Error in document number while posting the material

Dear experts
while posting the stock MB1C for the material the error is " incorrect doc number $ 1 .select doc number between 800000100 and 800000199.
how to correct this error. where to check this number ranges of document.
Thanks & Regards.
Erfan.

Hi
The document type, which is integrated for Material related posting is appears to be configured as "External Document Number Ranges". In the event of external number ranges, MM transaction tries to post same document number individually at MM system and propose same number in FI for Accounting Posting. If the proposed number is not within document number ranges, then you would expect this kind of errors.
What you need to do is:
1. See the document type, which is being posted and set correct number ranges as per MM transaction document type number ranges or
2. change MM transaction number rages in order to FI document number rages
Hope this helps

Similar Messages

Error 'Specify account number' while posting a parked document through FBV0

Hi,
I am getting an error 'Specify account number' while posting a parked document through transaction FBV0.
I am not able to figure it out as to what account number it is referring to. Since the document is parked I assume the GL account used has no problem. Please help.

Hi,
Try to change the Account number and then save or post the data. I think Once We Parking the Document it wont allow to post the data without changing.
Try same scenario in the development its be useful
Regards,

How can we find the Idoc number which posts the material document in SAP

Hi All,
How can we find the Idoc number which posts the material document in SAP. We could not able to find the IDOC number from the material document which was posted by Idoc.
Thanks
Chandru

Hi,
In MIGO you can go to service of object(Just above show overview) and check 5th option workflow you will find the idoc number.
regards
suresh

Error while posting the material

Hi experts,
While intially posting the material in Mb1c by movement type 561.
while saving it show the below error
"Account determination for entry GKR GBB ____ BSA 3000 not possible"
pls help
regards
arun

Have u checked this first
go to OMWD and put the valution grouping code may be u r using 0001 for ur valuating area (plant) and company combination
hear this is missing so u r having the error
if yes
then go to OBYC
click on gbb give chart of account i think in ur case its GKR then find entry with
0001 BSA 3000 GL or
BSA 3000 GL
if this entru is missing
the ask ur fi person to creat gl account to initial balace upload in FS00
may be copy of 399999 std sap have for copmpanyt code 1000
and creat a entry
0001 BSA 3000 GL
BSA 3000 GL
hope this will clear ur issue
Reward if issue solved
Message was edited by:
Umakant Bhangale

Error messege BP603 while posting the parked document budget exceeded

Hi ,
We are having the budget function and its for overall release.
Budget has been relased and assigned value is less then the released budget in all conditions.
Its throwing the error messege No BP603 while posting the parked documents. Unable to understand the reason why its behaving.
Please let me know if anybody has faced such problem.
We are into ECC6, EHP 4 and the SAP note 557431 is not going to help anyways.
Regards
N.Raju

Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu

Error message type M7093-While posting to Cost center

Hi All,
While posting the material to cost center in MB21 201 movement i am getting the following error message :
Fld selectn for mvmt type / acct (G/L accnt no) differs for Business Area
Message No M7093
Please help me.
I am not able to post this document.
Regards,
Nagaraj S

Hi
Check the field status group assigned to GL account in FS00 and check its assignments in OBC4.
Also check mvt type settings in OMJJ transaction - 201 mvt - field selelction - additional account assignment (here business area is optional.)
You need to change either of them. Take help of FI consultant.
Thanks

BAPI_GOODSMVT_CREATE - Error while posting a Material Document

Hi Experts,
We are trying to do the material document posting using the transaction "MB1C" manually in SAP. The movement type which we are using for the same is "261". While doing this is, it is asking for a work order number and the Recipient number. We gave the Recipient Number as "123". Material document is created successfully.
Again using the same transaction "MB1C" , we are trying to do the reversal of the material document which we posted previously against another work order number for the same material and the serial number if the material is serialised and as well as for the non serialised material.
Both this case, in SAP the material document is created succesfully. This is done manually in SAP.
When we are trying to create the material document using the BAPI 'BAPI_GOODSMVT_CREATE', for the above scenario, posting the material document '261' movement type for one work order and the reversal for another work order '262' movement type for the same material (whether it is a serialised or non serialised) we are getting the eror as "RE Qty. transferred exceeded 1 PC: 50,003,695 C001 USED 1200".
We are passing the following at the item level. MATERIAL Number, Plant, STGE_LOC, ENTRY_QNT, MOVE_TYPE, BATCH, ORDERID, RESERV_NO, RES_ITEM, ACTIVITY, XSTOB for reversal.
We are passing the GM_CODE as '05'.
Please let us know what needs to be changed inorder to create the material document properly without getting errors.
Thanks in Advance,
Mohan.

Hi,
We fixed this issue by removing the reservation number of the material when we are trying to post the material document with the movement type "262".
The reason for removing the reservation number for the movement type "262"
The reservation number is getting created against a work order when we trying to create the work order in IW32. This reservation number is used for validating the stock while we are trying to consume and doing the reversal.
SAP is allowing us to reverse the consumed quantities only based on the reservartion number and hence we got this error.
To fix this error, if we are trying to reverse a particular material against a different work order for which it has been consumed previiously, remove the reservation number and item number and try posting the material document.
Hope this solution will solve your issue:)
Thanks and Regards,
Mohan.

ERROR WHILE POSTING THE STOCK OF MATERIAL

Dear experts
while posting the stock of material iam getting the error 'number ranges for transevent type WA in year 2011 does not exist.
what transaction should be used .
Thanks & Regards.
Erfan.

Dear,
First of all please go to T-code FBKP, click on Document Type, double click on document Type "WA" and check what is the value in Number Range.
For Example there it is 01, then got to FBN1, enter company code and give give 01 and against this maintain number.
Hope this helps!!!
Br,Vivek

Error (Short Dump) while posting any Material document

Hello All Experts,
I am facing an error (short dump) while doing all material document related transactions (for example MIGO,MB1A etc) . I am getting the below message:-
Short text of error message:
Document number 1000 5000000000 2009 was already assigned
Earlier, I had posted some material documents using the same transactions.
Kindly help
Regards,
Atul

Hi Atul,
Please use T-code OMBT to check the number range status of material document. You can click on the 'Intervals' button to check the 'Current number', the last material document number the system was created so far. Try to change the 'Current number' to a number greater than 5000000001, save the change, and post material document again.
Hope it can solve your issue.
Cheers

Posting period 011 2013 is not open while posting the document using F-02 getting the error

Hi SAP Captains,
Pls help me here.
While posting the document using T-code F-02 getting the error "Posting period 011 2013 is not open.
Please help me how to do, can you provide step by step.
Rgds..Suresh

Hi Suresh,
You can search google and will get number of posts on this. This will lead to duplication of similar posts on forum.
The message says "FI posting period is closed for 11th period of 2013". In which period you are trying to post the transaction?
If it is past, open the FI posting periods in OB52.
BR, Srinivas Salpala

No document is generating while withraw or posting the material

Hello
When I am posting the material say by IW8W system is not generating any document
Even while withdraw by 261 we are not getting the documnt .Actually it is doing everything ok like posting withdraw but why the system is not generating the document can you guys more light on this
Regards
chandrashekhar Ingole

Hi
I tried by putting the tick in custimizing but still it is not generating any other possiblity
Even the message after 261 withdraw of material form ware house is not coming that the document number so & so are posted that is also not coming but material is posting
Regards
chandrashekhar

Error while posting the IDoc for Customer Invoice.

hi,
I m posting Customer Invoice through LSMW using IDocs.
Basic type is FIDCCP02 and message is FIDCC2.
While posting the Idoc I m getting error as:
'Document or line item does not exist for invoice reference'.
I m not getting the error why it is asking for invoice reference because
in FB01 it is not asking for any reference or anything.
Even in f-22 also it is not asking for the same.
In Idoc all the item level values are coming prorperly.
If anybody worked on such issues then please reply.
-Thanx.
-Umesh

Hi,
Where you able to resolve your issue, I would appreciate if you can share the solution.
Thanks

Error while posting the payroll results to accounts

Dear all,
Im facing a issue while posting the payroll results to the accounts in T.code PC00_M99_CIPE,
The error log says...
Inconsistence in payroll results (tables V0/RT)
Diagnosis:
An inconsistency results has been found during the evaluation of the payroll results. No referenced entry has been found in table V0.
Can anybody suggest me wat i hav to do...
Thanks & regards
Gopinath.Balakrishnan

Hi
Check whether the user is having the authorisation for the t.code PC_PAYRESULT or PC00_M40-PAYRESULT.
Because some times HR user will run the payroll and FI user will do the postings. If FI user is doing the postings, in general he will not have the authorisation for HR T.codes, then system will give such kind of errors.
If not check the paryoll results and control record.
Thanks & Regards
Bharathi

Error occured while posting the job schedule for JDBCAdapter

Hi Experts,
In Application Log in Path: "/usr/sap/<SID>/DVExxxx/j2ee/cluster/server1/log", I see the error:
#/Applications/ExchangeInfrastructure/AdapterFramework/Services/Util
##com.sap.aii.af.service.scheduler.SchedulerManagerImpl.postJobScheduleOthers(String, int)
#J2EE_GUEST#0##n/a##f7956e1f6b4711e0b851001e0b5d3ac8#SAPEngine_Application_Thread[impl:3]_23##0#0
#Error#1#com.sap.aii.af.service.scheduler.SchedulerManagerImpl#Plain
###error occured while posting the job schedule for JDBCAdapter_9f0584b1bcb33b94b67ada456233bcb8 with 2#
Frequently are created Lock's and I need remove them in Visual Admin.
Any idea about this error?
Tks in advance.

Hi,
After applying the SP 23 Patch Level 08, LOCK JDBC problems stopped.
But now when a network error or database error, the JDBC Sender Communication channels that were open to connection, are blocked.
Even following the instructions in [SAP Note 1083488 - XI FTP_JDBC sender channel stop polling indefinitely (04_04S)|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1083488] the problem continues.
I've already set the parameter "taskTimeout" and selected the option "Disconnect from Database After Each Message Processing" but not resolved.
Any ideas?
Thanks in advance.

Error-while posting the goods in plant

Hi,
i got error message like this while posting goods in the plant with t.code MB1C
"Account determination for entry INT GBB_______ BSA 3100 is not possible"
can any one know about solution for this error
Thanks&regards
kishore kumar

hi
Hi,
Use t.code:OBYC, enter chaart of account
Click GBB
In next screen enter Val. Gro. Code, Acct Gro. Code, Valuation class and G/L accounts for Dr & Cr and save.
Note: before that u have save the Rules
How to save Ruls:
OBYC-> enter chart of account-> Click BSX->Click Rules
Select the check box of Debit/Credit in accounts , General modification, Valuation Modification, Valuation class Account are determine based on TAB and save.
Regards,

Error in document number while posting the material

Similar Messages

Maybe you are looking for