Error in EBP User

Dear SRMers
System Information: SRM 4.0, R/3 4.6 C
In PPOSA_BBP, when doing a check on the user in the Org structure, I am getting the following 2 STOP errors:
1. ERROR in EBP User XXXXXXX
2. HR/ALE Verteilung ist aktiv. Verteilen Sie die Benutzerdaten neu.
Which in English means: HR/ALE Distribution is active.
Redistribute the user data.
Please let me know how to solve this issue.
Points will be rewarded for answers.
Thanks in advance.
Bobby

Hi Bobby,
It seems the HR Integration is active in the system.In such a case the system will not allow you to create any new users in EBP.
You can only create users in your HR system (R/3 Back end) and can replicate them to EBP otherwise deactivate that HR integration in the table T77S0 then you can able to create/ use EBP users.
In that table deactivate following Sem. abbreviations for the group ID HRALX
1. HRAC
2. OBPON
3. PBPHR
Hope this resolves your issue.Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

Similar Messages

SRM HR Org Structure - error in EBP User

We are on SRM 4.0 (EBP 5.) and have replicated our R/3 org structure. We run a nightly batch job that updates the org structure in SRM with any changes made in R/3. Some users are unable to use SRM due to not being replicated properly into SRM. When you view the org structure via PPOMA_BBP - Change Attributes Check there are two STOP signs - with the following error messages
STOP   BBP Error in EBP User xxxxx
STOP   HR/ALE Verteilung ist aktiv. Verteilen Sie die Benutzerdaten neu.
When I translated the German error message, it translated to
HR/ALE Distribution is active.
Redistribute the user data.
How do I redistribute the user data to correct the problem so the users can use SRM again?
Also, where can I change the german transaction into English.
Any assistance would be greatly appreciated.
Thanks
Jan Stover

Hi Jan,
     Follow these steps in R/3
1. Go To PA20. Check the Personal ID for the user for whom it shoots an error
2. Go To PFAL. You might have to use a variant for this transaction. Feed the User's Personal # and the target system.
This will push an IDOC from R/3 to SRM with the org data
     Follow these steps in SRM:
1. Go to SE38 and execute this report RBDAPP01
This report will process the incoming IDOC to the Org Structure in SRM
Regards,
Anand

Error message in creating EBP users from existing SU01 users

I am getting the following error messages when i try to create EBP users from existing SU01 users using users_gen: Error during creation of user: User not created or error(s) occurred during user creation. ``Central person`` already exists for user (BBPU_MESSAGES 042). Pls what does it mean and how do i solve this?

Babalola-
The message is indicating that the user you are attempting to create was previously created in the EBP system.
First I would try to correct the user via users_gen using the "check users" option. This may repair the user, but if the user has lost the association to the org then you will need to take some manual steps to re-establish the links for the user in the org details.
If this doesn't correct it, then use transaction PP01 to correct/verify the following relationships for the user. Start with the org unit and work your way down looking for the broken link/s.
Here are the required relationships for the objects:
ORG UNIT:
Relationship     Object
B 003          Position(of user)
POSITION:
Relationship     Object
A 003          Org Unit
A 008          Central Person (of user)
A 008          User
CENTRAL PERSON:
Relationship     Object
B 008          Position
B 207          Business Partner
B 208          User
USER:
NONE
BUSINESS PARTNER:
NONE
Hope this helps you.
b

Error while migrating users using CSSImportExportUtility

Error while migrating users using CSSImportExportUtility
I'm tring to export all user and group information from a Hyperion Shared Services 9.2.1 by using CSSExport.bat
When there was only native directory in HSS, i can export these information successfully.
But when I enabled NTLM external user authentication following error occurred:
Exception in thread "main" java.lang.UnsatisfiedLinkError: getOSVersion
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.getOSVersion(Native Metho
d)
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.<clinit>(Unknown Source)
at com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(Unknown
Source)
at com.hyperion.css.CSSAPIExtnImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.exchange.NativeProviderManager.<init>(Unknown Source
at com.hyperion.css.exchange.ImportExportManager.cssExport(Unknown Sourc
e)
at com.hyperion.css.exchange.CommandUtility.run(Unknown Source)
at com.hyperion.css.exchange.CommandUtility.main(Unknown Source)
I searched reference documents on the web, found this article: (http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/mdm_111110_readme.html)
Troubleshooting Tip: If HSS is configured for an NTLM provider, DRM services may not start due to error: "Exception Emdm_Exception with message 'Could not Initialize CSS. Error: 'getOSVersion'."
You may receive the following error after clicking the "Enable CSS" button in DRM Console: “LoadLibrary("C:\Hyperion\Master Data Management\mdm_ntier_css_validator.dll") failed - The specified module could not be found.”
To resolve both of these conditions, update the Windows System Path on the Data Relationship Management server with the applicable JRE and CSS pathing below.
NOTE: Reboot the Data Relationship Management server machine after making any changes to the Windows Path.
NOTE: Ensure that only one JRE version and one CSS version are referenced in the Windows Path.
? For HSS 9.3.1:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.1\bin;
? For HSS 9.3.0:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.0\bin;
? For HSS 9.2.0.3:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0.3\bin;
? For HSS 9.2.0:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0\bin;
I found these is no directory "%HYPERION_HOME%\common\CSS\9.2.0\bin;" exists but "%HYPERION_HOME%\common\CSS\9.2.1\bin;"
I configured PATH by setting to above, and tried CSSExport again, still failed.
Than I disabled the NTLM is HSS, tried CSSExport again. It was successful.
So I am convinced that the problem caused by NTLM or PATH environment variable or some files associated.
Does anybody know the solution ?

I recommend you upgrade at least to 10.1.0.5. 10.1.0.2 comes with the very first version of csalter.plb, which has not the current implementation. From and to which character set do you try to migrate?
-- Sergiusz

Getting error while provisioning user to AD - OIM 11g R2

Hi,
I have installed the AD connector and I am able to do the user and group reconciliation between AD and OIM 11g R2.
But when I am trying to provision the user to AD, I am getting the below error :
oracle.iam.connectors.icfcommon.prov.ICProvisioningManager : createObject : Error while creating user[[
java.lang.NumberFormatException: null
     at java.lang.Long.parseLong(Long.java:375)
     at java.lang.Long.parseLong(Long.java:468)
     at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.init(ICProvisioningManager.java:104)
     at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.init(ICProvisioningManager.java:123)
     at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.createObject(ICProvisioningManager.java:267)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADIDCCREATEOBJECT.CREATEOBJECT(adpADIDCCREATEOBJECT.java:109)
     at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADIDCCREATEOBJECT.implementation(adpADIDCCREATEOBJECT.java:54)
     at com.thortech.xl.client.events.tcBaseEvent.run(tcBaseEvent.java:196)
     at com.thortech.xl.dataobj.tcDataObj.runEvent(tcDataObj.java:2492)
     at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(tcScheduleItem.java:3148)
     at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(tcScheduleItem.java:716)
     at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
     at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
     at com.thortech.xl.dataobj.tcORC.insertNonConditionalMilestones(tcORC.java:847)
     at com.thortech.xl.dataobj.tcORC.completeSystemValidationMilestone(tcORC.java:1162)
     at com.thortech.xl.dataobj.tcOrderItemInfo.completeCarrierBaseMilestone(tcOrderItemInfo.java:757)
     at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostInsert(tcOrderItemInfo.java:173)
     at com.thortech.xl.dataobj.tcUDProcess.eventPostInsert(tcUDProcess.java:235)
     at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
     at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
     at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2910)
     at com.thortech.xl.dataobj.tcORC.autoDOBSave(tcORC.java:3008)
     at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(tcOrderPackages.java:471)
     at com.thortech.xl.dataobj.util.tcOrderPackages.orderPackageForUser(tcOrderPackages.java:180)
     at com.thortech.xl.dataobj.tcOIU.provision(tcOIU.java:639)
     at com.thortech.xl.dataobj.tcOIU.eventPostInsert(tcOIU.java:357)
     at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
     at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
     at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2910)
     at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(tcUserProvisionObject.java:288)
     at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:591)
     at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
     at oracle.iam.provisioning.spi.DOBProvisioningUtil.provisionObject(DOBProvisioningUtil.java:128)
     at oracle.iam.provisioning.spi.DOBProvisioningMechanism.provision(DOBProvisioningMechanism.java:341)
     at oracle.iam.provisioning.impl.ProvisioningServiceImpl$4.process(ProvisioningServiceImpl.java:483)
     at oracle.iam.provisioning.impl.ProvisioningServiceImpl$4.process(ProvisioningServiceImpl.java:471)
     at oracle.iam.platform.tx.OIMTransactionCallback.doInTransaction(OIMTransactionCallback.java:13)
     at oracle.iam.platform.tx.OIMTransactionCallback.doInTransaction(OIMTransactionCallback.java:6)
     at org.springframework.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:128)
     at oracle.iam.platform.tx.OIMTransactionManager.oimExecute(OIMTransactionManager.java:46)
     at oracle.iam.provisioning.impl.ProvisioningServiceImpl.provision(ProvisioningServiceImpl.java:471)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy380.provision(Unknown Source)
     at oracle.iam.provisioning.api.ProvisioningServiceEJB.provisionx(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy379.provisionx(Unknown Source)
     at oracle.iam.provisioning.api.ProvisioningService_p7m7x_ProvisioningServiceRemoteImpl.__WL_invoke(Unknown Source)
Please help me in solving this issue.
Thanks.
Edited by: user9212679 on May 9, 2013 4:17 AM

Hi Kevin,
Thanks for the reply. As suggested by you I have assigned the default value as 0 for all the checkbox type in form designer for AD User form but still I am getting the same error while provisioning the AD resource.
Please help.

Can we display custom error message in user decision step screen.

Hi,
My requirement is to display error message when approver selects reject button in user decision step.
based on some condition i need to display error message in user decision screen when approver tries to
reject .
Please help
Thanks,
Phani

Hi ibrahim,
Thanks for your Replay.
steps
1. cretae global class with interface IF_SWF_IFS_WORKITEM_EXIT.
2. cretae Event with importing parameter.
where i need to call EVENT_RAISED method ,do inned to call that method in
IF_SWF_IFS_WORKITEM_EXIT ?
how SWRCO_EVENT_AFTER_EXECUTION value is passed to method EVENT_RAISED ?
Thanks,
phani

Help needed, M getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem but instead I cannot login I to my itune account.

Help needed,
I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still I cannot login I to my itune account. Same message keeping. Popping up, this problem started supricly today.

Take a look at the instructions here.
http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html

My ipad receives email with the hotel wifi but will not send. The error message is "user name or password for ........is incorrect" but both are correct and unchanged. Restarting iPad didnt help.

My iPad receives email on the hotel wifi but will not send. The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged. Restarting iPad did not help.

I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message. I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message. Is there some trick to this? Very frustrating!

SRM Post Installation - Webadmin and EBP users

Hello SRM gurus,
I am new to SDN but I am familiar with SAP Basis Administration. I have recently installed the SRM 5.0(NW04s). I configured the shopping cart link and the integrated ITS. I was asked to create userid for webadmin (who creates users through the browser). I searched through SDN but was not able to find it. Please let me know the procedure to get the webadmin and creation of EBP users. I appreciate your time and business. Thanks in advance. Waiting for your replies......
Raj

Hello Raj,
1. Create webadmin user in SU01 transaction, assign SAP_BBP_STAL_ADMINISTRATOR role
2. Go to USERS_GEN transaction and create user from existing SU01 user
3. Go to PPOMA_BBP transaction and search the created webadmin user, Select position level and check the ROLE attributes. If no ROLE attributes are maintained, add SAP_BBP_STAL_EMPLOYEE
4. logon to SRM with webadmin user
Regards,
Masa

Error loading C:\Users\User Name\AppData\Local\HpWebNotifier\SyncNetOffice.dll

Everytime I start up my computer I get a pop-up that states: 'Error loading C:\Users\User Name\AppData\Local\HpWebNotifier\SyncNetOffice.dll'
My computer and printer work fine but this message is annoying. I can't figure out what the problem is. I am wondering if it is an issue from an old printer that I used to be connected to that I've already uninstalled. Does anyone have any ideas how I can resolve this issue?
Thanks!
This question was solved.
View Solution.

Hello lisabar90,
What operating system is the computer?
What model computer are you using?
Try this click on start and then run and type msconfig and hit enter.
(if your computer doesn't have a run type msconfig in the search box and click on the application)
Go to the startup tab and see if you can see a reference to that location. Uncheck it and reboot your computer.
Post back your results.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Error propagating servlet user to peer?

Hello,
We currently have a Windows 2003 Server 32bit running ColdFusion 8.01 with 3 instances named: cfusion, Instance1 and Instance2. Instance 1 and Instance 2 are clustered together and serving all our sites in IIS. We're hosting just over 200 sites with approx. 6-7 hits a second.
ColdFusion is running with all the latest hot fixes and patches. The JVM is version 1.6_24.
For a while now one of the instances in the cluster randomly locks up a few times a month, fails to return pages and has high cpu usage. We'd normally just restart the instance and things would return to normal. It's bad to ignore things but it's only recently I've had a chance to look into the cause of these lock ups.
Last night both the instances appeared to fail. We have an external monitor that hits our sites every 5 minutes to ensure they are still running.
Scanning through the JRun logs at about the time we received our first monitor warning there are a bunch of what appear to be propagation errors on both instances.
Logs from Instance1:
22/03 07:10:14 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:16 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:17 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:18 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:20 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:21 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:23 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:23 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:24 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:24 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:25 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:26 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:26 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:26 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:26 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:27 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:28 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:28 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:10:29 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketTimeoutException: Read timed out
22/03 07:17:43 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset by peer: socket write error
Logs from Instance2:
22/03 07:10:40 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset by peer: socket write error
22/03 07:10:40 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset
22/03 07:10:40 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset
22/03 07:10:40 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset by peer: socket write error
22/03 07:10:40 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset by peer: socket write error
22/03 07:10:40 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset by peer: socket write error
22/03 07:10:40 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset by peer: socket write error
22/03 07:10:40 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset by peer: socket write error
22/03 07:10:40 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset by peer: socket write error
22/03 07:10:40 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset by peer: socket write error
22/03 07:10:40 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset by peer: socket write error
22/03 07:10:41 info Clusterable service JRunRMIBroker discovered ClusterManager on xxx.xxx.xxx.xxx:3862, cluster domain: cluster1 (Lookup Service's JINI-ID: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx)
22/03 07:10:42 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset
22/03 07:10:42 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.io.EOFException
22/03 07:10:42 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset
22/03 07:10:42 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset
22/03 07:10:42 warning Error propagating servlet user to peer: error during JRMP connection establishment; nested exception is:
    java.io.EOFException
22/03 07:10:43 error ROOT CAUSE:
java.lang.OutOfMemoryError: unable to create new native thread
    at java.lang.Thread.start0(Native Method)
    at java.lang.Thread.start(Thread.java:640)
I suspect it's a JVM memory issue, however I have no way of extracting or creating memory logs without bringing all our sites down again.
I only know the basics of how the JVM heap space works but my guess is that one of the instances can't create any more threads because the PermGen space has run out and it's killing the cluster.
Here's our current JVM settings: java.args=-server -Xmx768m -Xms768m -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -Dcoldfusion.fckupload=true -Dcoldfusion.rootDir={application.home}/
Has anyone come across this issue before or has any ideas on how to better debug the issue with minimal impact on uptime?

Well the classes should be in WEB-INF/classes, but I don't think that's your problem.
Getting an applet to connect to a db is notoriously difficult (so I've heard - I've never tried it), so having the applet talk to the servlet with the servlet in turn talking to the db is a good idea.
"i cant see the error message because it wont print in the VM,"
That doesn't sound right. What does your error handling code look like?
" MySQL it also has access permissions for some weird reason."
MySQL is set up so that user credentials are only valid from a specific host unless you explicitly tell it that a user can connect from anywhere. This is native to MySQL and has nothing to do with java or JDBC.
Most of the code you posted throws Exceptions. Are you catching them, and if so what did they say?

TS3899 Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect

Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect". Help

Hotmail is having problems:
http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
http://www.engadget.com/2013/08/14/outlook-outage/
http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
http://mashable.com/2013/08/14/outlook-down/
http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

Error while creating user for a domain

i am developing a web-application which is hosted on tomcat server.
it is creating domains and users at another remote domain server.
localy it is working fine..
but when i test it online..
the problem is,
sometimes it works fine ,the domains are being creted at remote server..
but sometimes it delivers error that domain at remote server can not be created.
Is it due to fact that theat some errornous code in the buffer of application have older versions of applications causing the error ?
Code::
if(strPlanId.equalsIgnoreCase("3")) {
 //Create domain account for planid=3 plantype=Cp
 blnOK=false;
passwordGS comes from database
strUrl="http://sosync.net/sosync/admin?pwd="+passwordGS+"&action=user_createdomain&domain="+strSubDomain+".gosync.net&adminpassword=aspire3002&diskquota="+longdk;
 u=new URL(strUrl);
 uc=(HttpURLConnection)u.openConnection();
 code=uc.getResponseCode();
 if(code == 200) {
 rUrl="/TransCompleteServlet";
 blnOK=true;
 uc.disconnect();
 } else {
 rUrl="/GSView.jsp?page=GSError.jsp?REQ=Unknown";
 if(blnOK) {
 String strUrlUser="http://gosyncdesk.net/gosync/admin?pwd="+passwordGS+"&action=user_createuser&username="+strEmailId+"&password="+strPassword+"&domain="+strSubDomain+".gosync.net&communityname=Default&firstname="+user.getFirstName()+"&lastname="+user.getLastName();
 URL u1=new URL(strUrlUser);
 HttpURLConnection uc1=(HttpURLConnection)u1.openConnection();
 code=uc1.getResponseCode();
 response1=uc1.getResponseMessage();
 if(code == 200) {
 rUrl="/TransCompleteServlet";
 String strUrlTZ="http://gosyncdesk.net/gosync/admin?pwd="+passwordGS+"&action=user_setuserpreference&username="+strEmailId+"&domain="+strSubDomain+".gosync.net&name=web_timezone&value='"+timeZone+"'";
 u=new URL(strUrlTZ);
 uc=(HttpURLConnection)u.openConnection();
 code=uc.getResponseCode();
 if(code != 200) {
 rUrl="/GSView.jsp?page=GSError.jsp?REQ=Unknown";
 } else {
 rUrl="/GSView.jsp?page=GSError.jsp?REQ=Unknown";
 mailUtil.sendMail_admin("Error In Creating User for the Domain","While creating domain for "+user.getEmail()+" user could not be created due to following reason: "+response1+" GoSync UserName:"+strEmailId+" GoSync Password:"+strPassword+" GoSync Domain :"+strSubDomain+".gosync.net and URl String was :"+strUrlUser+"");
 }

if the problem is caching try setting the useChasses to false
uc.setUseCaches(false);

Error while creating user on Unix through OIM timeout waiting for user password

Hello all ,
we made integration with Unix using connector , while creating user we receive the following error
<Jun 27, 2013 1:30:14 PM AST> <Error> <ORACLE.IAM.CONNECTORS.ICFCOMMON.PROV.ICPROVISIONINGMANAGER> <BEA-000000> <oracle.iam.connectors.icfcommon.prov.ICProvisioningManager : createObject : Error while creating user
org.identityconnectors.framework.common.exceptions.ConnectorException: Exception occured while setting the password.org.identityconnectors.framework.common.exceptions.OperationTimeoutException: Command timed-out while waiting for: new[\s](unix[\s])?password:
 at org.identityconnectors.genericunix.GenericUnixConnection.setUserPassword(GenericUnixConnection.java:866)
 at org.identityconnectors.genericunix.operation.GenericUnixCreate.setUserPassword(GenericUnixCreate.java:193)
 at org.identityconnectors.genericunix.operation.GenericUnixCreate.analyzeResult(GenericUnixCreate.java:233)
 at org.identityconnectors.genericunix.operation.GenericUnixCreate.createOp(GenericUnixCreate.java:180)
 at org.identityconnectors.genericunix.operation.GenericUnixCreate.create(GenericUnixCreate.java:111)
 at org.identityconnectors.genericunix.GenericUnixConnector.create(GenericUnixConnector.java:200)
 at org.identityconnectors.framework.impl.api.local.operations.CreateImpl.create(CreateImpl.java:80)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at org.identityconnectors.framework.impl.api.local.operations.ConnectorAPIOperationRunnerProxy.invoke(ConnectorAPIOperationRunnerProxy.java:93)
 at $Proxy363.create(Unknown Source)
any one can support me how to fix this

Try increasing the commandTimeout from 100seconds to 200seconds and see if this works?
Also, look at the Section 5.2.5 in the connector doc.

Password Violation error while creating users from Admin interface

Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay

Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay

Error in EBP User

Similar Messages

Maybe you are looking for