Error in dso

Hi  to all,  actually iam new to bi . Igot a prob in dso . I gave selections on infoobject  to extract data from 19 -12-20007 to 19-12-9999 .BUT  it  shows the 2006 data also this is correct /wrong  in case itis wrong plz help to me 
thnxs
satish

Hi Satish,
   Check what data is being fetched in the PSA for your request. You may be looking at all the data and this brings up 2006 data as well. While looking at the data in the DSO/ODS, ensure that you give request number that you have loaded.
   If you have not provided any request number then what you are looking at may be correct.
Best regards,
Kazmi.

Similar Messages

  • Facing the error in DSO.

    Hi Experts,
      I am getting error in standard DSO while activating the active data facing the error like below.
    please let me know if you have any one idea about this error.
    thanks,
    kavya.

    Hi ,
    Is 30,40  a valid  currency ? I don't think so !! Currency will be USD, INR, CAD something like that .
    If it is not a valid currency  then you can try correcting the data at  PSA and also inform the business to correct at the source transaction.
    If yes(valid) then try to transfer the currency from the source system as follows
    Go to the source system->right click->transfer global settings.... Select Currencies and then select Update and then execute it, and then load the Data.
    Also please be informed that the infoobject 0LOC_CURRC2 refers to 0CURRENCY infoobject .
    Hope this helps...
    Regards .

  • Error trasnporting DSOs into production

    Hi experts
    I'm transporting all my objects to production systems.. These are the initial transports, as we still haven't got anything in BW Prd.
    The transports have been working ok.., except transports of DSO. All flows that don't have DSO are transported with no issue.. All flows with DSO's have issues.
    Regarding the ones with issues, I've tried to transport many different ways, just the DSO, The dso with bellow flow, the DSO with bellow and after flow.. and all of them finish with error
    DataSource 8* does not exist in source system BWPRD of versionA
    Error when creating the export datasource and dependent objects
    Error when activating the DSO.
    I've searched for similar problems in the web, and it seems that the BW my system connection shouln't be working fine (or working at all). This is consistent with the fact that transports that don't envolve BW connection to itself, are going throgh.
    My issue is I'm working on this alone, and i don't have any BASIS available..
    Can anyone provide some clarity on this type of connection? What should i be looking for?
    I've gone to TCODE SM59, but i don't know what i should be looking for.
    Can anyone help?
    Many thanks
    Joana

    Hi Joana
    RSA1->Source System>MySap connection->Right Click-->Restore
    Keep BW system open and modifiable while doing this.
    SE06---->System Change Option -
    > Edit -
    >Software Comp modifiable
    > Namespace modifiable
    SCC4 --->Click on BW Client --->Changes to Repos and cross-client customizing allowed under cross client object changes
    > Protection level zero
    Also keep ready your background user id password ready in case they are maintained incorrectly in SM59
    Edited by: Anindya Bose on Feb 16, 2012 8:38 PM

  • Error with DSO

    Error with the Profit Center Accounting loads for DSO . The data load from the datasource 0EC_PCA_1 remains in the 'In Progress' state for prolonged duration. Although the data is updated in the DSO, the Extraction status remains 'In Progress'.
    As a temporary fix, the request was 'forced green' and activated. The data has also been updated in the subsequent data target.
    Do this forced green activation affect the reporting capability of my records???

    hi,
    Just check the Records which are updated in your DSO.
    If the records in the DSO are coming correct, this won't effect your reporting part.
    thanks

  • No fiscal year variant specified - error upon DSO activation

    In my DSO I need 2 fiscal periods - document day period and payment day period. For the first I use 0FISCPER IObj, for the second I've created CFISCPER (with a reference characteristic 0FISCPER).
    CFISCPER has 0FISCVARNT as compounding.
    There some occasions then I got payment date, but no document date (prepayment cases). As a result I got NULL value on 0FISCVARNT and error "No fiscal year variant specified" upon activation.
    I've tried to create CFISVAR (with a 0FISCVARNT as reference characteristic) but BI doesn't let me switch  0FISCVARNT to CFISVAR in compounding for CFISCPER.
    How can I deal this? Maybe there is some option in DSO?
    thanx in advance. points will be awarded

    Hello,
    If you have create payment day period(CFISCPER) as a reference to 0FISCPER, then Fiscal year variant's infomation must be provided.
    you can fixed the 0FISCVARNT for the case of no document date using a formula in the transformation,
    eg. IF(0FISCVARNT<>'',0FISCVARNT,'K4')
    hope it can help.
    regards,
    K

  • Error in DSO activation

    HI Guys,
    I ran a DTP to transfer data to a DSO (Data target) from R/3. The DTP works fine but when i try to activate the DSO, i get an error (red light). There is no error message or any clue. When i look in the monitor, it shows me all green lights. Where is my error? Is there any way I can debug the activation process?
    Thanks & points will be given,
    SD

    Hi Sebastian,
    did you check the application log? You can go there by managing the dso, clicking on activation and in that popup, there is a button for logs. Another way: slg1, object rssm, subobject mon and external identifier ODSAC<name of your dso>*.
    Additionally a look at st22, sm37 and/or sm21 might also be of some help.
    regards
    Siggi

  • Hexadecimal error during activation of DSO from datasource

    hi guys,
    im facing this error during DSO data activation:
    Value '"1st anniversary,birthday & staff party"' (hex. '2200310073007400200061006E006E00690076006500720073') of characteristic ZTXOSIK1 contains invalid characters
    is there any routine that i can put in transformation to fix this error.. please advice.

    Hi,
    Long back i faced this Hex Values issue, i used the below code in  the charecterictic routine of transforamtions
    my source field was: TXZ01
    my target infoObject was : ZMAT_TXT
    please find the code below which i used, first read it and do the needful changes as per your requirement
    FIELD-SYMBOLS: <ic> TYPE x.
        DATA: hex_count  LENGTH 2 TYPE n.
        DATA: char_count LENGTH 2 TYPE n.
        DATA: x8         LENGTH 2 TYPE x.
        DATA:
        hex1(64) TYPE x VALUE
    '00000020000100200002002000030020000400200005002000060020000700200008'
    '002000090020000A0020000B0020000C0020000D0020000E0020000F0020',
        hex2(64) TYPE x VALUE
    '00100020001100200012002000130020001400200015002000160020001700200018'
    '002000190020001A0020001B0020001C0020001D0020001E0020001F0020'.
        IF SOURCE_FIELDS-txz01 = ' '.
          RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
        ENDIF.
        RESULT = SOURCE_FIELDS-txz01.
        hex_count = 0.
        char_count = 0.
    0000---001F
        ASSIGN RESULT TO <ic> CASTING TYPE x.
        DO.
          MOVE <ic>+hex_count(2) TO x8.
          SEARCH hex1 FOR x8 IN Byte MODE.
          IF sy-subrc <> 0.
            SEARCH hex2 FOR x8 IN BYTE MODE.
            IF sy-subrc = 0.
              result+char_count(1) = ' '.
            ENDIF.
          ELSE.
            result+char_count(1) = ' '.
          ENDIF.
          IF hex_count < 78.
            ADD 2 TO hex_count.
          ENDIF.
          ADD 1 TO char_count.
          IF char_count >= 40.
            EXIT.
          ENDIF.
        ENDDO.
    Regards
    Reddy A

  • Activation of DSO failed

    Hi Team,
                  After loading the data to DSO and Activating i find the following error.The DSO is activated.There is data in New table and error occurs while activating.
    The Errors are:
    1.DSO ZPF_O07 is inconsistent; request DTPR_4IA4N9BCL2ENOIICW4PFEOCOJ only exists in RSODSACTREQ
    2.Activation of M records from DataStore object ZPF_O07 terminated.
    Can you please help me out in finding the appropriate solution for the same.This is in Production system.
    Thanks & Regards,
    Pradeep P.

    Hi Somu,
    Go to the table RSODSACTREQ and filter the Request id values with DTPR_4I*.Delete this entry from the table if you have authorizations to access.If not request the basis team to do this.
    Once the table entry is deleted ,try the activation again on the ODS with single request id.
    Regards
    KP

  • ThreadDeath Error

    Hi,
    My program works fine initially, but it encounters the following error after running the program for sometime. It can occur at any time and page, thus cannot be predicted.
    My program is actually of j2ee structure where it will read from a .txt file and populate the contents into a jsp. Opened quite a number of files in a single page. Dunno if thats the caused of the problem.
    Can someone advise me what caused the error or how shld i go abt resolving it...
    Thanks ALOT!!!
    ERROR com.dso.businessDelegate.FileReader - CORBA UNKNOWN 1398079690 Maybe; nested exception is:
         org.omg.CORBA.UNKNOWN: ----------BEGIN server-side stack trace----------
    org.omg.CORBA.UNKNOWN: vmcid: SUN minor code: 202 completed: Maybe
         at com.sun.corba.ee.impl.logging.ORBUtilSystemException.runtimeexception(ORBUtilSystemException.java:8539)
         at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.convertThrowableToSystemException(CorbaMessageMediatorImpl.java:1947)
         at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleThrowableDuringServerDispatch(CorbaMessageMediatorImpl.java:1897)
         at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleThrowableDuringServerDispatch(CorbaMessageMediatorImpl.java:1850)
         at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:261)
         at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1709)
         at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1569)
         at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:951)
         at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
         at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:721)
         at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:473)
         at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1262)
         at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:409)
    Caused by: java.lang.InternalError: Error loading com.sun.corba.ee.impl.io.IIOPOutputStream
         at com.sun.corba.ee.impl.io.ValueHandlerImpl$StreamFactory.run(ValueHandlerImpl.java:844)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sun.corba.ee.impl.io.ValueHandlerImpl.createOutputStream(ValueHandlerImpl.java:800)
         at com.sun.corba.ee.impl.io.ValueHandlerImpl.writeValueWithVersion(ValueHandlerImpl.java:199)
         at com.sun.corba.ee.impl.io.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:147)
         at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.writeRMIIIOPValueType(CDROutputStream_1_0.java:801)
         at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.write_value(CDROutputStream_1_0.java:850)
         at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.write_value(CDROutputStream_1_0.java:864)
         at com.sun.corba.ee.impl.encoding.CDROutputStream_1_0.write_value(CDROutputStream_1_0.java:659)
         at com.sun.corba.ee.impl.encoding.CDROutputStream.write_value(CDROutputStream.java:246)
         at com.sun.corba.ee.impl.presentation.rmi.DynamicMethodMarshallerImpl$14.write(DynamicMethodMarshallerImpl.java:338)
         at com.sun.corba.ee.impl.presentation.rmi.DynamicMethodMarshallerImpl.writeResult(DynamicMethodMarshallerImpl.java:430)
         at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:127)
         at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:648)
         at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:192)
         ... 8 more
    Caused by: java.lang.ThreadDeath
         at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1274)
         at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1234)
         at com.sun.corba.ee.impl.orbutil.ORBClassLoader.loadClass(ORBClassLoader.java:20)
         at com.sun.corba.ee.impl.io.ValueHandlerImpl$StreamFactory.run(ValueHandlerImpl.java:838)
         ... 22 more
    ----------END server-side stack trace---------- vmcid: SUN minor code: 202 completed: MaybeRemoteException while opening file

    I am seeing the exact same problem, intermittently, when I do a remote ejb lookup. If anyone found the answer to this, it would be much appreciated.

  • Getting Shor Dump while DSO Activation

    Hi Experts,
    I am getting Error while DSO Activation, I checked in ST22 Error is (SYSTEM_CORE_DUMPED), Please suggest me.
    Category               Internal Kernel Error
    Runtime Errors         SYSTEM_CORE_DUMPED
    Date and Time          25.02.2014 18:38:47
    Short Text
         Process terminated by signal 10.
    What happened?
         Error in the SAP kernel
         The current ABAP program "CL_RSODSO_DATASTORE=====
          terminated because the ABAP
         processor detected a system error.
    Thanks
    Sunil

    Hi,
    Take basis team help. error itself saying as related to internal kernel error.
    recently any changes were applied on server? if yes then those might be causing.
    please refer note - 517824.
    Inform to basis team and sort it out.
    Thanks

  • Getting Short Dump while DSO Activation

    Hi,
    I am getting Error while DSO Activation, I checked in ST22 Error is (SYSTEM_CORE_DUMPED), Please suggest.
    The kernel is latest version.
    Also we had implemented a couple of SAP Notes while we searched on the SDN and service market place. But still no luck.
    Category Internal Kernel Error
    Runtime Errors SYSTEM_CORE_DUMPED
    Date and Time          09.04.2014 16:14:13
    Short Text
    Process terminated by signal 10.
    What happened?
    Error in the SAP kernel
    The current ABAP program
    "CL_RSODSO_DATASTORE=====
    terminated because the ABAP
    processor detected a system error.
    Thanks,
    Sameer

    Hi,
    Yes this happens for a particular DSO only - 0FIAR_O03(DSO)
    Also the kernel is the latest one.
    I am from Basis. I have checked all the possibilities and have raised OSS message as well.
    Thanks,
    Sameer

  • DBIF_DSQL2_DEFAULT_CR_ERROR

    Hi All,
    While activating the DSO, Activation job failed with below message..
    " ABAP/4 processor: DBIF_DSQL2_DEFAULT_CR_ERROR
    Job cancelled
    did anyone encountered such error in DSO activation..Please help..
    Thanks,
    Raman

    Yes, This happends during the request activation in the Data store and this is because of the incorrect records.
    Please look into SM37 logs and there you will find the object for which you have the incorrect records.
    Go to the PSA and edit the incorrect records and load again and activate it.
    This should work fine.... I hope this would resolve this issue...If you have any questions please let me know..
    Cheers..

  • Loading data - NO_DBROUTID_FOUND

    Hello,
    I am actually trying to load data to an Infoprovider (Cubde or DTP), but unfortunatelly the system raises the follow exception:
    A RAISE statement in the program "SAPLRSDGUTILITIES" raised the exceptioz condition "NO_DBROUTID_FOUND".
    RAISE_EXCEPTION" " "                    
    SAPLRSDGUTILITIES" or "LRSDGUTILITIESU03"
    RSDG_ROUTINES_PROGRAM_GET"     
    I have check for simillar error in the OSS note, but I have found dothing.
    Any idea what could be?
    Best regards
    Sérgio Pinto

    Hi,
    Chk this link
    SID Generation Error in DSO used in Process Chain
    rgds,

  • Webtogo with Apache Server

    Hi,
    I've already installed Oracle Webtogo Server on my machine with Apache server.
    My webtogo server runs on 80 port and Apache server on 90 port.
    I would like configuring the webtogo module on the Apache server.
    I've put the following line in apache's httpd.conf's file:
    LoadModule WTG_Module
    OracleHome\webtogo\bin\wtgapach.dll
    <Location /webtogo>
    SetHandler web-to-go
    </Location>
    I've stopped the server and reloaded, but i've gotten this error:
    Loaded DSO <dll's path> use plain Apache 1.3 API, this module might crash under EAPI, please recompile it with -DEAPI.
    I don't understand the meaning of RECOMPILE WITH -DEAPI.
    Best regards,
    Simone
    null

    Hi Guys,
    I didnt check this from past one month, thanks all for your replies
    I found solution for this in metalink
    i.e.
    in context file
    <directory_index oa_var="s_directory_index">index.jsp index.html</directory_index>
    change this to
    <directory_index oa_var="s_directory_index">index.html</directory_index>
    and run autoconfig
    and restart apache server
    Thanks,
    Bhanu Chander

  • Error while editing a dso in prod

    Hi experts,
    Hi am facing the following error when tried to change an dso.
    =============
    Error in object editing.
    Package ZBI_NEW does not exist
    Choose 'Display object' or 'Cancel'.
    Message no. TR414
    ==============
    How can we resolve this and edit the dso ?
    Regards,
    Nishuv.

    Hi,
    I think, Package ZBI_NEW  is a custom development package: probably someone else already transported the application component hierarchy and assigned this package...try to change this. Chk with SE80 > package > ZBI_NEW,If it is not there,create it.
    But the normal practice is change/Edit DSO in DEV-->Quality , then transport to Production.(SE80
    In the drop down, look for Packages,below it type ZBI_* and hit Open.If you don't see ZBI_NEW, then ask BASIS to Create (DEV)and import that Package to QAS->Production)
    Regards
    CSM Reddy

Maybe you are looking for

  • Error in invoking target 'install' of makefile

    Dear all, When I install EM12C then I got this error is "Error in invoking target 'install' of makefile". Please help me to solve this error. INFO: /usr/bin/ld: cannot find -lclntsh collect2: ld returned 1 exit status INFO: make[1]: Leaving directory

  • Why is there extra white space at the top of swf file?

    I can't figure out how to get rid of extra white space in the browser at the top of a swf file. It looks fine when I preview the file, but when I do publish preview in flash/ try to incorporate in HTML, there's an extra 1/4" at top of window.

  • Change the mapping generation code from sql*loader to pl/sql

    I want to use a mapping with a flat file operator to generate pl/sql code even if a mapping generate sql*loader code as default. I tried to change the Language generation property of the mapping but an API8548 error message is shown. The suggested so

  • My Photoshop Elements 11 has suddenly started crashing every time I try to open it.

    I've tried repairing the catalog and I'm told alternately that it doesn't need to be repaired and that it can't be repaired.  I've tried to create a new one, but the program still crashes when I open it.

  • Problem in merep_mon: Record not on Device

    Hi Gurus, I am getting an error "Record not on Device" in merep_mon while monitoring S01 SyncBo. I have checked earlier posts and they doesnt seem to be providing a proper solution to this issue. Someone Please explain me the cause of this error with