Error in downloading data from R3
Hi Experts,
I am having one z program having alv grid display. there is one field of order(aufnr) in the output. While downloading data to desktop in excel format last character of the order is getting deleted.
e.g.
if order is 14001090931
then it is getting stored as 1400109093 on the desktop.
Interesting part is that while downloading data through option of local data i am getting this issue, if i choose spreadsheet data is getting copied properly.
Hi,
Using com_hierarchy check whether hierarchies are present are not. Start down load of customizing objects first and then business objects. In R3AS select DNL_CUST_BASIS3,DNL_CUST_PROD0, DNL_CUST_PROD1, then MATEIRAL and start down load again.
Rgds,
RRK
Similar Messages
-
Error while downloading data from internal table into XML file
hi all,
i developed a program to download data from into internal table to xml file like this.
tables: mara.
parameters: p_matnr like mara-matnr.
data: begin of itab_mara occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
aenam like mara-aenam,
vpsta like mara-vpsta,
end of itab_mara.
data: lv_field_seperator type c, " value 'X',
lv_xml_doc_name(30) type c, " string value my xml file,
lv_result type i.
lv_field_seperator = 'x'.
lv_xml_doc_name = 'my xml file'.
types: begin of truxs_xml_line,
data(256) type x,
end of truxs_xml_line.
types:truxs_xml_table type table of truxs_xml_line.
data:lv_tab_converted_data type truxs_xml_line,
lt_tab_converted_data type truxs_xml_table.
data: lv_xml_file type rlgrap-filename value 'c:\simp.xml'.
select matnr ernam aenam vpsta from mara into table itab_mara up to 5
rows where matnr = p_matnr.
CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
EXPORTING
I_FIELD_SEPERATOR = lv_field_seperator
I_LINE_HEADER =
I_FILENAME =
I_APPL_KEEP = ' '
I_XML_DOC_NAME = lv_xml_doc_name
IMPORTING
PE_BIN_FILESIZE = lv_result
TABLES
I_TAB_SAP_DATA = itab_mara
CHANGING
I_TAB_CONVERTED_DATA = lt_tab_converted_data
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
open dataset lv_xml_file for output in binary mode.
loop at lt_tab_converted_data into lv_tab_converted_data.
transfer lv_tab_converted_data to lv_xml_file.
endloop.
close dataset lv_xml_file.
this program is syntactically correct and getting executed, but when i open the target xml file it is showing the following error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'file:///C:/simp.xml'.
will anyone show me the possible solution to rectify this error
thanks and regards,
anil.Hi,
Here is a small sample program to convert data in an internal table into XML format and display it.
DATA: itab TYPE TABLE OF spfli,
l_xml TYPE REF TO cl_xml_document.
* Read data into a ITAB
SELECT * FROM spfli INTO TABLE itab.
* Create the XML Object
CREATE OBJECT l_xml.
* Convert data in ITAB to XML
CALL METHOD l_xml->create_with_data( name = 'Test1'
dataobject = t_goal[] ).
* Display XML Document
CALL METHOD l_xml->display.
Here are some other sample SAP programs to handle XML in ABAP:
BCCIIXMLT1, BCCIIXMLT2, and BCCIIXMLT3.
Hope this helps,
Sumant. -
Hi ,
I am facing a problem when ever i am going to donload data from ALV grid to excel file.I am getting CL_SALV_BS_TT_RESULT_TABLE====CP error in GET_CELL_VALUE. Could you please provide me is there any OSS note or any patch required to solve this issue.
Thanks in Advance,
Venkatarao.Hi,
Just refer to OSS note 1356898 for guidelines.
Regards,
Vasanth -
Error While Downloading data from UPDATE Style Integrator
Timestamp format must be yyyy-mm-dd hh:mm:ss.fffffffff
I have an UPDATE Styled Integrator which is based on a view.
The View DDL is as follows :
CREATE OR REPLACE VIEW XXC_HR_SIT_V
(EMPLOYEE_NUMBER, BUSINESS_GROUP_ID, PERSON_ID, ID_FLEX_NUM, ID_FLEX_STRUCTURE_CODE,
DATE_FROM, DATE_TO, OBJECT_VERSION_NUMBER, PERSON_ANALYSIS_ID, ANALYSIS_CRITERIA_ID,
SEGMENT1, SEGMENT2, SEGMENT3, SEGMENT4, SEGMENT5,
SEGMENT6, SEGMENT7, SEGMENT8, SEGMENT9, SEGMENT10,
SEGMENT11, SEGMENT12, SEGMENT13, SEGMENT14, SEGMENT15,
SEGMENT16, SEGMENT17, SEGMENT18, SEGMENT19, SEGMENT20,
SEGMENT21, SEGMENT22, SEGMENT23, SEGMENT24, SEGMENT25,
SEGMENT26, SEGMENT27, SEGMENT28, SEGMENT29, SEGMENT30)
AS
select papf.employee_number,
papf.business_group_id,
papf.person_id,
fifs.id_flex_num,
fifs.id_flex_structure_code,
ppa.date_from,
ppa.date_to,
ppa.object_version_number,
ppa.person_analysis_id,
pac.analysis_criteria_id,
pac.segment1,
pac.segment2,
pac.segment3,
pac.segment4,
pac.segment5,
pac.segment6,
pac.segment7,
pac.segment8,
pac.segment9,
pac.segment10,
pac.segment11,
pac.segment12,
pac.segment13,
pac.segment14,
pac.segment15,
pac.segment16,
pac.segment17,
pac.segment18,
pac.segment19,
pac.segment20,
pac.segment21,
pac.segment22,
pac.segment23,
pac.segment24,
pac.segment25,
pac.segment26,
pac.segment27,
pac.segment28,
pac.segment29,
pac.segment30
from per_person_analyses ppa,
per_all_people_f papf ,
fnd_id_flex_structures fifs ,
per_analysis_criteria pac
where 1 = 1
and ppa.person_id= papf.person_id
and papf.current_employee_flag = 'Y'
and trunc(sysdate) between papf.effective_start_date and papf.effective_end_date
and ppa.id_flex_num = fifs.id_flex_num
and pac.id_flex_num = ppa.id_flex_num
and pac.analysis_criteria_id = ppa.analysis_criteria_id
order by to_number(employee_number),ppa.date_from
In my WEBADI Layout also I have defined the columns exactly same as in view. But when I try to run the WEB ADI it gives the following error :
Timestamp format must be yyyy-mm-dd hh:mm:ss.fffffffffHi Guys,
I have placed a function TRUNC() befor the date columns and now it works fine -
Error message: when downloading data from 2nd display tag table
I am using disaply tag to display data in jsp page. I am using three different section to display the data with three display tag table. The data is displaying correctlly. The display tag downlod excel sheet is working for first display tag table. When i am trying to download data from 2nd and 3rd display tag table i am getting following error:
Exception: [.TableTag] Unable to reset response before returning exported data. You are not using an export filter. Be sure that no other jsp tags are used before display:table or refer to the displaytag documentation on how to configure the export filter (requires j2ee 1.3).
at org.displaytag.tags.TableTag.writeExport(TableTag.java:1438)
at org.displaytag.tags.TableTag.doExport(TableTag.java:1364)
at org.displaytag.tags.TableTag.doEndTag(TableTag.java:1215)
at org.apache.jsp.InstalBase_005fReport_jsp._jspService(InstalBase_005fReport_jsp.java:974)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:595)
As per the Exception i don't have any jsp tag before the display tag.
Please help me if any body has any solution for the above exception.
Thanks in advance.
Smruti..See also http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html
-
Error while exporting data from ABAP to Excel
Hello All,
iam trying to download data from ABAP scrn to Excel using I_OI_SPREADSHEET METHODS. I get an error in method 'SET_RANGES_DATA' - 'Memory protection fault occurred in document interface'.
I have pasted my code below. Kindly help me to solve this issue.
Create container ??
CALL METHOD c_oi_container_control_creator=>get_container_control
IMPORTING
control = g_control
error = g_error.
Initialize
CALL METHOD g_control->init_control
EXPORTING
r3_application_name = 'Basis'
parent = g_container
register_on_close_event = c_reg_on_close_event
register_on_custom_event = c_reg_on_custom_event
no_flush = c_no_flush
IMPORTING
error = g_error.
Set Doc type
g_document_type = 'Excel.Sheet'.
Create Proxy
CALL METHOD g_control->get_document_proxy
EXPORTING
document_type = g_document_type
IMPORTING
document_proxy = g_document
error = g_error.
CALL METHOD g_document->create_document
EXPORTING
document_title = 'Excel'. "#EC NOTEXT
CALL METHOD g_document->get_spreadsheet_interface
IMPORTING
sheet_interface = g_handle.
CHECK g_document IS NOT INITIAL.
read selected line data from gtab
READ TABLE g_tab_data INDEX 1 INTO l_wa_pos_trans.
Get Field Descriptions
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
tabname = 'TRIGS_EXPORT_EXCEL'
langu = sy-langu
TABLES
dfies_tab = lt_dfies
EXCEPTIONS
not_found = 1
internal_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Header for User Data
l_h_cnt = 1.
LOOP AT lt_dfies INTO lwa_dfies.
IF lwa_dfies-fieldname EQ 'USER_ID' OR
lwa_dfies-fieldname EQ 'EXCEL_DATE' OR
lwa_dfies-fieldname EQ 'EXCEL_TIME' OR
lwa_dfies-fieldname EQ 'SECURITY_ACCOUNT' OR
lwa_dfies-fieldname EQ 'SECURITY_ID' OR
lwa_dfies-fieldname EQ 'COMPANY_CODE'.
PERFORM fill_cell USING l_h_cnt 1 1 lwa_dfies-scrtext_m.
l_h_cnt = l_h_cnt + 1.
ENDIF.
ENDLOOP.
Fill Header Values
PERFORM fill_cell USING 1 2 1 sy-uname.
PERFORM fill_cell USING 2 2 1 sy-datum.
PERFORM fill_cell USING 3 2 1 sy-uzeit.
PERFORM fill_cell USING 4 2 1 l_wa_pos_trans-company_code .
PERFORM fill_cell USING 5 2 1 l_wa_pos_trans-security_account.
PERFORM fill_cell USING 6 2 1 l_wa_pos_trans-security_id.
Texts
l_h_cnt = l_h_cnt + 1.
PERFORM fill_cell USING l_h_cnt 1 1 text-011.
PERFORM fill_cell USING l_h_cnt 3 1 text-012.
Range for header
range_item-name = 'RANGE1'.
range_item-rows = '7'.
range_item-columns = '3'.
range_item-code = g_handle->spreadsheet_insertall.
APPEND range_item TO range_list.
CALL METHOD g_handle->set_selection
EXPORTING
left = 1
top = 1
rows = 7
columns = 3
IMPORTING
retcode = retcode.
CALL METHOD g_handle->insert_range
EXPORTING
columns = 3
rows = 7
name = 'RANGE1'
IMPORTING
retcode = retcode.
CALL METHOD g_handle->set_ranges_data
EXPORTING
ranges = range_list
contents = gt_cell_data
IMPORTING
retcode = retcode.
Columns for PC
CLEAR: gt_cell_data[].
l_pc_cnt = l_h_cnt + 1.
LOOP AT lt_dfies INTO lwa_dfies.
IF lwa_dfies-fieldname EQ 'SBWHR' OR
lwa_dfies-fieldname CP '_PC'.
PERFORM fill_cell USING l_pc_cnt 1 0 lwa_dfies-scrtext_m.
l_pc_cnt = l_pc_cnt + 1.
ENDIF.
ENDLOOP.
Pos Curr - Values
PERFORM fill_cell USING 9 2 0 trls_position_value-sbwhr.
PERFORM fill_cell USING 10 2 0 trls_position_value-purch_pc.
PERFORM fill_cell USING 11 2 0 trls_position_value-charge_pc.
PERFORM fill_cell USING 12 2 0 trls_position_value-impmnt_pc.
PERFORM fill_cell USING 13 2 0 trls_position_value-amort_pc.
PERFORM fill_cell USING 14 2 0 trls_position_value-val_ti_pc.
PERFORM fill_cell USING 15 2 0 trls_position_value-val_idx_pc.
PERFORM fill_cell USING 16 2 0 trls_position_value-val_ch_ti_pc.
PERFORM fill_cell USING 17 2 0 trls_position_value-val_ti_npl_pc.
PERFORM fill_cell USING 18 2 0 trls_position_value-val_idx_npl_pc.
PERFORM fill_cell USING 19 2 0 trls_position_value-val_ch_ti_npl_pc.
PERFORM fill_cell USING 20 2 0 trls_position_value-book_val_pc.
Columns for VC
l_vc_cnt = l_h_cnt + 1.
LOOP AT lt_dfies INTO lwa_dfies.
IF lwa_dfies-fieldname EQ 'SBWHR' OR
lwa_dfies-fieldname CP '_VC'.
PERFORM fill_cell USING l_vc_cnt 3 0 lwa_dfies-scrtext_m.
l_vc_cnt = l_vc_cnt + 1.
ENDIF.
ENDLOOP.
Val Curr
PERFORM fill_cell USING 9 4 0 trls_position_value-svwhr.
PERFORM fill_cell USING 10 4 0 trls_position_value-purch_vc.
PERFORM fill_cell USING 11 4 0 trls_position_value-charge_vc.
PERFORM fill_cell USING 12 4 0 trls_position_value-impmnt_vc.
PERFORM fill_cell USING 13 4 0 trls_position_value-amort_vc.
PERFORM fill_cell USING 14 4 0 trls_position_value-val_ti_vc.
PERFORM fill_cell USING 15 4 0 trls_position_value-val_fx_vc.
PERFORM fill_cell USING 16 4 0 trls_position_value-val_idx_vc.
PERFORM fill_cell USING 17 4 0 trls_position_value-val_ch_ti_vc.
PERFORM fill_cell USING 18 4 0 trls_position_value-val_ch_fx_vc.
PERFORM fill_cell USING 19 4 0 trls_position_value-val_fx_npl_vc.
PERFORM fill_cell USING 20 4 0 trls_position_value-val_ti_npl_vc.
PERFORM fill_cell USING 21 4 0 trls_position_value-val_idx_npl_vc.
PERFORM fill_cell USING 22 4 0 trls_position_value-val_ch_ti_npl_vc.
PERFORM fill_cell USING 23 4 0 trls_position_value-val_ch_fx_npl_vc.
PERFORM fill_cell USING 24 4 0 trls_position_value-book_val_vc.
Range for PC and VC
CLEAR: range_list[].
range_item-name = 'RANGE2'.
range_item-rows = '17'.
range_item-columns = '4'.
range_item-code = g_handle->spreadsheet_insertall.
APPEND range_item TO range_list.
CALL METHOD g_handle->set_selection
EXPORTING
left = 1
top = 9
rows = 17
columns = 4
IMPORTING
retcode = retcode.
CALL METHOD g_handle->insert_range
EXPORTING
columns = 4
rows = 17
name = 'RANGE2'
IMPORTING
retcode = retcode.
CALL METHOD g_handle->set_ranges_data
EXPORTING
ranges = range_list
contents = gt_cell_data
IMPORTING
retcode = retcode.
***********************************Form routine****************
FORM fill_cell USING i j bold val.
DATA:
wa_cell_data TYPE soi_generic_item.
wa_cell_data-row = i.
wa_cell_data-column = j.
wa_cell_data-value = val.
APPEND wa_cell_data TO gt_cell_data.
ENDFORM. "FILL_CELLSolved
-
How to download data from itab to Excel sheet..
Hi sap Experts,
I develop one report to download data from itab to excel sheet.I done it perfectly.
My doubt is in the excel sheet i need to put headings. and also at last i need to display total no.of Records.
Please help me how to do this.
Thanks in Advance....
Thanks and Regards
Siri.......................u can either use GUI_DOWNLOAD or the method below...just give a try
DATA:WK_string TYPE STRING.
DATA:Wk_EXT(4) TYPE C value '.xls'.
DATA:WK_path TYPE STRING.
DATA:wk_file_name type string.
data:wk_records type sy-tfill.
wk_file_name = 'Downloaded'.
describe table itab lines wk_records.
LOOP AT ITAB.
at first.
**Provide path
concatenate 'C:\' wk_file_name Wk_EXT into wk_path.
open dataset WK_path for output in text mode encoding default.
if sy-subrc 0.
write:'ERROR while opening dataset !!!!!!'.
EXIT.
endif.
CONDENSE wk_path.
**Heading Part
concatenate 'Part No' 'Description'
into wk_string separated by cl_abap_char_utilities=>horizontal_tab.
endat.
**Data ITAB
CONCATENATE ITAB-MATNR itab-maktx into wk_string
separated by cl_abap_char_utilities=>horizontal_tab.
transfer wk_string to WK_path.
at last.
clear wk_string.
Concatenate 'Records Passed:' wk_string into wk_string.
transfer wk_string to WK_path.
close dataset WK_path.
endat.
endloop. -
Error in importing data from multiple ASCii files, Concatenat​e
I am trying to use the "Importing Data From Multiple ASCII FIles.VBS" and the "Concatenate Groups.VBS" scripts downloaded from here, http://zone.ni.com/devzone/cda/epd/p/id/3870. When I run the importing data script and test it by highlighting the example data that comes with the download I get an error. "Error in <Importing Data From Multiple ASCII Files.VBS> (Line:60, Column: 11): Variabls is undefined: 'AscIIAssocSet' "
The offending line of code is " Call AsciiAssocSet(FilePaths(i), StpFilePath) ' assign STP file "
Screenshots of the error are attached.
Can anyone tell me what this error is? Am I just doing something wrong? Getting quite frustrated.
Thanks in advance.
Attachments:
concactenate1.png 261 KB
concactenate2.png 243 KBPlease have a look at the DIAdem Example to concanate channels. Its delivered with DIAdem.
Examples > Creating Scripts > Scripts > Appending Channels to Each Other
Please use a dataplugin (File -> Text DataPlugin Wizard...) or the csv plugin to load your data.
Greetings
Andreas
P.S.: The one you have downloaded needs the old Ascii Wizard that is not activated by default in newer DIAdem versions.
If you want to use it anyway:
Settings -> Options -> Extensions -> GPI Extensions ...
Add gfsasci.dll -
Download data from ECC6.0 to CRM
We want to download data from ECC6.0 to CRM 2.0.
I am facing an error while trying to use Function module 'SMW_CALL_MIDDLEWARE'
to create and post BDOCS in CRM 2.0.
The BDOCs are getting posted successfully. However, function module is updating
only SMO* ( Mapping) tables but not the CRM database tables. Does anyone has any suggestion on this.I think your corresponding mobile bridge needs to be properly active. That should take care of posting data from CDB to CRM.
-
Error while updating data from PSA to ODS
Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo -
Error while selecting date from external table
Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2 SE_CUST_ID NUMBER(38),
3 SE_TRAN_AMT_LCY FLOAT(126),
4 SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6 TYPE ORACLE_LOADER
7 DEFAULT DIRECTORY ext_tables
8 ACCESS PARAMETERS (
9 RECORDS DELIMITED BY NEWLINE
10 FIELDS TERMINATED BY ','
11 MISSING FIELD VALUES ARE NULL
12 (
13 country_code CHAR(5),
14 country_name CHAR(50),
15 country_language CHAR(50)
16 )
17 )
18 LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell -- -
DB Connect Load - "Unknow error while uploading data from the DB Table"
Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
AbhijitHi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait -
Download data from interactive report
Hi all. I'm on apex 3.1.1.00.09.
I have this problem: when I download data from interactive report I can download only in CSV and PDF. If I try to download into pdf it creates a file of only 1 KB.
I would know if I must configure my apex in order to download correctly in pdf and if I must configure it in order to download in doc and xls format.
Thanks all for collaboration,
FabrizioThank you for your reply.
I am able to download the csv file, but my problem is: I don't want the column headings to show.
Is it possible to download only the data, not the column headings? -
How to download data from a an external hard drive ?j
How to download data from an external hd ?
You need to copy the data onto your computer and transfer it via that (either via iTunes, or if the app that you want to transfer the data to supports, via wifi). Like the previous reply said, you can't do it directly without a computer being involved.
-
Error while sending data from XI to BI System
Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
NarendraHi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal
Maybe you are looking for
-
How do I convert an excel file to a pdf, NOT a pdf to excel
Until this year, I've been running OSX 10.5 Leopard. When I wanted to convert a Microsoft for Mac Excel worksheet to a pdf file, I simply clicked File/Print/PDF (in the lower left corner of the dialogue box)/then, Save as pdf. No problem, perfect pdf
-
Printing saved to memory_print at a later moment
I need to print a lot of documents for record keeping, and sometimes I am somewhere in which my printer isn't available. Is there a way or an application to handle saving printouts in a memory, to which I could later then execute a physical printing
-
Hi, I successfully installed the TODO-Tutorial of the WebToGo-Manual on a Win32 machine. Now, I want to install it on my PocketPC 2002. When I connect to http://ip-adress/webtogo/index.html the login-site appears the Pocket Internet Explorer shows th
-
Hi all, Hoping you can help me with my SQL query. I want to do a simple LEFT JOIN between two tables...fair enough right? Yeah, well, it works and all rows are returned from the LEFT table even if there are nmo matching rows in the RIGHT table. BUT,
-
Hi, I am new to Webdynpro abap. while creating Dynamic node with passing input value am getting error ' Adapter error in &VIEW_ELEMENT_TYPE& "INPUT1" of view "ZKI_WEB_DEMO21.MAIN": Context binding of property VALUE cannot be resolved: Node MAI