highly appreciated.
Thanks,

Hi Prasad,
Please maintain the MATMAS & SYNCH Message type in the Outbound partner profiles of LS 610.
Test distributing the MATMAS IDoc's using BD10 without even maintaining Distribution Model.
And let me know if you are able to distribute the IDoc or not.
If you get the error. Please let me know the error.
Regards,
Krishna

Similar Messages

Error in distributing the Model View in BD64

Hi Experts,
I have some problem in distributing model view in BD64. please see here the error details:
Model view <logical client> has not been updated
Reason: No authorization to create model view <logical client>
.....authorization object B_ALE_MODL
.....Parameter: activity 01, model view <logical client>
i have created full auth and B_ALE_MODL role for the specific account but still i cant proceed.
Please help.
Thank you,
Tony

Hi Experts,
In addition, this is in line with our integration between SRM 7.0 EHp1 SPS05 and ECC 6.0 EhP4 SPS03. both systems are running in windows 2003 64bit.
Edited by: Tony on Aug 3, 2011 4:30 AM

IDoc to IDoc scenario: distribute the model view

Hi!
I try currently to configure a IDoc to IDoc scenario for SAP ECC 6.0 system with following business 2 systems:
ERP:100 (Sender)
ERP:200 (Receiver)
and XIB:100 (XI system)
I successfuly created a message type and generated the model view in tcode BD64.
Question:
When I try to distribute the model view which system should I choose?
a) XI System or
b) Receiver system ERP:200
When I choose the receiver system ERP:200 and get the following error
Target system: ERP:200
Model view ECCCLNT100 has not been updated
Reason: Distribution model is currently being processed
When I try to choose my XI system I get the following error:
Target system: XIB:100
RFC destination for synchronous communication (message type SYNCH)
Partner profile LS PIBCLNT100 SYNCH does not exist
Generate partner profile
or specify outbound partner profiles for message type SYNCH
Is that an error? If yes, how can I fix them?
Thank you very much
Thom

Hi
Look my reply on this thread regarding SYNC Message Type.
Re: problem while distribute model view
When I try to distribute the model view which system should I choose?
a) XI System or
b) Receiver system ERP:200
You are sending IDoc to XI then R/3 so select XI system. because receiver of IDoc is XI then IDoc would be send from XI.

Error while distributing the model

Hi
I am not able to successfully distribute my model thru BD64. I am getting the error msg as ' the model has not been updated'.The configuration done till now is according to the basic procedure.
Can anyone please suggest a way to overcome this error.
thanks

Hi,
You can create a distribution model and then add message type to it; however, there are some preconditions which you need to ensure before you create the model.
Preconditions:
1) Ensure that you have the message type in both the systems; if custom msg type is used, you need also to create the one in the partner system.
2) Do all configuration related to msg type, idoc type, etc in your partner system as well
3) Create RFC destination in the current system for your partner system... and test the connection if it is working fine
After you create the model and added msg type to it, you also need to do the following:
1) Go to Edit --> Model View --> Distribute to distribute/ create it in your partner system
2) To validate, you can check in your partner system if the model is automatically created there
3) Then create Partner profile in both the systems by going to Environment --> Generate Partner Profiles
Hope it helps and solves your problem.
Regards, Tapas
<Pls award pts if useful or answered>

Error in distribution of model view

I created a modelview for distribution of CLFMAS types IDOCS from DEV to PRD.
Created ports,RFC destination etc.
I was able to generate partner profile in the sending system.When I try to distribute the model view in BD64,
I get this error . Initially, I thought it was because I did not have authorization for BD64 in PRD. Now that I have, I still get this error.. Any advice ?
Distribution of model view CHARS2PRD
Target system PRD100                      Communication error occurred
Process request without transaction. TID is empty.

I see the message did not post properly..THis is the message..
Distribution of model view CHARS2PRD
Target system PRD100                      Communication error occurred
Process request without transaction. TID is empty.

Related to distribution the model view

hi
When we try to distribute the model view, we get an error 'Model View has not been updated. Reason : Maintenance systems for model view D-HR-MD are not identical...Maintenance system in sending system D-OFS-HR.....Maintenance system in receiving system DH3-500' .
What is being referred to as the maintenance system here? Are we missing out on something?

Are you created distribution model for the correct Logical systems. Check it once.

Error - Distributing the Model using BD64

Hi! All
Not able to distribute the model from the Sender System.
Error : Model view ZDMKANBAN has been changed
While Generating the Partner Profile able to generate Partner, Port, Outbound parameter from the Sender System.
but if i execute an IDOC through WE19 able to get the Status - 03 for Sender System & Status - 53 for Receiver System
when i try to transfer IDOC from Sender System to Receiver System could not do it.
Hope so bz of error occurred in Distribution Model. Is it So
kindly help me.

you have to distribute the distribution model in its new version

Error while distributing the ALE distribution model through BD64

Hi,
I am getting the error while distributing the distribution model through BD64. The error is as follows:
"Model view DVGDVH has not been updated
Reason: the following ALE connection already exists in model view TESTMOD".
What does this means?
Regards,
Soumya.

Dear Sapera,
I faced the same problem last night.
We just manually deleted the distribution model from receiving system.
Log on to receiving system => BD64 => change/dispay => edit => delete => Save.
Once deleted log in to sender system and then select model and distribute again.
by performing this we were able to resolve this issue.
Warm regards,

Error while distributing customer model

hi,
i am getting the following error when i am trying to send data between two R/3 systems using distribution model
i am unable to distribute the model to the other system
Error:
"Target system is an external System. It does not support this function."
even after successfully generating partner profiles i am getting this error.
could someone help me out with this problem

Hi Siddharth
Can you please update about all the ALE setting that you have done before trying to distribute the model to the other system.
And whether you have put correctly - the sender and receiver while creating the distribution model. And, most importantly the partner profiles?
Please update..
Regards
Ashish

Unable to distribute the MODEL to backend system in SRM 5.0

Hello Experts,
I have created distribution model " SRM_to_R3" in BD64, maintained message types BBPCO, BBPIV and MBGMCR
Every time I try to Distribute this MODEL to back end system I get the following error in IDES system
Target system T90CLNT090       Commnunication error occurred, error when opening an RFC connection
RFC connections are
T90CLNT090   - SRM to R3
SRM_00_800   - R3 to SRM
Systems got connected successfully and I can "Remote Logon" too......
My query is why am not able to send or distribute the MODEL from SRM to ECC backend system ?
How to get rid of the error and successfully distribute MODEL to backend system.........appreciate your help in this regard
Rgds !
SAP Novice

Hi Zuljana,
Kindly check if your partner profile is active. (Indicated by 'A')
Sometimes if your partner profile is not active, you wont be able to distribute your model. Check the 'A' indicator
Regards,
Nikhil
Edited by: Pbponikhil on Dec 21, 2010 4:11 PM

Error while calling the EAI Viewer

Dear all,
I am working on Document Management System ECC 6.00
I am able to upload a PDF document in to the system, but when i save it and try to call the document back it is giving me the folllowing error."Error while calling the EAI Viewer" But when i try to open the same in the next PC it is opening. the work station application which i have defined is EAIWeb.webviewer2D.1 %SAP-CONTROL% for the application .pdf.
Kindly suggest what will be the problem as it is not opening in my PC but opening in an different PC with the same user name.
Kindly suggest.

Hi Kishuz ,
ECL Viewer comes with SAP
It is Engineering client viewer, which works for files like *.jt(jupiter technology), *.pdf(acrobat), *.dwg(autocad), *.step, *.iges
with ECL viewer you can view files like dwg without having Autocad Installed on your machine.
Alos it gives redlining feature...
thus layers help in indicating the modifications needed or commenting on the drawings...
Now the procedure for installation,
1. Install the latest SUN JAVA version. The path could be <b>c:\program files\java\</b>
2. While installing SAP GUI, ensure that the ECL component is not selected from R/3 Add On.
4. Install ECL Viewer 5.1.2 on local machine.
5. Ensure the path is as follows :(C:\Program Files\Common Files\SAP Shared\System or C:\Program Files\Common Files\SAP Shared\System\Java )
6. Ensure that the following files are in the <b>c:\program files\java\1.5.0_08\lib\ext</b>
folder:
- VisWebS.jar,
- VisWeb.jar,
- eaisupport.jar,
- eaisupportS.jar
- version.ini
- vctk.ini
In case, please copy the mentioned files from <ECL Install DIR>\java.
(C:\Program Files\Common Files\SAP Shared\System or
C:\Program Files\Common Files\SAP Shared\System\Java )
Reward points if useful...
regards
Niranjan

Error -: AIP-16001: The model validation engine failed due to an internal s

Hi Gurus,
While reactivitaing the config, I am getting the below error.
Error -: AIP-16001: The model validation engine failed due to an internal system error.
Could you please help me how to resolve this.

These are the log files,
<HEADER>
<TSTZ_ORIGINATING>2009-08-04T05:38:22.454+00:00</TSTZ_ORIGINATING>
<ORG_ID>oracle.com</ORG_ID>
<COMPONENT_ID>IP</COMPONENT_ID>
<MSG_ID>AIP-18529</MSG_ID>
<HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_GROUP>IP</MSG_GROUP>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>essapt020-u009.emrsn.com</HOST_ID>
<HOST_NWADDR>10.236.93.62</HOST_NWADDR>
<MODULE_ID>IP</MODULE_ID>
<THREAD_ID>AJPRequestHandler-ApplicationServerThread-8</THREAD_ID>
<USER_ID>aelshat4</USER_ID>
</HEADER>
<PAYLOAD>
<MSG_TEXT>Error -: AIP-18529: Failed to reactivate the configuration.
     at oracle.tip.configuration.ConfigurationManager.reactivateConfiguration(ConfigurationManager.java:907)
     at oracle.tip.tools.integration.buslogic.deployment.DeploymentEventHandler.handleReactivateConfiguration(DeploymentEventHandler.java:745)
     at oracle.tip.tools.integration.buslogic.deployment.DeploymentEventHandler.performExtendedActions(DeploymentEventHandler.java:249)
     at oracle.tip.tools.integration.event.IPBaseUnboundEventHandler.performActions(IPBaseUnboundEventHandler.java:88)
     at oracle.tip.tools.integration.event.IPEventHandler.handleEventIP(IPEventHandler.java:138)
     at oracle.tip.tools.integration.event.IPEventHandler.handleEvent(IPEventHandler.java:104)
     at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
     at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
     at oracle.cabo.servlet.event.BasePageFlowEngine.handleRequest(Unknown Source)
     at oracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown Source)
     at oracle.cabo.servlet.ui.BaseUIPageBroker.handleRequest(Unknown Source)
     at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
     at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
     at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:231)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:136)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2009-08-04T05:38:22.455+00:00</TSTZ_ORIGINATING>
<ORG_ID>oracle.com</ORG_ID>
<COMPONENT_ID>UI</COMPONENT_ID>
<HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_GROUP>UI</MSG_GROUP>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>essapt020-u009.emrsn.com</HOST_ID>
<HOST_NWADDR>10.236.93.62</HOST_NWADDR>
<MODULE_ID>UI</MODULE_ID>
<THREAD_ID>AJPRequestHandler-ApplicationServerThread-8</THREAD_ID>
<USER_ID>aelshat4</USER_ID>
</HEADER>
<PAYLOAD>
<MSG_TEXT>handleReactivatingConfiguration() - Error -: AIP-18529: Failed to reactivate the configuration.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2009-08-04T05:38:22.456+00:00</TSTZ_ORIGINATING>
<ORG_ID>oracle.com</ORG_ID>
<COMPONENT_ID>UI</COMPONENT_ID>
<HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_GROUP>UI</MSG_GROUP>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>essapt020-u009.emrsn.com</HOST_ID>
<HOST_NWADDR>10.236.93.62</HOST_NWADDR>
<MODULE_ID>UI</MODULE_ID>
<THREAD_ID>AJPRequestHandler-ApplicationServerThread-8</THREAD_ID>
<USER_ID>aelshat4</USER_ID>
</HEADER>

PDF Report Error When Distribute the Output?

REP-0069: Internal Error.
REP-57054: In-process job terminated:Executed successfully but there were some errors when distribute the output.
REP-50159: Executed successfully but there were some errors when distribute the output.
Approximately 5000 Pages
Distribute PDF File Approximately 1700 Files
How i can resolve this issue?

Based that you are in base release I will encourage you to upgrade to the latest patchset for 10gR2 (10.1.2.3) and then apply the recommended bundled patch on top of 10.1.2.3 as several issues have been fixed with
those patches.
Reference
Oracle Reports - Recommended Patch Bundle on Top of 10.1.2.3 (Doc ID 1162562.1)
Regards RZ

Intermittent error when using the Disco Viewer client

Hi, I have a user receiving the following intermittent error when using the Discoverer Viewer client:
“The application encountered an invalid state.
- Discoverer Beans XML Exception. Method: findNode Class: XMLUtils Error: Cannot find parent node. Parent element does not exist in XML document, looking for database_account/eul
OracleBI Discoverer Viewer was unable to find the necessary data for displaying the results of this event. Please correct any errors and try again.”
Any idea what this might be? Any help or direction would be very much appreciated! Thank you!

Hello
Is this related to a single machine or common to a single report or is it purely random?
I did a search on your behalf and came up with nothing related to this error. You may therefore need to raise the problem with Oracle Support.
Just out of curiosity which version of Discoverer are you using?
Michael

Using bind variables in the model view for master detail

Hi all,
I have a master-detail views setup on the following two queries.
In the first query below - I use two bind variables to collect the start and end date.
you have to add (and :startDate = :startDate and :endDate = :endDate) or you will get errors - bind not defined in sql
I then use the viewQueryCriteria to collect the data on a search panel - so far so good. (Make the bind variables required) along with the other criteria.
The bind variables are displayed in the search panel and the data is entered correctly.
The query executes and all is happy.
VIEWOBJECT1
SELECT DepositAccounts.COA_ID,
... ChartOfAccounts.ACCOUNT_CODE || ' ' || ChartOfAccounts.ACCOUNT_TITLE as description
FROM DEPOSIT_ACCOUNTS DepositAccounts, DEPOSIT_ACCOUNT_DETAILS DepositAccountDetails, CHART_OF_ACCOUNTS ChartOfAccounts
WHERE DepositAccounts.ID = DepositAccountDetails.DEP_ACC_ID
and ChartOfAccounts.id = DepositAccountDetails.COA_ID
and :startDate = :startDate and :endDate = :endDate
Now I add the summation of a value (AMOUNT) to the view object (java - create view impl) to the VOViewRowImpl
and everything works - the value is shown in the transient attribute formatted and looking nice.
VIEWOBJECT2
SELECT PostingBatchAccounts.AMOUNT,
FROM POSTING_BATCH_ACCOUNTS PostingBatchAccounts, POSTING_BATCHES PostingBatches
where PostingBatchAccounts.PB_ID = PostingBatches.ID
and PostingBatches.SOURCE_DATE between :startDate and :endDate
Now I need to add the start date and end date to the child query - before the view executes (or the summation is calculated).
The attributes are in the where clause (PostingBatches.SOURCE_DATE between :startDate and :endDate) in VIEWOBJECT2 which is the child.
I need the child records and the summation to work with the date restrictions.
I would assume you could get access to the child view in the VOViewImpl file and set the bind variables there.
Everything I find is based on the JSF - not the model layer - this should be fairly easy (and common). can anyone give me a hand on this?

Hi all,
I have a master-detail views setup on the following two queries.
In the first query below - I use two bind variables to collect the start and end date.
you have to add (and :startDate = :startDate and :endDate = :endDate) or you will get errors - bind not defined in sql
I then use the viewQueryCriteria to collect the data on a search panel - so far so good. (Make the bind variables required) along with the other criteria.
The bind variables are displayed in the search panel and the data is entered correctly.
The query executes and all is happy.
VIEWOBJECT1
SELECT DepositAccounts.COA_ID,
... ChartOfAccounts.ACCOUNT_CODE || ' ' || ChartOfAccounts.ACCOUNT_TITLE as description
FROM DEPOSIT_ACCOUNTS DepositAccounts, DEPOSIT_ACCOUNT_DETAILS DepositAccountDetails, CHART_OF_ACCOUNTS ChartOfAccounts
WHERE DepositAccounts.ID = DepositAccountDetails.DEP_ACC_ID
and ChartOfAccounts.id = DepositAccountDetails.COA_ID
and :startDate = :startDate and :endDate = :endDate
Now I add the summation of a value (AMOUNT) to the view object (java - create view impl) to the VOViewRowImpl
and everything works - the value is shown in the transient attribute formatted and looking nice.
VIEWOBJECT2
SELECT PostingBatchAccounts.AMOUNT,
FROM POSTING_BATCH_ACCOUNTS PostingBatchAccounts, POSTING_BATCHES PostingBatches
where PostingBatchAccounts.PB_ID = PostingBatches.ID
and PostingBatches.SOURCE_DATE between :startDate and :endDate
Now I need to add the start date and end date to the child query - before the view executes (or the summation is calculated).
The attributes are in the where clause (PostingBatches.SOURCE_DATE between :startDate and :endDate) in VIEWOBJECT2 which is the child.
I need the child records and the summation to work with the date restrictions.
I would assume you could get access to the child view in the VOViewImpl file and set the bind variables there.
Everything I find is based on the JSF - not the model layer - this should be fairly easy (and common). can anyone give me a hand on this?

Error in Distributing the model view

Similar Messages

Maybe you are looking for