Error in EHPI Tool in EHP4 upgrade process
Hello All,
I have ECC dual stack server at EHP3 and i am upgrading it to EHP4 via EHPI Tool.
In EHPI wizard "Configuration" step for ABAP is done properly but in J2EE it is stuck with an error "An error has occurred during the execution of the PREPARE_JSPM_QUEUE phase.
The stack XML D:\SID_Upgrade_Data\SMSDXML_SID_20091217105348.343.xml is not supported by this EHP installer."
I have seen the log file of EHPi it says.
"The stack XML D:\SID_Upgrade_Data\SMSDXML_SID_20091217105348.343.xml is not supported by this EHP installer."
At the time of creation of Stack configuration xml file i have selected all the SCA from solutiion manager, but i cant understand why J2EE is not accepting the xml that is properly identified by ABAP?
What can be the reson for this.
Pls help.
Thanks and regards.
Vinit
Hello All,
Now i am in "Downtime" phase of EHPI tool The ABAP Phase is Waiting and in MAIN_NEWBAS/GETSYNC_MODPROF_STARTED Phase.
The J2EE status is Running and it says Phase DEPLOY_ONLINE_DEPL is running ...
Although there is no log wriiting since last 15 Hrs. The last log that i came to know says.
ABAP Log(SAPehpiConsole.log).
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Starting of UPDATE CMOD in batch (job RSMODACU)
working ...
>> 2009/12/29 22:07:07 END OF PHASE MAIN_NEWBAS/JOB_RSMODACU
>> 2009/12/29 22:07:07 START OF PHASE MAIN_NEWBAS/DBCLEAN_UPG
>> 2009/12/29 22:07:13 END OF PHASE MAIN_NEWBAS/DBCLEAN_UPG
>> 2009/12/29 22:07:13 START OF PHASE MAIN_NEWBAS/EXEC_SMON
>> 2009/12/29 22:07:16 END OF PHASE MAIN_NEWBAS/EXEC_SMON
>> 2009/12/29 22:07:16 START OF PHASE MAIN_NEWBAS/STOPSAP_DUAL
Stopping system ...
>> 2009/12/29 22:07:29 END OF PHASE MAIN_NEWBAS/STOPSAP_DUAL
>> 2009/12/29 22:07:29 START OF PHASE MAIN_NEWBAS/GETSYNC_MODPROF_STARTED
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
JAVA LOG(Dailog Log)
Java Enhancement Package Installation
</font>
<p>When reporting problems to SAP Support, attach the trouble ticket file <b>D:\EHPI\java\log\TroubleTicket_03.txt</b> to your message.<br>
</html>.
Dec 29, 2009 4:22:23 PM [Info]: com.sap.sdt.ucp.dialog.Dialog.process(Dialog.java:264) [Thread[main,5,main]]: Dialog PhaseErrorMessage variable handler has been updated.
Dec 29, 2009 4:22:23 PM [Info]: com.sap.sdt.ucp.dialog.Dialog.process(Dialog.java:214) [Thread[main,5,main]]: Waiting for input in dialog ActionErrorDialog type Composite.
Dec 29, 2009 4:22:31 PM [Info]: com.sap.sdt.ucp.dialog.Dialog.process(Dialog.java:233) [Thread[main,5,main]]: Processing input in dialog ActionErrorDialog type Composite.
Dec 29, 2009 4:22:31 PM [Info]: com.sap.sdt.util.dialog.ExclusiveSelectionDialog.updateVariables(ExclusiveSelectionDialog.java:339) [Thread[main,5,main]]: In dialog ActionErrorOption the value of variable repeat labeled Repeat phase from point of failure has been set to value of variable true.
Dec 29, 2009 4:22:31 PM [Info]: com.sap.sdt.util.dialog.ExclusiveSelectionDialog.updateVariables(ExclusiveSelectionDialog.java:339) [Thread[main,5,main]]: In dialog ActionErrorOption the value of variable ignore labeled Ignore error and go to next phase (requires password) has been set to value of variable false.
Dec 29, 2009 4:22:31 PM [Info]: com.sap.sdt.util.dialog.ExclusiveSelectionDialog.updateVariables(ExclusiveSelectionDialog.java:339) [Thread[main,5,main]]: In dialog ActionErrorOption the value of variable jump labeled Jump to another phase (requires password) has been set to value of variable false.
Dec 29, 2009 4:22:31 PM [Info]: com.sap.sdt.util.dialog.ExclusiveSelectionDialog.updateVariables(ExclusiveSelectionDialog.java:339) [Thread[main,5,main]]: In dialog ActionErrorOption the value of variable exit labeled Exit program has been set to value of variable false.
Dec 29, 2009 4:22:31 PM [Info]: com.sap.sdt.util.dialog.NavigationButtonGroupDialog.updateVariables(NavigationButtonGroupDialog.java:342) [Thread[main,5,main]]: In dialog Buttons the value of variable BUTTON labeled #Continue has been set to value of variable Continue.
Dec 29, 2009 4:22:31 PM [Info]: com.sap.sdt.util.dialog.NavigationButtonGroupDialog.updateVariables(NavigationButtonGroupDialog.java:346) [Thread[main,5,main]]: Dialog Buttons has been confirmed.
Dec 29, 2009 4:22:31 PM [Info]: com.sap.sdt.util.dialog.CompositeDialog.isConfirmed(CompositeDialog.java:281) [Thread[main,5,main]]: Dialog ActionErrorDialog has been confirmed.
Dec 29, 2009 4:22:31 PM [Info]: com.sap.sdt.util.dialog.InfoDialog.updateHandler(InfoDialog.java:116) [Thread[main,5,main]]: Dialog type InfoText with dialog name Info displays dialog text <html>
An error has occurred during the execution of the <i>DEPLOY_ONLINE_DEPL</i> phase.<br>
<div style="background-color: #dde8ef"><font face="Helvetica, Arial">
Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action.
Could not execute deployment of stack file D:\HRC_Upgrade_Data\SMSDXML_HRC_20091222112753.484.xml.
The deployment of the queue failed.
Deployment of queue sapjup-queue completed with error Cannot stop J2EE instance, SCS instance or OS services.
Cannot stop OS services, SCS instance and J2EE instance.
Cannot stop instance HRC 10.
Could not stop instance 10.
JSPM version is 7.01.5.1.3. Current JSPM log directory is S:\usr\sap\HRC\DVEBMGS10\j2ee\JSPM\log\log_2009_12_29_14_57_26.
<br>
</font></div>
<p>You may now do one of the following:
<ul>
<li><i>Repeat phase from point of failure.</i> After you have corrected the error, you can repeat the phase from the exact point where the error occurred.
<li><i>Ignore error and go to next phase.</i> You must obtain a password from SAP Support to use this option.
<li><i>Jump to another phase.</i> You can choose the phase you want to jump to from a list of all phases that belong to the current module. You must obtain a password from SAP Support to use this option.
<li><i>Exit program.</i>
</ul>
</html>.
Dec 29, 2009 4:22:31 PM [Info]: com.sap.sdt.util.dialog.InfoDialog.updateHandler(InfoDialog.java:116) [Thread[main,5,main]]: Dialog type InfoText with dialog name Info displays dialog text What do you want to do?.
Dec 29, 2009 4:22:31 PM [Info]:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Thanks and Regards
Vinit
Similar Messages
-
8.1 Weblogic Integration Upgrade Processes Wizard
I am unable to access the Tools, Weblogic Integration, Upgrade Processes in the
8.1 IDE. The upgrade processes selection is grayed out. I have followed the
simple instructions but to no avail. Has anyone used the upgrade utility to port
2.1 workflows to 8.1? Are there any "tricks" to this?Rick wrote:
I am unable to access the Tools, Weblogic Integration, Upgrade Processes in the
8.1 IDE. The upgrade processes selection is grayed out. I have followed the
simple instructions but to no avail. Has anyone used the upgrade utility to port
2.1 workflows to 8.1? Are there any "tricks" to this?1) Download the upgrade tool from:
http://dev2dev.bea.com/resourcelibrary/utilitiestools/upgrade.jsp
2) Install according to the instructions at:
http://edocs.bea.com/wli/docs81/upgrade/install.html#1053762
tried upgrades of processes from 7 to 8.1, upgrade worked, but many of
the parameters went missing. -
Error while running EHPI Tool for upgrading EHP2 ON Netweaver as abap
Hello Guys,
Hope you guys are rocking...
we are in the process of upgrading the SAP Netweaver version from SAP NETWEAVER 7.0 to EHP2 Through EHPI Tool in the preparation phase we are facinga issue....
ERROR: The new SAP tools in /usr/sap/EHPI/abap/exe cannot connect to your database.
Possible reasons are:
- Environment variables are not properly set for the version of the
database client which is used by the new tools.
- Required database libraries are not accessible or cannot be found neither
through a compiled-in path nor through explicit search via the
shared library path.
- Auxiliary files such as language files etc. are not compatible with
this version of the database client.
Please check database / OS specific notes referenced in the manual for more help.
The log file /usr/sap/EHPI/abap/log/DBCONNCHK.LOG contains more
details about the failure.
done latest kernel upgrade in sys /exe/run and ehpi/abap/exe
and tested connection from EHPI/abap/exe r3trans -d success.
please do needful.
Regards,
SyedDear Syed,
Regarding the issue faced by you please make sure you download and replace the the latest patch of
tp, R3trans and Database Library (dbsl library) of target release(720) to the /usr/sap/EHPI/abap/exe and /exenew
directories and then restart the EHPI tool (repeat the phase).
Also check if the file dboraslib.sl was existing in the new patches and folders which are replaced.
Look into Note 830578 - Oracle database 10g: Unix environment variable
to check the environment variable are set properly or not.
This should resolve your issue.
Best Regards,
Abhishek -
Execution of Reports phase error during SAP EHP4 upgrade with EHPi
I started getting an error message in the "Execution of reports after put" phase
(within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
Package Installer.
***** LIST OF ERRORS
AND RETURN CODES *****
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
text: Cause Program "&V#&", which was started in the background, was
terminated abnormally. System Response The system created a job log for
the terminated program. What to do Proceed as follows: Log onto the
system in which the program was executed. The system is specified at the
beginning of the transport log. Then call transaction SM37 to display the
job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
starting date to the starting date specified in the transport log. For
the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
selection criteria is displayed. You can display the log by pressing
<LS>Job log</>. If the list contains several jobs, you can select the job
with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
further details for the selection criteria in the initial screen of
transaction SM37. If the ABAP processor reports cancellation,
double-clicking on the corresponding message in the job log branches to
the display of the corresponding short dump. 1AEPU320 See job
log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
application reports that run at the end of an upgrade.
Most XPRA reportshave a report documentation that explains what the report does and how
errors can be corrected. Call transaction se38 in the SAP system, enter
the report name, select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above
<<<
I tried to follow the instructions in note 1269960, but the enhancement spot
CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
but got the same error. Also, I couldn't implement the note using SNOTE because it is
the middle of the upgrade process.
I also found the following long text in ST22
"Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program
"CL_CLS_BADI_CHARACTERIZATION==CP".
The internal system error cannot be fixed by ABAP means only."
I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
So far, I could not find any information on this. Any help would be greatly appreciated!
Thanks,
VictorHi Victor,
Go to SM37 and put in the username as DDIC and see the job log.
Also check Sm50 and see whether you have BTC processes available.
Last but not the least check your filesystem space usage too.
Gerard -
Error while doing EHP4 upgrade
Hello Colleagues,
While doing EHP4 upgrade on windows 2008 server in extraction phase, i am getting following error message:
Unable to execute the SDT request ABAP operation extract on hostname inmumeucpi instance 00 Extraction of the ABAP upgrade request ABAP has failed Error from unit observer Tool connector failed with . Start of SAPup failed: OS process 'G:\EHPI\abap\bin\SAPehpi.exe' start failed. java.io.IOException: Cannot run program "G:\EHPI\abap\bin\SAPehpi.exe" (in directory "G:\EHPI\abap\bin"): CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail java.io.IOException: Cannot run program "G:\EHPI\abap\bin\SAPehpi.exe" (in directory "G:\EHPI\abap\bin"): CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail java.io.IOException: CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail . OS process 'G:\EHPI\abap\bin\SAPehpi.exe' start failed. java.io.IOException: Cannot run program "G:\EHPI\abap\bin\SAPehpi.exe" (in directory "G:\EHPI\abap\bin"): CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail java.io.IOException: Cannot run program "G:\EHPI\abap\bin\SAPehpi.exe" (in directory "G:\EHPI\abap\bin"): CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail java.io.IOException: CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail
Please look into it ASAP.
Regards,
Nitin> The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail
This is caused by a missing security patch:
Note 1402510 - Resolving SideBySide Assembly Errors
which finally points to
Note 1375494 - SAP system does not start after applying SAP kernel patch
Install the security patch from that note.
Markus -
Hi experts,
When i am doing EHP4 upgrade to ecc 6.0, EHPI screen closed suddently at configuration phase. if i trying launch the EHPI screen
it is showing below error
Jul 26, 2011 8:43:27 AM [Warning]: Tool asked for unknown feature "evaluation"!
Jul 26, 2011 8:43:27 AM [Info ]: Feature "evaluation": Tool setting "unknown", server setting "unknown".
Jul 26, 2011 8:43:27 AM [Info ]: >> sapparam: sapargv(argc, argv) has not been called!
Jul 26, 2011 8:43:27 AM [Info ]: Tool reported normal exit.
Jul 26, 2011 8:43:27 AM [Info ]: SAPup terminated with exit code 20.
Jul 26, 2011 8:43:27 AM [Info ]: Commlink closed. Waiting for process to terminate before reporting normal exit.
Jul 26, 2011 8:43:27 AM [Info ]: Reporting tool exit with rc=20
Jul 26, 2011 8:43:27 AM [Info ]: Tool closed connection.
Jul 26, 2011 8:43:27 AM [Info ]: Tool exited normally.
Jul 26, 2011 8:43:27 AM [Info ]: >> sapparam(1c): No Profile used.
Jul 26, 2011 8:43:27 AM [Info ]: >> sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
Jul 26, 2011 8:43:27 AM [Info ]: >>
Jul 26, 2011 8:43:27 AM [Info ]: >> FATAL ERROR: Root directory '/usr/sap/ERR/EHPI700/EHPI/abap' and profile parameter DIR_PUT = '/usr/sap/ERR/put' do not match
Jul 26, 2011 8:43:28 AM [Info ]: >> Closed error stream
Please suggest me on this issue
Regards
srinivasHi,
> Jul 26, 2011 8:43:27 AM [Info ]: >>
> Jul 26, 2011 8:43:27 AM [Info ]: >> FATAL ERROR: Root directory '/usr/sap/ERR/EHPI700/EHPI/abap' and profile parameter DIR_PUT = '/usr/sap/ERR/put' do not match
> Jul 26, 2011 8:43:28 AM [Info ]: >> Closed error stream
>
Either change the location of the upgrade directory as per value of parameter DIR_PUT or change this parameter to your upgrade directory location. And then try.
Thanks
Sunny -
EHP4 upgrade: Error in Phase ACT_UPG
Hi All,
While upgrading to EHP4 on ECC 6 system, we got error in phase MAIN_SHDRUN/ACT_UPG
Checks after phase MAIN_SHDRUN/ACT_UPG were negative!
Last error code set: Unresolved requests in buffer RH4 Check logfiles 'ACTUPG.ELG' and '/sapdump/SAPehpi/EHPI/abap/log/SAPehpi.ECO'
ACT_UPG log:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DMINISPSCA.RH4
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "12"
Log of SAPA-604DMINISPSCA.RH4
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP101 transport order : "SAPK-604DMINISPSCA"
1 ETP102 system : "RH4"
1 ETP108 tp path : "/sapdump/SAPehpi/EHPI/abap/exe/tp"
1 ETP109 version and release : "372.04.70" "700"
1 ETP198
3 EPU324 See log for request "/sapdump/SAPehpi/EHPI/abap/tmp/SAPAB70015.RH4" (timestamp "01:26:08", system "RH4")
1AETR012XProgram terminated (job: "RDDMASGL", no.: "01260600")
1AEPU320 See job log"RDDMASGL""01260600""RH4"
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP110 end date and time : "20091012033215"
1 ETP111 exit code : "12"
1 ETP111 exit code : "12"
Job RDDMASG log :
Job cancelled with following log
2.10.2009 01:26:07 Job started 00 516 S
2.10.2009 01:26:07 Step 001 started (program RDDMASGL, variant IMPACTMRG, user ID DDIC) 00 550 S
2.10.2009 01:26:08 Start of mass activation 01:26:08 AD 010 S
when tried to log into shadow instance after getting error, it is giving error
RH4: system message
work process restarted; session terminated;
we restarted shadow system. There is no dumps in the shadow system.
Work process getting killed after 7800s
checked in work directory of Shadow system: devdisp log :_*
Mon Oct 12 04:49:46 2009
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1694]
***LOG Q0K=> DpMsAttach, mscon ( HW136799) [dpxxdisp.c 12639]
DpStartStopMsg: send start message (myname is >HW136799_RH4_22 <)
DpStartStopMsg: start msg sent
Warning: Swap space is configured quite small with 20477 MB.
It should be configured with at least 20 GB on 64 bit systems.
See note 153641 for more information.
Warning: tmpfs at /dev/shm is configured quite small with 1972 MB!
Minimum value is 8192 MB.
Recommended size is 75 % of RAM + swap.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Mon Oct 12 04:49:47 2009
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 221
Release check o.K.
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Oct 12 06:57:01 2009
ERROR => DpWPCheck: W8 (pid 9769) died (severity=0, status=7) [dpxxdisp.c 15776]
child (pid=9769) killed with signal 7
Mon Oct 12 06:57:43 2009
ERROR => DpWPCheck: W7 (pid 9768) died (severity=0, status=7) [dpxxdisp.c 15776]
child (pid=9768) killed with signal 7
Please let us know what needs to be cheked for the problem
Thanks,
Ramesh RamagowniHi Markas and All,
Thanks for the information. /dev/shm was 100% full. now, the issue is solved after deleting its contents. and we have finished with EHP4 upgrade.
After upgrade, SAP_AP component still showing as 700
SAP_AP - 700 - 0015 - SAPKNA7015 -SAP Application Platform
Can we delete old tablespace PSAPSR3700, it is showing as 0% used in brspace at present.
Also while trying to move some datafiles using brtools after upgrade we are getting following error,
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.52
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0252E Function fopen() failed for '/oracle/RH4/sapbackup/.user.pas' at location BrToolCall-2
BR0253E errno 13: Permission denied
BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
There is no file in the directory '/oracle/RH4/sapbackup/.user.pas'
Please suggest what needs to be for this issue..Do we need to upgrade BRTOOLS..
Thanks,
Ramesh R -
Error while doing EHP4 upgrade in downtime phase
HI .
Iam facing the below error while doing the EHP4 upgrade , in downtime phase.
Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!
Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 >
Connect to SAP gateway failed Connect_PM GWHOST=Hydhtc4526D, GWSERV=sapgw04, SYSNR=04 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.136.162.30:3304' not reached TIME Mon Jun 06 18:17:46 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40 RC -10 MODULE nixxi.cpp LINE 3286 DETAIL NiPConnect2: 10.136.162.30:3304 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER System start failed
Please help me in resolving this error.
Sanketh.Hi,
Upgrade tool is trying to start the system but system is not coming up. Try to start system manually and see if system comes up or not. If not then check logs in work directory for why system is not coming up.
Thanks
Sunny -
After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition. -
EHP4 upgrade Error - phase MAIN_SHDINST/RUN_RSVWSCPY were negative
Hello
Currently I am doing EHP4 upgrade on Oracle 10g with Sun Solaris 5.10 , During preprocessing phase ( The EhP Installation program builds the shadow system from the original one.)
I am getting following error
Checks after phase MAIN_SHDINST/RUN_RSVWSCPY were negative!
Last error code set: BATCH JOB RSUPG_COPY_SHD_VIEWS FAILED: Error(s) found in the log(s), accumulated in "RSVWSCPY.ELG".
Log file for RSVWSCPY.ELG as below
cat RSVWSCPY.ELG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Clone shadow views ERRORS and RETURN CODE in RSVWSCPY.<SID>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EETGCLN ORA-12154: TNS:could not resolve the connect identifier specified
1EETGCLN Unable to open connection to shadow system.
1EETGCLN Use function module CREATE_SHDDBCON to adjust the settings for connection UPGSHD.
cat sqlnet.ora
===========
AUTOMATIC_IPC = ON
TRACE_LEVEL_CLIENT = OFF
NAMES.DEFAULT_DOMAIN = WORLD
05.01.06 unsorported parameter now
#NAME.DEFAULT_ZONE = WORLD
05.01.06 set the default to 10
SQLNET.EXPIRE_TIME = 10
05.01.06 set to default
#TCP.NODELAY=YES
05.01.06 set to 32768
DEFAULT_SDU_SIZE=32768
cat tnsnames.ora
=============
<SID>.WORLD=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = <hostname>)
(PORT = 1527)
(CONNECT_DATA =
(SID = <SID>)
(GLOBAL_NAME = <SID>.WORLD)
===
Could you please help me to fix the issue.
Thanks , BMHello Orkur,
Like bharath reddy and others, I´m facing with the same error, but in my case the platform is OS/400 (V7R1M0) database DB4!
I´m doing an EHP5 upgrade and it stopped in phase MAIN_SHDINST/RUN_RSVWSCPY, the following error is show me:
Checks after phase MAIN_SHDINST/RUN_RSVWSCPY were negative!
Last error code set: BATCH JOB RSUPG_COPY_SHD_VIEWS FAILED: Error(s)
found in the log(s), accumulated in "RSVWSCPY.ELG".
In that RSVWSCPY.ELG file it have the following details:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Clone shadow views ERRORS and RETURN CODE in RSVWSCPY.PRD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EETGCLN
1EETGCLN Unable to open connection to shadow system.
1EETGCLN Use function module CREATE_SHDDBCON to adjust the settings for connection UPGSHD.
I performed what you mentioned, I execute "Create_SHDDBCON" function module on SE37... but I didn´t continue this execution because I´m not sure what I have to fill in that parameters: DBUSER ; DBPASS and CONENV. You recommended some values to that fields/parameters... but where you have been seeking this values/information? How you know that?
Can you help me/us?
Thank you
JC project -
EhP4-Upgrade: error in phase PREP_INPUT/KX_CPYORG
Hi!
I try to execute a EHP4 upgrade for SAP ECC system with EhP Installer.
The programm stopps after several repeat attempts in the the phase PREP_INPUT/KX_CPYORG.
The error I get is:
CURRENTPHASE PREP_INPUT/KX_CPYORG
...started at 20090320163915
Using phase log file 'KX_CPYORG.LOG'.
Kernel is replicated from D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64.
Error message set: 'File 'D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64\##f' does not exist: The system cannot find the file specified.
...begin dialogue at 20090320164430
How can I solve this problem?
Thank you very much!
regards
Ju00FCrgenHi
Don't know if it is still relevant (or even the same issue) but I had a similar problem with a file ##f not found directly after a mention of "reading dbclient.lst" in the log, and I fixed it by opening dbclient.lst in notepad and saving it again as ANSI. The original was Unicode and I noticed some other .lst file was ANSI. Hope this helps.
Best regards
Mischa -
We are doing Upgrade Process in BW 3.5 server to 7.0 Server.
in that Upgrade Process, we got this error Invalid object name 'SVERS'.
Please find the solution for this error and reply to me..
thanks in advace.
regards,
mohankumar.gI had the same problem when I was doing upgrade R/3 to ECC 6.0.
Check out SAP notes, there is updated SAPup.exe, and if you changed DDIC password, change it with only numbers. then it worked. -
I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?
Well I spoke too soon.
The update was successful, but now I cannot connect to the 3GS data network.
Cannot get email and cannot open a page in Safari.
+"Safari could not open the page because the server stopped responding."+
+"Cannot Get Mail+
+THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
Email and internet work fine on WiFi.........no data using 3GS network.
Looks like I will have to revert back to old OS. -
EhP4-Upgrade: Errors in DDIC_ACTIVATION
Hi!
I am hanging in DDIC:ACTIVATION phase of EHP4-Upgrade due to following errors:
Table RNWP_ARRIVAL_LIST cannot be activated
Table RNWP_DEPARTURE_LIST cannot be activated
Table RNWP_OCCUPANCY_LIST cannot be activated
When I go to SE11 and execute the check I get:
Field DWS_OPEN_TASK_ICON in Tabelle RNWP_ARRIVAL_LIST comes double (please check)
Field DWS_OPEN_WORK_ICON in Tabelle RNWP_ARRIVAL_LIST comes double (please check)
Fiels DWS_PROFESSIONS in Tabelle RNWP_ARRIVAL_LIST comes double (please check)
The other error is:
View V_FBN_T74HB cannot be activated
(W- Field SPRAS is a language field. Check usage in key )
(W- Search help J_7LE01_F4 not inherited: Basis field J_7LE01-LAND1 missing in view )
(W- Field name DECIMAL is reserved (Do not use structure as include in DB table) )
Question:
How can I solve these errors?
Thank you!Hi Richa,
DDIC Activation errors should be fixed in Shadow system and not in the original system.
As Sunny said you can ignore the above errors but if i were you i would ask my Development team to look into this issue.
To fix this issue in shadow system you have to unlock the shadow system by using the below command
Go to the bin directory (/usr/sap/SID/upg/abab/bin) and issue the command ./SAPup unlockshd SID and login to client 000
of the shadow system and open the client and from SE06 set the system as Modifiable.After fixing the above error lock the
client and the shadow system ./SAPup lockshd SID and rerun ACT_UPG phase and check the log file to see if the above error
is fixed.
Regards,
Ershad Ahmed. -
EHP4 Upgrade ABAP+JAVA stack
Hi SDN Team,
We are in the proceess of EHP4 upgrade,now we are at the road map configuration where we got stuck,I is looking for JAVA sca files in XML file but could not found the same and it throw an error,
Trouble Ticket Log
===============
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: SE1
Hostname...........: NA00SAPSAND02
Install directory..: g:/usr/sap/SE1
Upgrade directory..: G:\EHPI\EHPI\java
Database...........: Microsoft SQL Server
Operating System...: NT
JDK version........: 1.6.0_07 SAP AG
SAPJup version.....: 3.4.29
Source release.....: 700
Target release.....: 700
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....:
ABAP stack present.: true
The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
More information can be found in the log file G:\EHPI\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
com.sap.sdt.ucp.phases.PhaseException
The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
PREPARE_JSPM_QUEUE
INIT
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
We have added the system in SMSY and download the stack properly and I could see SCA files listed in XML file but still iam stuck the above error
PREPARE_JSPM_QUEUE_CSZ_02
===========================
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[G:\EHPI\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG]/>
<!PATTERN[PREPARE_JSPM_QUEUE_CSZ_02.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter inputFile=EHPComponents.xml
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack queue preparator.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
Jul 27, 2010 3:48:22 AM [Warning]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) [Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP Learning Sol-Frontend CP - 05 (11/2009) found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This software feature will be skipped.
Jul 27, 2010 3:48:22 AM [Warning]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) [Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP NW - Applic. Server Java - 05 (11/2009) found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This software feature will be skipped.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml has finished.
Jul 27, 2010 3:48:22 AM [Error]: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Jul 27, 2010 3:48:22 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/07/27 03:48:22.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/07/27 03:48:22.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.141.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
Not sure what to do now.please advise.
Regards
UdayHi Uday,
> Jul 27, 2010 3:48:22 AM [Warning]: >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) >[Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP Learning Sol-Frontend CP - 05 (11/2009) >found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for >system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This >software feature will be skipped.
> Jul 27, 2010 3:48:22 AM [Warning]: >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) >[Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP NW - Applic. Server Java - 05 (11/2009) >found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for >system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This >software feature will be skipped.
> Jul 27, 2010 3:48:22 AM [Info]: >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of >stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml has finished.
> Jul 27, 2010 3:48:22 AM [Error]: >com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception >has occurred during the execution of the phase.
> Jul 27, 2010 3:48:22 AM [Error]: >com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) >[Thread[main,5,main]]: The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no >components for this system.
I can see in the log that stack xml you are using is not for the system to whom you are upgrading. That is the reason system is rejecting stack file. Please check above extract of logs.
I would suggest you to please generate stack xml file for this system from MOPZ after correctly configuring SMSY and use it. Then your problem will be resolved.
Thanks
Sunny
Maybe you are looking for
-
I have synced my iPhone numerous times and some of the memos in "Voice Memos" on my iPhone wont go over to my iTunes program on my computer. I have a folder titled "Voice Memos" on my iPhone and one of the same name on iTunes on my computer. But afte
-
How do I stop Numbers from changing my number data into a date?
I am trying to create a chart and some of the data ranges from 0-4, 5-9, 10-14, etc... When I enter 5-9 on a field, it automatically changes to May 9, 2012. Any help is appreciated.
-
401 Authentication in Apex 4.0
Hi, Is it possible to use 401 Authentication in Apex 4.0 and if yes then how to use ? Thanks, Vaibhav
-
Problem with Trinidad skinning
Hi, I'm a new Trinidad user and I'm unable to get the skinning to work. Maybe I did something wrong or forgot something. Trinidad tags are displayed in the webpage (but not skinned). I installed the skin "beach" from the demo, adding a block that wou
-
I am new to the oracle platform and wanted to learn more about the intermedia capabilities. In particular, I am looking to create a database containing images and text: nothing too heavy, about 40-70 of these types. Can anyone suggest a good tutorial