Error in E-CATT
Hi I am getting this dump while trying to record a Web dnypro application through E-catt
Access via 'NULL' object-reference not possible.
Any issues with the url is it compulsary to provide some parameters in the url
I am unable to record a web dynpro applicatoin ....log on screen comes ok then after putting user name
and password the dump comes.
any clues ?
Hi,
Please make sure that your production system has the same SAP support package levels as other systems. Otherwise, you may get this error.
Please also check SAP note 802475.
Regards,
Dilek
Similar Messages
-
Is there any command/FM to get rid of error message in CATT?
Dear friends,
Is there any command/FM to get rid of error message in CATT? such as the following in eCATT script?
MESSAGE ( MSG_1 ).
ENDMESSAGE ( E_MSG_1 ).
or any body now how to get the socrce code of these commands?
Many thanks!
CliffHi,
See the help
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2143b408e11d1896b0000e8322d00/frameset.htm
Regards
Kiran Sure -
Syntax error in SCAT (CATT script)
Hi All,
I have a problem when i use SCAT script to define the import parameter
Here the error message goes...
Syntax error : &value (offset and length are not in the form +x(
Please guide me how to fix this?
Appreciate your response.
Thanks in advance
Edited by: Dharmendra Pewa on Dec 24, 2010 1:32 PM
Moderator Message: Duplicate Post.
Edited by: kishan P on Dec 24, 2010 6:42 PMHi,
Thanx for the reply, but this ' ( ' is coming by itself in the Field name column in the Field list screen, that too in display mode, it is not allowed to change there. please suggest.
Keyword Field name Len New field contents
BDC_CURSOR 000 &BDC_CURSOR
BDC_OKCODE 000 &BDC_OKCODE
Material KOMG-MATNR(1) 018 10055
Calculat.type RV13A-KRECH(1) 001 Q
Valid on RV13A-DATAB(1) 010 01.05.2010
Valid to RV13A-DATBI(1) 010 30.04.2011
AddValDays KONP-VALTG(1) 002 0
DP -
CATT Recording Error with ME32 / ME32L (DYNPRO_NOT_FOUND)
Hello,
I am trying to record a CATT test case with transaction ME32 or ME32L and am failing when I go into the "Header Details" section. I am trying this on a IDES 4.6c system.
The error I receive is "Runtime error DYNPRO_NOT_FOUND has occurred".
Please help. Not sure what to do.
Thanks,
CharlesHi,
Check is there any screen exit which might getting triggered with set values your passing to the Bapi.
as cannot handle z screens which are added to the traansaction.
Check whether it happening for all set of data or not ...if not check for the what values it is giving dump. -
Hi everyone, I am new to this so hopefully I am in the right place.
Just installed MiniSAP & all is working well except getting an ABAP dump when entering CATT (SCEM) ... haven't changed anything!
Text of dump is redirecting me to SAP Notes for resolution ... problem is as an ABAP student (cross-training from Delphi) I don't work in an SAP environment.
I do not have a customer number (I just bought the ABAP Objects book) & the installation number that comes after licensing doesn't work @ www.service.sap.com ... the helpdesk staff just tell me that I need on or the other to register.
Any thoughts on a) how else to gain access to SAP Notes or b) how to interpret a ABAP dump by other means?
Thanks,
IanNo. Still I am getting tthe same error. Invalid character in the string.
Zulfi. -
Hello Guru's,
New condition records were created for some items (590 690) the following error log appeared after the upload was complete. Will anyone guide me what is this issue.
Error message:
Z_MM_ME32K_OA_PRICE_CIND12_19B/00001 00:00:09 ME2K change contract price w/validity dates 12_1 RUSSELS
H:\CATT\OA PRICE Mods\OA 46_2999 updates VD26 Testing.txt
Error in application transation ATT377
Control data is obsolete, record(VERBS-NAME: CreateObject CATT <none>
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Mar 12, 2008 6:33 PMhi ,
check this....check the error log may it helps u,
goto sm35.
select the session.In the appl. toolbar press log.
it will take u to log overview. pressdisplay,u can see all the errors during that session.
check this code to display the error mesgs.
CALL TRANSACTION 'MM02' USING IT_BDCDATA MODE 'A' update 'S'
MESSAGES INTO IT_MESSAGES.
CLEAR IT_BDCDATA.
REFRESH IT_BDCDATA.
LEAVE TO LIST-PROCESSING and return to screen 0.
WRITE:/ SY-SUBRC.
PERFORM MESGS.
FORM MESGS .
DATA: V_MSG(100) TYPE C.
LOOP AT IT_MESSAGES.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = SY-MSGID
LANG = 'EN'
NO = SY-MSGNO
V1 = SY-MSGV1
V2 = SY-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = V_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE:/ V_MSG.
clear v_msg.
ENDLOOP.
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2143b408e11d1896b0000e8322d00/frameset.htm
regards,
venkat. -
Folks,
A CATT was created in Development (client 300) and moved to a Testing client (400) and then to Production (700).
In 300 and 400 the CAT works fine. But when yu execute it in Production (different server) it shows the following error for each of the records:
"Error in application transaction ATT377
Control data is obsolete, rerecord (VERBS-NAME: CreateObject CATT: Callno: 000001)"
When you check the master data, the CATT modified it as requested, but this red message appears and you have to manually check the records in order to review if change was done,
Any idea on what´s the cause and solution?
Thanks.Hi Andry,
Is your Problem resolved
Please reply with solution
Thanks,
Manish -
Hi Folks,
When running a CATT ( transaction SCAT ) in Production, I get the following error:
Error in application transaction ATT377
Control data is obsolete, rerecord (VERBS-NAME: CreateObject CATT: Callno: 000001)
If I run the CATT in the Development Environment I don´t get the error.
Any help will be appreciated ( and rewarded with pts!! )
Thanks.Hi Andrey,
well, normaly 90% ATT377 error does not have any effection to your CATT however, some of them are real problme.
there are a lot of reasons can cause ATT377 error such as SAPGUI version, TCD interface. just one thing you need make sure to avoid this problem: you need excatly as same system enviroment as the CATT was recorded such as SP level and SAPGUI version..
Please award me points if you are satisfied with my answer:)
Thanks and Best regards,
Cliff -
E-catt Script error while trying to Modify the script
Hi All ,
I get the error while trying to modify the E-catt Script "Entry cannot be changed In User View Object <Objext Name > ". Please let me know if Some one confronted with same error or that can be avoided.
Waiting for your reply
BadariHi Baez,
You have to create a record with country record id in BankDetails table or get record id if country record id is already existed in BankDetails table and use this record id to create qualified link .
1. get Country record id
2. search in Bankdetails table with Country Record id,
3 . if exist in Bank details table, get record id in Bank details table and pass it to createQualifiedLink()method
or
3. if Country record does not exist in BankDetails table, then create new record in bankdetails table with Country record id, pass record id of new record to createQualifiedLink()method
I hope this helps you......
Cheers,
Veeru -
Hi all!!
I've created a CATT process and it generates an <b>ATT377 Error: Control Dates Obsoltes</b>
Can anybody help me with this error?? Some idea why it appears??
Many thanks!!
GemmaHi,
Please make sure that your production system has the same SAP support package levels as other systems. Otherwise, you may get this error.
Please also check SAP note 802475.
Regards,
Dilek -
Syntax error in CATT (SCAT)
Hi All,
I have a problem when i use SCAT script to define the import parameter
Here the error message goes...
Syntax error : &value (offset and length are not in the form +x(
Please guide me how to fix this?
Appreciate your response.
Thanks in advance
DPHi,
Thanx for the reply, but this ' ( ' is coming by itself in the Field name column in the Field list screen, that too in display mode, it is not allowed to change there. please suggest.
Keyword Field name Len New field contents
BDC_CURSOR 000 &BDC_CURSOR
BDC_OKCODE 000 &BDC_OKCODE
Material KOMG-MATNR(1) 018 10055
Calculat.type RV13A-KRECH(1) 001 Q
Valid on RV13A-DATAB(1) 010 01.05.2010
Valid to RV13A-DATBI(1) 010 30.04.2011
AddValDays KONP-VALTG(1) 002 0
DP -
Hi Gurus,
I have created a CAT Script using SECAT and Test configuration...I am able to execute with a Vvariant file...
Here whats happening...
Its only creating only one user in the list and that too with out roles...
How to assign multiple roles..I have defined in the variant file like
ZROLE
ROLE1,ROLE2 is there any other format...?
Please let me knowHello Guru
I assume you have recorded a transaction (SU01) to assign roles to a user. My experience with eCATT is that sometimes for unknown reasons dynpro data are no longer recognized by the scripts.
Therefore, I would suggest to assign roles to users using BAPI_USER_ACTGROUPS_ASSIGN.
Please note that this BAPI works using a "Delta" mechanism. If a user has already two roles assigned and you want to add a third role you have to read the assigned roles first (using BAPI_USER_GET_DETAIL ) and provide all three role assignments for BAPI_USER_ACTGROUPS_ASSIGN. If you just provide the third role the other roles will be unassigned.
Regards
Uwe -
Error: Field BNKA-BNKLZ . is not an input field
Dear Experts,
My client following vendor creation process is as follows
Requestor logs his request into EP -> it is recorded into MDM -> after approval from central team, it syndicate into SAP -> Idoc entry -> Table entry
Now in case of vendor request comes with bank data, Idoc gets failed with error message u201CField BNKA-BNKLZ . is not an input fieldu201D
Message no. 00347
Diagnosis:
A transaction is processed using batch input.
System Response:
The runtime error field xxx occurs (invalid entries)
Procedure:
Correct the batch input data. Depending on the processing scenario, this can affect either of the following objects:
Batch input session
CATT procedure
Application program
If I reprocess this Idoc in foreground mode in Tcode: WE19 it is getting successfully posted.
Kindly help me to resolve this issue.
Regards,Can it be that you have bank data in your vendors for banks that are not yet created.
if you create vendors manually then SAP is creating the bank master record automatically in background if not present when you entered bank data in the vendor master.
But in IDOC processing, SAP just focus on the master data transferred with the IDOC, it creates vendor masters, but it does not create central address data nor bank data.
you have to create the banks as a preceeding step to vendor creation. -
Error in BDC using 'N' mode while creating production order
Hi,
I am trying to create a production order ( transaction CO01 ) by using a BDC. I just have to fill the header details, components , assign the component to operation , save and exit. When I am running the BDC in 'A' or 'E' mode, it works fine. The 'E' mode doesnt stop anywhere and successfully creates the production order . But when I change the mode to 'N', it throws an error "No batch input data for the screen SAPLCOKO1 0115". I am using Call transaction in BDC to create the production order. What could be the issue? Can someone throw some light?
Thanks,
SuganyaHi Suganya,
I guess that Chandra Madapati is right. I also faced the same issue for another transaction.
If you want to disable the batch input (sy-binpt), you can use the addition OPTIONS FROM in call transaction statement.
It refers to the structure CTU_PARAMS in ABAP dictionary and contains the following components:
Component
Meaning
DISMODE
Processing mode for batch input processing. Values as for the MODE addition.
UPMODE
Processing mode for batch input processing. Values as for the UPDATE addition.
CATTMODE
CATT mode for batch input processing. CATT means Computer Aided Testtool. While batch input is mostly used for data transfer, CATT processes are to be viewed as more complex transactions, since they are reusable tests. Values: " " (no CATT mode), "N" (CATT without single screen control), "A" (CATT with single screen control).
DEFSIZE
Selection as to whether the screens of the called transaction are displayed in the standard screen size. Values "X" (standard size), " " (current size).
RACOMMIT
Selection as to whether the COMMIT WORK statement terminates batch input processing or not. Values: " " (COMMIT WORK terminates processing), "X" ( COMMIT WORK does not terminate processing).
NOBINPT
Selection for the symbol field sy-binpt. Values: " " (sy-binpt contains in the called transaction "X"), "X" (sy-binpt contains in the called transaction " ").
NOBIEND
Selection for the system field sy-binpt. Values: " " (sy-binpt contains "X" after the end of the batch input data in the called transsaction ) "X" (sy-binpt contains " " after the end of the batch input data in the called transaction).
In this, if you give NOBINPT as 'X', the system field sy-binpt becomes disabled. You can also set the processing mode and update mode using DISMODE and UPMODE respectively.
Thanks & Regards,
T. Prasanna Kumar -
Error while running the CAT script
Hello,
I am running eCATT script that creates test users by copying from source users to target users.
I am getting following error message.
Field USLOGOND-USTYP. input value is longer than screen field
Message no. 00348
Diagnosis
A screen field was supplied with longer field contents by batch input.
Procedure
Correct the field contents in the batch input data.
Please advise.
From
PT.In that case you'll need to go through your script, find the field that triggers the error, and its value and replace the value with the character from the other thread.
Or you could add it as a variable, like the variables you've already defined. I do not know about the risks of deleting fields/values from a script
Anyway, this has now become a catt or ecatt question rather than a security issue, so you may find the appropriate guru's in one of the other forums....
Maybe you are looking for
-
Hi, I am creating Service Order from SD Order using Requirement class for the Sales of Services. Service Order will be used for Service Execution. The Problem is when I used Service Product (DIEN) quantity more than one, system stops to create Servic
-
Snow Leopard and Windows 7 networking - Can't see in Finder
I have 6 Mac Pros all networked, and have just added 2 Windows 7 Ultimate computers. I have gone through the setup on all machines so that I SHOULD be able to see the Windows 7 machine in the finder, but I cannot. I have a folder on one of the Window
-
Moving entries of imported Audio cd's to one genre to another?
I've imported a number of audio cd's from the same artist and it has arranged them into two different genres. Anyone know how to move imported items in the itunes library from one genre to another so that the mulitple albums by the same artist are co
-
Ok I am getting problems with full screen graphics on some computers. I am writing an internet based RPG and this is really eating into my time... Can any one explain why my graphics will not show some times (works others) with the exact same code ru
-
OS 10.5.4 Updates
Can anyone out there tell me why Apple hasn't posted the iTunes 7.7.1 update on their site yet. I usually download the update and save it to a backup disc for obvious reason but this one so far is a no go. Is it just a lag in getting it posted or is