Error in DTP Monitor (DSO)

Hello,
After executing a DTP (DSO --> DSO), all DataPackets are green except the last one which which contains a yellow traingle saying "Information Missing: Begining of Extraction" and similarly "Information Missing: Ending of Extraction". As a result, I cannot activate my DSO.
Pls help.
Points will be awarded!!
SD

Hi,
this means the last request is not completed yet. please check in the source DSO if all the Requests are active. in the yellow status DSO please check if there are any records transfered at all? and please see the message of status, if it says in source system or activating request or any other message.
also check in sm37 if this job is still running and check the log u might get a clue
Regards
GC

Similar Messages

Error in DTP?

Hi Gurus,
I am trying to load the data from data source 2lis_03_BX to DSO(Write
optimized DSO: Z_DSO_BX). Data is in the data source(Checked in extract
checker and in PSA).
Created Transformations in DSO and DTP is scheduled.In DTP Monitor--> process request it showed as below
X Data Package : Errors During Processing
expanding this Data Package,
-Extraction Data source 2lis_03_BX:102Data Records
     -prepare for extraction
     -Beginning extraction request REQU_D3HSSOSMZIQMOV....
     -Extraction completed
-Filter Out New Records with the same key:...
     -starting processing..
     -102 records received; 102 records forwarded
-RSDS 2lis_03_Bx EI3R3IDES>ODSO Z_DSO_BX: 102>102Data records
     - Transformation start
     - rules
     - Transformation End
X Update to Data source Object Z_DSO_BX
     - Unpack Data Package
     X exceptions in substep: Write Data Package
     X Messages for 102 data records saved: request is red acc. to configuration
     X Processing terminated
NOTE:- indicates green; X indicates red in the process
1. Are the transformations wrong (after activating I got message "transformations activated successfully")
2. Is this an Error while scheduling in DTP? if so How to debug this(Tried deleting the request and uploading new request)
3.Problem with Service pack?
Please help to load the data in the DSO...

Hi,
I changed the write optimized DSO to standard DSO and tried loading the DATA through DTP. This time it is showing green color and showing Data has been loaded to target (i.e., DSO).
But when I tried to see the data (we need to enter atleast one parameter in order to see the contents in the active table right? Tried giving almost all the parameters one each time) I am getting a message Specific entries not found in Table
My question is How to see the whole data in DSO with or with out giving parameters (Key fields like MATNR)?
Why there is SQL error while trying with DSO? Did u face this Problem any time?
Thanks in advance...

Issue for DTP from DSO to open hub destination

Hello Gurus,
        I have a issue for DTP from DSO to open hub destination, long text for error in the monitor is as follows:
          " Could not open file
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr_2 on application server"
          " Error while updating to target ZFIGLH03 (type Open Hub Destination)     "
      for open hub destination, I check the configure for logical file name , which is "
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr",
I am wondering where that file "
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr_2" in the error message comes from?
Many thanks,

Hi
You do not need to create a file in application server. It will be created automatically.
But if you have defined a logical file name in tcode FILE and used that in OHD and if it is not correct then it will show a conflict. Check this out.

Errors in DTP

Hello All,
I am facing the following errors while running DTP from DSO-DSO.
1.    Update terminated in accordance with error handling setting
       Message no. RSM2715
2.    Overflow in the operation +
        Message no. RS_EXCEPTION000
3.     An exception has occurred
        Message no. SY530
4.     Error in substep
       Message no. RSBK231
5.   Update terminated in accordance with error handling setting
Message no. RSM2715
Please let me know how to resolve this issue.
Regards,
Priya.

Hi Priyadarshini,
1)Try the debugging mode in DTP. This might help you in finding out the error data record.
2)run the DTP by selecting "vilid records update, No reporting". this may some times collect the error record in Error stack and update the remaining records.
If any error record is collected, then you can go edit the record and run error DTP.
Hope this solves your problem.
Regards,
Srinath.

Error activating DTP

Hello Gurus,
I was creating a DTP in my quality box. Couple of weeks back, one of my team members could successfully create and activate.
Now, I cant. Each time I try to activate, it gives the error,
**Error from PSA****
Looking for PSA table/BIC/B*****601
Although the PSA table actually is /BIC/B*****588
have u faced this already?
Prakash

I am facing the same error while activating the DTP from DSO to CUBE. Was this issue resolved in your case?
regards,
R$

System error in message monitoring

Hello,
Scenario is proxy to database. Status seems to sytem error in message monitoring. Error detail is In audit log of message details as belows:
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'If_test ' (structure 'STATEMENT'): java.sql.SQLException: ORA-00936: missing expression
I should resent this message content. When i press Resend tab in message monitoring, error status is not being changed.
Thanks in advance

Hi,
Check the payload received is correct or not in this case ...
Take payload and check at mapping level...
if you are using insert or update statement you can enable log at the receiver jdbc channel in advance mode(logSQLStaement to true) to see how the statement is getting framed ...
HTH
Rajesh

System Error in Message Monitoring while it shows checked flag in SXMB_MONI

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
(ECC -> PI -> Legacy CRM)
I have following queries:
1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
Regards

System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
2010-05-10 13:15:05     Information     SOAP: completed the processing
2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
2010-05-10 13:15:06     Error     The message status was set to FAIL.
I have already checked Data Structure and it is fine.
Regards
In this scenarios we are using XSLT mapping using CDATA.
Please suggest solution.

System Error in Message Monitoring -Proxy to SOAP async scenario

Hi All,
My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
but in related Soap Receiver communication channel i can see the below Error
"2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
Please help , what could be the problem.
Thanks in Advance.
Jyoti

Hi Jyoti,
>Is there any specific setup required at Provide side while moving to Acceptance system
I dont think so.
Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
Regards,
Udo

Error in message monitoring while creating new record in R/3

Hi All,
I am getting the following error in message monitoring while creating a new record from SAP Mobile client.
Service name: Validation_Service
Message: BackendKeys are not filled in table HEADER returned by getDetails
I am passing some random number from Client to SAP R/3 create function module.
When i pass the same value in create FM as in message monitoring. I am able to create the record successfully,
Corresponding to newly created record, i can see the data in getdetail header also.
Not sure why this error is coming.
Appreciate your help!!
Thanks & Regards
Devendra

The CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
i.e. the CREATE signature is usually something like:
CREATE_BLAH
IMPORTING header TYPE header_row
EXPORTING key type header_row-key_field.
So the 'key' here should be filled by the FM and returned to DOE.

Wrong port in FTP receiver adapter - no errors in message monitoring?

Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
Renaud

Hi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud

Error in Component Monitoring(Runtime Workbench)

Hi,
I am getting an error in component monitoring section of runtime workbench. I got a note(851711), where it says 'CompilingException' error can be corrected by applying SP14. But I am still getting same error after applying SP14 and redeploying XI ADAPTER FRAMEWORK CORE 3.0 (SAPXIAFC.sca), XI TOOLS 3.0 (SAPXITOOL.sca) and XI ADAPTER FRAMEWORK 3.0 (SAPXIAF.sca). Please advice how to correct this error.
Error Message:
com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:27: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) import com.sapportals.htmlb.enum.TableCellStyle; ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:947: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.setColumnType(com.sapportals.htmlb.enum.TableColumnType.IMAGELINK, 1); ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:948: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.getColumn(1).setCellHAlignment(-1, com.sapportals.htmlb.enum.CellHAlign.CENTER); ^ 3 errors .
Thanks,
Ask.

Hi,
it can be for some system configured on http destination or the sld system configured for this server.
take a look at tx sxmb_adm for the http destination to discover witch destination is been used. then, on sm59, find the server that is been called for this http destination and check on that server if this user is ok there.
to check sld, go to tx sld_apicust discover witch is the sld system configured for this server. After log on to sld system and check the user.
Maybe the user is ok on the destination system, so, check the password on sm59 (if the problem is with an http dest) or sld_apicust (if the problem is the connection to sld).
regards.
roberti

"Error in message monitoring in runtime workbench"

Hello All,
I have an error in message monitoring in runtime workbench.
We have installed PI7.0 and it should run on port 50000.But it is running on port 50100.
Please suggest what are the steps involved to resolve this problem.
Thanks and Regards
SAN
null
k san

San,
Can you please copy / paste error message.
Also check if you have set correct port in Exchange profile under Runtimeworkbench.
Nilesh

ABAP programming Error in DTP execution

Hi
When execute DTP on InfoCube it generate following error after approx 10 to 15 minutes:
ABAP programming Error in DTP execution
Screen Shot also attached.
In PSA is shows all records OK (30 records)
What is the solutions?

Hi Imran,
Good to knew you got resolution for this issue.
If you are getting output from above replies mark the correct or helpful answers. So that it will be helpful if some one faces the same issue again. http://scn.sap.com/docs/DOC-46006. You marked your answer as correct now.

ERROR STOCK DTP IN BW 3.5 ?

HI all ,
how the error records are maintained in BW 3.5 as error srock DTP IN BI .
regards ,
srinivas .

3.x - You will have to delete the request from the target and Edit the records in PSA and then update to target
http://help.sap.com/saphelp_bw30b/helpdata/en/05/bb223905b61b0ae10000000a11402f/frameset.htm
Edited by: Srinivas on Aug 13, 2010 3:22 PM

Where do I find the DTP monitor?

Sorry for this beginner question, but I already checked the online docu, SDN forums and even the SAP press books about this. There are lots of references of the DTP monitor, but so far I couldn't find any information where to locate it. I already searched through transactions RSA1 and RSMO, but nowhere is a button or anything.
Is there a transaction or report which can be used to start the DTP monitor directly?
If not, how can a beginner like me (idiot proof) enter the DTP monitor?
Regards,
Mark

Thanks for your hints. After hours and hours of searching I found
at least a partial solution:
On BI 7.0 systems there is a transaction called RSDTP, here I finally found the DTP monitor.
Unfortunately there is also a BW 3.5 system where this useful transaction is missing.
Do you know how it is possible to start something like RSDTP on a BW 3.5 system?
An ABAP report name would be best, transaction RSA1 is very uncooperative in my case.
Regards,
Mark

Error in DTP Monitor (DSO)

Similar Messages

Maybe you are looking for