ERROR in EEO Suite of Reports
Hi All,
I am done with EEO setup. I have single business group and 6 locations where employee are attached. I want to generate individual reports for each location. I have created different hierarchy to which different location are attached. But when I am running report i am facing following error:
1) EEO Consolidated Report: It is not showing complete data and how many EEO-1 reports are submitted . it is just showing that that head count.
2) EEO Establishment Employment Listing : ESTABLISHMENT LISTING - TYPE 5 :
it is not showing any employee data as employee count is more than 49 and it is showing maximum employees 49.
3) EEO-1 Exception Report (EEO-1 Exception Report):
It is showing status Completed with warning ... and when i checked the log i got following massage:
[7/27/10 3:16:05 AM] [27153:RT483659] Starting XML Publisher post-processing action.
[7/27/10 3:16:05 AM] [27153:RT483659]
Template code: PERRPEOC
Template app: PER
Language: US
Territory: US
Output type: PDF
[7/27/10 3:16:05 AM] [UNEXPECTED] [27153:RT483658] oracle.apps.xdo.XDOException: Invalid input combination.
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:995)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:285)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:173)
[7/27/10 3:16:05 AM] [27153:RT483658] Completed post-processing actions for request 483658
Kindly Help me to sort out this issue. Thank u in advance.
Hi Basaw;
What is your EBS?
I could find just 2 notes in metalink which has similar error like yours,please check them if its not help i suggest log a SR while you are waiting other forum users response here
JGSLAJNLLG Global Ledger Journal Report runs in warning and produces no output [ID 1151273.1]
Bug 9047550: AR TO GL RECONCILIATION REPORT COMPLETES WITH WARNINGS
https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=9047550&productFamily=Oracle
Regard
Helios
Similar Messages
-
Hi
Can anyone tell me the reasons for below errors in EEO report.
Invalid Race or ethnicity:This error is showing for the ethincity Two or More Races.
No record in Table T5U0P:I checked the table for some PA EEO company ID is maintained for some PA not.
No Reporting Unit found in T5URU for PA:
Record could not be found T5UEEO 2010 01
Please anyone can suggest me on above issues.
Reagrds
VijayHi Vijay,
Your table entries are incorrect, that is causing the problem, but the data entries in IT0077 may be aligned to the incorrect entries in T505R. Thus, if you change the table entries to match the ones I have given all, your Hispanics may be classified as American indians on the EEO-1 report! With 10 days left until the report has to be submitted, not sure how you can do the table correction and data clean-up in that short time.
The E1 and E2 entries separate out those who are Hispanic and those not. Only those not Hispanic should have an entry in R1-6. Thus, your R1 is not needed. Also, your other entries do not match the mapping for the ethnic groupings that SAP program supplies for the EEO-1 report. You may have modify the program so your groupings fill the correct columns in the EEO-1 report. While it is not best practice to change the standard report, copying it to a custom version may be your only option at this point of time. Then you can work to correct the table and IT0077 entries to reflect the standard SAP solution.
The other errors on the report indicate that certain Personnel Areas did not have entries in the prior year EEO-1 report. That is possible if you have new Personnel Areas or they have changed the unit identification number with the EEOC. When you do make your final EEO-1 report run, you should check the box to "Write results in EEO record". This will make the entries in T5UEEO for this year that will be used for next year's "Prior year results". If you did not do this last year, you can rerun the report for the dates last year and check the box.
Paul -
Urgent.....Error while running a jsp report from Jdeveloper
Hi,
I am getting following error while running a jsp report from Jdeveloper. I am using version 10.1.2.1.0. The same report is working fine when I am running it from report builder. ( Both these tools were installed using Oracle Developer Suite 10g version 10.1.2). I did search in oracle discussion forums and google, but I could not arrive at a resolution of error. Any help in resolving this issue would be grateful.
Error details:
Page url : http://<hostipaddress>:8988/Reports-reportproject-context-root/MyReport.jsp
Reports Error Page
Wed Oct 17 20:03:22 IST 2007
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server myreportserver failed
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server myreportserver failed
at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:464)
at MyReport.jspService(MyReport.jsp:4)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:57)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
Could anyone help me out in resolving this issue.
Thanks
Siva...Hi,
I posted this message in jdeveloper forum yesterday, but there was no response. So I thought of posting it in this forum to check my luck.
Thanks
Siva... -
Urgent...Error while running a jsp report in Jdeveloper
Hi,
I am getting following error while running a jsp report from Jdeveloper. I am using version 10.1.2.1.0. The same report is working fine when I am running it from report builder. ( Both these tools were installed using Oracle Developer Suite 10g version 10.1.2). I did search in oracle discussion forums and google, but I could not arrive at a resolution of error. Any help in resolving this issue would be grateful.
Error details:
Page url : http://<hostipaddress>:8988/Reports-reportproject-context-root/MyReport.jsp
Reports Error Page
Wed Oct 17 20:03:22 IST 2007
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server myreportserver failed
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server myreportserver failed
at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:464)
at MyReport.jspService(MyReport.jsp:4)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:57)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
Could anyone help me out in resolving this issue.
Thanks
Siva...Hi,
I posted this message in jdeveloper forum yesterday, but there was no response. So I thought of posting it in this forum to check my luck.
Thanks
Siva... -
On the General tab for device status it says: "This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)" The only option available when I click
on properties of both devices is Start. When I click on Start for Antilog32, this message shows: "The system encountered the following error when it attempted to start the service: The system cannot find the file specified." For AODDriver4.1, the
message when you click Start on Driver tab is: "The system encountered the following error when it attempted to start the service: The system cannot find the path specified." I do not know how to proceed or
how to fix this, or where to find a solution. Please help!Hello pds48478480,
Do you mean you got the error code 24 in Norton Security Suite Diagnostic Report?
Please share us a screenshot for better analyzation.
Please take a look at the following thread about the AODDriver4.3.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/the-aoddriver43-service-failed-to-start-due-to-the/cb6b7f03-922b-4b82-972f-e92ef9919964
AODDriver 4.3 is used by AMD OverDrive which tune parameters to help system stability, optimize performance, and control cooling/acoustic characteristics.
With the issue description it seems the driver and the service is either stopped or not working correctly.
Refer to the link below and install the latest version of AMD OverDrive.
http://www.amd.com/en-us/markets/game/downloads/overdrive
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
Product: AE CS4
Version: 9.0
OS: OS X 10.5.7
One day this error just sprung up on me, after having worked fine for quite a while. Strangely, I have scoured the internet and found no mention of this specific error. The error happens upon launching After Effects and after clicking OK, the application shuts down. It does not ever reach the user interface. The loading splash screen comes up and then the errors come up shortly after.
The two error messages come up one after the other and read in this order:
"After Effects error: Tracker_Register: missing suite. ( 1 :: 0 )"
"After Effects can't continue: Failed to register built-in motion tracker."
I have attempted to reinstall After Effects entirely, even going as far as to wipe all the associated files that are left behind after an uninstall.
I will attempt to update AE and will report back the progress on that.
UPDATE
Updated AE to 9.0.2
There are now three errors, including the above two. The third error reads: "After Effects can't continue: unexpected failure during application startup"Okay, let's do this one step at a time. Removing components without proper uninstall procedures can indeed be dangerous, but I don't think that's the issue here. If the program reports an entire suite missing (which is merely another way of saying that some pieces of its core code have gone anywhere but here), one of the system libraries is not initializing. This is extremely rare on Macs, so this is even more puzzling. As a first step, I would definitely run a tool like OnyX or Apple's own Repair Permissions and disk health utility to check disk integrity. The thing is, the exact spot on the drive could be damaged and it's in the nature of OSX to not waste space, so it will always try to place files in the same physical spot, if they have the same name and similar properties to the predecessor and that region may actualyl have problems. Therefore updating AE might not solve the matter. Second, check the language settings on the files in your AE directory using right-click - Information. This also works with multiple files selected. If they have different settings, you will get a warning and may need to select them separately. On the info panel, have a look at the language options. If the language in which you run AE is not enabled or you have multiple instances of the same language checked (OSX again stores this per file redundantly), disable/ enable the check marks until everything seems right. While you are on the panel, also have a look at the compatibility infdo (it should refer to intel compatibility) and of course the user permission settings. All users must be at least able to read the files. From inside AE, check, whether you are using the "accelerate panels" option in the prefs. Since tracking is a layer window feature, it may cause issues, if there is something not right with your graphics card settings. Speaking of which, check your monitor settings if everything is right. As a last thing, definitely check your Quicktime install. I'm not aware of any definite problems, but QT is always a good candidate for causing issues of any kind.
Mylenium -
Error in executing ee0-1 report
Hi all
When I execute EEO-1 report, I encountered following error.
"Maintain valid EEO code for pernr XXX ".
Where to maintain EEO code in IMG.
Thanks in advance.Hello Vivek,
Please review SAP Note No. 976273 - "Modified EEO-1 reporting requirements as of 2007." and make sure all the configuration has been done.
From the note:
In addition to the application and output changes described above, this
Note also introduces various Customizing changes to the standard system.
Specifically, the HR Support Package(s) indicated here serve to revise,
as shown below, the U.S. Compliance Reports section of Customizing for
Personnel Administration (PA-PA), at Organizational Data ->
Organizational Assignment -> Organizational Plan
-> U.S. Compliance Reports
-> Review EEO ethnic origin categories
-> Review EEO/AAP occupational categories
-> Assign EEO/AAP occupational categories to jobs
-> Maintain EEO Record for compliance as of 2007
Page 4
-> Maintain EEO/VETS-100 reporting units and addresses
-> Maintain EEO/VETS-100 reporting unit numbers
-> Modify and generate features for U.S. compliance reports
-> Review SIC codes for EEO-1/VETS-100
-> Maintain SIC codes and EIN/D&B numbers for EEO-1/VETS-100
-> BAdI: OSHA Reporting
Regards,
Manny -
Error while running a customize report in oracle ebs
Hi ..
can anybody suggest how to solve the follwing error while running a customize report in oracle ebs?
XXIFMS: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Current system time is 03-JUN-2011 11:09:24
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DATE_FROM='2010/04/01 00:00:00'
P_DATE_TO='2011/06/03 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
stat_low = 9
stat_high = 0
emsg:was terminated by signal 9
ld.so.1: rwrun: fatal: librw.so: open failed: No such file or directory
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 9
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1068011.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1068011 on node D0005 at 03-JUN-2011 11:09:24.
Post-processing of request 1068011 failed at 03-JUN-2011 11:09:24 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JUN-2011 11:09:24Please post the details of the application release, database version and OS.
Is the issue with this specific concurrent program?
Can you find any errors in the CM/OPP log files?
Please see if these docs help.
On R12.1.1/Solaris Platform While Generating Oracle Reports Files Failed With Error " ld.so.1: rwconverter: fatal: librw.so: open failed: No such file or directory [ID 1067786.1]
Apps UPG Fail With Error Ld.So.1: Rwserver: Fatal: Librw.So [ID 961222.1]
Thanks,
Hussein -
LO 02010 / LO 26631 error while embedding a crystal report in a Dashboard
Hi Experts,
I am trying to embed a crystal report in a Dashboard Design using LiveOffice 4, and i am getting the below error.
"An error occurred while opening the report. The report does not exist; you have insufficient rights to open the report; or you cannot make a connection to the BusinessObjects Web Service. (LO 02010)" and "Crystal Reports Java Format is not supported. (LO 26631)"
I am logging in as an administrator and the report does exist in the CMC.
Pls. Help
Thanks
AsiriHi Amit,
Thanks for replying.
We did a upgrade from BOBJ 3.1 to 4.0 recently, and need to migrate the existing dashboards. DB connections to the reports have changed, hence the need to embed the migrated reports to the dashboard.
Yes, I get this error when i try to embed a crystal report in dashboard. I do get the same error when trying to embed a WEBi report too. As you suggested, i tried inserting a sample crystal report, and that inserts like a charm.
Pls. advice.
thanks
Asiri -
Error while running custom BI report in R12.1.1
Hi All,
We are encountering below error while running custom BI report in R12.1.1...
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
MSG-00001: started report
REP-1401: '': Fatal PL/SQL error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Fri Jun 24 16:47:30 2011
Please let us know how to fix this error.
Thanks
PraveenHi Praveen,
Seems the issue is with the rdf. Check whether all the parameters are passed correctly.
REP-1401: '': Fatal PL/SQL error occurred. -
Error while running the financial report in the workspace.
Hi,
Im getting the below error while running the financial report in the workspace in HTML mode.
*"Required application module reporting.HRRunDlg is not configured. Please contact your administrator".*
And im not able to login to the Hyperion Financial Reporting as well.. i get the below error
*"You are not authorized to use this functionality. Contact your administrator"*
Can someone let me know how to resolve this error.You don't mention the version, what app server or web server you are using, etc.. That information might be helpful, but in general, you can try the following:
1. Make sure you have gone through the FR Web App deployment steps and verify the settings entered in the Config Tool.
2. For version 11.1.1.x and 9.3.1.x, try opening the report in FR Studio and running it via the FR Studio Print Preview (*bold*not*bold* Web Preview.) If the report runs/processes, then the back-end FR Services are functioning and the issue is confined to the web interface. Verify the FR Web App is up and listening on the designated port (8200, by default), check the FR Web App logs and the App Server (WebLogic, WebSphere, Tomcat, OAS) logs for errors/issues.
If the report fails to process in FR Studio Print Preview, then there is a problem with the FR Reporting Server Service. Check to make sure the service is up/functioning and check the FR Report Server logs for errors.
3. Test access to other FR functionality in workspace (ex: Files->Preferences->Financial Reporting or Explore->Tools->Database Connection Manager?) If these don't work, then try to connect to the following URLs:
http://workspaceServer:19000/hr/status.jsp
http://frWebAppServer:8200/hr/status.jsp
Note: The URLs above assume standard/default ports. You may need to adjust them for your environment.
If the first URL fails, but the second URL works, there is a problem with the HTTP redirect settings on the Web Server (Apache, IIS, etc.) Run through the Workspace deployment and make sure the Web Server Config settings point to the right ports/servers. -
Error in Calling oracle 10g reports
Hi to all,
Could somebody please help me how to solved my problem. im running my forms and reports locally and its working fine. now, im trying to call one of my reports to my form using this code:
DECLARE
RO_Report_ID REPORT_OBJECT;
Str_Report_Server_Job VARCHAR2(100);
Str_Job_ID VARCHAR2(100);
Str_URL VARCHAR2(100);
PL_ID PARAMLIST ;
server_name VARCHAR2(200) := 'your-d7626327dd';
BEGIN
PL_ID := GET_PARAMETER_LIST('TEMPDATA');
IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
END IF;
PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
RO_Report_ID := FIND_REPORT_OBJECT('REPORT_OBJ');
ADD_PARAMETER(PL_ID, 'S_SIN_NO', TEXT_PARAMETER,:SCRAP_DELIVERY_REQUEST.SIN_NO );
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_FILENAME, 'C:\New Forms\REF_SF_510');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESFORMAT, 'PDF');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_SERVER,server_name);
Str_Report_Server_Job := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
Str_Job_ID := SUBSTR(Str_Report_Server_Job, LENGTH('server_name') + 2, LENGTH(Str_Report_Server_Job));
Str_URL := '/reports/rwservlet/getjobid' || Str_Job_ID || '?server=' || server_name;
WEB.SHOW_DOCUMENT(Str_URL, '_SELF');
DESTROY_PARAMETER_LIST(PL_ID);
END;
Please help me how to fix this.
When i tried pressed the button i received this error:
FRM-41219 : Cannot find report: Invalid ID ( first error, i think its came up 4 times)
FRM-40738 : Argument 1 to built in RUN_REPORT_OBJECT. Cannot be null.hi...i already done what u had suggested but the error still come up.
DECLARE
RO_Report_ID REPORT_OBJECT;
Str_Report_Server_Job VARCHAR2(100);
Str_Job_ID VARCHAR2(100);
Str_URL VARCHAR2(100);
PL_ID PARAMLIST ;
BEGIN
PL_ID := GET_PARAMETER_LIST('TEMPDATA');
IF NOT ID_NULL(PL_ID) THEN
PAUSE;
DESTROY_PARAMETER_LIST(PL_ID);
END IF;
PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
RO_Report_ID := FIND_REPORT_OBJECT('REPORT_OBJ');
ADD_PARAMETER(PL_ID, 's_sin_no', TEXT_PARAMETER,:scrap_delivery_request.sin_no);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_FILENAME, 'C:\New Forms\REF_SF_510.rdf');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESFORMAT, 'PDF');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_SERVER, 'rep_edmund.main');
Str_Report_Server_Job := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
Str_Job_ID := SUBSTR(Str_Report_Server_Job, LENGTH('rep_edmund.main') + 2, LENGTH(Str_Report_Server_Job));
Str_URL := '/reports/rwservlet/getjobid' || Str_Job_ID || '?server=' || 'rep_edmund.main';
WEB.SHOW_DOCUMENT(Str_URL, '_SELF');
DESTROY_PARAMETER_LIST(PL_ID);
END;
Edited by: baguhan on Jul 4, 2009 12:59 AM -
Hi,
I am working on SSRS 2008 R2.
My Colleague gave me one RDL. I have added it to my SSRS project on BIDS & Tried to Open by double-click on that RDL.
I got a popup error saying "Failed to open report 'reports_List.rdl'. clicked on
Details button & noticed error explanation as . "Invalid character in the given encoding. Line 1, position 1".
When i try to View Code of this RDL, I got another error message saying "Exception from HRESULT: 0x80041FEB"
Can anybody suggest me ... what exactly the root cause of it? how can i resolve it ?
thanks a lot in advance !
best regards,
VenkatHi Venkat,
Did you use Visual Studio 2010 on your test? It is a known issue of Visual Studio 2010. Please refer to the following document. It has fix method provided by the Microsoft Web Development Tools team to work around the issue.
https://connect.microsoft.com/VisualStudio/feedback/details/552134/hresult-error-creating-timetracking-sample-web-site-project
Since the issue related to Visual Studio. I suggestion you post the question in the following forum:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=Vsexpressvb
It is appropriate and more experts will assist you.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.
I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.
-
I had power hits that cycled my computer a few times. I had to do a recovery from a week ago. Firefox will no longer start. A crash report pop-up shows an error and cannot send a report. I'm assuming the program will have to be reinstalled. Will I loose all previous bookmarks. Doing a windows search for bookmarks only shows about 1/3 of saved bookmarks. Are they gone too.
I gambled, and all bookmarks returned.
Maybe you are looking for
-
PSE 10 "help" - error message re Adobe Air
I am unable to access the PSE help within PSE 10. Each time I get an error message indicating that the problem relates to Adobe Air and that I should re-install it (Adobe Air). I have tried re-installing both Adobe Air and PSE10 but the problem per
-
I am unable to access my gmail account on my iPhone or my iPad three. I get an error message saying that either my user name or password is incorrect. I have deleted my account and restarted my iPad or iPhone but it still will not work. Can anybody h
-
How to import ITunes library from external drive
Using Mac, Leopard, Time Machine, my hard drive crashed Had a recent backup on Time Machine. New computer doesn't recognize last backup of TM on external hard drive, but I can find my ITunes Library there, with thousands of songs. when I go in ITunes
-
Install Epson Perfection 3200 Photo Scanner
My kernel is a custom built 2.6.3. I am trying to install an Epson Perfection 3200 Photo Scanner. It works under SuSE8.2 so there is no fundamental hardware problem. The sane website lists the 3200 as completely supported. The system recognizes the s
-
Max file size in OSX Tiger?
I regularly backup my hard drive to my USB 2.x 80GB drive with Retrospect. As of the moment my backup file is 20GB's. Is there a max file size limit like there was in the old Mac os? Thanks, John