Error in DUET Configuration at SSL

Hi All,
As part of DUET Configuration, Iam facing an error at the SharePoint side
Error: "Could not establish trust relationship for the SSL/TLS secure channel with authority 'duetxyz:8001'"
Please look into this and provide me your valuable suggestions to solve.
Thanks & Regards,
Kris

Hi Holger,
Thanks for the reply.
Errors have been found when executing T.CODE  SRTUTIL --> Error log
-ERROR_CONTEXT   
--ERROR_INFO   
---EXCEPTION_INFO   
TYPE    /IWTNG/CX_RS_SAP_GLOBAL_MSGS
ERROR_TEXT    Application Error
CX_PROXY_INBOUND_APP_ERROR   
ERROR_PART   
>href    #o244
ID    APPLICATION_ERROR
RETRY_MODE    M
ERROR_CLASS_NAME    /IWTNG/CX_RS_SAP_GLOBAL_MSGS
--PROVIDER_INFO   
---INTERFACE_NAME    IWXRead_UserRoles_in
---INTERFACE_NAMESPACE    http://xiTest.com/xi/IWCNT
---PROVIDER_INTERFACE    /IWTNG/II_IWXREAD_USER_ROLES_I
---OPERATION_NAME    employeeGetAll
---OPERATION_NAMESPACE    http://xiTest.com/xi/IWCNT
---PROCESSING_UNIT    Sector 4: WS-Provider
---PROCESSING_MODE    Synchronous
---COMMUNICATION_TYPE    Remote
---WORK_PROCESS_NUMBER    7
---WORK_PROCESS_PID    2340
--REQUEST_INFO   
---PROTOCOL    HTTP/1.1
---REQUEST_URI    /sap/bc/srt/pm/iwtng/iwxread_userroles_in/400/duet_enterprise_saml/1/binding_t_https_a_wsse__-iwtng_-iwxread_userroles_in_duet_e
---REMOTE_ADDRESS    10.0.1.111
Thanks & Regards,
Kris

Similar Messages

  • ERROR While Configuring the SSL Key Pair SAP NW 7.3

    I am trying to create new key pair entry to use for SSL. I am getting weird error, after importing certificate response ssl-credential entry goes invalid.
    Below are list of step I carried prior getting error.
    1) Deleted existing Java key pair from existing view ICM_SSL_<Instance_ID>
    2) Generated new pair entry
    3) Generated certificate sign request.
    4) Sent to SAP CA at SAP Trust Center Service at service.sap.com/tcs.
    5) Import certificate request.
    And ssl-credential entry turns red , with error"This entry expired"
    Please see screenshot below

    I am trying to create new key pair entry to use for SSL. I am getting weird error, after importing certificate response ssl-credential entry goes invalid.
    Below are list of step I carried prior getting error.
    1) Deleted existing Java key pair from existing view ICM_SSL_<Instance_ID>
    2) Generated new pair entry
    3) Generated certificate sign request.
    4) Sent to SAP CA at SAP Trust Center Service at service.sap.com/tcs.
    5) Import certificate request.
    And ssl-credential entry turns red , with error"This entry expired"
    Please see screenshot below

  • A fatal error occurred while creating an SSL client credential. The internal error state is 10011.

    Need help.  I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client.  It just prompts for password but will not
    take it. I'm sseeing this on my front end server multiple times:
    A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
    Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
    All my certs are good coming from internal CA.  My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers.  Issue only occurs when trying to connect using a lync 2013 client.
    1 Login: FAIL (hr = 0x1) 
    this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
    1.1 Get-NewWebTicket: FAIL (hr = 0x1) 
    CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
    1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000) 
    Executing wws method with windows auth auth, asyncContext=0A4FC348,
     context: WebRequest context@ :173931816
      MethodType:4
      ExecutionComplete? :1
      Callback@ :0A5A1864
      AsyncHResult:80f10041
      TargetUri:https://domain.com/WebTicket/WebTicketService.svc
      OperationName:http://tempuri.org/:IWebTicketService
     Error:
    There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
    The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
    The requested resource requires user authentication.
    1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
    1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    Executing wws method with windows auth auth, asyncContext=0A4FC348,
     context: WebRequest context@ :173931816
      MethodType:4
      ExecutionComplete? :1
      Callback@ :0A5A1864
      AsyncHResult:80f10041
      TargetUri:https://domain.com/WebTicket/WebTicketService.svc
      OperationName:http://tempuri.org/:IWebTicketService
     Error:
    There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
    The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
    The requested resource requires user authentication.
    1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
    1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    Executing wws method with windows auth auth, asyncContext=0A4FC348,
     context: WebRequest context@ :173931816
      MethodType:4
      ExecutionComplete? :1
      Callback@ :0A5A1864
      AsyncHResult:80f10041
      TargetUri:https://domain.com/WebTicket/WebTicketService.svc
      OperationName:http://tempuri.org/:IWebTicketService
     Error:
    There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
    The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
    The requested resource requires user authentication.
    1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
    Rich

    Hi,
    Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
    For the detailed IIS configuration, please check:
    http://technet.microsoft.com/en-us/library/gg412871.aspx
    As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
    lyncdiscoverinternal.<sipdomain> Host (A) record and then
    lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
    More details:
    http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Configuration of SSL VPN in IOS-XE (Version 03.13.01.S)

    Hi,
    I am looking for some advice in regard to the configuration of SSL VPN in IOS-XE (Version 03.13.01.S).
    I have been following the Cisco Guide (http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_sslvpn/configuration/xe-3s/sec-conn-sslvpn-xe-3s-book.html#topic_D5CE388EB64446E0897B4741801C84A5) but I am not really having any luck.
    I am testing my config in my lab using a CSR1000V before putting it into the production box.
    When I try to fire up a https connection from a Windows client to the listening IP address in the router all what I get is a blank page (after clicking OK in the certficate error). In the virtual router though, I can see that the CRYPTO-SSL-WEBSERVICE is running, but I am not getting prompted with the page for me to enter the username and password.
    I am using a self signed certificate and AAA is using local authentication to authenticate my users.
    The version of the Anyconnect I am using is 3.1 for Windows, but I have not been to the point where the router pushes the Anyconnect software to the client.
    The Windows host is running the latest version of Java (Version 8 Update 31).
    I have to be honest and admit that this is not my area of expertise. Therefore, I am afraid I have some very silly questions such as what sort of webpage I should be getting when starting a https section to the router. Is it a default one?
    I have not been able to find any real examples on the web and that's why I decided to reach out to you guys for help. Could you please have a look at my config and shed some light about why this is not working?
    I created the annyconect.xml profile file using the Anyconnect Profile Editor.
    CSR_1000V_VPN#sh debugging 
    IOSXE Conditional Debug Configs:
    Conditional Debug Global State: Stop
    IOSXE Packet Tracing Configs: 
    Crypto SSL Subsystem:
      Crypto SSL (verbose) debugging is on
      Crypto SSL Web Service debugging is on
      Crypto SSL AAA debugging is on
      Crypto SSL Tunnel debugging is on
      Crypto SSL Tunnel Events debugging is on
      Crypto SSL Tunnel Errors debugging is on
      Crypto SSL Tunnel Packets debugging is on
      Crypto SSL Client Package debugging is on
    This is what happens when I browse to the listening IP address (1.1.1.1) from the client:
    CSR_1000V_VPN#
    *Feb 12 05:38:22.959: CRYPTO-SSL: sslvpn process rcvd context queue event
    *Feb 12 05:38:22.959: CRYPTO-SSL: sslvpn process rcvd context queue event
    *Feb 12 05:38:23.004: CRYPTO-SSL: sslvpn process rcvd context queue event
    *Feb 12 05:38:23.004: CRYPTO-SSL: sslvpn process rcvd context queue event
    *Feb 12 05:38:23.183: CRYPTO-SSL: sslvpn process rcvd context queue event
    *Feb 12 05:38:23.183: CRYPTO-SSL: sslvpn process rcvd context queue event
    *Feb 12 05:38:23.217: CRYPTO-SSL: sslvpn process rcvd context queue event
    *Feb 12 05:38:23.217: CRYPTO-SSL: Fragmented App data - buffered
    *Feb 12 05:38:23.217: CRYPTO-SSL-WEBSERVICE: Date: Thu, 12 Feb 2015 05:38:23 GMT, Expires: Thu, 12 Feb 2015 04:38:23 GMT
    *Feb 12 05:38:23.217: CRYPTO-SSL: Unsupported GET Request. Sent Status 501
    *Feb 12 05:38:23.217: CRYPTO-SSL: Chunk data written..
     buffer=0x7FE12868F258 total_len=138 bytes=138 tcb=0x7FE180F64058
    *Feb 12 05:38:23.217: CRYPTO-SSL: sslvpn process rcvd context queue event
    *Feb 12 05:38:23.278: CRYPTO-SSL: sslvpn process rcvd context queue event
    *Feb 12 05:38:23.278: CRYPTO-SSL: Fragmented App data - buffered
    *Feb 12 05:38:23.278: CRYPTO-SSL-WEBSERVICE: Date: Thu, 12 Feb 2015 05:38:23 GMT, Expires: Thu, 12 Feb 2015 04:38:23 GMT
    CSR_1000V_VPN#
    *Feb 12 05:38:23.278: CRYPTO-SSL: Unsupported GET Request. Sent Status 501
    *Feb 12 05:38:23.278: CRYPTO-SSL: Chunk data written..
     buffer=0x7FE12868F258 total_len=138 bytes=138 tcb=0x7FE180F64058
    *Feb 12 05:38:23.279: CRYPTO-SSL: sslvpn process rcvd context queue event
    Thanks in advance,
    Alejandro

    Hi Alejandro,
    Weblaunch for SSL VPN is not supported on CSR 1000v. Here's the enhancement request: https://tools.cisco.com/bugsearch/bug/CSCus02767/?reffering_site=dumpcr
    Please save this bug so that you get notified if any changes are made to the bug's status.
    Regards,
    Anu

  • Error while deploying configurable sku

    Error while deploying configurable sku in BCC server when i give ready for review and all it gives and INFO msg as
    Can't find display name resource and price in bundle and finally when i give accept for deployment the following error displayed .Please help me to resolve it thanks in advance waiting for your reply soon.
    12:38:11,828 ERROR [DynamoServlet]
    java.lang.NullPointerException
    at atg.bizui.activity.ActivityManager.getProcessInfo(ActivityManager.ja
    a:382)
    at atg.bizui.activity.ActivityManager.getProcessInfo(ActivityManager.ja
    a:441)
    at atg.bizui.taglib.GetProcessURLTag.doStartTag(GetProcessURLTag.java:1
    6)
    at atg.bizui.taglib.elwrap.GetProcessURLTagWrapper.doStartTag(Unknown S
    urce)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getTasks_jsp._jspx_meth_b
    z_005fgetProcessURL_005f0(getTasks_jsp.java:1615)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getTasks_jsp._jspService(
    etTasks_jsp.java:359)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
    .java:369)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
    22)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
    icationFilterChain.java:290)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(Application
    ilterChain.java:206)
    at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDis
    atcher.java:638)
    at org.apache.catalina.core.ApplicationDispatcher.doInclude(Application
    ispatcher.java:543)
    at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDi
    patcher.java:480)
    at atg.servlet.WrappingRequestDispatcher.include(WrappingRequestDispatc
    er.java:94)
    at atg.servlet.ServletUtil.invokeInclude(ServletUtil.java:3552)
    at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:757)
    at atg.taglib.dspjsp.elwrap.IncludeTagWrapper.doEndTag(IncludeTagWrappe
    .java:41)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
    dspel005finclude_005f0(getProjects_jsp.java:1192)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
    c005fif_005f5(getProjects_jsp.java:1119)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
    c005fforEach_005f0(getProjects_jsp.java:1077)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
    c005fwhen_005f1(getProjects_jsp.java:1036)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
    c005fchoose_005f1(getProjects_jsp.java:1000)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspServi
    e(getProjects_jsp.java:244)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
    .java:369)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
    22)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
    icationFilterChain.java:290)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(Application
    ilterChain.java:206)
    at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDis
    atcher.java:638)
    at org.apache.catalina.core.ApplicationDispatcher.doInclude(Application
    ispatcher.java:543)
    at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDi
    patcher.java:480)
    at atg.servlet.WrappingRequestDispatcher.include(WrappingRequestDispatc
    er.java:94)
    at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:780)
    at atg.taglib.dspjsp.elwrap.IncludeTagWrapper.doEndTag(IncludeTagWrappe
    .java:41)
    at org.apache.jsp.portlets.ProjectTodoPortlet.index_jsp._jspx_meth_dspe
    _005finclude_005f0(index_jsp.java:2712)
    at org.apache.jsp.portlets.ProjectTodoPortlet.index_jsp._jspService(ind
    x_jsp.java:381)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
    .java:369)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
    22)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
    icationFilterChain.java:290)

    Error while deploying configurable sku in BCC server when i give ready for review and all it gives and INFO msg as
    Can't find display name resource and price in bundle and finally when i give accept for deployment the following error displayed .Please help me to resolve it thanks in advance waiting for your reply soon.
    12:38:11,828 ERROR [DynamoServlet]
    java.lang.NullPointerException
    at atg.bizui.activity.ActivityManager.getProcessInfo(ActivityManager.ja
    a:382)
    at atg.bizui.activity.ActivityManager.getProcessInfo(ActivityManager.ja
    a:441)
    at atg.bizui.taglib.GetProcessURLTag.doStartTag(GetProcessURLTag.java:1
    6)
    at atg.bizui.taglib.elwrap.GetProcessURLTagWrapper.doStartTag(Unknown S
    urce)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getTasks_jsp._jspx_meth_b
    z_005fgetProcessURL_005f0(getTasks_jsp.java:1615)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getTasks_jsp._jspService(
    etTasks_jsp.java:359)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
    .java:369)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
    22)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
    icationFilterChain.java:290)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(Application
    ilterChain.java:206)
    at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDis
    atcher.java:638)
    at org.apache.catalina.core.ApplicationDispatcher.doInclude(Application
    ispatcher.java:543)
    at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDi
    patcher.java:480)
    at atg.servlet.WrappingRequestDispatcher.include(WrappingRequestDispatc
    er.java:94)
    at atg.servlet.ServletUtil.invokeInclude(ServletUtil.java:3552)
    at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:757)
    at atg.taglib.dspjsp.elwrap.IncludeTagWrapper.doEndTag(IncludeTagWrappe
    .java:41)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
    dspel005finclude_005f0(getProjects_jsp.java:1192)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
    c005fif_005f5(getProjects_jsp.java:1119)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
    c005fforEach_005f0(getProjects_jsp.java:1077)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
    c005fwhen_005f1(getProjects_jsp.java:1036)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
    c005fchoose_005f1(getProjects_jsp.java:1000)
    at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspServi
    e(getProjects_jsp.java:244)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
    .java:369)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
    22)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
    icationFilterChain.java:290)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(Application
    ilterChain.java:206)
    at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDis
    atcher.java:638)
    at org.apache.catalina.core.ApplicationDispatcher.doInclude(Application
    ispatcher.java:543)
    at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDi
    patcher.java:480)
    at atg.servlet.WrappingRequestDispatcher.include(WrappingRequestDispatc
    er.java:94)
    at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:780)
    at atg.taglib.dspjsp.elwrap.IncludeTagWrapper.doEndTag(IncludeTagWrappe
    .java:41)
    at org.apache.jsp.portlets.ProjectTodoPortlet.index_jsp._jspx_meth_dspe
    _005finclude_005f0(index_jsp.java:2712)
    at org.apache.jsp.portlets.ProjectTodoPortlet.index_jsp._jspService(ind
    x_jsp.java:381)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
    .java:369)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
    22)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
    icationFilterChain.java:290)

  • Windows Server Essentials error occurred while configuring on Windows Server 2012 R2 Standard

     am attempting to install the Windows Server Essentials on a new domain controller in a new domain and forest.   I go to add roles and features and select essentials.  The config wizard says it is Updating and Preparing the Server and
    That is all the information that you need to provide. Your server is being prepared for use and may restart more than once. This may take up to 30 minutes.
    It goes to 3% and the encounters an error saying An error occurred while configuring Windows Server Essentials. Please try again.  I don't seem to find anything in the log to indicate why it fails.

    Hi boe_d,
    Based on your description, did you mean that this error was occurred in process of installing the Windows Server
    Essentials Experience Role on Windows Server 2012 R2 Standard? If I misunderstand, please don’t hesitate to let me know.
    If it is, have you re-tried the role installation? Please check if still go to 3% and then get the same error
    message.
    In addition, please add
    ServerAdmin$ account to the Logon as a service Group Policy, and then monitor the result. For more details, please refer to the following article.
    You may be unable to run post-deployment configuration wizard after you install the Windows Server Essentials
    Experience role
    http://blogs.technet.com/b/sbs/archive/2013/12/04/you-may-be-unable-to-run-post-deployment-configuration-wizard-after-you-install-the-windows-server-essentials-experience-role.aspx
    If this issue still exists, please navigate to: %windir%\Logs\CBS folder and check the CBS log file if you
    can find any error that depend on the Essentials Experience Role setup time.
    Hope this helps.
    Best regards,
    Justin Gu

  • Creating a planned order with error "Material requires configuration"

    Dear All,
    I am facing a problem for creation of a planned order with error "Material requires configuration".
    To follow the note 180317, I change Account Assignment Category to "U" (Unknown).
    However, the system still does display the same error.
    Could you please help provide possible solution for this?
    Regards,
    Phong

    See also the following blog post:
    Configurable planned order for material variants: Exception "53: No BOM explosion due to missing configuration"
    BR
    Caetano

  • While configuring speed 1000 i am getting error as sw2-storage-vdc(config-if)# speed 1000 ERROR: Ethernet2/6: Configuration does not match the port capability.

    storage-vdc(config-if)# show module
    Mod  Ports  Module-Type                         Model              Status
    2    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
    sw1-gd78(config-if)# sh module
    Mod  Ports  Module-Type                         Model              Status
    2    48     1/2/4/8 Gbps FC Module              DS-X9248-96K9      ok
    4    8      10 Gbps FCoE Module                 DS-X9708-K9        ok
    7    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    active *
    8    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    ha-standby
    10   22     4x1GE IPS, 18x1/2/4Gbps FC Module   DS-X9304-18K9      ok
    Mod  Sw              Hw      World-Wide-Name(s) (WWN)
    2    5.2(2)          1.1     20:41:00:0d:ec:fb:8a:00 to 20:70:00:0d:ec:fb:8a:00
    4    5.2(2)          0.107   --
    7    5.2(2)          1.8     --
    8    5.2(2)          1.8     --
    10   5.2(2)          1.3     22:41:00:0d:ec:fb:8a:00 to 22:52:00:0d:ec:fb:8a:00
    sw1-gd78(config-if)# sh run int ethernet4/6
    !Command: show running-config interface Ethernet4/6
    !Time: Mon Feb 20 22:56:12 2012
    version 5.2(2)
    interface Ethernet4/6
      no shutdown
    sw1-gd78(config-if)# no shut
    sw1-gd78(config-if)# speed 1000
    ERROR: Ethernet4/6: Configuration does not match the port capability.
    sw1-gd72# sh int ethernet4/6 capabilities
    Ethernet4/6
      Model:                 DS-X9708-K9
      Type (SFP capable):    10Gbase-SR
      Speed:                 1000,10000
      Duplex:                full
      Trunk encap. type:     802.1Q
      Channel:               yes
      Broadcast suppression: percentage(0-100)
      Flowcontrol:           rx-(off/on/desired),tx-(off/on/desired)
      Rate mode:             dedicated
      QOS scheduling:        rx-(2q4t),tx-(1p3q4t)
      CoS rewrite:           yes
      ToS rewrite:           yes
      SPAN:                  yes
      UDLD:                  yes
      Link Debounce:         yes
      Link Debounce Time:    yes
      MDIX:                  no
      Port Group Members:    none
      TDR capable:           no
      FabricPath capable:    yes
      Port mode:             Switched
    sw1-gd72# sh int ethernet4/6 transceiver details
    Ethernet4/6
        transceiver is present
        type is 10Gbase-SR
        name is CISCO-FINISAR
        part number is FTLX8571D3BCL-CS
        revision is C
        serial number is FNS12090EMJ
        nominal bitrate is 10300 MBit/sec
        Link length supported for 50/125um OM2 fiber is 82 m
        Link length supported for 50/125um OM3 fiber is 300 m
        Link length supported for 62.5/125um fiber is 26 m
        cisco id is --
        cisco extended id number is 4
               SFP Detail Diagnostics Information (internal calibration)
                                         Alarms                  Warnings
                                    High        Low         High          Low
      Temperature   36.21 C        75.00 C     -5.00 C     70.00 C        0.00 C
      Voltage        3.29 V         3.63 V      2.97 V      3.46 V        3.13 V
      Current        8.11 mA       11.80 mA     4.00 mA    10.80 mA       5.00 mA
      Tx Power       -2.65 dBm       1.49 dBm  -11.30 dBm   -1.50 dBm     -7.30 dBm
      Rx Power       -2.21 dBm       1.99 dBm  -13.97 dBm   -1.00 dBm     -9.91 dBm
      Transmit Fault Count = 0
      Note: ++  high-alarm; +  high-warning; --  low-alarm; -  low-warning

    Ankit,
    You are trying to set speed 1000 on a 10g sfp.
    type is 10Gbase-SR
    You will need to insert a 1gig sfp and then you will be able to set the speed.
    Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface?

  • An error occurred while configuring server as a directory server.  Please check your network configuration and try again.

    Hi there,
    My Mac OS X Server 8.2 got buggered after I did the following steps:
    Wiped Profile manager using "/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeD B.sh"
    Clicking the Off button in the Profile Manager section of the Server.app
    Clicking the On button of the same
    Clicking on asks if I want to create a new directory master, but I know that one already exists.  Trying to continue confirms this.  So, I go and destroy it to start again, but afterward, I get the following error when trying to create the directory master:
    I've done this enough times while watching the system log to see the actual error thrown, which is:
    Nov 12 22:01:24 srv.domain.com Server[279]: An error occurred while configuring srv as a directory server:
        Error Domain=XSActionErrorDomain Code=-1 "A child action failed" UserInfo=0x7fee9516c0f0 {XSActionErrorActionsKey=(
            "Creating Open Directory master"
        ), NSLocalizedDescription=A child action failed}
    I have Googled the above and have discovered only a few entries here in these Apple communities, but have found no joy.
    Here's a similar threads: 
    https://discussions.apple.com/message/19237429#19237429
    Interestingly/confusingly, this server has been working just fine as a domain master using different domain names (on separate occasions/setups).  It was only after having clicked the OFF button in Profile Manager (after a wipe) that things stopped working.
    I could rebuild this server, as I have a backup image of it that I can restore, but I'd rather find out what's broken and fix it so as to hopefully be able to fix it if/when this ever happens to me again, learning something in the process.
    That said, I perform the following steps prior to running the Open Directory setup on a the server to try and clean it up as best possible.
    Clean up steps:
    Delete the DNS zone (and all entries).
    Turn off all server services
    Delete all file server sharepoints
    Change the host name at Hardware => SRV => Network tab.  This runs the Change Host Name program.
    Close Server.app
    Throw Server.app in the trash / Empty trash (I've also just trashed and put back with same result)
    Delete the /Library/Server directory
    Clear and recreate System keychain using "systemkeychain -vfcC" to clear out all the certs related to old host name.
    Delete all the entries in the Login keychain
    Reboot (probably don't have to)
    Re-download and install Server.app
    Run Server.app, which actually retains some settings from the last setup, though I don't know where to clean those.
    After Server setup, confirm that the host name from step 4 is what I want.
    Running "changeip -checkhostname" shows "Success".  I'm using an Internet domain name so pinging the "internal" zone (srv.domain.com) resolves with the correct internal IP, and pinging the "external" zone resolves to the correct external address on the Internet.
    It would seem like I'm all good to go, but when I try to turn on Open Directory and go through the setup prompts, I get the same "Confirm Settings" error as above.
    The *only* way that I've come close to "fixing" this is to cancel out of the Profile Manager.  Then, go destroy the open directory that already exists.  Then create the domain via the Profile Manager enabling process.  At present, this only seems work to for a "private" domain.  Neither of the two Internet domain names that I've used successfully in the past work with this (or any) method. 
    Any advice or clues you can throw my way would be most appreciated.
    Thanks,
    Kim

    Had the same problem found the answer here:
    https://discussions.apple.com/thread/3264944?start=0&tstart=0

  • Error in importing Configuration objects of PI 7.0 to PI 7.1

    Hi All,
    My server is upgraded from PI 7.0 to PI 7.1.
    I am getting Error while  importing Configuration objects of PI 7.0 to PI 7.1 now.
    Pls see the below error
    Attempt to access the 1 requested objects on 1 failed. Detailed information:  com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Adapter Metadata Mail | http://sap.com/xi/XI/System, type AdapterMetaData from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Software component version with key ID: b38bcd00e47111d7afacde420a1145a5 not found
    Pls suggest

    Hi,
    It seems that adapter metadata has not been loaded into integration repository and because of that when you are trying to import configuration objects in ID then you are getting the error.
    The SAP adapter metadata objects are located under the namespace http://sap.com/xi/XI/System of software component SAP BASIS.
    What you can do is, if you have installation dvd's then you can copy from their or you can simply [_DOWNLOAD_|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20 ] from sap market place (refer this [thread|how to import Adapter metadata;) (you must have S-user id for this) and then after you need to do as mentioned below...
    1. First unzip the file (if it is zipped) and then put it in the import directory: \usr\sap\<SID>\SYS\global\xi\repository_server\import\
    2. Now login to IR and then from menu TOOLS ---> Import design objects and import it.
    3. After that in ID, Environment ---> Clear SLD Data Cache
    4. Now you can try to import configuration objects...
    Regards,
    Sarvesh

  • Error in the configuration for sap logon tickets

    Hi Forum,
    I use Tcode crmd_order_bp to see the BP cockpit and the error message displays as
    <b>Error in the configuration for SAP logon tickets</b>
    But if I click "Yes", system displays cockpit.
    How can I avoid this error.
    Thanks in advance
    Regards
    Shridhar

    You will still need to configure SSO (either by logon ticket or username/password). The data source access is done using the username/password configured in the UM Config dialog box.
    I can see where you're coming from with your thinking, however logon-ticket-based SSO is probably the best approach.
    Cheers,
    Darren.

  • "Template import error: No VM configure file found" on brand new setup

    Previously, I posted Console does not launch OVM 3.1.1, Win7x32 Firefox15/IE8 - Empty .jnlp file which was about VM Console not launching. Since this is a new installation, and it seemed to be a unique problem, I scratched the whole installation and started again from scratch. Everything, including the NFS file server, was re-installed from scratch CD OS installation.
    The process is pretty straightforward once you're used to it, and in less than three hours I was ready again to import my first template (a template I had imported before). But now, I submit the the request, and almost immediately the process aborts. (You can see in the information below, that 1 second passes between the Import request (06:32:36) and the failure.)
    Thing is, it takes about three minutes, even locally on the web server, to get an index of that large file (tar tzf), and at completion, the vm config file is listed.
    Am I misreading the error? My web searches for enlightenment found only one good hit on this error, and in that case it appeared to be an "out of space" issue. In this case, though, I'm importing a 5GB tarfile into a 390GB, otherwise-empty file system, so I don't think that is the issue. The failure in ovs-agent.log is below. What other information may I provide to get to the bottom of this? (Thanks for any guidance/help, of course!)
    [2012-10-31 06:31:40 3341] DEBUG (monitor:36) Cluster state changed from [Heartbeating] to [DLM_Ready]
    [2012-10-31 06:31:40 3341] INFO (notification:67) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
    [2012-10-31 06:31:40 3338] INFO (notification:193) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
    [2012-10-31 06:31:48 4914] DEBUG (service:77) discover_cluster: ()
    [2012-10-31 06:31:48 4914] DEBUG (service:85) discover_cluster: call completed.
    [2012-10-31 06:32:03 4926] DEBUG (service:77) storage_plugin_mount: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, {'status': '', 'uuid': 'fc3564eb-ce8b-489c-96bc-df6de2cc8a11', 'ss_uuid': '0004fb00000900003cf41964f3476788', 'size': '330279518208', 'free_sz': '330075340800', 'state': 2, 'access_grp_names': [], 'access_path': 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', 'name': 'nfs:/mnt/ps_big/repo/repo'}, '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55', None, True, [])
    [2012-10-31 06:32:03 4926] INFO (storageplugin:108) storage_plugin_mount(oracle.generic.NFSPlugin.GenericNFSPlugin)
    [2012-10-31 06:32:03 4926] DEBUG (NFSPlugin:353) cmd = ['mount', '-t', 'nfs', 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55']
    [2012-10-31 06:32:03 4926] DEBUG (service:85) storage_plugin_mount: call completed.
    [2012-10-31 06:32:03 4931] DEBUG (service:77) add_repository: ('filesrv.ps.***.com:/mnt/ps_big/repo/repo', '0004fb0000030000659e0ce6f2ecfb55')
    [2012-10-31 06:32:03 4931] DEBUG (service:85) add_repository: call completed.
    [2012-10-31 06:32:36 4972] DEBUG (linux:847) async call function: import_template
    [2012-10-31 06:32:36 4975] DEBUG (service:77) import_template: ('0004fb0000030000659e0ce6f2ecfb55', '0004fb0000140000fdc18a572a244015', ['http://aspire/pstop/OVM_EL5U7_X86_64_TOOLS8_52_06_PVM.tgz'])
    [2012-10-31 06:32:37 4975] INFO (notification:74) async_proc_prog: notification {ASYNC_PROC} progress PID 4975 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 0L, 'CURRENT_BYTES': 613L, 'OPERATION': 'download'}
    [2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} progress PID 4975
    [2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} progress PID 4975
    [2012-10-31 06:32:37 4975] ERROR (service:96) catch_error: Template import error: No VM configure file found.
    Traceback (most recent call last):
    File "/usr/lib64/python2.4/site-packages/agent/service.py", line 94, in wrapper
    return func(*args)
    File "/usr/lib64/python2.4/site-packages/agent/hypervisor/xenxm.py", line 1041, in import_template
    raise RuntimeError('Template import error: %s' % err)
    RuntimeError: Template import error: No VM configure file found.
    [2012-10-31 06:32:37 4975] DEBUG (linux:879) ovs_async_proc: pid 4975 status 1 output Template import error: No VM configure file found.
    [2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} exit PID 4975
    [2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} exit PID 4975
    [2012-10-31 06:32:39 4987] DEBUG (service:77) storage_plugin_listFileSystems: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, True)
    [2012-10-31 06:32:39 4987] INFO (storageplugin:108) storage_plugin_listFileSystems(oracle.generic.NFSPlugin.GenericNFSPlugin)
    [2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:142) ENTER: listFileSysytems()
    [2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:257) EXIT : listFileSysytems()
    [2012-10-31 06:32:39 4987] DEBUG (service:85) storage_plugin_listFileSystems: call completed.
    [2012-10-31 06:32:39 5005] DEBUG (service:77) discover_pool_filesystem: ()
    [2012-10-31 06:32:39 5005] DEBUG (service:85) discover_pool_filesystem: call completed.

    How did you get the template to where you staged it?
    I'd say the template is corrupt or you only have a partial template.
    I did notice the call to the template is based on the short name of the host. Can you confirm the VM manager can access the http path via short name?

  • When I try to reformat there is an error message about configurations with the pointing device

    When I try to reformat there is an error message about configurations with the pointing device
    I am not sure I am on the correct section in the support area for Lenovo.
    I had a mouse issue. It was unable to read the mouse. Now the mouse is working and it is initialized.
    I have no idea why.
    There is an error message saying that I should press F 1or F2. I pressed down F 1 and I tried to work with it and I enabled the mouse or I tried. The mouse is working fine but the computer will not recover completely the way it used to.
    It is very confusing. When I shut down and restart there is an message that was not there before about the pointing device. Also the recovering operation never asked me for disks. Now it is doing that. I have disks but this is all confusing. I just want the computer to be the way it was. It is working fine except for booting up and the messages.

    Hi marissa, welcome to the forums,
    you may or may not be in the right place, but it would certainly help members to help you if you could post exactly which Lenovo system; notebook / computer, you have and which operating system is installed on it.
    Thanks in advance
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • A fatal error occurred while creating an SSL client credential. The internal error state is 10013.

    Hi All
    I am seeing the below event appearing in the system log on all our Exchange 2013 servers regularly. I am not seeing any connectivity issues between any clients and the servers and no other issues have been reported at this stage.
    Log Name:      System
    Source:        Schannel
    Date:          10/04/2015 9:21:17 AM
    Event ID:      36871
    Task Category: None
    Level:         Error
    Keywords:     
    User:          SYSTEM
    Computer:     
    Description:
    A fatal error occurred while creating an SSL client credential. The internal error state is 10013.
    I am not sure if its related to the public certificate we are using or if its related to the one provided from the local CA.I have searched and found other links that suggest it could be related to SSL versions being disabled etc.
    All servers are running Windows 2012 R2 Datacenter. The Exchange CAS servers do also sit behind a pair of F5 BIG IP Load Balancers 
    Any suggestions on where to look?
    Thanks

    Hi,
    According to the event log, the issue is related to Schannel instead of Exchange.
    Please try the following steps:
    1.In Control Panel, click Administrative Tools, and then double-click Local Security Policy.
    2.In Local Security Settings, expand Local Policies, and then click Security Options.
    3.Under Policy in the right pane, double-click System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing, and then click Enabled.
    4. Ran gpupdate /force
    If it doesn’t work, please go to C:\ProgramData\Microsoft\Crypto\RSA and grant "Network Services" Read permission to "MachineKeys" folder. Then restart server to have a try.
    Here is a similar thread for your reference:
    https://social.technet.microsoft.com/Forums/lync/en-US/e70a8dbc-6f48-4fde-a93b-783554344822/a-fatal-error-occurred-when-attempting-to-access-the-ssl-client-credential-private-key?forum=ocscertificates
    Regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Winnie Liang
    TechNet Community Support

  • Error: System not configured as Integration Engine

    Hi ,
    I was trying to simulate the following scenario in SAP XI:
    HTTP--> SAP XI --> (RFC/BAPI)SAP R/3
    Let me clear what i did.
    I have to call a BAPI using RFC adapter in XI to display some information on a request of some Http app.
    1. I have Imported the RFC BAPI into IR.
    2. I have created the XSD files for http Re and res messages.
    3. I have created the XSLT mapping programs and put them in a zip file and imported into IR.
    4. I have created a Interface mapping and assign the created messages and mapping programs.
    5. In ID i have created a Business service for my web application.
    6. Receiver determination created in Id and Interface determination and receiver agreement in ID and activated the changes.
    7. I have tested the same by sending the request from my web application to xi plain http adapter as follows:
    http://grserver:8000/sap/xi/adapter_plain?bs=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
    and in the result i have got the following error:
    "System not configured as Integration Engine"
    but i have tried it many times and some times it gives me correct results but after that the same error ios coming.
    so can you tell me what could be wrong in the configuration of XI of what is the solution for this problem.
    Reagrds
    Gopesh Kumar Agarwal

    Hi,
    What is the version of XI you are using? If u are usign XI2.0, ur URL is correct. But if you are using XI3.0 then use <b>service</b>=<SENDERSERVICE>instead of
    <b>bs</b>=<SENDERSERVICE> parameter in your URL.
    <b>bs</b> is replaced by <b>service</b> in XI3.0
    Your URL will be http://grserver:8000/sap/xi/adapter_plain?<b>service</b>=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
    Hope this helps you.
    Cheers,
    Siva Maranani.
    Message was edited by: siva  maranani
    Message was edited by: siva  maranani

Maybe you are looking for