Error in document date & posting date-- Posting period 001 2008 is not open

hi guru's
while doing vendor creation in XK01, i m not getting the data screens like address, ..etc.i m getting error..posting period not open". what does it mean..
What date i need to give in both fields...?
can anybody send a set of data for me to create a vendor to test for my bdc/lsmw?
can any help me step by step vendor creation in xk01,
I am getting this below....
Posting period 001 2008 is not open
Message no. F5201
Diagnosis
Period 001 of fiscal year 2008 is not open for posting for the variant of posting period 1000.
System Response
Processing cannot be continued.
Procedure
The error can have several causes. In order to eliminate the error, proceed as follows:
1. Check whether the posting date was entered correctly. The system determines the posting period by means of the date.
2. Check whether the required posting period is open for posting for the variant of posting period 1000 and account type +. Make sure that the period is open for posting.
To do this, specify a period interval in which the required period for the variant of posting period 1000 and account type + is contained.
Proceed
thanks

Hi
Kris is right, that message means you can't post a FI document in the period 1 (probably Gennuary) of the 2008, but this can't mean you can't create a new vendor.
So are you sure on trx?
If the trx is right perhaps somebody has inserted a control in a user-exit.
Max

Similar Messages

  • Reg. Posting period 001 2008 is not open

    Dear All
    Kindly reply for the below error: When I try to GRN in my Ides system the following error occured.I cann't solve.
    I checked in OB52,OMSY,OB37,OB29.But I cann't solve this problem. Please help me
    "Posting period 001 2008 is not open"
    Thanks
    Rajakumar

    Hi,
    Let me know if your PO related to assets ... in that cases you should execute the t.code: AJRW  ... change the new fiscal year to 2008.
    wish u all the best
    all the best
    Prasad

  • Error : Posting period 003 2008 is not open

    Hi Team,
    When I m doing recording through transaction FBS1 it is giving me
    error message "Posting period 003 2008 is not open". Can anyone tell me how to avoid this.
    Thank u in advance.

    Hi,
    use transaction OB52 to open the needed period.
    Regards Vassko!

  • Posting period 002 2008 is not open

    Dear All
    The below is my problem.Please help me
    " Posting period 002 2008 is not open
    Message no. F5201
    Diagnosis
    Period 002 of fiscal year 2008 is not open for posting for the variant of posting period .
    System Response
    Processing cannot be continued.
    Procedure
    The error can have several causes. In order to eliminate the error, proceed as follows:
    1. Check whether the posting date was entered correctly. The system determines the posting period by means of the date.
    2. Check whether the required posting period is open for posting for the variant of posting period  and account type +. Make sure that the period is open for posting.
    To do this, specify a period interval in which the required period for the variant of posting period  and account type + is contained.
    Proceed"
    in OB52 -
    0001     +                     1     2008     12     2009     13     2010     14     2014        
    0001     A                    ZZZZZZZZZZ     1     2001     12     2005     13     2001     16     2001        
    0001     D                    ZZZZZZZZZZ     1     2001     12     2005     13     2001     16     2001        
    0001     K                    ZZZZZZZZZZ     1     2001     12     2005     13     2001     16     2001        
    0001     S                    ZZZZZZZZZZ     1     2007     12     2008     13     2008     16     2016        
    1000     +                                   1     2008     12     2010     13     2012     16     2014     
    in OMSY-
    TEST     TEST Company Pvt ltd     2008     2     2008     1     2007     12
    I have copy and past my settings.Pls analys the above and help me.
    Thanks
    Rajakumar

    MM periods follow as
    First go to OMSY and check the current period for your Comp code..
    Then go to MMPV trx..
    and Enter Comp code, period & year..
    Here you need to enter the period you wants to open..
    Ex: The Current period in OMSY is 10,2007
    Then you need to enter period 11 & year 2007 in MMPV.
    So, that period 10 will be closed & Period 11 will be opened automatically..
    Like that you need to close the periods one by one till the period you want to post.
    You can not reopen the closed MM period.
    Pls becareful while doing in PRD client
    and in OB52 maintain Like this
    0001 + 1 2008 12 2008 13 2010 14 2014
    0001 A ZZZZZZZZZZ 1 2008 12 2008 13 2001 16 2001
    0001 D ZZZZZZZZZZ 1 2008 12 2008 13 2001 16 2001
    0001 K ZZZZZZZZZZ 1 2008 12 2008 13 2001 16 2001
    0001 S ZZZZZZZZZZ 1 2008 12 2008 13 2008 16 2016
    1000 + 1 2008 12 2010 13 2012 16 2014

  • Posting period 007 2008 is not open

    HI
    I have customzied a new co code and all othr setting in sand box server. When i'm doing migo, i'm gettitng the blw error..  in omsy , i gave yr 2008 and period as 07
    Posting period 007 2008 is not open
    how to rectify it..

    Hi,
    If you open period in MM side in MMPV and also cross check which period is open in MMRV t.code.
    Now in FI side in t.code: OB52 and open the period 007 2008 for the Account Types A, K, D,M, S and specially Account Type u201C+u201D which stands for valid for all accounts type and save.
    Now try ur transaction.
    Note
    Check OMSY setting:
    Example;
    In OMSY steps, u have to enter .....
    Company Code .....
    Company Name ..............
    Fiscal Year of Current Period 2008
    Current period (posting period) ???
    Fiscal year of previous period 2008( will come automatic)
    Month of previous period( ???-1)( will come automatic)
    Fiscal year of last period of previous year 2007
    Last month of previous year 12
    Allow Posting to Previous Period (Back posting)
    Disallow back posting after a change of period
    For more Check the SAP Notes:487381 & 369637.
    Regards,
    Biju K

  • Posting period 001 2009 is not open

    hi,
    I hace faced the following erroe while doing MIGO.
    "posting period 001 2009 is not open"
    The following setting are checked.
    1. Fiscal year - K4 (OBY6)
    2. Period open - 2009 1 (OMSY)
    What could be the reason for the above error?
    reg
    mrs

    Hi,
    Check in T.code: MMRV and see which period is open for ur Co.Code and back posting is allowed or not.In MMPV close the period last period and automatically system open the new one
    Now in FI Side,use t.code: OB52 and open/check the period 01, 2009 period in Account Types A, K, D,M, S and specially Account Type u201C+u201D which stands for valid for all accounts type is open or not,if not open and save. Better consult FICO consultant for OB52 step.
    Regrads,
    Biju K

  • Posting period 005 2008 is not open

    hai..
    when i am working t.code MIGO after enter purchase order and storeage location i got TICKET " POSTING PERIOD 005 2008 IS NOT OPEN...
    please give me bucket....
    Regards
    Thomas

    Hi,
    First check the Current period in OMSY trx...for your Comp code..
    Then go to MMPV and enter Comp code, Period & Year
    and execute...
    Ex: if the current period in OMSY for your Comp code is 01,2008
    then you need to enter period 02, 2008 in MMPV trx...
    so, that period 01 will be closed & Period 02 will be opened automatically...
    You need to close periods one by one like this..
    until the period you want use...
    Remember you can not Roll back the closed period
    Be careful in closing the MM period in PRD client.
    Thx
    Raju

  • Period 001/2010 is not open for account type S and G/L 799999

    Hi friends
    I am in SD. I am trying to create stock for newly created material, movement type 561. system give error Period 001/2010 is not open for account type S and G/L 799999.
    I use the T. Code OB52, i am confuse which combination i.e. variant, A, from Account, To Account, from per. 1 Year, To period, Year, from per. 2 year, To Period, Year, I should choose, can some one send me detail reply and solution which may display after this t. code OB52. I also have questin which movement type i should use.
    Using T.Code MMPV, i have created new period (from company code 1000, To Company code 1000, period 01, Fiscal Year 1020.
    I was reading previous solution, one of them was i should close period 2009. I tried to do this using using MMPV, i entered fiscal year 2009. Error display  The specified year 2009 is not the current calender year.
    Thanks
    Raj

    Hi
    Hope you are doing this in test server
    If this is a real time issue this needs to be addressed by a FI consultant
    First see for your company code what is the posting period varient maintained in OBY6
    Say if it is 1000
    Then in OB52
    Maintain a setting like this
    1000-S-BLANK-ZZZZZZZZZZ-1--2010122010-13--201016--2010
    Then save it
    This is for Account type S that is GL accounts
    Preferably maintain the same for      A,   + ,   D,   K,   M,   V
    Regards
    Raja

  • Posting Period 001 2010 is not open

    Hello gurus.
    I Have close the MM February Period and Open April Period.
    but while doing Good Receipt for  01.04.2010 , system tell us to open posting period 001 2010 for variant of posting  period PPAI.
    System tell us to Open Finanace  Posting Period 001.
    but our finance work is pending for 2009, so how I open 2010.
    I am waiting your Reply.
    regard,
    Riten Patel

    Dear
    In T.code OB52 maintain the following to keep 2009 & 2010 open.
    Variant   A  From Account  To Account  From Per 1   Year  To Period  Year   From per 2   Year    To period    Year
    PPAI         +                                                    1              2010      1           2010      1                2009       16            2009
    PPAI        A                                                    1              2010      1           2010      1                2009       16            2009
    PPAI        D                                                    1              2010      1           2010      1                2009       16            2009
    PPAI        K                                                    1              2010      1           2010      1                2009       16            2009
    PPAI        M                                                    1              2010      1           2010      1                2009       16            2009
    PPAI        S                                                    1              2010      1           2010      1                2009       16            2009
    Regards

  • I keep getting this error "This document was changed in another application" but I am not opening this doc in another application

    Pages 5.2
    OSX 10.9.2
    I have been getting this error (on keynote as well)
    "This document was changed in another application. To work on that version, click Revert. Changes you made here will be saved as a version on your Mac.  Tip: If you’re using an online storage service, avoid opening the same document on multiple computers at once"
    I am only working on this doc on my MacBook Pro (Ipad is OFF),
    not running pages on my phone
    not logged into iCloud in safari
    document saved to my hard drive (not iCloud or dropbox)

    Getting the same message. Started with the latest update a few days ago. So I guess it's a glitch in the current version and hope Apple will solve that soon by issuing another update which fixes that. It's really annoying and makes it quite impossible to use the application at all.
    Meanwhile open Pages, go to Pages, Provide Pages Feedback, choose Feedback Type: Bug Report and explain the problem in the Comments box.
    http://www.apple.com/feedback/pages.html
    I think that's all you can do for now. But it's important for people to report the problem since I don't know how closely Apple is monitoring these Forums.

  • Posting period 011 2013 is not open while posting the document using F-02 getting the error

    Hi SAP Captains,
    Pls help me here.
    While posting the document using T-code F-02 getting the error "Posting period 011 2013 is not open.
    Please help me how to do, can you provide step by step.
    Rgds..Suresh

    Hi Suresh,
    You can search google and will get number of posts on this. This will lead to duplication of similar posts on forum.
    The message says "FI posting period is closed for 11th period of 2013". In which period you are trying to post the transaction?
    If it is past, open the FI posting periods in OB52.
    BR, Srinivas Salpala

  • Posting period 002 2011 is not open (MRKO)

    Dear experts,
    I process Vendor consignment:
    1. Goods receipt - 501K
    2. Transfer posting - 411K
    3. MRKO
    On MRKO, I choose Document date and Posting date is: 17.12.2010
    Open period in MM: 01/2011 (12/2010)
    Now is 02/2011 but I want to post in 17.12.2010
    I get this error:
    Posting period 002 2011 is not open
    Message no. F5201
    Diagnosis
    Period 002 of fiscal year 2011 is not open for posting for the variant of posting period 2650.
    System Response
    Processing cannot be continued.
    Procedure
    The error can have several causes. In order to eliminate the error, proceed as follows:
    1. Check whether the posting date was entered correctly. The system determines the posting period by means of the date.
    2. Check whether the required posting period is open for posting for the variant of posting period 2650 and account type +. Make sure that the period is open for posting.
    To do this, specify a period interval in which the required period for the variant of posting period 2650 and account type + is contained.
    You make these settings in Customizing of Financial Accounting (New) under Financial Accounting Global Settings (New) -> Ledgers -> Fiscal Year and Posting Periods - > Posting Periods -> Open and Close Posting Periods.
    Plz help!

    Hi,
    If you are sure Open period in MM: 01/2011 (12/2010) & 02/2011 not opened( can be cross checked in MMRV)
    As you want post in 12/2010,then use t.code: OB52 and open the 12, 2010 period in Account Types A, K, D,M, S and specially Account Type u201C+u201D which stands for valid for all accounts type and save.
    Regards,
    Biju K

  • Posting period 005 2020 is not open when perfomr /dbm/cashdesk cancellation

    Hi Expert,
    Currently our SAP DBM on patch7 & SP04 (latest), now i would like to cancel cash document in /dbm/cashdesk and system come out with error as below:
    Posting period 005 2020 is not open
    Message no. F5201
    Diagnosis
    Period 005 of fiscal year 2020 is not open for posting for the variant of posting period 5000.
    System Response
    Processing cannot be continued.
    Procedure
    The error can have several causes. In order to eliminate the error, proceed as follows:
    1. Check whether the posting date was entered correctly. The system determines the posting period by means of the date.
    2. Check whether the required posting period is open for posting for the variant of posting period 5000 and account type +. Make sure that the period is open for posting.
    To do this, specify a period interval in which the required period for the variant of posting period 5000 and account type + is contained.
    You make these settings in Customizing of Financial Accounting (New) under Financial Accounting Global Settings (New) -> Ledgers -> Fiscal Year and Posting Periods - > Posting Periods -> Open and Close Posting Periods.
    I able to post cashdesk document in customer incoming payment tab and i cannot cancel due to posting period 05 & year 2020 not open.
    Currently we are in 05 2011 not 2020, is any expert can advice where to set cashdesk fiscal year configure?
    I need to open FI period until 05 2020, then my cash document cancellation is successful.
    Thanks
    regards,
    ng chong chuan

    Hi,
    First check the Current period in OMSY trx...for your Comp code..
    Then go to MMPV and enter Comp code, Period & Year
    and execute...
    Ex: if the current period in OMSY for your Comp code is 01,2008
    then you need to enter period 02, 2008 in MMPV trx...
    so, that period 01 will be closed & Period 02 will be opened automatically...
    You need to close periods one by one like this..
    until the period you want use...
    Remember you can not Roll back the closed period
    Be careful in closing the MM period in PRD client.
    Thx
    Raju

  • My Applications, Mail, Contacts, Calendars, Reminders, Safari, Notes, Documents, & Data, Find My iPad,  Because of  Inactivity iCloud not open.

    My Applications, Mail, Contacts, Calendars, Reminders, Safari, Notes, Documents, & Data, Find My iPad,  Because of  Inactivity iCloud not open.
    Habibullah Allah Yar
    <Personal Information Edited by Host>

    These are user-to-user forums, you are not talking to Apple here, so I've asked the hosts to remove your email address, postal addresses and phone numbers from your post.
    I'm not entirely sure what you are saying, but if those apps are crashing then have you tried toggling them 'off' and 'on' via Settings > iCloud ? And if that doesn't fix it then try closing them via the iPad's taskbar : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    You could also try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If it's a different problem ... ?

  • Posting period 004 2009 is not open

    Hi
             While doing t-code F-28 i am getting the following error
    "Posting period 004 2009 is not open"
    How to solve this.
    Thanks
    Anto

    Hi
    Check the status in OB52 whether the period 004 is opened
    This error status that posting period 004 is not open so open the Posting period and Post
    Hope this will help you

Maybe you are looking for

  • Foreign currency Payment using foreign currency bank account

    Hi, We have the following requirement: Functional currency : GBP Bank Account :USD Need to make payments in CAD Since the bank account is not in functional currency we are unable to make that multi currency payment enabled. Users do not want to creat

  • Steve Muench Example 105

    Hi everyone, I have implemented Steve's example 105 for unique key validator using ADF Business components. Can anyone explain to me how can i implement this functionality using EJB? Thanks Antonis

  • PNY Quadro K5000 Mac Edition - Audio Problems via DP/HDMI adapter

    Hello, as stated in the topic I have some troubles to get the sound working on my TV witch is plugged into the Mac Pro via HDMI/DP adapter. Setup: Mac Pro 5.1 with OSX 10.9.5 Graphics PNY Quadro K5000 Mac Edition My Question ist this: Ist there a Pro

  • Currency translation with user defined exchange rates in a BEx report

    Hi guys, our business department requests a new functionality in our BW system. They want to simulate a currency translation in a BEX report. But this currency translation should be so flexible, that the user can change the exchange rates directly in

  • The lock-object in synchronized clause.

    If two threads are entering a synchronized statement, what condition on the lock-statement is then tested? Say, we have: Object lock1 = new Object() {          public boolean equals(Object aObj) {             return true; Object lock2 = new Object()