Error in EA27 BBP for Number ranges

Dear All,
We are getting an error in Batch Job for EA27 for the number ranges.The error is as below :-
Shor Text :-
No number range determined for payment forms
Long Text:-
Message no. >2459
Diagnosis
You want to print forms that contain a payment form and number the payment forms. For payment forms, internal unique numbers are assigned automatically from predefined number ranges. In this case, no appropriate number ranges have been set up, or all number ranges set up are locked by parallel processing runs.
System Response
Error message and termination of processing, since the system cannot number the payment forms.
Contact your system administrator.
Procedure for System Administration
Check whether number ranges are set up as follows.
To do so, choose Maintain entries or Customizing.
Number range Number from Number to
00 000000000001 009999999999
01 010000000000 019999999999
02 020000000000 029999999999
03 030000000000 039999999999
04 040000000000 049999999999
05 050000000000 059999999999
06 060000000000 069999999999
07 070000000000 079999999999
08 080000000000 089999999999
09 090000000000 099999999999
Create the missing number ranges. If necessary, you can create more number ranges than the 10 proposed.
I am clueless about this error , please help me to resolve this error.
regards,
Sagar

check
PA04 check with number ranges
ans also check PE03 NUMKR

Similar Messages

Error when creating interval for number range object

Hi,
I am trying to transport my BW stuff from QA to Production and I am getting the following error in the transport logs. The info objects are inactive in RSA1.
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
Characteristic YRESD: Error when creating interval for number range object BIM0000396
Can some body advise me what's wrong? Is something need to be maintained in number ranges?
Also when I am checking the objects in RSA1, I am getting a message saying "source system WD110 does not exist", WD110 is our dev system. How can I change the source system after transport?
Thanks.
Edited by: Raj G on Mar 20, 2008 11:38 AM

Also when I am checking the objects in RSA1, I am getting a message saying "source system WD110 does not exist", WD110 is our dev system. How can I change the source system after transport?
Which system are you checking this?
refer: Re: Transport Source Systems from DEV to Testing for step to map the source systems for transport

Interval 01 was not created for number range object HRTEM_REFN

Dear expert!
Now, I'm getting some issues in Training and event management module.
- The first, I created business event
- Second, I process to book for business event by tcode: PSV1 --> book --> book/payment info --> activity allocation.
But when I was booking, the system displayed error: "Interval 01 was not created for number range object HRTEM_REFN"
Help me, please!
Best regards, Huy!

Go to the customization as below
Training and event mgt>Basic settings>Number range maintanence>Define number ranges for External operation
and maintain number ranges as 01 Internal
Hope ur problem will solve
with regards
partha

"" No authorization for number range object type GTIN and activity SHOW ""

While creating number range in number range administration for GTIN system showing the error
"" No authorization for number range object type GTIN and activity SHOW ""
Pls help me to solve this issue

Hi ,
Please check roles for user assigend as [ This is for super administrator ]
SAP_AIN_ADMINISTRATOR
SAP_AIN_OER_ADMINISTRATOR
SAP_AIN_SUPER_ADMINISTRATOR
SAP_AIN_SUPERVISOR
SAP_AIN_WORKER
and profiles assgined as
SAP_ALL
SAP_NEW
Hope it will helps
Thanks .,
V.Rangarajan

No authorization for number range object type BTI and activity SHOW

Hi All,
When I try to execute
SAP Easy Access screen - > Auto-ID Infrastructure -> Master data -> Number Ranges -> Number Range Administration
on the next web window when I select the object type BTI , it comes up with the error
Number range table not maintained for object BTI in customizing
No authorization for number range object type BTI and activity SHOW
I am using AIN 5.1 . Is this an authorization issue ?. If so which all roles I should give to the user? IF you have any idea about this please share some tips.

Hi Sahad,
Only few number range object types are available in the standard system:
Follow the link for help .
http://help.sap.com/saphelp_autoid2007/helpdata/EN/45/e2240c7abb56dde10000000a114a6b/frameset.htm
Follow the for setting up the others.
http://help.sap.com/saphelp_autoid2007/helpdata/EN/45/e2240c7abb56dde10000000a114a6b/frameset.htm

User Exit/BAdi for Number Range

Hi All,
Can anyone tell me is there any User Exit/BAdi for Number Range?
Rgds,
Trinadha

Hi,
Please check RHIV0001 through transaction SMOD.
Hope this helps.
Donnie

Reason behind error msg for number range when hiring through PA40

Hello Gurus,
I am getting the following error message when hiring thru PA40.
"No valid interval found(internal number assignment)"
Internal number range is already defined and the system is picking up the number from the defind range. When we press "return" button, the system accepts the input asks the user to save the data. The whole action is runnig fine except the error message.
Can you please explain why such error is comming?
Thanks in advance.
Best regards,
Soumyajit

Hi Soumyajit,
Have you used NUMKR feature... if not assign to your PA and for your country. Try this and let us know.
ward if it is helpfull.
Regards,
Raghu

Error : Message no. F5695 number range problem

hii all
i am facing a serious error. my 'SA' document type has picked up maximum number from the assigned no range. and so that i have assigned a new no range in SA document type
but when i am doing a new doument entry in Tcode - FB50 system pick the maximum number for the newly assigned no range and getting error messege
"Number range 6000 in year 22 has been used up for company code 2011"
Message no. F5695
Co Code = 6000
No Range = 22
Fiscal year = 2011
also when i am doing vendor invoice tcode = FB60, my system also shows the same error related to that document type. please help to resolve
i am also facing this no range problem when i try to post document from FI to CO. please see the link
http://forums.sdn.sap.com/thread.jspa?threadID=2132125&tstart=0
why system pick up the maximum no? i cant understand. i have checked the object RF_BELEG and RK_BELEG. in Tcode - SNRO. but there is no inconsistency. please also suggest what should be the standerd setting in the above object in Tcode-SNRO
please help. i am unable to post any document
Regards
Rajesh

hi Marssel Vilaça
In FBN1 22 no range already has taken maximum no and showing the messege
"Number range 6000 in year 22 has been used up for company code 2011"
Message no. F5695
This is for SA document type. also when i make entry with different document type such as vendor Invoice (DR), it also picks the maximum number from the no range
You can I adjust my counter in BKPF? and how can i use the remaining no range?? in FBN1 all the no range in internal, not external
i am also facing this no range problem in CO also (Tcode = KANK).
I just confused. please see my 1st thread
please resolve
Regards
Rajesh

CRM exit or BADI for Number range in follow up documents

Dear Experts,
Our requirement is to assign formatted number range to followup document which triggers automatically.
Kindly suggest me the badi or exits for the number range in CRM 4.0.
Thanks in advance.
with regards,
Rajesh C

Dear Experts,
Our requirement is to assign formatted number range to followup document which triggers automatically.
Kindly suggest me the badi or exits for the number range in CRM 4.0.
Thanks in advance.
with regards,
Rajesh C

Best practice for Number range buffering in SAP BI for FI Cubes

Hello Experts,
I have a question regarding Number range buffering. What i have observed is if we use more number of background processes while loading data, it for sure creaets locks with NRIV table bcoz of more calls for bufffered numbers with multiple processes.
But there is a clause in SNRO while we buffer 'Main Memory' that it should not be used for Financial documents. I understand that this is for serial assignment of numbers for Documents and acoounts on the backend ECC, but does this even stand true for DIM ID's which we are buffering while loading data into a FI Cube?
I have looked up a SAP note 1398444, which talks about NRIVSHADOW and parallel buffering and different use case scenarios.
Which one of those should be used if I need to buffer my Dimension while loading a FI Cube in BI with maximun background processes?
Please help me understand the difference?

hi,
well the message is just like a warning to signify that incase you load more number of new records then your existing limit of buffer then you will have to increase accordingly if no then you can ignore
if you want to understand the reason it like this....
if there is not sufficent buffers space available and then process would be rollback and the existing numbers will get lost resulting gaps between the document numbers and for applications like finance this is not desirable .
see doc more details
http://help.sap.com/saphelp_nw04/helpdata/en/95/3d5540b8cdcd01e10000000a155106/frameset.htm
Also if you are not sure you ask your basis team for Early watch alert report in their you can easily see whether number range buffering is really required or not, if yes then for which object/dimensions
Also check below SAP Note:449030 and 62077
hope it helps
regards
laksh

Current number storing table for number ranges

Hi all,
Can any one tell me which table stores the current number used for a Number range object.
My requirement is not to skip even a single number in Number Range.
Thanks in advance.

Gautham , I'm not disagreeing with you as Im not sure abt this, but I do remember a requirement similar to this few years back .As long as the SO is not saved , I believe we can get this number back.
Its weekend today in this part of the world so I dont have SAP system to check but I will get back to you tomorrow hopefully with a solution.
Mathews

OSS note for number ranges

Hi
I have question here.
I have an external number range assigned for specific group ofBusiness partners.
A0000001 - Z0000001.
I created a B with A0001 under this group. It accepts and saves it which should not happen and must throw an axception that the number does not fall in the Number range.
I was wondering whether there is any OSS number to implement it. Please let me know.
Thanks
Sonali

Hi,
This compare logic itself is applied to all programming world, not only ABAP I believe. The problem here is that it should check the length of the number assigned. But this also lead to problem, for example if the number range is defined as all letter combination: A - ZZZZZZZZZ, then it is not necessary to check the number length.
Thus what I think is that if the number range need to be improved, it might introduce a control that whether you need to restrict the length of the number range into a certain number.
But this also lead to another conflict, as this might be more specific requirement, customer can also fulfil it using customer codings, that is why we have introduced various interface for customer function modules. :P
The above is my personal comments regarding this issue. And if you do consider this should be a SAP bug, please feel free to post messages in service market place and let's see.
Hongyan

MIGO exit/ BADI for number range

Hi All,
When I am doing MIGO, then I want that after posting, a particular document no should be genrated which is wrt particular PO Number range.
For example, One PO No range is from, lets say, 1000 to 1999, then Doc no generated is, lets say 100 to 199,
and if PO no range is 2000 to 2999 then Doc no generated should be from 200 to 299.
So is there any BADI or user exit for the same or is there any other way of doing the same.
Please guide me.
Vinod.

Hi Mylene,
The actual rqmt is I want to generate MIGO doc number wrt PO Document type..
As you are asking that there could be multiple GR's for one particular PO, so all these GR's will be having one particular number range, lets say from 1000000000 to 1999999999.
I have got one enhancement ES_SAPMM07M, where its selecting number range from table NRIV.
But the problem is I am not able to implemet this from se18 or se19.
Now could u plz tell me the suggestions...
Vinod.

Re:User exit for number range assignment assignment to purchase order type

Hi All,
Is there any user exit which assign the purchase order type to number range.
Please help.
Regards,
vivek

Hi
Implementing the User exit
MM06E003
Number range and document number
Goto Transaction CMOD , Create a Z - Project proceed as follows:
Choose Create.
Describe the nature of the project by providing a short descriptive text.
Choose Save.
The system then prompts you to assign a change request. This assignment allows you to transport the project and its components into a productive system once you have completed it.
Specify which SAP enhancement packages you want to include in your project by choosing SAP enhancements.
Enter the Enhancement MM06E003.
Click on Components
Docuble Click on the Exit & it will Take you to the Function module . Write your ABAP code in the Include ZXM06U17
Activate the Z - Project
Thanks & Regards
Kishore

Enhancement for number range

Hi Experts,
when I am creating any material if number range is already define in SPROthen material number is automatically generating , but I am not saved the new material which I have created . and I again I create new material then next number is generating . but previous number is not stored into MARA table .
My requirment is next number should be max material number +1 .
Please let me know where i can do this enhancement .

>
Ajay Pandey wrote:
> Hi Experts,
>
> when I am creating any material if number range is already define in SPROthen material number is automatically generating , but I am not saved the new material which I have created . and I again I create new material then next number is generating . but previous number is not stored into MARA table .
> My requirment is next number should be max material number +1 .
>
> Please let me know where i can do this enhancement .
Once NUMBER_GET_NEXT is called the next free number will be automcatically Assigned. So the next number automatically increased. once it is generated you cannot reuse that.
Check this badi this may be helpful.
BADI_NUMBER_GET_NEXT

Error in EA27 BBP for Number ranges

Similar Messages

Maybe you are looking for