Error in EA13 (Single Reversal of Print Documents) : 'TE508 does not exists

HI All,
When reversing an individual invoice in EA13, an error comes up in the log. Though the invoice has been successfully reversed.
The following error is displayed 'TE508 does not exist'
Any reasons
Regards,
Rahul

The following error is displayed 'TE508 does not exist'
Check the settings in spro
contract billing>Billing master data>activate display mode for Billing key date.
try to do with reverse selection.
Regds,
Narendar Konakanchi

Similar Messages

  • Sales document 187000001 does not exist

    Sales document 187000001 does not exist
    Message no. VB001
    Can you please advice why this error occurs? I am creating sales order (RE) type with reference to actual sales order, during reversal process all the docuemnt generating but still not showing document deleted Archive
    1. Sales order created
    2. Delivery Generated
    3. PGR Done
    PGI Docuemnt not showing and
    4. Billing Docuemnt Generated
    Regards,
    Vijay Sanguri
    09324905500

    I am creating sales order (RE) type with reference to actual sales order
    First of all, this itself is wrong.  Why you were creating return order with reference to original sale order.  You should always create a return order with reference to billing document.
    1. Sales order created
    2. Delivery Generated
    3. PGR Done
    PGI Docuemnt not showing and
    Again, I dont know why once you have done PGI, why you have created a return delivery ??
    thanks
    G. Lakshmipathi

  • Error: For object RF_BELEG 9000, number range interval 92 does not exist FB

    Hi,
    When I am executing AFAB in test run mode for a particular company code I am getting below mentioned error:
    +For object RF_BELEG 9000, number range interval 92 does not exist FBN1+
        +Message no. NR751+
    +Diagnosis+
        +The database table NRIV has the delivery class 'C', i.e. the SAP default+
        +settings are only in client 000.+
    +Procedure+
        +Create the missing number range interval in customizing.+
        +Transaction code: FBN1+
    When I maintain number range 92 this error goes away. My question is we have no where assigned this number range 92 to any of the Document type then why system is asking to maintain the same?
    Sanjay

    Hi,
    You might be using the number range (say 92 which you've created in GL view & not in ENTRY view).
    Steps:
    Go to Define Document Number Ranges for Entry View OR use T-code FBN1.   Maintain & Assign two Number Ranges say 91 & 92 one for Document Type AF and another for AE for both the non-leading Ledgers say Y1 & Y2 ( Define Document Type for Entry VIew in a ledger). Also assign a number range to
    Document type SX (Closing Posting) apart from the above two Number Ranges (91 & 92)
    Hopefully it works for You............
    Dipti

  • Error while deploy mapping ora-06550 table or view does not exist

    Hi everyone,
    i have a target source 'U_BCK' that cointains some Oracle table.
    I have also created a target schema 'BCK_OWNER' where i create some dimensions and cubes with mappings.
    My mappings connect some table from U_BCK with dimension or cube from BCK_OWNER.
    My repository owner is called 'rep_owner' and i used this user to create every metadata.
    Now i'm trying to deploy, and i don't have any problem until deploying mappings. When i try to deploy mappings i get some errors like ora-06550,ora-00942 table or view does not exist and statement ignored.
    Please help me and sorry for my english...
    Thanks,
    Alex.

    The mapping, that drives the data from one table to another is deployed to the database as a PL/SQL package. When deploying your mapping fails, it most often means that the resulting PL/SQL package doesn't compile in the database.
    Using Oracle SQL Developer (or Toad, SQL Navigator or any other tool) connect to the schema on the database where you have deployed the mapping. Open the pl/sql package and compile it. That should show you the place where the compilation fails, and give you an idea as to what table it can not find. Otherwise, in SQLPLUS, you can simply give the following command:
    ALTER PACKAGE THE_PACKAGE_NAME_GOES_HERE compile body;
    show errors;
    As the database user who owns the source tables, make sure to issue a GRANT command for each of the source tables, granting SELECT access to the database user who owns the mapping:
    grant select on TABLENAME to TARGETSCHEMA.
    hope this helps
    Borkur

  • Web-dynpro application -ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)

    i have created my web-dynpro application in development. and sent to quality . whenever i will execute my dynpro in quality  i got one message
    ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)
    whenever i saw  sicf  transaction my web-dynpro is not seen . my dynpro application name is more then 15 character. what i will do . please give me valuable suggestion.....

    Hi Ashok,
                   for your requirement the application is not exist in particular place. It means, the webdynpro application is saved at different package or different location.
                  Please change the webdynpro component name and save it in particular request in package, then transport it to quality ..(development server )
    then go to SICF  t.code .. sap->bc->webdynpro->sap->find  out your application and activate the service of your webdynpro application.
    Now test it ... this solution might helpful to you .
    Regards,
    Naveen M

  • Error trying to recreate OEM dbconsole in 11GR2 - aux_stats$ does not exist

    I created a blank 11GR2 database, then created tablespaces, users etc. and imported schema's from 9i export. So far so good.
    Now I can't connect to the OEM dbconsole, all arrows are green, instance up, listener up etc. but says it cant connect.
    Ok, recreate dbsonsole , first drop sysman, dbsmp cascade etc, then run emca -deconfig dbcontrol db -repos drop - seemed to go ok
    then run emca -config db -repos create - it asks for passwords etc, all ok so far, then craps out, I look in the logfile and see this:
    GRANT SELECT, INSERT, UPDATE, DELETE ON AUX_STATS$ TO SYSMAN
    ERROR at line 1:
    ORA-00942: table or view does not exist
    So now what? Why would it try to grant access to a table or view that does not exist? Did I miss something here?
    thanks

    This will give you the complete picture of Grid Certification.
    Oracle Enterprise Manager 10g Grid Control Certification Checker
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412431.1
    Is there a workaround or a version that will install on 2008 x64?Well, no OMS has been certified with this version as of now. You can have 10.2.0.3/4 OMS on 2008(32 Bit)
    10.2.0.4 Agent is certified with 2008 64 bit.

  • Error in EA00 - EITR Billing Document No. does not exist

    Hi Experts,
    I am tryign to Final bill a moved out contract for the dates 16.05.2007 to 31.12.2008.
    The joint invoicing condition is 1. When I try to bill these billing documents through EA00 I am getting the Error "EITR <Billing Do. no.> A does not exist.
    Even when I try to confirm move out and Final Bill through Transaction EC56E I am getting the same error for all 3 contracts.
    The three billing documents for which I am getting the error have been already reversed and are not seen in EITR. They are seen in table ERCHC.
    Any idea why this error occurs? I added entries in table EITR manually for the 3 billing documents, then the error does not occur any more. But this doesnt seem to be a very acceptable solution.
    Let me know your insights on this one.
    Thanks and Regards,
    Prajakt Dhumal

    Thanks for your mail.
    I am trying to final bill a customer (03). The bill order is created successfully for the period which I am trying to bill. Also, when I am trying to bill the contract thru EA00, I am getting an error that u201CEITR <billing doc no> A Not foundu201D.
    The billing doc in the above error is of a different period (later that the Final Billing period) and has also been reversedu2026 I am not understanding why its referring to that Billing doc while billign a different period entirely
    Thanks and regards,
    Prajakt

  • Adobe form for Billing document - FM does not exist error

    Hi,
    I have to display the document title as Invoice/Credit Memo based on the billing type in the adobe form. I tried to include a text field in the adobe form to display the title which I pass from my print program based on the billing type (instead of hard coding it).
    I get the name of the function module generated through debugging and try to use in tthe program to call the form. But I get the error message that the Function Module does not exist.
    I have included the title field in my interface, context, form and have activated them.
    Is my approach incorrect or am I missing something?
    Regards
    K

    Hi Jon,
    I tried doing it again today morning and it worked!!! Thanks for your help...

  • Error in SE16n - PIR exsist only in EINE table & does not exist in EINA tab

    Hello All,
    This is regarding error in Pucrahsing Info Record in which PIR only exist in EINE table & not in EINA table. This is not normal behavior of SAP standard.
    In this issue we are able to see P. Info Record (5300083719) details in EINE table only.
    But the same PIR does not exist in EINA table .
    Also we can not see this in display mode(ME13) & system does not allow us to change PIR. System gives the error message that PIR does not exist.
    This is something strange. Can you pls. reply on this.
    Thanks in advance.
    Mahesh
    9869633910

    Hello,
    The PIR No is availabe in EINE (pur org data) and the same PIR is not availabe in EINA table( General data ).
    This is Program error. bcz some times system will not get the correct PIR no while creating the PO, in that time system will create new PIR , that no is from buffer table..
    And you cannot track that buffer table....... If you want to check the  on that day,, how many PO's were created for that same combination of material and vendor.
    Regards
    Mahesh Naik.

  • Error while creating folder: Path is invalid because folder does not exist

    Hi,
    I am having an issue while creating Folders in ID, when I create folder Structure like EDI -> VENDOR -> DELL I am getting the error as below:
    Path /EDI/VENDOR/DELL/ is invalid because folder VENDOR does not exist
    So first 2 levels of folder structure is fine and when I create third level (DELL) I get the above error. Any idea how to resolve this or is this the limitation?
    We have
    Service Pack:06
    Release:NW711_06_REL
    Thanks,
    Laxman

    Hi Laxman,
    Kindly try to refresh the SLD cache by going to Environment -> Clear SLD Data Cache. Make sure that the Cache Status are all in green.
    Hope this would help.
    Regards,
    Jenny

  • Error 'The application id or shortname (-1) you entered does not exist.'

    Hello,
    When I run the OA page it opens without any errors,but I delegate to Other page for insert record it showing following Error
    , Please help me to resolve this error.
    oracle.apps.fnd.framework.OAException: The application id or shortname (-1) you entered does not exist.
         at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(Unknown Source)
         at OA.jspService(_OA.java:87)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
         at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
         at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
         at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
         at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
         at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:392)
         at OA.jspService(_OA.java:80)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Regards,
    Kapil

    Helllo Friends,
    Issue get resolved. On page, there was one field with Item Style 'MessageLOVInput' and I had not given a source for 'External LOV' to that field.
    Thanks,
    Kapil

  • Error while deploying map: ORA-00942 Table or view does not exist

    Hi OWB experts,
    I'm having yet another problem with OWB, this time when I try to deploy a mapping I get this error:
    ORA-06550: line 59, column 3:
    PL/SQL: ORA-00942: table or view does not exist
    DIM_01_ESTCON_MAP
    ORA-06550: line 93, column 3:
    PL/SQL: SQL Statement ignored
    If I open the package that OWB created I see the errors:
    CURSOR "DEDUP_SRC_0_IN2_c" IS
    SELECT
    "DEDUP_INPUT_SUBQUERY2$1"."ESTADOCONEXION_ID" "ESTADOCONEXION_ID",
    "DEDUP_INPUT_SUBQUERY2$1"."ESTADOCONEXION_COD_ESTCON" "ESTADOCONEXION_COD_ESTCON",
    "DEDUP_INPUT_SUBQUERY2$1"."ESTADOCONEXION_DESC_ESTCON" "ESTADOCONEXION_DESC_ESTCON",
    "DEDUP_INPUT_SUBQUERY2$1"."STANDARD_TOTAL_COD_TTL" "STANDARD_TOTAL_COD_TTL"
    FROM
    (SELECT
    DISTINCT
    "DIM_01_ESTCON_MAP"."GET_CONST_CA_0_ESTADOCO" "ESTADOCONEXION_ID",
    "ESTADOS"."ESTADO" "ESTADOCONEXION_COD_ESTCON",
    "ESTADOS"."DESC_EST" "ESTADOCONEXION_DESC_ESTCON",
    "DIM_01_ESTCON_MAP"."GET_TOTAL_C_0_TTLID" "STANDARD_TOTAL_COD_TTL"
    FROM
    "CONSULTA"."ESTADOS"@"PROD@AYADEV_LOCATION" "ESTADOS"
    WHERE
    ( estado LIKE 'EC%' )) "DEDUP_INPUT_SUBQUERY2$1";
    Where AYADEV_LOCATION points to the module/schema/location where my source data is.
    Now, I have defined three modules:
    SOURCE, where I defined the tables and other objects from the original database (source data)
    STAGE, where I am performing all the transformations; here I defined all the maps
    TARGET, this holds the dimensions and fact tables.
    Now all three modules point to different databases. The dblink for AYADEV_LOCATION has been created and shouldn't present any problems. The username that I'm using to log on to the source database is current and I can connect to it through SQL+ or any other program (TOAD, SQLDeveloper).
    What could be happening here? I'm using OWB 10g R2, with Oracle DB 10g R2.
    I'd really appreciate any help you could provide.
    Best Regards,
    --Osvaldo
    [osantos]

    Hi,
    I'm still having problems but I found out why these tables are returning errors. The username I've been given by the DBA to connect to the database is CONSULTA, but this user is only for querying purposes, the actual objects reside on a differente schema, of course, which is PROD. So the line:
    "CONSULTA"."ESTADOS"@"PROD@AYADEV_LOCATION" "ESTADOS"
    raises an exception because the table ESTADOS is not located on that schema, but on PROD. If I query the table from SQL Plus with:
    SELECT *
    FROM [email protected]@AYADEV_LOCATION
    then there's no problem at all.
    Why is this? How do I instruct OWB to point to the correct schema or to avoind fully qualifying the table name?
    Please help me, I'm kind of confused here.
    Best Regards,
    --oswaldo.
    [osantos]

  • Error While Generating Form-16 (HR_INF16_2012_B in language EN does not exist)

    Dear Experts
    My client is using SAP ECC6 EHP4 and We recently updated the HR Service Pack to SAPK-60464INSAPHRCIN in order to apply the SAP Note 1829618 - PY-IN: Union Budget Changes for Year 2013.
    After upgrading Service Pack we are getting the below error while generating Form-16.
    Layout set HR_INF16_2012_B in language EN does not exist
    How to resolve this issue
    Thanks

    This a Blunder from SAP. And this issue we are getting in almost all the client.
    For this we have to download respective Form from Golder client 000 and upload again in our working client.
    Better please raise an OSS message with SAP to provide you the steps.
    Thanks & Regards
    Rupesh Jain

  • EWT Error: Business place/Section Code TAN1 in company code  does not exist

    Hi all
    Could I have the configuration required for EWH Tax .
    Business Place has been configured in Korea and also Section Code defined. No. Range Groups, No. Ranges were defined and assigned for Remittance Challans and Certificates.
    I posted an invoice by F-43 and tried to Create Remittance Challan by J1INCHLN, after filling all the required fields and having 'executed', the system gives an error:
    "Business Place for document could not be determined"
    Message no. 8I707
    Could anyone guide me through how to come out of this problem.
    I Created following step created
    Define Business Place
    Com.code     Sec Code      Name1
    LA01          TAN1          Head Office
    Define Section Code
    Sec Code  Name1            Busi Place   Name 1                       Local Tax Code     Dis.Tax Office
    TAN1     Head Office     HOLA     Head Office for LA01     LA1                   LA1
    Thanks & Regards
    Selva

    Hi All
    I already created in Business place  and assign business place  also
    But any way i am getting  error, please  let me how to close this issue
    Define Business Place
    Busi.Place     Name1
    HOLA          Head Office for LA01
    Define Section Code
    Sec Code   Name1             Busi Place   Name 1                         Local Tax Code         Dis.Tax Office
    TAN1      Head Office     HOLA        Head Office LA01          LA1                               LA1
    Thanks & Regards
    Selva

  • Error Expanding Database Node :  ORA-00942 table or view does not exist

    I just installed the ODT for Visual Studio.NET. It installed fine and I can connect to my databases. However, I am having trouble expanding adatabase node to see all of its object nodes (tables, views, ...). I get the ORA-00942 error when connecting with a user id and password used by an application. If I use my personall user id an password, I can expand the database node. What table or view is it looking for that it cannot find? Is this something that our DBA has prevented? Any ideas would be appreciated.

    Only guessing, but I wouldn't expect an application id to have anything like the same rights as a normal id. I wouldn't expect it to have any rights to tables, just to stored procedures and/or views, but this would be up to the standards in your organisation. This will be something the DBA has done, probably granting the absolute minimum of rights to the application id. It might be looking for one of the system views, so if there's an option to ignore system objects try setting it.

Maybe you are looking for