Error in ECC6.0(Windows GUI 640 Exception 0xC0000005 with ID=0x590A1113/0x)
Hi ,
In our environment , SAP is ECC6.0 installed in HP-Unix.Some time user face problem "Windows GUI 640 Exception 0xC0000005 with ID=0x590A1113/0x590A1113 occurred (PL=27)" and it spread to all computer . I have updated latest patched for GUI also , but it the problems seems occur.
Please let me know how to correct this problem and why its occuring again and again
Thanks and Regards
Brijesh Prasad
If this error is reproducible and you´re on the latest patchlevel I suggest you create an OSS call and attach the tracefile generated.
Markus
Similar Messages
-
Error when trying to use (GUI Wizards) on Table with BLOB, CLOB columns.
I enjoyed watching the demo of ODP.NET/VS 2005 Environment where you can just drag the new command builders, data sets, etc.. but when I try this with a table that contains a BLOB and CLOB column it returns an error and basically cannot build the SQL needed to process these field types.
I would assume it could do this natively since it is somewhat of a primitive type. I also tried to point it to a Stored Proc that returned a blob and it caused an error when building the SQL.
So it appears it is not possible to use the GUI data access wizards for these column types. I can use them in code with the ODP.NET with no problems but it would be nice to be able to utilize the GUI Command Builders, etc...blob and clob are not supported i guess. oracle is a bit sluggish when it comes to VS and MS products!
-
What can I do if I get an internal power error after upgrading to Windows 10?
QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
First, you'll need to quickly set the boot options to Safe Mode:
1. Hold the Windows key and press 'R' to open the run box.
2. Type MSCONFIG, then press ENTER.
3. Select the BOOT tab.
4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
5. Click Apply, then OK.
6. Click Restart. (If prompted, click Restart anyway.)
From Safe Mode disable the AMD Display Driver:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Disable, then click Yes to confirm.
7. Click Close.
8. Hold the Windows key and press the 'R' key to open the run box.
9. Type MSCONFIG, then press ENTER.
10. Select the BOOT tab.
11. Uncheck Safe boot.
12. Click Apply, then OK.
13. Click Restart. (If prompted, click Restart anyway.)
From Windows 10 started with the AMD Display Driver disabled:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Update Driver.
7. Click Search automatically for updated driver software.
8. An AMD driver should be found and installed.
The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.I'm having the same problem. I got error message 21. I went to apple store. they are saying i have a hardware error. Really, my phone was working before the update. Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child.
Help please,
I will be glad to go back to the older software update -
Error message with Vista and 7.2: Windows-No Disk Exception Processing Mess
I just got a new Dell computer with Windows Vista and I am trying to put iTunes on it. I can install it fine from the original CD, and then I am prompted to update it to 7.2. After updating, this is the message that I get: Windows-No Disk, Exception Processing Message 0xc0000013 Parameters 0x7620023C 0c847CDB4C 0x7620023C (Cancel Try Again Continue). If I click on any button countless times, iTunes does open up but then I get the blue screen dump message. I have installed and uninstalled it many different times and have tried any of the additional updates/patches with no effect. I did not see this message anywhere else in the forum, anyone able to help?
Unexplained Crashes, lock-ups, Failure to boot and boot-looping in Vista and XP and MAC OS-X.
Have a USB2 external hard drive hooked up to your system? A number of these devices are starting to show up as the cause of the problems listed above. The cause has been linked to drives that were manufactured a year or more ago. Note I said manufactured not purchased. The cause is poor USB 2.0 specifications that the drive case manufactures followed which has deteriorated with age causing the above failures. If this happens to you try disconnecting your external drive and see if your problem goes away. A couple of multifunction printers have also been the cause of similar problems but most of these have higher visibility on internet search engines than the external hard drives.
Sorry, no KB article link. The above is from my reseller, who deals in imaging workstations exclusively.
Hunt -
Error in ECC6 During installation
Dear all
Error in ECC6 During installation , the following contents is get from sapnst_dev.log
148556: if ( componentToBeCalled == 'NW_Usage_Types_Configuration_BI_ind_ind_ind_ind')
148557:
148560: if ( componentToBeCalled == 'NW_Call_Offline_CTC_ind_ind_ind_ind')
148561:
148564: }
ERROR 2008-06-27 07:43:37 [iaxxejsbas.cpp:178]
EJS_ErrorReporter
FJS-00003 TypeError: spStringRE.exec(labelString) has no properties (in script NW_Onehost|ind|ind|ind|ind, line 63483: ???)
ERROR 2008-06-27 07:43:37
FCO-00011 The step validateContent with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|SAP_Software_Features_GetContent|ind|ind|ind|ind|0|0|validateContent was executed with status ERROR .
TRACE
<html><head></head><body><p>An error occurred while processing service <b>SAP ERP 2005 Support Release 2 > SAP Systems > Oracle > Central System > Central System Installation</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS</b>.</p></body></html>
TRACE [iaxxgenimp.cpp:1155]
showDialog()
waiting for an answer from gui
INFO 2008-06-27 07:45:05 [iaxxgenimp.cpp:782]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|SAP_Software_Features_GetContent|ind|ind|ind|ind|0|0|validateContent".Up !?
-
Windows - No Disk Exception Processing Message on iTunes start-up
Every time I start up iTunes I get this annoying Windows Error Message.
Windows – No Disk
Exception Processing Message c000001e Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c
Cancel Try Again Continue
If I click any combination of the three buttons many times it eventually goes away.
Then, it also happens when doing any operation with a song file such as conveting format or it rate. In this case it may lock up iTunes and require a C-A-D to get out of the application.
HELP!!
I've tried updating the iTunes software
Medion Windows XP
Medion Windows XPUnexplained Crashes, lock-ups, Failure to boot and boot-looping in Vista and XP and MAC OS-X.
Have a USB2 external hard drive hooked up to your system? A number of these devices are starting to show up as the cause of the problems listed above. The cause has been linked to drives that were manufactured a year or more ago. Note I said manufactured not purchased. The cause is poor USB 2.0 specifications that the drive case manufactures followed which has deteriorated with age causing the above failures. If this happens to you try disconnecting your external drive and see if your problem goes away. A couple of multifunction printers have also been the cause of similar problems but most of these have higher visibility on internet search engines than the external hard drives.
Sorry, no KB article link. The above is from my reseller, who deals in imaging workstations exclusively.
Hunt -
How do I get rid of "Windows No Disk Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c" when firefox starts up, I have to hit continue twice to get past this error message. Then all is OK. The solution shown for this thread does not make sense.
== This happened ==
Every time Firefox opened
== Firefox was updatedIn Google, search for ""Windows No Disk Exception Processing" (including quotation marks). Lots of different answers out there.
632 results on this search limited to the last year:
https://encrypted.google.com/advanced_search?q=%22Windows+No+Disk+Exception+Processing%22&hl=en&lr=&tbs=qdr:y&prmd=df -
Adding a new server in the menu of SAP GUI 640
Hello Everybody,
While adding a new server to the menu of SAP GUI 640 using Server Tab after entering all details like :
1] SAP System ID
2] Hostname where message server is running
3] SAP ROUTER :None
After filling all the above details and after pressing the Generate List Button I am getting the following error .Please help me to know why this error is coming and suggest a solutio for adding a new server to my SAP GUI 640.But I am able to add a new server using User defined tab but I want to add a new server using Server tab.
Below is error details which I am getting:
Error:service'sapmsSBX'unknown
Wed Jan 09 06:41:13 2008
Release 640
Component NI(network interface),version 37
rc=-3,module ninti.c,line 463
Detail NiPGetServByName: service 'sapmsSBX' not found.
Thanks and Regards,
Ashish Thakkar.Hi,
check etc/services for sapmsSBX entry. If missing - add it (i.e. sapmsSBX 36XX/tcp - where XX is your instance no.)
Add an extra [Enter] after last line of etc/services.
Regs,
FS -
Epson Stylus Pro 9800 errors on 32-bit Windows 7 with Adobe CS4
Epson Stylus Pro 9800 errors on 32-bit Windows 7 with Adobe CS4
Question: We are experiencing some major errors with printing to our Epson Stylus 9800 Pro. Some of our large files are spooling about 16K, then crashing Photoshop. Sometimes we are getting partial prints (the left most 3-4 inches of print, or the file starting to print about 1/2 way into the file itself), sometimes it just spools for a few minutes, then stops, with nothing coming from the printer at all.
At Epson's request, we have tried the following:
reinstalling Windows 7 print driver
Reinstalling Adobe CS 4
Installed NEW NIC in printer
Installed new network line to printer
Installed new main board on printer
Printed from a PC directly connected to printer via USB and crossover cable
This issue is very bizarre in that it is random and sporatic. Same file will cause one of the above errors, then, another attempt to print same file will be successful. We have several Windows 7 machines that get the issue, while several Windows XP machines are fine. Epson instructed us to install the newest (win7) driver on the XP machines, issue then affects XP machines. Uninstalling new driver and re-installing old driver on XP machines resolves issue on XP machines.
Is this an issue with the Epson driver? CS4 on Windows 7? Or some other malady?
When Photoshop crashes, the following error log is created: Log Name: Application
Source: Application Error
Date: 10/6/2010 1:31:16 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: _PCNAME_._OUR_DOMAIN_.com
Description:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: E_FJBLDBE.DLL, version: 0.1.1.7, time stamp: 0x469dea6c
Exception code: 0xc0000005
Fault offset: 0x0001c9ba
Faulting process id: 0x1cf8
Faulting application start time: 0x01cb657c010cac1c
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: C:\Windows\system32\spool\DRIVERS\W32X86\3\E_FJBLDBE.DLL
Report Id: 85870535-d16f-11df-b849-406186f3bc8f
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-06T17:31:16.000000000Z" />
<EventRecordID>5497</EventRecordID>
<Channel>Application</Channel>
<Computer>_PCNAME_._OUR_DOMAIN_.com</Computer>
<Security />
</System>
<EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>E_FJBLDBE.DLL</Data>
<Data>0.1.1.7</Data>
<Data>469dea6c</Data>
<Data>c0000005</Data>
<Data>0001c9ba</Data>
<Data>1cf8</Data>
<Data>01cb657c010cac1c</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>C:\Windows\system32\spool\DRIVERS\W32X86\3\E_FJBLDBE.DLL</Data>
<Data>85870535-d16f-11df-b849-406186f3bc8f</Data>
</EventData>
</Event>Giving that a go.
Thanks! -
Expdp fails with error ORA-39006: internal error writing on a windows share
Hi!
I need to get the following configuration working:
Linux Server (CentOS 5 32 bits) with Oracle 11.2.0.1.0
Windows Server 2003 SP2 32 bits.
On the windows server I have created a user called oracle, who is member of oinstall and dba groups. (On Linux username, and group membership is the same).
After that, I share a directory on D:\data_pump (I gave the full control of directory to oracle user). I mount the windows share on my linux as follows:
mount -t cifs //winserver/data_pump /u04/oradata/data_pump -o user=oracle,password="pass",uid=oracle,gid=oinstall
As the linux oracle user I'm capable of create and edit files, but:
I connect to my database, create the directory called DATA_PUMP pointing to my cifs mount point, and, after that, I issue the following expdp sentence:
expdp system DIRECTORY=DATA_PUMP DUMPFILE=test4.dmp LOGFILE=test4.log FULL=yes
And I get the following error:
ORA-39006: internal error
Looking at expdp log I found the following information:
ORA-39097: Data Pump job encountered unexpected error -31643
ORA-39065: unexpected master process exception in FILE
ORA-31643: unable to close dump file "/u04/oradata/data_pump/gaston4.dmp"
ORA-19510: failed to set size of 1 blocks for file "/u04/oradata/data_pump/gaston4.dmp" (block size=4096)
ORA-27045: unable to close the file
Linux Error: 5: Input/output error
Additional information: 4
Do you have any suggestions?
Thanks in advance.Hi, see metalink:
Bug 8313127: EXPDP EXPORT TO CIFS MOUNT ON WINDOWS FROM LINUX FAILS
http://kr.forums.oracle.com/forums/thread.jspa?threadID=923398 -
GUI 640 Patch 4274 smaller than required(8). Continue with Alpha Screen
Hi,
the Screen painter gives following error while opening any screen in the program.
"GUI 640 Patch 4274 smaller than required(8). Continue with Alpha Screen"
Please suggest.
Regards
VivekHi,
the Screen painter gives following error while opening any screen in the program.
"GUI 640 Patch 4274 smaller than required(8). Continue with Alpha Screen"
Please suggest.
Regards
Vivek -
I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!
yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.
-
Error during ecc6.0 installation ..plz help asap
Hi all
i am installing ecc 6.0 on windows 2003 standard 64 bit
with database ibm db2 version 9
i am getting the following error during the installation phase
error during abap import phase
i am attaching error log files
import.monitor.log
===============================================================
INFO: 2007-05-03 22:17:51
Import Monitor is started.
CONFIG: 2007-05-03 22:17:51
Application options:
dbCodepage=1100
dbType=DB6
extFiles=no
importDirs=E:\idesins\51032413\1of6\EXP1;E:\idesins\51032413\2of6\EXP2;E:\idesins\51032413\3of6\EXP3;E:\idesins\51032413\4of6\EXP4;E:\idesins\51032413\5of6\EXP5;E:\idesins\51032413\6of6\EXP6;E:\idesins\51032413\6of6\EXP7;E:\idesins\51032413\6of6\EXP8;E:\idesins\51032413\6of6\EXP9;E:\idesins\51032413\6of6\EXP10;E:\idesins\51032413\6of6\EXP11
installDir=C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS
jobNum=3
loadArgs= -stop_on_error -loadprocedure fast
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2007-05-03 22:17:51
List of packages with table structure: 'SAP0000'.
CONFIG: 2007-05-03 22:17:51
List of packages with views: 'SAPVIEW'.
TRACE: 2007-05-03 22:17:51 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS\DDLDB6.TPL' template file is started.
INFO: 2007-05-03 22:17:51 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS\DDLDB6.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2007-05-03 22:17:51
Data codepage 4103 is determined using TOC file 'E:\idesins\51032413\1of6\EXP1\DATA\SAPAPPL0.TOC' for package 'SAPAPPL0'.
INFO: 2007-05-03 22:17:53
Version table 'SVERS' is found in STR file 'E:\idesins\51032413\4of6\EXP4\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2007-05-03 22:17:53
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\idesins\51032413\4of6\EXP4\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is started.
TRACE: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -ctf I E:\idesins\51032413\4of6\EXP4\DATA\SAPSDIC.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS\DDLDB6.TPL" SAPSDIC.TSK DB6 -l SAPSDIC.log
TRACE: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -stop_on_error -loadprocedure fast
ERROR: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with R3load error.
Process 'E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -stop_on_error -loadprocedure fast' exited with return code 2.
For mode details see 'SAPSDIC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2007-05-03 22:18:21
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2007-05-03 22:18:21
1 error(s) during processing of packages.
INFO: 2007-05-03 22:18:21
Import Monitor is stopped.
=============================================================
import.monitor.java.log
======
java version "1.4.2_14"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_14-b05)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_14-b05, mixed mode)
Import Monitor jobs: running 1, waiting 18, completed 0, failed 0, total 19.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 18, completed 0, failed 1, total 19.
=========================
sapsdic.log
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: version R7.00/V1.4
Compiled Aug 31 2006 22:40:33
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -stop_on_error -loadprocedure fast
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
(CREATE TABLE "/SDF/PAT03" ( "PATCH" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "SHORT_TEXT" SAPDB6VARCHAR(60) DEFAULT ' ' NOT NULL , "STATUS" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "DELIV_DATE" SAPDB6VARCHAR(8) DEFAULT '00000000' NOT NULL , "DELIV_TIME" SAPDB6VARCHAR(6) DEFAULT '000000' NOT NULL , "RESPONSIBL" SAPDB6VARCHAR(12) DEFAULT ' ' NOT NULL , "IMPLE_DATE" SAPDB6VARCHAR(8) DEFAULT '00000000' NOT NULL , "IMPLE_TIME" SAPDB6VARCHAR(6) DEFAULT '000000' NOT NULL , "L_IMPL_REL" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "CONFLICTS" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "CONFIRMED" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "BACKUP" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "FROM_REL" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "TO_REL" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "OS" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "DB" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "PATCH_TYPE" SAPDB6VARCHAR(3) DEFAULT ' ' NOT NULL , "ANCESTOR" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "STRICT_SEQ" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "NO_GEN" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "SPAMFIX" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "ADDON_ID" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "ADDON_REL" SAPDB6VARCHAR(12) DEFAULT ' ' NOT NULL , "IGN_CONFLI" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "AP_ANCEST" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "EPSFILSIZ" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "HI_ANCEST" SAPDB6VARCHAR(2) DEFAULT ' ' NOT NULL , "COMP_REL" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "COMPONENT" SAPDB6VARCHAR(30) DEFAULT ' ' NOT NULL ) IN IDE#DDICD INDEX IN IDE#DDICI LONG IN IDE#DDICD)
DbSlExecute: rc = 102
(SQL error -601)
error message returned by DbSl:
SQL0601N The name of the object to be created is identical to the existing name "SAPIDE./SDF/PAT03" of type "TABLE". SQLSTATE=42710
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: END OF LOG: 20070503221753
=============================================
any help will be much appreciated.
thanks.
Message was edited by:
Abdul Wahid KhanHi,
Restart the installation from the begining
Regards
Umesh K -
Access denied. Error in File C:\WINDOWS\TEMP\
I have searched on Google and all over this forum and none of the solutions have fixed my problem.
Crystal Version: Crsytal.Net for Visual Studio.Net 2005
Server: Windows Server 2003
Error:
Access denied. Error in File C:\WINDOWS\TEMP\JuryDutyReport {D6296178-3E72-483E-B876-2DFC03D00841}.rpt: Access to report file denied. Another program may be using it.
When I run my app locally through the Web Server that comes with ASP.Net, everything is fine, it is only when I deploy the application to the Windows 2003 Server that I get the error.
I'm using impersonation in my ASP.Net application. I have given that domain user full access to 'C:\Windows\Temp'', the export folder and even the folder where the Crystal Report resides on the Server. When I run the application on the Web Server, I actually see the ".rpt" get created in the "C:\Windows\Temp" folder but yet it still says there is a permissions error.
What is bizarre is that the code below that just sends the file to the printer automatically works:
private void PrintJuryDutyReport(DataSet ds)
//create report document
ReportDocument crDoc = new ReportDocument();
//load, set datasource and print options
crDoc.Load(Server.MapPath("~/Reports/JuryDutyReport.rpt"));
crDoc.SetDataSource(ds); //set datasource
crDoc.PrintOptions.PrinterName = ddlPrinters.SelectedValue.ToString(); //set printername
crDoc.PrintOptions.PaperOrientation = PaperOrientation.Portrait; //set paper orientation
crDoc.SetParameterValue("ParamUsername", User.Identity.Name); //set parameter
crDoc.PrintToPrinter(1, false, 0, 0); //send to printer
I have to change the code to export to a PDF and this code doesn't work:
private void PrintJuryDutyReport(DataSet ds)
//report document
ReportDocument crDoc = new ReportDocument();
string myfile = @"G:\COPFS\COPFSPROD\ReportsTemp\MyPDF.pdf";
//load, set datasource and print options
crDoc.Load(Server.MapPath("~/Reports/JuryDutyReport.rpt"));
crDoc.SetDataSource(ds); //set datasource
crDoc.SetParameterValue("ParamUsername", User.Identity.Name); //set parameter
//export through http
crDoc.ExportToDisk(ExportFormatType.PortableDocFormat, myfile);
crDoc.Close();
crDoc.Dispose();
Response.ClearContent();
Response.ClearHeaders();
Response.ContentType = "Application/pdf";
Response.AppendHeader("content-disposition", "attachment; filename=" + myfile);
Response.WriteFile(myfile);
Response.Flush();
Response.Close();
Any help is greatly appreciated as I have to present this to end users tomorrow.Don, thanks for the response.
As a last ditch effort, I granted "modify" to the Network Service Account on C:\Windows\Temp and that fixed the error.
There are two things that are troubling about this:
1) I'm impersonating a domain user in my ASP.Net application and when the PDF is created, the owner is that domain user, so I know impersonation is working. So I wonder if ASP.Net picks and chooses what account it runs under at different times?
2) It is a little scary for the Network Service Account to have this access but that people seem to be fine with it.
http://aspadvice.com/blogs/rjdudley/archive/2005/03/14/2566.aspx -
error message on print window for Vista--"out of paper"--I just loaded paper...?
What can I do to get it to print?hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model can help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.
Maybe you are looking for
-
Sendmail broken from Solaris 10 11/06 to Solaris 10 8/07 - port 25 broken
I am in the process of building a new solaris 10 8/07 server to replace a solaris 10 11/06 server. Both are running. Sendmail on both has changes limited to: correcting /etc/hosts to include mailhost entry dns server pointing to localhost as mailhost
-
When opening the program LR 5 encounters an error when reading from it's preview cache.
When opening the program LR 5 encounters an error when reading from it's preview cache. It says it will correct the problem when it re opens. Why does this happen and how do I correct it?
-
In my System Preferences -> Users & Groups, I have Name and password selected, but when I get to the Login window, it's showing the List of users, including Guest User, which is disabled. Moreover, I have several other users accounts on this computer
-
Hi All, I have implemented both the addon(DMIS and DMIS_CNT) on all the four systems and also generated the profiles for role SAP_TDMS* , SAP_DMIS* , SAP_CMIS* , SAP_SLOP*. Can you please guide me or give me the step by step procedure to create a te
-
FCE HD 3.5: iMovie project cannot be imported...
... I am unable to import iMovie projects (DV-PAL) to FCE HD 3.5. "... 1 folder unidentified/unknown" appears and that's it ! This seems to be a common problem, since the iLife-guide from Galileo-Press describes the same problem, but offers no soluti