Error in Enabling Admin Status
1552 E Ap with a 2504 WLC. Single Root Ap with Mesh the Mesh has the problem. Both Power Injector and AP has been replaced . How do you turn on the 802.11 B Radio? No other problems at 40 other sites with identical installation.
Did you try other power source to isolate the issue. What's the MSG and trap log.
Check multiple power source section.
http://www.cisco.com/en/US/docs/wireless/access_point/1550/installation/guide/1550hig.pdf#page33
Similar Messages
-
Hi ,
We have 1242-AG series AP which is configured in Rogue Detector mode. After adding this AP to WLC its showing Admin Status of AP as Down.
When i am trying to enable the Admin Status its giving me following error
" Admin status cannot be enabled for AP in Rogue Detector mode".
Any suggestions on how to enable Admin Status for Rogue Detector AP.
Thanks
PrasadRogue Detection under Unified Wireless Networks
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080722d8c.shtml
This may help along with Steves answer -
Following instruction to reinstall iTunes, uninstalled iTunes and related components, verified all deleted. Need to delete C:\Program Files\Common Files\Apple\ manually, but am getting and error that says "Destination Folder Access Denied". I do have admin status on my user account. What's next? Many of the files in these directories are Mobile Me and iCloud, should I uninstall those too?
I have the same problem and it looks like others do too. I have spent far too much time trying to find a solution but nothing has worked so far.
Does "end windows explorer for the processing menu" mean to end explorer.exe in the processes window in Windows Task Manager? Does "start new task" means File-New Task in Windows Task Manager? If so, the solution does not work for me.
Any other suggestions would be deeply appreciated.
Thank you.
Cathy -
OID - LDAP:error code 19 -Admin domain
Exception creating Entry : javax.naming.directory.InvalidAttributeValueException: [LDAP: error code 19 - Admin domain does not contain schema information for objectclass person.]; remaining name 'cn=oriondes,ou=servidoresmiembro,ou=internos,cn=users,dc=superfinanciera,dc=gov,dc=co'
[LDAP: error code 19 - Admin domain does not contain schema information for objectclass person.]
javax.naming.directory.InvalidAttributeValueException: [LDAP: error code 19 - Admin domain does not contain schema information for objectclass person.]; remaining name 'cn=oriondes,ou=servidoresmiembro,ou=internos,cn=users,dc=superfinanciera,dc=gov,dc=co'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3001)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_createSubcontext(LdapCtx.java:777)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_createSubcontext(ComponentDirContext.java:319)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.createSubcontext(PartialCompositeDirContext.java:248)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.createSubcontext(PartialCompositeDirContext.java:236)
at javax.naming.directory.InitialDirContext.createSubcontext(InitialDirContext.java:176)
at oracle.ldap.odip.gsi.LDAPWriter.createEntry(LDAPWriter.java:1056)
at oracle.ldap.odip.gsi.LDAPWriter.insert(LDAPWriter.java:409)
at oracle.ldap.odip.gsi.LDAPWriter.modifyRadd(LDAPWriter.java:748)
at oracle.ldap.odip.gsi.LDAPWriter.writeChanges(LDAPWriter.java:335)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:581)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:306)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:186)
DIP_LDAPWRITER_ERROR_CREATE
DIP_LDAPWRITER_ERROR_CREATE
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:722)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:306)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:186)
DIP_LDAPWRITER_ERROR_CREATE
ActiveChgImp:Error in Mapping EngineDIP_LDAPWRITER_ERROR_CREATE
DIP_LDAPWRITER_ERROR_CREATE
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:741)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:306)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:186)
ActiveChgImp:about to Update exec status
Updated Attributes
orclodipLastExecutionTime: 20100906150632
orclodipConDirLastAppliedChgNum: 34086144
orclOdipSynchronizationStatus: Mapping Failure, Agent Execution Not AttemptedHi,
Please let me know if this has been resolved. Also, please post the solution if you find any.
-Mahendra. -
AP801 admin status is disable automatically after router reload
We've got cisco 887VGW with wireless AP801GN and registering to the controller 7510,
ap801 admin status is disable automatically after router reload.
Is there any opportunity to fix it?
AIR-CT7510-K9 os version: 7.6.100(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.6.100.0
RTOS Version..................................... 7.6.100.0
Bootloader Version............................... 7.3.101.0
Emergency Image Version.......................... 7.3.101.0
Build Type....................................... DATA + WPS
System Name...................................... CNDGIDCWLC01
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1295
Redundancy Mode.................................. SSO (Both AP and Client SSO)
IP Address....................................... 10.15.131.46
System Up Time................................... 3 days 3 hrs 40 mins 22 secs
System Timezone Location......................... (GMT +8:00) HongKong, Bejing, Chongquing
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... Multiple Countries:CN,HK,TH,US
--More-- or (q)uit
Operating Environment............................ Commercial (10 to 35 C)
Internal Temp Alarm Limits....................... 10 to 38 C
Internal Temperature............................. +22 C
Fan Status....................................... OK
RAID Volume Status............................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 2
Number of Active Clients......................... 6
Burned-in MAC Address............................ 64:9E:F3:65:2A:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 300
(Cisco Controller) >
Cisco IOS Software, AP801 Software (AP801-K9W8-M), Version 15.2(4)JB3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Wed 18-Dec-13 21:56 by prod_rel_team
ROM: Bootstrap program is AP801 boot loader
BOOTLDR: AP801 Boot Loader (AP801-BOOT-M) Version 12.4(23c)JX, RELEASE SOFTWARE (fc1)
NST6839 uptime is 4 hours, 32 minutes
System returned to ROM by power-on
System image file is "flash:/ap801-k9w8-mx.152-4.JB3/ap801-k9w8-mx.152-4.JB3"
Last reload reason:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AP801GN-A-K9 (PowerPC 8343) processor (revision B0) with 49142K/16384K bytes of memory.
Processor board ID FGL164624AL
PowerPC 8343 CPU at 400Mhz, revision number 0x0031
Last reset from power-on
LWAPP image version 7.6.100.0
1 Gigabit Ethernet interface
1 802.11 Radio
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 70:CA:9B:2F:49:30
Part Number : 73-11027-11
PCA Assembly Number : 800-28807-11
PCA Revision Number : B0
PCB Serial Number : FOC1634C1G6
Top Assembly Part Number : 800-33059-04
Top Assembly Serial Number : FGL164624AL
Top Revision Number : B0
Product/Model Number : AP801GN-A-K9
Configuration register is 0xF -
Sending job error message to admin by email
Hi everyone...
Anyone knows how to send job error message to admin by email? For example, if crawler failed, an email is sent to admin with the error message. I'm thinking of building windows service which run at the background and knows when a job fail and send the error message through email to admin.
Is there a better way?
Cheers,
Jefi Santosohi,
>>>Can this be achieved through BPM?
yes you can put your transformation step
and send step in a block and specify an exception
branch and catch all exceptions that will
occur during transformations and the send step
then you can send info from the exception branch to
any other system
you won't be able to catch the error's name
but you will be able to notify any thinrd party
about the error
more on error catching:
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
Regards,
michal -
Display error message in the status bar during PBO
Hi All,
I want to issue an error message on a program's selection-screen.
The thing is when I issue an error message inside PBO, all the text in the selection-screen are gone and replaced with lines.
So i displayed the error message in the status bar.
MESSAGE S074(Z4) DISPLAY LIKE 'E'.
But the problem with this is that it will allow to continue data processing.
What shall I do in order for my error message to behave as an error message and not as a status message?Hi,
Write your message in PAI same as you have done MESSAGE S074(Z4) DISPLAY LIKE 'E'.
after this use call screen 'your screen no'.
it will not lock the field. -
Display error message as as status message on the screen
Hi all,
How to display error message as as status message on the screen
The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it leave the current transaction.
if i display success message and use display like 'E' it display the error message but if i save it save the transaction.
i cannot use leave to screen also because of subscreen. if i use leave to screen system display set screen not allowed in subscreen.
so i want to stop the processing or do not allow the transaction to complete on the message.Hi
displaying error message like status message will help u?
try the below code
MESSAGE 'Error' TYPE 'E' DISPLAY LIKE 'S'.
cheers
shibu -
5 error while checking job status
Hi,
We are getting the following error when we are trying to check the status of the process chain through FM 'RSPC_API_CHAIN_GET_STATUS':
5 error while checking job status.
The real scenario is we are using an abap screen with a button on it. when the user clicks on the button we call the FM 'BP_EVENT_RAISE' to trigger the process chain. once the chain is triggered we are having an endless loop to monitor the status of the chain with FM 'RSPC_API_CHAIN_GET_STATUS' untill the chain status turns green ie G.
Now while monitoring the status it randomly throws me the above error. it seems to work sometimes and other times it gives the popup with the said error.
Can anybody help why we get the error.
Regards,
ShashankHi Shanshank,
Try to Debug the FM.
Rgds,
Ravi -
Material Master - Error M3 826 Maintenance status of field ... to screen
Hi Experts of the Material Master,
I am getting the error M3 826 "Maintenance status of field MARA-BEHVO does not correspond to status of screen K" when all screens are selected in the Create Material Master transaction.
Here is my situation: I have added the fields MARA-BEHVO and MARA-TEMPB both of status L (Storage) to a screen called "Phys. Characteristics", which has status K (Basic data).
This produces the error message above in standard SAP. I didn't want to change the customizing of the screen to allow L, because this screen is also used by other material types.
I had to copy the screen MGD1 2701 (Phys. Characteristics) to my custom program for Material Master screens anyhow, as the number of fields and their descriptions had to be adjusted.
The program was created using the activity "Create Program for User Subscreens" in SPRO.
in the coding of ZMGD1 screen 2701 I have added this code behind the standard module FELDAUSWAHL to manipulate the standard logic that would blend out L fields on a K screen.
LOOP AT SCREEN.
* Material Type
IF mara-mtart = 'ZPNT'.
* Screen-Names of the 3 fields
IF screen-name = 'MARA-TEMPB' OR
screen-name = 'MARA-BEHVO'.
screen-active = 1.
screen-invisible = 0.
screen-output = 1.
* Change or Create transaction
IF sy-tcode = 'JP27' OR sy-tcode = 'JP28'.
screen-input = 1.
screen-required = 1.
ENDIF. "transaction code JP27 or JP28
MODIFY SCREEN.
ENDIF. "screen-name
ENDIF. "Material Type ZPNT
ENDLOOP.
It all works fine when only a number of screens (but including the modified) screens are selected for creation.
But it fails with the message above on the modified screen when all screens are selected.
Any ideas?
Ralffrom the message, it appears that ZZKUNNR is a custom field attached to your MARA table. So, it is your System specific. I don't see ZZKUNNR available in MARA. If you look at the transaction code OMT3B (configuration for material master data screens), you can find K - Basic Data Screen in Maintenance Status field.
You may look in this area to fix your issue. Because yours is a custom field, its tough to analyse further.
Reward points, if it helps!
Regards -
Troubleshoot-Adapter engine:Error Setting the message status to DLNG failed
Dear Experts,
We use SAP RFC- PI-JDBC(MSSQL). here the Data(message) successfully transfered to mssql table but the status is been set to DLNG failed, And it finally shown as SYSTEM ERROR.
QoS required: ExactlyOnce , here The Message has got inserted in that particular table and in PI adapter the status turned to DLNG faild and the service again tries to send the same message which is not possible becoz the data is set for primary value.
2010-09-15 09:59:48 Success Message successfully received by messaging system. Profile: XI URL: http://XXXXX:50000/MessagingSystem/receive/AFW/XI Credential (User): YYYY
2010-09-15 09:59:48 Success Using connection JDBC_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2010-09-15 09:59:48 Success Message successfully put into the queue.
2010-09-15 09:59:48 Success The message was successfully retrieved from the receive queue.
2010-09-15 09:59:48 Error Setting the message status to TBDL failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Error updating status..
2010-09-15 09:59:48 Success Delivering to channel: CCR_JDBC_ZZZZZ
2010-09-15 09:59:48 Success MP: Entering module processor
2010-09-15 09:59:48 Success MP: Processing local module localejbs/CallSapAdapter
2010-09-15 09:59:48 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2010-09-15 09:59:48 Success JDBC adapter receiver channel CCR_JDBC_ZZZZZ : processing started; party , service BS_BCP_IMPLOG_ZZZZZ
2010-09-15 09:59:49 Success Database request processed successfully
2010-09-15 09:59:49 Success MP: Leaving module processor
2010-09-15 09:59:49 Success The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
2010-09-15 09:59:49 Error Setting the message status to DLNG failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Error updating status..
2010-09-15 10:37:01 Success The message was successfully retrieved from the receive queue.
2010-09-15 10:37:01 Success The message status set to DLNG.
2010-09-15 10:37:01 Success Delivering to channel: CCR_JDBC_ZZZZZ
2010-09-15 10:37:01 Success MP: Entering module processor
2010-09-15 10:37:01 Success MP: Processing local module localejbs/CallSapAdapter
2010-09-15 10:37:01 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2010-09-15 10:37:01 Success JDBC adapter receiver channel CCR_JDBC_ZZZZZ : processing started; party , service BS_BCP_IMPLOG_ZZZZZ
2010-09-15 10:37:01 Error Unable to execute statement for table or stored procedure. 'imp_log' (Structure 'STATEMENT') due to com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
2010-09-15 10:37:01 Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'imp_log' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
Thanks in advance for your valuable answer.Hi Vinaygam,
2010-09-15 10:37:01 Error Unable to execute statement for table or stored procedure. 'imp_log' (Structure 'STATEMENT') due to com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
2010-09-15 10:37:01 Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'imp_log' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
See above error, It cannot the Duplicate Key in your log table. Duplicate means repeated as a same data.So kindly check once your data.
IF,I assume your scenario is Synchronous, If you are using any sender JDBC adapter just check with your Quality of Service and set it to "Exactly once".
so kindly do it.
Thank you,
Sateesh
Edited by: sateesh kumar .N on Sep 17, 2010 8:17 AM -
How do I restore my Admin status for a program in Applications using 10.6.8
How do I restore my Admin status for a program in Applications using 10.6.8?
Is this the file that does not have the desired priveleges? I think that's correct. If so, then open Terminal in the Utilitie folder. At the prompt enter:
sudo chown -Rf root:admin [dragged file goes here]
Leave a space after "root:admin" and drag the file you need to change into the Terminal window. Press RETURN. You will be asked to enter your admin password. It will not be echoed to the screen so type carefully. Press RETURN again.
This will change the priveleges of the file to the default for the Applications folder. -
Error in enabler configuration:1003
Hi,
I have deployed a java application on Sun Application Server 7. I have registered it as an Partner Application in Portal(ver 10g-904).
The application logs in to OID.
When I click on login it throws error:
javax.servlet.ServletException: oracle.security.sso.enabler.SSOConfigException: Error in enabler configuration: 1003
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:471)
But after that if I refresh the page,it takes me to the correct page.
The same application deployed on websphere is working fine.
If any one can suggest what the problem can be, that will be great.
Thanks,
subhasishHi Teri!
Did you find any solution for this issue? I´m having the same problem in my environment.
Thanks in advance!
Evandro -
Further invastigating ther error mentioned here:
https://social.msdn.microsoft.com/Forums/azure/en-US/14afa50f-287d-4158-852a-c9532f9f30eb/test-published-web-service-experiment-error-with-status-code-400?forum=MachineLearning
I have made an even simpler experiment with two python scirpt modules. The experiment again runs fine in Azure ML Studio but fails in the web service test with the error
Error code: InternalError, Http status code: 500, Request id: 53eef674-190a-4f63-bdc6-a072a45a9c72, Timestamp: Fri, 24 Apr 2015 09:30:37 GMT
The experiment consists only of two python script modules. The code of the first module:
import numpy as np
import pandas as pd
def azureml_main(dataframe1 = None, dataframe2 = None):
dataframe1.loc[1] = ["U5000","resB",np.nan]
dataframe1.loc[2] = ["U5000","resC",2]
dataframe1.loc[3] = ["U5000","resD",2]
dataframe1.loc[4] = ["U5000","resE",np.nan]
dataframe1.loc[5] = ["U6000","resA",np.nan]
dataframe1.loc[6] = ["U6000","resB",1]
dataframe1.loc[7] = ["U6000","resC",2]
dataframe1.loc[8] = ["U6000","resD",np.nan]
dataframe1.loc[9] = ["U6000","resE",1]
dataframe1['hasRated'] = pd.Series(1, index=dataframe1.index).astype(bool)
df_new = pd.DataFrame()
df_new = pd.DataFrame(dataframe1[["restaurant","rating","hasRated"]])
return df_new,
The code of the second module that takes as input the result of the first module:
def azureml_main(dataframe1 = None, dataframe2 = None):
return dataframe1,
A url of a screenshot taken from the experiment.
http://i.imgur.com/4nrbneA.png
Please respond. Again I am using a free workspace of Azure ML Studio.
Thank you very muchThank you for your quick reply.
I hope you will be able to resolve this issue soon.
asavvopoulos -
Error code: InternalError, Http status code: 500 while testing an experiment
Creating a very simple experiment with just a Dataset, followed by a simple regresion using an Execute
R Task , I get an internal server error while testing the published experiment
Hitting run everything goes smooth and I can see all data,but when i hit 'test' from the web services dashboard
right after publishing,I get this:
Error code: InternalError, Http status code: 500, Request id: d87e2d01-16ef-4ac9-8a5d-a58d41aab2d4, Timestamp: Tue,
03 Mar 2015 12:19:55 GMT
How can I handle this ?
Thank you in advance.Hi Shreyas!
Are you familiar with the tryCatch() function in R? in your error condition, you can return the error message a bit more cleanly as shown in the following code snippet. FYI one common error we see is R scripts that are not able to handle a single-row input
or with mismatched data types.
tryCatch({
# Do what you want in here
maml.mapOutputPort("data.set");
}, error = function(e) {
data.set = data.frame(errormsg = conditionMessage(e))
print(conditionMessage(e));
maml.mapOutputPort("data.set");
Maybe you are looking for
-
How can I pass Flex Field value to the Call Wrap Up screen?
Hello helpers, I am trying to get a value from the 'Flex Field' passed over to the 'Call Wrap Up' screen by using Form Personalization. Oracle was configured by a subcontractor and therefore I do not know what the exact name of the textfield is in th
-
Noise in thermocouple measurement using PCI-6024E DAQ card
I am using a PCI-6024E DAQ card for thermocouple(TC) measurement. The TC is installed in the mold cavity of an injection molding (IM) machine. The leads from the TC are connected to the DAQ card using a CB-68LP board. I made a temperature mesurment
-
Access denied, random pages in CA
Hi folks. Yes another access denied issue, none of the existing threads have helped, and I need help. I'm getting on random CA pages Sorry, this site hasn't been shared with you. The account is the setup account, local admin, SQL SA, SharePoint Farm
-
Anybody can help me? We are going to implement EDI with on of our trading partner. We will send and receive EDI message file over the value added network. Anybody can guide me how we will propgate/manipulate this message into our database in oracle a
-
I am about four days into owning the C510 eStation. In the print app center, there is an app promoted for eDocs, which looks great! I can link to a page that even shows how documents would look! The problem is that there does not appear to be any wa